sctp: Sysctl configuration for IPv4 Address Scoping

This patch introduces a new sysctl option to make IPv4 Address Scoping
configurable <draft-stewart-tsvwg-sctp-ipv4-00.txt>.

In networking environments where DNAT rules in iptables prerouting
chains convert destination IP's to link-local/private IP addresses,
SCTP connections fail to establish as the INIT chunk is dropped by the
kernel due to address scope match failure.
For example to support overlapping IP addresses (same IP address with
different vlan id) a Layer-5 application listens on link local IP's,
and there is a DNAT rule that maps the destination IP to a link local
IP. Such applications never get the SCTP INIT if the address-scoping
draft is strictly followed.

This sysctl configuration allows SCTP to function in such
unconventional networking environments.

Sysctl options:
0 - Disable IPv4 address scoping draft altogether
1 - Enable IPv4 address scoping (default, current behavior)
2 - Enable address scoping but allow IPv4 private addresses in init/init-ack
3 - Enable address scoping but allow IPv4 link local address in init/init-ack
Signed-off-by: NBhaskar Dutta <bhaskar.dutta@globallogic.com>
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>

Documentation/networking/ip-sysctl.txt

@@ -1297,6 +1297,16 @@ sctp_rmem - vector of 3 INTEGERs: min, default, max
 sctp_wmem  - vector of 3 INTEGERs: min, default, max
 	See tcp_wmem for a description.
 
+addr_scope_policy - INTEGER
+	Control IPv4 address scoping - draft-stewart-tsvwg-sctp-ipv4-00
+
+	0   - Disable IPv4 address scoping
+	1   - Enable IPv4 address scoping
+	2   - Follow draft but allow IPv4 private addresses
+	3   - Follow draft but allow IPv4 link local addresses
+
+	Default: 1
+
 
 /proc/sys/net/core/*
 dev_weight - INTEGER

include/net/sctp/constants.h

@@ -363,6 +363,13 @@ typedef enum {
 	SCTP_SCOPE_UNUSABLE,		/* IPv4 unusable addresses */
 } sctp_scope_t;
 
+typedef enum {
+	SCTP_SCOPE_POLICY_DISABLE,	/* Disable IPv4 address scoping */
+	SCTP_SCOPE_POLICY_ENABLE,	/* Enable IPv4 address scoping */
+	SCTP_SCOPE_POLICY_PRIVATE,	/* Follow draft but allow IPv4 private addresses */
+	SCTP_SCOPE_POLICY_LINK,		/* Follow draft but allow IPv4 link local addresses */
+} sctp_scope_policy_t;
+
 /* Based on IPv4 scoping <draft-stewart-tsvwg-sctp-ipv4-00.txt>,
  * SCTP IPv4 unusable addresses: 0.0.0.0/8, 224.0.0.0/4, 198.18.0.0/24,
  * 192.88.99.0/24.

include/net/sctp/structs.h

@@ -219,6 +219,15 @@ extern struct sctp_globals {
 	/* Flag to idicate if SCTP-AUTH is enabled */
 	int auth_enable;
 
+	/*
+	 * Policy to control SCTP IPv4 address scoping
+	 * 0   - Disable IPv4 address scoping
+	 * 1   - Enable IPv4 address scoping
+	 * 2   - Selectively allow only IPv4 private addresses
+	 * 3   - Selectively allow only IPv4 link local address
+	 */
+	int ipv4_scope_policy;
+
 	/* Flag to indicate whether computing and verifying checksum
 	 * is disabled. */
         int checksum_disable;
@@ -252,6 +261,7 @@ extern struct sctp_globals {
 #define sctp_port_hashtable		(sctp_globals.port_hashtable)
 #define sctp_local_addr_list		(sctp_globals.local_addr_list)
 #define sctp_local_addr_lock		(sctp_globals.addr_list_lock)
+#define sctp_scope_policy		(sctp_globals.ipv4_scope_policy)
 #define sctp_addip_enable		(sctp_globals.addip_enable)
 #define sctp_addip_noauth		(sctp_globals.addip_noauth_enable)
 #define sctp_prsctp_enable		(sctp_globals.prsctp_enable)

net/sctp/bind_addr.c

@@ -510,9 +510,28 @@ int sctp_in_scope(const union sctp_addr *addr, sctp_scope_t scope)
 	 * of requested destination address, sender and receiver
 	 * SHOULD include all of its addresses with level greater
 	 * than or equal to L.
+	 *
+	 * Address scoping can be selectively controlled via sysctl
+	 * option
 	 */
-	if (addr_scope <= scope)
+	switch (sctp_scope_policy) {
+	case SCTP_SCOPE_POLICY_DISABLE:
 		return 1;
+	case SCTP_SCOPE_POLICY_ENABLE:
+		if (addr_scope <= scope)
+			return 1;
+		break;
+	case SCTP_SCOPE_POLICY_PRIVATE:
+		if (addr_scope <= scope || SCTP_SCOPE_PRIVATE == addr_scope)
+			return 1;
+		break;
+	case SCTP_SCOPE_POLICY_LINK:
+		if (addr_scope <= scope || SCTP_SCOPE_LINK == addr_scope)
+			return 1;
+		break;
+	default:
+		break;
+	}
 
 	return 0;
 }

net/sctp/protocol.c

@@ -431,16 +431,14 @@ static int sctp_v4_available(union sctp_addr *addr, struct sctp_sock *sp)
  * of requested destination address, sender and receiver
  * SHOULD include all of its addresses with level greater
  * than or equal to L.
+ *
+ * IPv4 scoping can be controlled through sysctl option
+ * net.sctp.addr_scope_policy
  */
 static sctp_scope_t sctp_v4_scope(union sctp_addr *addr)
 {
 	sctp_scope_t retval;
 
-	/* Should IPv4 scoping be a sysctl configurable option
-	 * so users can turn it off (default on) for certain
-	 * unconventional networking environments?
-	 */
-
 	/* Check for unusable SCTP addresses. */
 	if (IS_IPV4_UNUSABLE_ADDRESS(addr->v4.sin_addr.s_addr)) {
 		retval =  SCTP_SCOPE_UNUSABLE;
@@ -1259,6 +1257,9 @@ SCTP_STATIC __init int sctp_init(void)
 	/* Disable AUTH by default. */
 	sctp_auth_enable = 0;
 
+	/* Set SCOPE policy to enabled */
+	sctp_scope_policy = SCTP_SCOPE_POLICY_ENABLE;
+
 	sctp_sysctl_register();
 
 	INIT_LIST_HEAD(&sctp_address_families);

net/sctp/sysctl.c

@@ -51,6 +51,7 @@ static int timer_max = 86400000; /* ms in one day */
 static int int_max = INT_MAX;
 static int sack_timer_min = 1;
 static int sack_timer_max = 500;
+static int addr_scope_max = 3; /* check sctp_scope_policy_t in include/net/sctp/constants.h for max entries */
 
 extern int sysctl_sctp_mem[3];
 extern int sysctl_sctp_rmem[3];
@@ -272,6 +273,17 @@ static ctl_table sctp_table[] = {
 		.proc_handler	= proc_dointvec,
 		.strategy	= sysctl_intvec
 	},
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "addr_scope_policy",
+		.data		= &sctp_scope_policy,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec_minmax,
+		.strategy	= &sysctl_intvec,
+		.extra1		= &zero,
+		.extra2		= &addr_scope_max,
+	},
 	{ .ctl_name = 0 }
 };