[ARM] netwinder: clean up GPIO naming

Netwinder was using gpio_xxx names which could clash with the GPIO
layer.  Add a 'nw_' prefix to ensure that these remain separate.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-footbridge/cats-hw.c

@@ -10,6 +10,7 @@
 #include <linux/init.h>
 #include <linux/screen_info.h>
 #include <linux/io.h>
+#include <linux/spinlock.h>
 
 #include <asm/hardware/dec21285.h>
 #include <asm/mach-types.h>

arch/arm/mach-footbridge/common.c

@@ -14,6 +14,7 @@
 #include <linux/list.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/spinlock.h>
  
 #include <asm/pgtable.h>
 #include <asm/page.h>

arch/arm/mach-footbridge/dc21285-timer.c

@@ -7,6 +7,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/spinlock.h>
 
 #include <asm/irq.h>
 

arch/arm/mach-footbridge/dc21285.c

@@ -17,6 +17,7 @@
 #include <linux/ioport.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/spinlock.h>
 
 #include <asm/irq.h>
 #include <asm/system.h>

arch/arm/mach-footbridge/dma.c

@@ -12,6 +12,7 @@
  */
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/spinlock.h>
 
 #include <asm/dma.h>
 #include <asm/scatterlist.h>

arch/arm/mach-footbridge/ebsa285.c

@@ -4,6 +4,7 @@
  * EBSA285 machine fixup
  */
 #include <linux/init.h>
+#include <linux/spinlock.h>
 
 #include <asm/hardware/dec21285.h>
 #include <asm/mach-types.h>

arch/arm/mach-footbridge/include/mach/hardware.h

@@ -86,10 +86,11 @@
 #define CPLD_FLASH_WR_ENABLE	1
 
 #ifndef __ASSEMBLY__
-extern void gpio_modify_op(int mask, int set);
-extern void gpio_modify_io(int mask, int in);
-extern int  gpio_read(void);
-extern void cpld_modify(int mask, int set);
+extern spinlock_t nw_gpio_lock;
+extern void nw_gpio_modify_op(unsigned int mask, unsigned int set);
+extern void nw_gpio_modify_io(unsigned int mask, unsigned int in);
+extern unsigned int nw_gpio_read(void);
+extern void nw_cpld_modify(unsigned int mask, unsigned int set);
 #endif
 
 #define pcibios_assign_all_busses()	1

arch/arm/mach-footbridge/isa-irq.c

@@ -19,6 +19,7 @@
 #include <linux/list.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/spinlock.h>
 
 #include <asm/mach/irq.h>
 

arch/arm/mach-footbridge/netwinder-hw.c

@@ -11,6 +11,7 @@
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/spinlock.h>
 
 #include <asm/hardware/dec21285.h>
 #include <asm/leds.h>
@@ -67,13 +68,14 @@ static inline void wb977_ww(int reg, int val)
 /*
  * This is a lock for accessing ports GP1_IO_BASE and GP2_IO_BASE
  */
-DEFINE_SPINLOCK(gpio_lock);
+DEFINE_SPINLOCK(nw_gpio_lock);
+EXPORT_SYMBOL(nw_gpio_lock);
 
 static unsigned int current_gpio_op;
 static unsigned int current_gpio_io;
 static unsigned int current_cpld;
 
-void gpio_modify_op(int mask, int set)
+void nw_gpio_modify_op(unsigned int mask, unsigned int set)
 {
 	unsigned int new_gpio, changed;
 
@@ -86,6 +88,7 @@ void gpio_modify_op(int mask, int set)
 	if (changed & 0xff00)
 		outb(new_gpio >> 8, GP2_IO_BASE);
 }
+EXPORT_SYMBOL(nw_gpio_modify_op);
 
 static inline void __gpio_modify_io(int mask, int in)
 {
@@ -118,7 +121,7 @@ static inline void __gpio_modify_io(int mask, int in)
 	}
 }
 
-void gpio_modify_io(int mask, int in)
+void nw_gpio_modify_io(unsigned int mask, unsigned int in)
 {
 	/* Open up the SuperIO chip */
 	wb977_open();
@@ -128,11 +131,13 @@ void gpio_modify_io(int mask, int in)
 	/* Close up the EFER gate */
 	wb977_close();
 }
+EXPORT_SYMBOL(nw_gpio_modify_io);
 
-int gpio_read(void)
+unsigned int nw_gpio_read(void)
 {
 	return inb(GP1_IO_BASE) | inb(GP2_IO_BASE) << 8;
 }
+EXPORT_SYMBOL(nw_gpio_read);
 
 /*
  * Initialise the Winbond W83977F global registers
@@ -322,9 +327,9 @@ static inline void wb977_init_gpio(void)
 	/*
 	 * Set Group1/Group2 outputs
 	 */
-	spin_lock_irqsave(&gpio_lock, flags);
-	gpio_modify_op(-1, GPIO_RED_LED | GPIO_FAN);
-	spin_unlock_irqrestore(&gpio_lock, flags);
+	spin_lock_irqsave(&nw_gpio_lock, flags);
+	nw_gpio_modify_op(-1, GPIO_RED_LED | GPIO_FAN);
+	spin_unlock_irqrestore(&nw_gpio_lock, flags);
 }
 
 /*
@@ -359,34 +364,35 @@ static void __init wb977_init(void)
 	wb977_close();
 }
 
-void cpld_modify(int mask, int set)
+void nw_cpld_modify(unsigned int mask, unsigned int set)
 {
 	int msk;
 
 	current_cpld = (current_cpld & ~mask) | set;
 
-	gpio_modify_io(GPIO_DATA | GPIO_IOCLK | GPIO_IOLOAD, 0);
-	gpio_modify_op(GPIO_IOLOAD, 0);
+	nw_gpio_modify_io(GPIO_DATA | GPIO_IOCLK | GPIO_IOLOAD, 0);
+	nw_gpio_modify_op(GPIO_IOLOAD, 0);
 
 	for (msk = 8; msk; msk >>= 1) {
 		int bit = current_cpld & msk;
 
-		gpio_modify_op(GPIO_DATA | GPIO_IOCLK, bit ? GPIO_DATA : 0);
-		gpio_modify_op(GPIO_IOCLK, GPIO_IOCLK);
+		nw_gpio_modify_op(GPIO_DATA | GPIO_IOCLK, bit ? GPIO_DATA : 0);
+		nw_gpio_modify_op(GPIO_IOCLK, GPIO_IOCLK);
 	}
 
-	gpio_modify_op(GPIO_IOCLK|GPIO_DATA, 0);
-	gpio_modify_op(GPIO_IOLOAD|GPIO_DSCLK, GPIO_IOLOAD|GPIO_DSCLK);
-	gpio_modify_op(GPIO_IOLOAD, 0);
+	nw_gpio_modify_op(GPIO_IOCLK|GPIO_DATA, 0);
+	nw_gpio_modify_op(GPIO_IOLOAD|GPIO_DSCLK, GPIO_IOLOAD|GPIO_DSCLK);
+	nw_gpio_modify_op(GPIO_IOLOAD, 0);
 }
+EXPORT_SYMBOL(nw_cpld_modify);
 
 static void __init cpld_init(void)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&gpio_lock, flags);
-	cpld_modify(-1, CPLD_UNMUTE | CPLD_7111_DISABLE);
-	spin_unlock_irqrestore(&gpio_lock, flags);
+	spin_lock_irqsave(&nw_gpio_lock, flags);
+	nw_cpld_modify(-1, CPLD_UNMUTE | CPLD_7111_DISABLE);
+	spin_unlock_irqrestore(&nw_gpio_lock, flags);
 }
 
 static unsigned char rwa_unlock[] __initdata =
@@ -596,12 +602,6 @@ static void __init rwa010_init(void)
 	rwa010_soundblaster_reset();
 }
 
-EXPORT_SYMBOL(gpio_lock);
-EXPORT_SYMBOL(gpio_modify_op);
-EXPORT_SYMBOL(gpio_modify_io);
-EXPORT_SYMBOL(cpld_modify);
-EXPORT_SYMBOL(gpio_read);
-
 /*
  * Initialise any other hardware after we've got the PCI bus
  * initialised.  We may need the PCI bus to talk to this other
@@ -616,9 +616,9 @@ static int __init nw_hw_init(void)
 		cpld_init();
 		rwa010_init();
 
-		spin_lock_irqsave(&gpio_lock, flags);
-		gpio_modify_op(GPIO_RED_LED|GPIO_GREEN_LED, DEFAULT_LEDS);
-		spin_unlock_irqrestore(&gpio_lock, flags);
+		spin_lock_irqsave(&nw_gpio_lock, flags);
+		nw_gpio_modify_op(GPIO_RED_LED|GPIO_GREEN_LED, DEFAULT_LEDS);
+		spin_unlock_irqrestore(&nw_gpio_lock, flags);
 	}
 	return 0;
 }

arch/arm/mach-footbridge/netwinder-leds.c

@@ -32,7 +32,6 @@ static char led_state;
 static char hw_led_state;
 
 static DEFINE_SPINLOCK(leds_lock);
-extern spinlock_t gpio_lock;
 
 static void netwinder_leds_event(led_event_t evt)
 {
@@ -121,9 +120,9 @@ static void netwinder_leds_event(led_event_t evt)
 	spin_unlock_irqrestore(&leds_lock, flags);
 
 	if  (led_state & LED_STATE_ENABLED) {
-		spin_lock_irqsave(&gpio_lock, flags);
-		gpio_modify_op(GPIO_RED_LED | GPIO_GREEN_LED, hw_led_state);
-		spin_unlock_irqrestore(&gpio_lock, flags);
+		spin_lock_irqsave(&nw_gpio_lock, flags);
+		nw_gpio_modify_op(GPIO_RED_LED | GPIO_GREEN_LED, hw_led_state);
+		spin_unlock_irqrestore(&nw_gpio_lock, flags);
 	}
 }
 

arch/arm/mach-footbridge/personal.c

@@ -4,6 +4,7 @@
  * Personal server (Skiff) machine fixup
  */
 #include <linux/init.h>
+#include <linux/spinlock.h>
 
 #include <asm/hardware/dec21285.h>
 #include <asm/mach-types.h>

drivers/char/ds1620.c

@@ -43,52 +43,51 @@ static const char *fan_state[] = { "off", "on", "on (hardwired)" };
  *  chance that the WaveArtist driver could touch these bits to
  *  enable or disable the speaker.
  */
-extern spinlock_t gpio_lock;
 extern unsigned int system_rev;
 
 static inline void netwinder_ds1620_set_clk(int clk)
 {
-	gpio_modify_op(GPIO_DSCLK, clk ? GPIO_DSCLK : 0);
+	nw_gpio_modify_op(GPIO_DSCLK, clk ? GPIO_DSCLK : 0);
 }
 
 static inline void netwinder_ds1620_set_data(int dat)
 {
-	gpio_modify_op(GPIO_DATA, dat ? GPIO_DATA : 0);
+	nw_gpio_modify_op(GPIO_DATA, dat ? GPIO_DATA : 0);
 }
 
 static inline int netwinder_ds1620_get_data(void)
 {
-	return gpio_read() & GPIO_DATA;
+	return nw_gpio_read() & GPIO_DATA;
 }
 
 static inline void netwinder_ds1620_set_data_dir(int dir)
 {
-	gpio_modify_io(GPIO_DATA, dir ? GPIO_DATA : 0);
+	nw_gpio_modify_io(GPIO_DATA, dir ? GPIO_DATA : 0);
 }
 
 static inline void netwinder_ds1620_reset(void)
 {
-	cpld_modify(CPLD_DS_ENABLE, 0);
-	cpld_modify(CPLD_DS_ENABLE, CPLD_DS_ENABLE);
+	nw_cpld_modify(CPLD_DS_ENABLE, 0);
+	nw_cpld_modify(CPLD_DS_ENABLE, CPLD_DS_ENABLE);
 }
 
 static inline void netwinder_lock(unsigned long *flags)
 {
-	spin_lock_irqsave(&gpio_lock, *flags);
+	spin_lock_irqsave(&nw_gpio_lock, *flags);
 }
 
 static inline void netwinder_unlock(unsigned long *flags)
 {
-	spin_unlock_irqrestore(&gpio_lock, *flags);
+	spin_unlock_irqrestore(&nw_gpio_lock, *flags);
 }
 
 static inline void netwinder_set_fan(int i)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&gpio_lock, flags);
-	gpio_modify_op(GPIO_FAN, i ? GPIO_FAN : 0);
-	spin_unlock_irqrestore(&gpio_lock, flags);
+	spin_lock_irqsave(&nw_gpio_lock, flags);
+	nw_gpio_modify_op(GPIO_FAN, i ? GPIO_FAN : 0);
+	spin_unlock_irqrestore(&nw_gpio_lock, flags);
 }
 
 static inline int netwinder_get_fan(void)
@@ -96,7 +95,7 @@ static inline int netwinder_get_fan(void)
 	if ((system_rev & 0xf000) == 0x4000)
 		return FAN_ALWAYS_ON;
 
-	return (gpio_read() & GPIO_FAN) ? FAN_ON : FAN_OFF;
+	return (nw_gpio_read() & GPIO_FAN) ? FAN_ON : FAN_OFF;
 }
 
 /*

drivers/char/nwflash.c

@@ -58,8 +58,6 @@ static volatile unsigned char *FLASH_BASE;
 static int gbFlashSize = KFLASH_SIZE;
 static DEFINE_MUTEX(nwflash_mutex);
 
-extern spinlock_t gpio_lock;
-
 static int get_flash_id(void)
 {
 	volatile unsigned int c1, c2;
@@ -616,9 +614,9 @@ static void kick_open(void)
 	 * we want to write a bit pattern XXX1 to Xilinx to enable
 	 * the write gate, which will be open for about the next 2ms.
 	 */
-	spin_lock_irqsave(&gpio_lock, flags);
-	cpld_modify(1, 1);
-	spin_unlock_irqrestore(&gpio_lock, flags);
+	spin_lock_irqsave(&nw_gpio_lock, flags);
+	nw_cpld_modify(CPLD_FLASH_WR_ENABLE, CPLD_FLASH_WR_ENABLE);
+	spin_unlock_irqrestore(&nw_gpio_lock, flags);
 
 	/*
 	 * let the ISA bus to catch on...

drivers/mtd/maps/dc21285.c

@@ -32,16 +32,15 @@ static struct mtd_info *dc21285_mtd;
  */
 static void nw_en_write(void)
 {
-	extern spinlock_t gpio_lock;
 	unsigned long flags;
 
 	/*
 	 * we want to write a bit pattern XXX1 to Xilinx to enable
 	 * the write gate, which will be open for about the next 2ms.
 	 */
-	spin_lock_irqsave(&gpio_lock, flags);
-	cpld_modify(1, 1);
-	spin_unlock_irqrestore(&gpio_lock, flags);
+	spin_lock_irqsave(&nw_gpio_lock, flags);
+	nw_cpld_modify(CPLD_FLASH_WR_ENABLE, CPLD_FLASH_WR_ENABLE);
+	spin_unlock_irqrestore(&nw_gpio_lock, flags);
 
 	/*
 	 * let the ISA bus to catch on...

sound/oss/waveartist.c

@@ -1483,16 +1483,14 @@ static void __exit unload_waveartist(struct address_info *hw)
 #define VNC_HANDSET_DETECT	0x40
 #define VNC_DISABLE_AUTOSWITCH	0x80
 
-extern spinlock_t gpio_lock;
-
 static inline void
 vnc_mute_spkr(wavnc_info *devc)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&gpio_lock, flags);
-	cpld_modify(CPLD_UNMUTE, devc->spkr_mute_state ? 0 : CPLD_UNMUTE);
-	spin_unlock_irqrestore(&gpio_lock, flags);
+	spin_lock_irqsave(&nw_gpio_lock, flags);
+	nw_cpld_modify(CPLD_UNMUTE, devc->spkr_mute_state ? 0 : CPLD_UNMUTE);
+	spin_unlock_irqrestore(&nw_gpio_lock, flags);
 }
 
 static void