提交 70958576 编写于 作者: B Bob Moore 提交者: Len Brown

ACPICA: Split sleep/wake functions into two files

The functions for the original/legacy sleep/wake registers are in
hwsleep.c, and the functions for the new extended FADT V5 sleep
registers are in hwesleep.c
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLin Ming <ming.m.lin@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>
上级 f99648b1
......@@ -68,6 +68,7 @@ acpi-y += \
acpi-y += \
hwacpi.o \
hwesleep.o \
hwgpe.o \
hwpci.o \
hwregs.o \
......
......@@ -81,22 +81,25 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value);
acpi_status acpi_hw_clear_acpi_status(void);
/*
* hwsleep - sleep/wake support
* hwsleep - sleep/wake support (Legacy sleep registers)
*/
acpi_status acpi_hw_legacy_sleep(u8 sleep_state);
acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state);
acpi_status acpi_hw_legacy_wake(u8 sleep_state);
/*
* hwesleep - sleep/wake support (Extended FADT-V5 sleep registers)
*/
void acpi_hw_execute_sleep_method(char *method_name, u32 integer_argument);
acpi_status acpi_hw_extended_sleep(u8 sleep_state);
acpi_status acpi_hw_legacy_sleep(u8 sleep_state);
acpi_status acpi_hw_extended_wake_prep(u8 sleep_state);
acpi_status acpi_hw_extended_wake(u8 sleep_state);
acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state);
acpi_status acpi_hw_legacy_wake(u8 sleep_state);
/*
* hwvalid - Port I/O with validation
*/
......
/******************************************************************************
*
* Name: hwesleep.c - ACPI Hardware Sleep/Wake Support functions for the
* extended FADT-V5 sleep registers.
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include "accommon.h"
#include <linux/module.h>
#define _COMPONENT ACPI_HARDWARE
ACPI_MODULE_NAME("hwesleep")
static unsigned int gts, bfs;
module_param(gts, uint, 0644);
module_param(bfs, uint, 0644);
MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend.");
MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".);
/*******************************************************************************
*
* FUNCTION: acpi_hw_execute_sleep_method
*
* PARAMETERS: method_name - Pathname of method to execute
* integer_argument - Argument to pass to the method
*
* RETURN: None
*
* DESCRIPTION: Execute a sleep/wake related method with one integer argument
* and no return value.
*
******************************************************************************/
void acpi_hw_execute_sleep_method(char *method_name, u32 integer_argument)
{
struct acpi_object_list arg_list;
union acpi_object arg;
acpi_status status;
ACPI_FUNCTION_TRACE(hw_execute_sleep_method);
if (!ACPI_STRCMP(METHOD_NAME__GTS, method_name) && !gts)
return_VOID;
if (!ACPI_STRCMP(METHOD_NAME__BFS, method_name) && !bfs)
return_VOID;
/* One argument, integer_argument; No return value expected */
arg_list.count = 1;
arg_list.pointer = &arg;
arg.type = ACPI_TYPE_INTEGER;
arg.integer.value = (u64)integer_argument;
status = acpi_evaluate_object(NULL, method_name, &arg_list, NULL);
if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
ACPI_EXCEPTION((AE_INFO, status, "While executing method %s",
method_name));
}
return_VOID;
}
/*******************************************************************************
*
* FUNCTION: acpi_hw_extended_sleep
*
* PARAMETERS: sleep_state - Which sleep state to enter
*
* RETURN: Status
*
* DESCRIPTION: Enter a system sleep state via the extended FADT sleep
* registers (V5 FADT).
* THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
*
******************************************************************************/
acpi_status acpi_hw_extended_sleep(u8 sleep_state)
{
acpi_status status;
u8 sleep_type_value;
u64 sleep_status;
ACPI_FUNCTION_TRACE(hw_extended_sleep);
/* Extended sleep registers must be valid */
if (!acpi_gbl_FADT.sleep_control.address ||
!acpi_gbl_FADT.sleep_status.address) {
return_ACPI_STATUS(AE_NOT_EXIST);
}
/* Clear wake status (WAK_STS) */
status = acpi_write(ACPI_X_WAKE_STATUS, &acpi_gbl_FADT.sleep_status);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
acpi_gbl_system_awake_and_running = FALSE;
/* Execute the _GTS method (Going To Sleep) */
acpi_hw_execute_sleep_method(METHOD_NAME__GTS, sleep_state);
/* Flush caches, as per ACPI specification */
ACPI_FLUSH_CPU_CACHE();
/*
* Set the SLP_TYP and SLP_EN bits.
*
* Note: We only use the first value returned by the \_Sx method
* (acpi_gbl_sleep_type_a) - As per ACPI specification.
*/
ACPI_DEBUG_PRINT((ACPI_DB_INIT,
"Entering sleep state [S%u]\n", sleep_state));
sleep_type_value =
((acpi_gbl_sleep_type_a << ACPI_X_SLEEP_TYPE_POSITION) &
ACPI_X_SLEEP_TYPE_MASK);
status = acpi_write((sleep_type_value | ACPI_X_SLEEP_ENABLE),
&acpi_gbl_FADT.sleep_control);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/* Wait for transition back to Working State */
do {
status = acpi_read(&sleep_status, &acpi_gbl_FADT.sleep_status);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
} while (!(((u8)sleep_status) & ACPI_X_WAKE_STATUS));
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_hw_extended_wake_prep
*
* PARAMETERS: sleep_state - Which sleep state we just exited
*
* RETURN: Status
*
* DESCRIPTION: Perform first part of OS-independent ACPI cleanup after
* a sleep. Called with interrupts ENABLED.
*
******************************************************************************/
acpi_status acpi_hw_extended_wake_prep(u8 sleep_state)
{
acpi_status status;
u8 sleep_type_value;
ACPI_FUNCTION_TRACE(hw_extended_wake_prep);
status = acpi_get_sleep_type_data(ACPI_STATE_S0,
&acpi_gbl_sleep_type_a,
&acpi_gbl_sleep_type_b);
if (ACPI_SUCCESS(status)) {
sleep_type_value =
((acpi_gbl_sleep_type_a << ACPI_X_SLEEP_TYPE_POSITION) &
ACPI_X_SLEEP_TYPE_MASK);
(void)acpi_write((sleep_type_value | ACPI_X_SLEEP_ENABLE),
&acpi_gbl_FADT.sleep_control);
}
acpi_hw_execute_sleep_method(METHOD_NAME__BFS, sleep_state);
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_hw_extended_wake
*
* PARAMETERS: sleep_state - Which sleep state we just exited
*
* RETURN: Status
*
* DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep
* Called with interrupts ENABLED.
*
******************************************************************************/
acpi_status acpi_hw_extended_wake(u8 sleep_state)
{
ACPI_FUNCTION_TRACE(hw_extended_wake);
/* Ensure enter_sleep_state_prep -> enter_sleep_state ordering */
acpi_gbl_sleep_type_a = ACPI_SLEEP_TYPE_INVALID;
/* Execute the wake methods */
acpi_hw_execute_sleep_method(METHOD_NAME__SST, ACPI_SST_WAKING);
acpi_hw_execute_sleep_method(METHOD_NAME__WAK, sleep_state);
/*
* Some BIOS code assumes that WAK_STS will be cleared on resume
* and use it to determine whether the system is rebooting or
* resuming. Clear WAK_STS for compatibility.
*/
(void)acpi_write(ACPI_X_WAKE_STATUS, &acpi_gbl_FADT.sleep_status);
acpi_gbl_system_awake_and_running = TRUE;
acpi_hw_execute_sleep_method(METHOD_NAME__SST, ACPI_SST_WORKING);
return_ACPI_STATUS(AE_OK);
}
/******************************************************************************
*
* Name: hwsleep.c - ACPI Hardware Sleep/Wake Support Functions
* Name: hwsleep.c - ACPI Hardware Sleep/Wake Support functions for the
* original/legacy sleep/PM registers.
*
*****************************************************************************/
......@@ -49,56 +50,7 @@
#define _COMPONENT ACPI_HARDWARE
ACPI_MODULE_NAME("hwsleep")
static unsigned int gts, bfs;
module_param(gts, uint, 0644);
module_param(bfs, uint, 0644);
MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend.");
MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".);
/*******************************************************************************
*
* FUNCTION: acpi_hw_execute_sleep_method
*
* PARAMETERS: method_name - Pathname of method to execute
* integer_argument - Argument to pass to the method
*
* RETURN: None
*
* DESCRIPTION: Execute a sleep/wake related method, with one integer argument
* and no return value.
*
******************************************************************************/
void acpi_hw_execute_sleep_method(char *method_name, u32 integer_argument)
{
struct acpi_object_list arg_list;
union acpi_object arg;
acpi_status status;
ACPI_FUNCTION_TRACE(hw_execute_sleep_method);
if (!ACPI_STRCMP(METHOD_NAME__GTS, method_name) && !gts)
return_VOID;
if (!ACPI_STRCMP(METHOD_NAME__BFS, method_name) && !bfs)
return_VOID;
/* One argument, integer_argument */
arg_list.count = 1;
arg_list.pointer = &arg;
arg.type = ACPI_TYPE_INTEGER;
arg.integer.value = (u64)integer_argument;
status = acpi_evaluate_object(NULL, method_name, &arg_list, NULL);
if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
ACPI_EXCEPTION((AE_INFO, status, "While executing method %s",
method_name));
}
return_VOID;
}
#if (!ACPI_REDUCED_HARDWARE)
#if (!ACPI_REDUCED_HARDWARE) /* Entire module */
/*******************************************************************************
*
* FUNCTION: acpi_hw_legacy_sleep
......@@ -111,7 +63,6 @@ void acpi_hw_execute_sleep_method(char *method_name, u32 integer_argument)
* THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
*
******************************************************************************/
acpi_status acpi_hw_legacy_sleep(u8 sleep_state)
{
struct acpi_bit_register_info *sleep_type_reg_info;
......@@ -415,155 +366,3 @@ acpi_status acpi_hw_legacy_wake(u8 sleep_state)
}
#endif /* !ACPI_REDUCED_HARDWARE */
/*******************************************************************************
*
* FUNCTION: acpi_hw_extended_sleep
*
* PARAMETERS: sleep_state - Which sleep state to enter
*
* RETURN: Status
*
* DESCRIPTION: Enter a system sleep state via the extended FADT sleep
* registers (V5 FADT).
* THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
*
******************************************************************************/
acpi_status acpi_hw_extended_sleep(u8 sleep_state)
{
acpi_status status;
u8 sleep_type_value;
u64 sleep_status;
ACPI_FUNCTION_TRACE(hw_extended_sleep);
/* Extended sleep registers must be valid */
if (!acpi_gbl_FADT.sleep_control.address ||
!acpi_gbl_FADT.sleep_status.address) {
return_ACPI_STATUS(AE_NOT_EXIST);
}
/* Clear wake status (WAK_STS) */
status = acpi_write(ACPI_X_WAKE_STATUS, &acpi_gbl_FADT.sleep_status);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
acpi_gbl_system_awake_and_running = FALSE;
/* Execute the _GTS method (Going To Sleep) */
acpi_hw_execute_sleep_method(METHOD_NAME__GTS, sleep_state);
/* Flush caches, as per ACPI specification */
ACPI_FLUSH_CPU_CACHE();
/*
* Set the SLP_TYP and SLP_EN bits.
*
* Note: We only use the first value returned by the \_Sx method
* (acpi_gbl_sleep_type_a) - As per ACPI specification.
*/
ACPI_DEBUG_PRINT((ACPI_DB_INIT,
"Entering sleep state [S%u]\n", sleep_state));
sleep_type_value =
((acpi_gbl_sleep_type_a << ACPI_X_SLEEP_TYPE_POSITION) &
ACPI_X_SLEEP_TYPE_MASK);
status = acpi_write((sleep_type_value | ACPI_X_SLEEP_ENABLE),
&acpi_gbl_FADT.sleep_control);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/* Wait for transition back to Working State */
do {
status = acpi_read(&sleep_status, &acpi_gbl_FADT.sleep_status);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
} while (!(((u8)sleep_status) & ACPI_X_WAKE_STATUS));
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_hw_extended_wake_prep
*
* PARAMETERS: sleep_state - Which sleep state we just exited
*
* RETURN: Status
*
* DESCRIPTION: Perform first part of OS-independent ACPI cleanup after
* a sleep. Called with interrupts ENABLED.
*
******************************************************************************/
acpi_status acpi_hw_extended_wake_prep(u8 sleep_state)
{
acpi_status status;
u8 sleep_type_value;
ACPI_FUNCTION_TRACE(hw_extended_wake_prep);
status = acpi_get_sleep_type_data(ACPI_STATE_S0,
&acpi_gbl_sleep_type_a,
&acpi_gbl_sleep_type_b);
if (ACPI_SUCCESS(status)) {
sleep_type_value =
((acpi_gbl_sleep_type_a << ACPI_X_SLEEP_TYPE_POSITION) &
ACPI_X_SLEEP_TYPE_MASK);
(void)acpi_write((sleep_type_value | ACPI_X_SLEEP_ENABLE),
&acpi_gbl_FADT.sleep_control);
}
acpi_hw_execute_sleep_method(METHOD_NAME__BFS, sleep_state);
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_hw_extended_wake
*
* PARAMETERS: sleep_state - Which sleep state we just exited
*
* RETURN: Status
*
* DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep
* Called with interrupts ENABLED.
*
******************************************************************************/
acpi_status acpi_hw_extended_wake(u8 sleep_state)
{
ACPI_FUNCTION_TRACE(hw_extended_wake);
/* Ensure enter_sleep_state_prep -> enter_sleep_state ordering */
acpi_gbl_sleep_type_a = ACPI_SLEEP_TYPE_INVALID;
/* Execute the wake methods */
acpi_hw_execute_sleep_method(METHOD_NAME__SST, ACPI_SST_WAKING);
acpi_hw_execute_sleep_method(METHOD_NAME__WAK, sleep_state);
/*
* Some BIOS code assumes that WAK_STS will be cleared on resume
* and use it to determine whether the system is rebooting or
* resuming. Clear WAK_STS for compatibility.
*/
(void)acpi_write(ACPI_X_WAKE_STATUS, &acpi_gbl_FADT.sleep_status);
acpi_gbl_system_awake_and_running = TRUE;
acpi_hw_execute_sleep_method(METHOD_NAME__SST, ACPI_SST_WORKING);
return_ACPI_STATUS(AE_OK);
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册