Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: export clk_* symbols in clk.c
  m68knommu: Split the .init section into INIT_TEXT_SECTION and INIT_DATA_SECTION.
  m68knommu: Move __init_end out of the .init section.
  m68knommu: Move __init_begin out of the .init section.
  m68knommu: Use more macros inside the .init section.
  m68knommu: Use INIT_TASK_DATA and CACHELINE_ALIGNED_DATA.
  m68knommu: Make THREAD_SIZE available to assembly files.
  m68knommu: Don't hardcode the value of PAGE_SIZE in the linker script.
  m68knommu: rename BSS define in linker script
  m68knommu: add a task_pt_regs() macro
  m68knommu: define arch_has_single_step() and friends
  m68knommu: add uboot commandline argument passing support
  m68knommu: Coldfire GPIO corrections
  m68knommu: move mcf_remove to .devexit.text

Fixed up (?) conflict in arch/m68k/include/asm/ptrace.h

arch/m68k/include/asm/processor.h

@@ -165,6 +165,8 @@ unsigned long get_wchan(struct task_struct *p);
 	eip; })
 #define	KSTK_ESP(tsk)	((tsk) == current ? rdusp() : (tsk)->thread.usp)
 
+#define task_pt_regs(tsk)	((struct pt_regs *) ((tsk)->thread.esp0))
+
 #define cpu_relax()	barrier()
 
 #endif

arch/m68k/include/asm/ptrace.h

@@ -86,7 +86,7 @@ struct switch_stack {
 extern void show_regs(struct pt_regs *);
 
 /*
- * These are defined as per linux/ptrace.h, which see.
+ * These are defined as per linux/ptrace.h.
  */
 struct task_struct;
 

arch/m68k/include/asm/thread_info_no.h

@@ -12,8 +12,6 @@
 
 #ifdef __KERNEL__
 
-#ifndef __ASSEMBLY__
-
 /*
  * Size of kernel stack for each process. This must be a power of 2...
  */
@@ -28,6 +26,8 @@
  */
 #define THREAD_SIZE (PAGE_SIZE<<THREAD_SIZE_ORDER)
 
+#ifndef __ASSEMBLY__
+
 /*
  * low level task data.
  */

arch/m68knommu/Kconfig

@@ -533,6 +533,13 @@ config AVNET
 	default y
 	depends on (AVNET5282)
 
+config UBOOT
+	bool "Support for U-Boot command line parameters"
+	help
+	  If you say Y here kernel will try to collect command
+	  line parameters from the initial u-boot stack.
+	default n
+
 config 4KSTACKS
 	bool "Use 4Kb for kernel stacks instead of 8Kb"
 	default y

arch/m68knommu/kernel/setup.c

@@ -29,6 +29,8 @@
 #include <linux/bootmem.h>
 #include <linux/seq_file.h>
 #include <linux/init.h>
+#include <linux/initrd.h>
+#include <linux/root_dev.h>
 
 #include <asm/setup.h>
 #include <asm/irq.h>
@@ -52,7 +54,6 @@ void (*mach_reset)(void);
 void (*mach_halt)(void);
 void (*mach_power_off)(void);
 
-
 #ifdef CONFIG_M68000
 	#define CPU "MC68000"
 #endif
@@ -111,6 +112,69 @@ void (*mach_power_off)(void);
 extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end;
 extern int _ramstart, _ramend;
 
+#if defined(CONFIG_UBOOT)
+/*
+ * parse_uboot_commandline
+ *
+ * Copies u-boot commandline arguments and store them in the proper linux
+ * variables.
+ *
+ * Assumes:
+ *	_init_sp global contains the address in the stack pointer when the
+ *	kernel starts (see head.S::_start)
+ *
+ *	U-Boot calling convention:
+ *	(*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end);
+ *
+ *	_init_sp can be parsed as such
+ *
+ *	_init_sp+00 = u-boot cmd after jsr into kernel (skip)
+ *	_init_sp+04 = &kernel board_info (residual data)
+ *	_init_sp+08 = &initrd_start
+ *	_init_sp+12 = &initrd_end
+ *	_init_sp+16 = &cmd_start
+ *	_init_sp+20 = &cmd_end
+ *
+ *	This also assumes that the memory locations pointed to are still
+ *	unmodified. U-boot places them near the end of external SDRAM.
+ *
+ * Argument(s):
+ *	commandp = the linux commandline arg container to fill.
+ *	size     = the sizeof commandp.
+ *
+ * Returns:
+ */
+void parse_uboot_commandline(char *commandp, int size)
+{
+	extern unsigned long _init_sp;
+	unsigned long *sp;
+	unsigned long uboot_kbd;
+	unsigned long uboot_initrd_start, uboot_initrd_end;
+	unsigned long uboot_cmd_start, uboot_cmd_end;
+
+
+	sp = (unsigned long *)_init_sp;
+	uboot_kbd = sp[1];
+	uboot_initrd_start = sp[2];
+	uboot_initrd_end = sp[3];
+	uboot_cmd_start = sp[4];
+	uboot_cmd_end = sp[5];
+
+	if (uboot_cmd_start && uboot_cmd_end)
+		strncpy(commandp, (const char *)uboot_cmd_start, size);
+#if defined(CONFIG_BLK_DEV_INITRD)
+	if (uboot_initrd_start && uboot_initrd_end &&
+		(uboot_initrd_end > uboot_initrd_start)) {
+		initrd_start = uboot_initrd_start;
+		initrd_end = uboot_initrd_end;
+		ROOT_DEV = Root_RAM0;
+		printk(KERN_INFO "initrd at 0x%lx:0x%lx\n",
+			initrd_start, initrd_end);
+	}
+#endif /* if defined(CONFIG_BLK_DEV_INITRD) */
+}
+#endif /* #if defined(CONFIG_UBOOT) */
+
 void __init setup_arch(char **cmdline_p)
 {
 	int bootmap_size;
@@ -128,7 +192,24 @@ void __init setup_arch(char **cmdline_p)
 #if defined(CONFIG_BOOTPARAM)
 	strncpy(&command_line[0], CONFIG_BOOTPARAM_STRING, sizeof(command_line));
 	command_line[sizeof(command_line) - 1] = 0;
-#endif
+#endif /* CONFIG_BOOTPARAM */
+
+#if defined(CONFIG_UBOOT)
+	/* CONFIG_UBOOT and CONFIG_BOOTPARAM defined, concatenate cmdline */
+	#if defined(CONFIG_BOOTPARAM)
+		/* Add the whitespace separator */
+		command_line[strlen(CONFIG_BOOTPARAM_STRING)] = ' ';
+		/* Parse uboot command line into the rest of the buffer */
+		parse_uboot_commandline(
+			&command_line[(strlen(CONFIG_BOOTPARAM_STRING)+1)],
+			(sizeof(command_line) -
+			(strlen(CONFIG_BOOTPARAM_STRING)+1)));
+	/* Only CONFIG_UBOOT defined, create cmdline */
+	#else
+		parse_uboot_commandline(&command_line[0], sizeof(command_line));
+	#endif /* CONFIG_BOOTPARAM */
+	command_line[sizeof(command_line) - 1] = 0;
+#endif /* CONFIG_UBOOT */
 
 	printk(KERN_INFO "\x0F\r\n\nuClinux/" CPU "\n");
 
@@ -204,6 +285,13 @@ void __init setup_arch(char **cmdline_p)
 	free_bootmem(memory_start, memory_end - memory_start);
 	reserve_bootmem(memory_start, bootmap_size, BOOTMEM_DEFAULT);
 
+#if defined(CONFIG_UBOOT) && defined(CONFIG_BLK_DEV_INITRD)
+	if ((initrd_start > 0) && (initrd_start < initrd_end) &&
+			(initrd_end < memory_end))
+		reserve_bootmem(initrd_start, initrd_end - initrd_start,
+				 BOOTMEM_DEFAULT);
+#endif /* if defined(CONFIG_BLK_DEV_INITRD) */
+
 	/*
 	 * Get kmalloc into gear.
 	 */

arch/m68knommu/kernel/vmlinux.lds.S

@@ -8,6 +8,8 @@
  */
 
 #include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
+#include <asm/thread_info.h>
 
 #if defined(CONFIG_RAMKERNEL)
 #define	RAM_START	CONFIG_KERNELBASE
@@ -15,7 +17,7 @@
 #define	TEXT		ram
 #define	DATA		ram
 #define	INIT		ram
-#define	BSS		ram
+#define	BSSS		ram
 #endif
 #if defined(CONFIG_ROMKERNEL) || defined(CONFIG_HIMEMKERNEL)
 #define	RAM_START	CONFIG_RAMBASE
@@ -27,7 +29,7 @@
 #define	TEXT		rom
 #define	DATA		ram
 #define	INIT		ram
-#define	BSS		ram
+#define	BSSS		ram
 #endif
 
 #ifndef DATA_ADDR
@@ -147,40 +149,19 @@ SECTIONS {
 		. = ALIGN(4);
 		_sdata = . ;
 		DATA_DATA
-		. = ALIGN(32);
-		*(.data.cacheline_aligned)
-		. = ALIGN(8192) ;
-		*(.data.init_task)
+		CACHELINE_ALIGNED_DATA(32)
+		INIT_TASK_DATA(THREAD_SIZE)
 		_edata = . ;
 	} > DATA
 
-	.init : {
-		. = ALIGN(4096);
+	.init.text : {
+		. = ALIGN(PAGE_SIZE);
 		__init_begin = .;
-		_sinittext = .;
-		INIT_TEXT
-		_einittext = .;
-		INIT_DATA
-		. = ALIGN(16);
-		__setup_start = .;
-		*(.init.setup)
-		__setup_end = .;
-		__initcall_start = .;
-		INITCALLS
-		__initcall_end = .;
-		__con_initcall_start = .;
-		*(.con_initcall.init)
-		__con_initcall_end = .;
-		__security_initcall_start = .;
-		*(.security_initcall.init)
-		__security_initcall_end = .;
-#ifdef CONFIG_BLK_DEV_INITRD
-		. = ALIGN(4);
-		__initramfs_start = .;
-		*(.init.ramfs)
-		__initramfs_end = .;
-#endif
-		. = ALIGN(4096);
+	} > INIT
+	INIT_TEXT_SECTION(PAGE_SIZE) > INIT
+	INIT_DATA_SECTION(16) > INIT
+	.init.data : {
+		. = ALIGN(PAGE_SIZE);
 		__init_end = .;
 	} > INIT
 
@@ -192,7 +173,7 @@ SECTIONS {
 		. = ALIGN(4) ;
 		_ebss = . ;
 	 	_end = . ;
-	} > BSS
+	} > BSSS
 
 	DISCARDS
 }

arch/m68knommu/platform/523x/gpio.c

@@ -30,7 +30,8 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = {
 			.direction_output	= mcf_gpio_direction_output,
 			.get			= mcf_gpio_get_value,
 			.set			= mcf_gpio_set_value,
-			.ngpio			= 8,
+			.base			= 1,
+			.ngpio			= 7,
 		},
 		.pddr				= MCFEPORT_EPDDR,
 		.podr				= MCFEPORT_EPDR,
@@ -244,7 +245,7 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = {
 			.get			= mcf_gpio_get_value,
 			.set			= mcf_gpio_set_value_fast,
 			.base			= 96,
-			.ngpio			= 4,
+			.ngpio			= 8,
 		},
 		.pddr				= MCFGPIO_PDDR_TIMER,
 		.podr				= MCFGPIO_PODR_TIMER,

arch/m68knommu/platform/527x/gpio.c

@@ -31,7 +31,8 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = {
 			.direction_output	= mcf_gpio_direction_output,
 			.get			= mcf_gpio_get_value,
 			.set			= mcf_gpio_set_value,
-			.ngpio			= 8,
+			.base			= 1,
+			.ngpio			= 7,
 		},
 		.pddr				= MCFEPORT_EPDDR,
 		.podr				= MCFEPORT_EPDR,
@@ -263,7 +264,8 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = {
 			.direction_output	= mcf_gpio_direction_output,
 			.get			= mcf_gpio_get_value,
 			.set			= mcf_gpio_set_value,
-			.ngpio			= 8,
+			.base			= 1,
+			.ngpio			= 7,
 		},
 		.pddr				= MCFEPORT_EPDDR,
 		.podr				= MCFEPORT_EPDR,

arch/m68knommu/platform/528x/gpio.c

@@ -31,7 +31,7 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = {
 			.get			= mcf_gpio_get_value,
 			.set			= mcf_gpio_set_value,
 			.base			= 1,
-			.ngpio			= 8,
+			.ngpio			= 7,
 		},
 		.pddr				= MCFEPORT_EPDDR,
 		.podr				= MCFEPORT_EPDR,

arch/m68knommu/platform/coldfire/clk.c

@@ -9,6 +9,7 @@
 /***************************************************************************/
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/clk.h>
 #include <asm/coldfire.h>
 
@@ -18,23 +19,27 @@ struct clk *clk_get(struct device *dev, const char *id)
 {
 	return NULL;
 }
+EXPORT_SYMBOL(clk_get);
 
 int clk_enable(struct clk *clk)
 {
 	return 0;
 }
+EXPORT_SYMBOL(clk_enable);
 
 void clk_disable(struct clk *clk)
 {
 }
+EXPORT_SYMBOL(clk_disable);
 
 void clk_put(struct clk *clk)
 {
 }
+EXPORT_SYMBOL(clk_put);
 
 unsigned long clk_get_rate(struct clk *clk)
 {
 	return MCF_CLK;
 }
-
+EXPORT_SYMBOL(clk_get_rate);
 /***************************************************************************/

arch/m68knommu/platform/coldfire/head.S

@@ -106,6 +106,9 @@
 .global _ramvec
 .global	_ramstart
 .global	_ramend
+#if defined(CONFIG_UBOOT)
+.global	_init_sp
+#endif
 
 /*****************************************************************************/
 
@@ -124,6 +127,10 @@ _ramstart:
 .long	0
 _ramend:
 .long	0
+#if defined(CONFIG_UBOOT)
+_init_sp:
+.long	0
+#endif
 
 /*****************************************************************************/
 
@@ -137,6 +144,9 @@ __HEAD
 _start:
 	nop					/* filler */
 	movew	#0x2700, %sr			/* no interrupts */
+#if defined(CONFIG_UBOOT)
+	movel	%sp,_init_sp			/* save initial stack pointer */
+#endif
 
 	/*
 	 *	Do any platform or board specific setup now. Most boards

drivers/serial/mcf.c

@@ -602,7 +602,7 @@ static int __devinit mcf_probe(struct platform_device *pdev)
 
 /****************************************************************************/
 
-static int mcf_remove(struct platform_device *pdev)
+static int __devexit mcf_remove(struct platform_device *pdev)
 {
 	struct uart_port *port;
 	int i;