提交 6fefb0d1 编写于 作者: A Andi Kleen 提交者: Linus Torvalds

[PATCH] x86_64: Regularize exception stack handling

This fixes various issues in the return path for "paranoid"
handlers (= running on a private exception stack that act like NMIs).

Generalize previous hack to switch back to process stack for
scheduling/signal handling purposes.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
上级 11b854b2
......@@ -579,6 +579,7 @@ ENTRY(spurious_interrupt)
movq ORIG_RAX(%rsp),%rsi
movq $-1,ORIG_RAX(%rsp)
call \sym
cli
.endm
/*
......@@ -794,10 +795,6 @@ ENTRY(debug)
pushq $0
CFI_ADJUST_CFA_OFFSET 8
paranoidentry do_debug
/* switch back to process stack to restore the state ptrace touched */
movq %rax,%rsp
testl $3,CS(%rsp)
jnz paranoid_userspace
jmp paranoid_exit
CFI_ENDPROC
......@@ -807,35 +804,49 @@ ENTRY(nmi)
pushq $-1
CFI_ADJUST_CFA_OFFSET 8
paranoidentry do_nmi
/*
* "Paranoid" exit path from exception stack.
* Paranoid because this is used by NMIs and cannot take
* any kernel state for granted.
* We don't do kernel preemption checks here, because only
* NMI should be common and it does not enable IRQs and
* cannot get reschedule ticks.
*/
/* ebx: no swapgs flag */
paranoid_exit:
testl %ebx,%ebx /* swapgs needed? */
jnz paranoid_restore
testl $3,CS(%rsp)
jnz paranoid_userspace
paranoid_swapgs:
cli
swapgs
paranoid_restore:
RESTORE_ALL 8
iretq
paranoid_userspace:
cli
GET_THREAD_INFO(%rcx)
movl threadinfo_flags(%rcx),%edx
testl $_TIF_WORK_MASK,%edx
movl threadinfo_flags(%rcx),%ebx
andl $_TIF_WORK_MASK,%ebx
jz paranoid_swapgs
testl $_TIF_NEED_RESCHED,%edx
jnz paranoid_resched
movq %rsp,%rdi /* &pt_regs */
call sync_regs
movq %rax,%rsp /* switch stack for scheduling */
testl $_TIF_NEED_RESCHED,%ebx
jnz paranoid_schedule
movl %ebx,%edx /* arg3: thread flags */
sti
xorl %esi,%esi /* oldset */
movq %rsp,%rdi /* &pt_regs */
xorl %esi,%esi /* arg2: oldset */
movq %rsp,%rdi /* arg1: &pt_regs */
call do_notify_resume
jmp paranoid_exit
paranoid_resched:
cli
jmp paranoid_userspace
paranoid_schedule:
sti
call schedule
jmp paranoid_exit
cli
jmp paranoid_userspace
CFI_ENDPROC
ENTRY(int3)
zeroentry do_int3
......@@ -858,9 +869,6 @@ ENTRY(reserved)
ENTRY(double_fault)
CFI_STARTPROC
paranoidentry do_double_fault
movq %rax,%rsp
testl $3,CS(%rsp)
jnz paranoid_userspace
jmp paranoid_exit
CFI_ENDPROC
......@@ -874,9 +882,6 @@ ENTRY(segment_not_present)
ENTRY(stack_segment)
CFI_STARTPROC
paranoidentry do_stack_segment
movq %rax,%rsp
testl $3,CS(%rsp)
jnz paranoid_userspace
jmp paranoid_exit
CFI_ENDPROC
......
......@@ -488,24 +488,8 @@ DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS)
DO_ERROR(11, SIGBUS, "segment not present", segment_not_present)
DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0)
DO_ERROR(18, SIGSEGV, "reserved", reserved)
#define DO_ERROR_STACK(trapnr, signr, str, name) \
asmlinkage void *do_##name(struct pt_regs * regs, long error_code) \
{ \
struct pt_regs *pr = ((struct pt_regs *)(current->thread.rsp0))-1; \
if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
== NOTIFY_STOP) \
return regs; \
if (regs->cs & 3) { \
memcpy(pr, regs, sizeof(struct pt_regs)); \
regs = pr; \
} \
do_trap(trapnr, signr, str, regs, error_code, NULL); \
return regs; \
}
DO_ERROR_STACK(12, SIGBUS, "stack segment", stack_segment)
DO_ERROR_STACK( 8, SIGSEGV, "double fault", double_fault)
DO_ERROR(12, SIGBUS, "stack segment", stack_segment)
DO_ERROR( 8, SIGSEGV, "double fault", double_fault)
asmlinkage void do_general_protection(struct pt_regs * regs, long error_code)
{
......@@ -584,6 +568,8 @@ static void unknown_nmi_error(unsigned char reason, struct pt_regs * regs)
printk("Do you have a strange power saving mode enabled?\n");
}
/* Runs on IST stack. This code must keep interrupts off all the time.
Nested NMIs are prevented by the CPU. */
asmlinkage void default_do_nmi(struct pt_regs *regs)
{
unsigned char reason = 0;
......@@ -629,20 +615,34 @@ asmlinkage void do_int3(struct pt_regs * regs, long error_code)
return;
}
/* Help handler running on IST stack to switch back to user stack
for scheduling or signal handling. The actual stack switch is done in
entry.S */
asmlinkage struct pt_regs *sync_regs(struct pt_regs *eregs)
{
struct pt_regs *regs = eregs;
/* Did already sync */
if (eregs == (struct pt_regs *)eregs->rsp)
;
/* Exception from user space */
else if (eregs->cs & 3)
regs = ((struct pt_regs *)current->thread.rsp0) - 1;
/* Exception from kernel and interrupts are enabled. Move to
kernel process stack. */
else if (eregs->eflags & X86_EFLAGS_IF)
regs = (struct pt_regs *)(eregs->rsp -= sizeof(struct pt_regs));
if (eregs != regs)
*regs = *eregs;
return regs;
}
/* runs on IST stack. */
asmlinkage void *do_debug(struct pt_regs * regs, unsigned long error_code)
asmlinkage void do_debug(struct pt_regs * regs, unsigned long error_code)
{
struct pt_regs *pr;
unsigned long condition;
struct task_struct *tsk = current;
siginfo_t info;
pr = (struct pt_regs *)(current->thread.rsp0)-1;
if (regs->cs & 3) {
memcpy(pr, regs, sizeof(struct pt_regs));
regs = pr;
}
#ifdef CONFIG_CHECKING
{
/* RED-PEN interaction with debugger - could destroy gs */
......@@ -660,7 +660,7 @@ asmlinkage void *do_debug(struct pt_regs * regs, unsigned long error_code)
if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code,
SIGTRAP) == NOTIFY_STOP) {
return regs;
return;
}
conditional_sti(regs);
......@@ -712,7 +712,7 @@ asmlinkage void *do_debug(struct pt_regs * regs, unsigned long error_code)
clear_dr7:
asm volatile("movq %0,%%db7"::"r"(0UL));
notify_die(DIE_DEBUG, "debug", regs, condition, 1, SIGTRAP);
return regs;
return;
clear_TF_reenable:
set_tsk_thread_flag(tsk, TIF_SINGLESTEP);
......@@ -722,7 +722,6 @@ asmlinkage void *do_debug(struct pt_regs * regs, unsigned long error_code)
if (notify_die(DIE_DEBUG, "debug2", regs, condition, 1, SIGTRAP)
!= NOTIFY_STOP)
regs->eflags &= ~TF_MASK;
return regs;
}
static int kernel_math_error(struct pt_regs *regs, char *str)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册