MIPS: Loongson64: Move files to the top-level directory

Current Loongson-3 code can share among all Loongson64 processors.
Signed-off-by: NJiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: NPaul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: chenhc@lemote.com
Cc: paul.burton@mips.com

arch/mips/Kconfig

@@ -461,7 +461,33 @@ config MACH_LOONGSON2EF
 
 config MACH_LOONGSON64
 	bool "Loongson-2/3 GSx64 family of machines"
+	select ARCH_SPARSEMEM_ENABLE
+	select ARCH_MIGHT_HAVE_PC_PARPORT
+	select ARCH_MIGHT_HAVE_PC_SERIO
+	select GENERIC_ISA_DMA_SUPPORT_BROKEN
+	select BOOT_ELF32
+	select BOARD_SCACHE
+	select CSRC_R4K
+	select CEVT_R4K
+	select CPU_HAS_WB
+	select FORCE_PCI
+	select ISA
+	select I8259
+	select IRQ_MIPS_CPU
+	select NR_CPUS_DEFAULT_4
+	select USE_GENERIC_EARLY_PRINTK_8250
+	select SYS_HAS_CPU_LOONGSON64
+	select SYS_HAS_EARLY_PRINTK
+	select SYS_SUPPORTS_SMP
+	select SYS_SUPPORTS_HOTPLUG_CPU
+	select SYS_SUPPORTS_NUMA
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_HIGHMEM
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_ZBOOT
+	select LOONGSON_MC146818
+	select ZONE_DMA32
+	select NUMA
 	help
 	  This enables the support of Loongson-2/3 family of processors with
 	  GSx64 microarchitecture.

arch/mips/configs/loongson3_defconfig

@@ -24,7 +24,6 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_EMBEDDED=y
 CONFIG_MACH_LOONGSON64=y
-CONFIG_LOONGSON_MACH3X=y
 CONFIG_SMP=y
 CONFIG_HZ_256=y
 CONFIG_KEXEC=y

arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h

@@ -43,7 +43,6 @@
 #define cpu_has_vint		0
 #define cpu_has_vtag_icache	0
 #define cpu_has_watch		1
-
 #define cpu_has_wsbh		1
 #define cpu_has_ic_fills_f_dc	1
 #define cpu_hwrena_impl_bits	0xc0000000

arch/mips/loongson64/Kconfig

 # SPDX-License-Identifier: GPL-2.0
 if MACH_LOONGSON64
 
-choice
-	prompt "Machine Type"
-
-config LOONGSON_MACH3X
-	bool "Generic Loongson 3 family machines"
-	select ARCH_SPARSEMEM_ENABLE
-	select ARCH_MIGHT_HAVE_PC_PARPORT
-	select ARCH_MIGHT_HAVE_PC_SERIO
-	select GENERIC_ISA_DMA_SUPPORT_BROKEN
-	select BOOT_ELF32
-	select BOARD_SCACHE
-	select CSRC_R4K
-	select CEVT_R4K
-	select CPU_HAS_WB
-	select FORCE_PCI
-	select ISA
-	select I8259
-	select IRQ_MIPS_CPU
-	select NR_CPUS_DEFAULT_4
-	select USE_GENERIC_EARLY_PRINTK_8250
-	select SYS_HAS_CPU_LOONGSON64
-	select SYS_HAS_EARLY_PRINTK
-	select SYS_SUPPORTS_SMP
-	select SYS_SUPPORTS_HOTPLUG_CPU
-	select SYS_SUPPORTS_NUMA
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_HIGHMEM
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select LOONGSON_MC146818
-	select ZONE_DMA32
-	select NUMA
-	help
-		Generic Loongson 3 family machines utilize the 3A/3B revision
-		of Loongson processor and RS780/SBX00 chipset.
-endchoice
-
 config RS780_HPET
 	bool "RS780/SBX00 HPET Timer"
-	depends on LOONGSON_MACH3X
+	depends on CONFIG_MACH_LOONGSON64
 	select MIPS_EXTERNAL_TIMER
 	help
 	  This option enables the hpet timer of AMD RS780/SBX00.

arch/mips/loongson64/Makefile

 # SPDX-License-Identifier: GPL-2.0-only
 #
-# Common code for all Loongson based systems
+# Makefile for Loongson-3 family machines
 #
+obj-$(CONFIG_MACH_LOONGSON64) += irq.o cop2-ex.o platform.o acpi_init.o dma.o \
+				setup.o init.o cmdline.o env.o time.o reset.o \
 
-obj-$(CONFIG_MACH_LOONGSON64) += common/
-
-#
-# All Loongson-3 family machines
-#
-
-obj-$(CONFIG_CPU_LOONGSON64)  += loongson-3/
+obj-$(CONFIG_SMP)	+= smp.o
+obj-$(CONFIG_NUMA)	+= numa.o
+obj-$(CONFIG_RS780_HPET) += hpet.o
+obj-$(CONFIG_PCI) += pci.o
+obj-$(CONFIG_LOONGSON_MC146818) += rtc.o
+obj-$(CONFIG_SUSPEND) += pm.o

arch/mips/loongson64/common/Makefile

-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for loongson based machines.
-#
-
-obj-y += setup.o init.o cmdline.o env.o time.o reset.o
-
-obj-$(CONFIG_PCI) += pci.o
-
-obj-$(CONFIG_LOONGSON_MC146818) += rtc.o
-
-#
-# Suspend Support
-#
-
-obj-$(CONFIG_SUSPEND) += pm.o

arch/mips/loongson64/loongson-3/Makefile

-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for Loongson-3 family machines
-#
-obj-y			+= irq.o cop2-ex.o platform.o acpi_init.o dma.o
-
-obj-$(CONFIG_SMP)	+= smp.o
-
-obj-$(CONFIG_NUMA)	+= numa.o
-
-obj-$(CONFIG_RS780_HPET) += hpet.o

arch/mips/pci/Makefile

@@ -35,7 +35,7 @@ obj-$(CONFIG_LASAT)		+= pci-lasat.o
 obj-$(CONFIG_MIPS_COBALT)	+= fixup-cobalt.o
 obj-$(CONFIG_LEMOTE_FULOONG2E)	+= fixup-fuloong2e.o ops-loongson2.o
 obj-$(CONFIG_LEMOTE_MACH2F)	+= fixup-lemote2f.o ops-loongson2.o
-obj-$(CONFIG_LOONGSON_MACH3X)	+= fixup-loongson3.o ops-loongson3.o
+obj-$(CONFIG_MACH_LOONGSON64)	+= fixup-loongson3.o ops-loongson3.o
 obj-$(CONFIG_MIPS_MALTA)	+= fixup-malta.o pci-malta.o
 obj-$(CONFIG_PMC_MSP7120_GW)	+= fixup-pmcmsp.o ops-pmcmsp.o
 obj-$(CONFIG_PMC_MSP7120_EVAL)	+= fixup-pmcmsp.o ops-pmcmsp.o

drivers/platform/mips/Kconfig

@@ -17,8 +17,8 @@ menuconfig MIPS_PLATFORM_DEVICES
 if MIPS_PLATFORM_DEVICES
 
 config CPU_HWMON
-	tristate "Loongson CPU HWMon Driver"
-	depends on LOONGSON_MACH3X
+	tristate "Loongson-3 CPU HWMon Driver"
+	depends on CONFIG_MACH_LOONGSON64
 	select HWMON
 	default y
 	help