提交 6f094797 编写于 作者: J Jesper Dangaard Brouer 提交者: David S. Miller

pktgen: add sample script pktgen_sample01_simple.sh

Add the first basic pktgen samples script pktgen_sample01_simple.sh,
which demonstrates the a simple use of the helper functions.
Removing pktgen.conf-1-1 as that example should be covered now.

The naming scheme pktgen_sampleNN, where NN is a number, should encourage
reading the samples in a specific order.

Script cause pktgen sending with a single thread and single interface,
and introduce flow variation via random UDP source port.

Usage example and help:
 ./pktgen_sample01_simple.sh -i eth4 -m 00:1B:21:3C:9D:F8 -d 192.168.8.2

Usage: ./pktgen_sample01_simple.sh [-vx] -i ethX
  -i : ($DEV)       output interface/device (required)
  -s : ($PKT_SIZE)  packet size
  -d : ($DEST_IP)   destination IP
  -m : ($DST_MAC)   destination MAC-addr
  -c : ($SKB_CLONE) SKB clones send before alloc new SKB
  -v : ($VERBOSE)   verbose
  -x : ($DEBUG)     debug
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 b64b0d1e
......@@ -219,10 +219,30 @@ Examples:
Sample scripts
==============
A collection of small tutorial scripts for pktgen is in the
samples/pktgen directory:
A collection of tutorial scripts and helpers for pktgen is in the
samples/pktgen directory. The helper parameters.sh file support easy
and consistant parameter parsing across the sample scripts.
Usage example and help:
./pktgen_sample01_simple.sh -i eth4 -m 00:1B:21:3C:9D:F8 -d 192.168.8.2
Usage: ./pktgen_sample01_simple.sh [-vx] -i ethX
-i : ($DEV) output interface/device (required)
-s : ($PKT_SIZE) packet size
-d : ($DEST_IP) destination IP
-m : ($DST_MAC) destination MAC-addr
-t : ($THREADS) threads to start
-c : ($SKB_CLONE) SKB clones send before alloc new SKB
-b : ($BURST) HW level bursting of SKBs
-v : ($VERBOSE) verbose
-x : ($DEBUG) debug
The global variables being set are also listed. E.g. the required
interface/device parameter "-i" sets variable $DEV. Copy the
pktgen_sampleXX scripts and modify them to fit your own needs.
The old scripts:
pktgen.conf-1-1 # 1 CPU 1 dev
pktgen.conf-1-2 # 1 CPU 2 dev
pktgen.conf-2-1 # 2 CPU's 1 dev
pktgen.conf-2-2 # 2 CPU's 2 dev
......@@ -231,9 +251,6 @@ pktgen.conf-1-1-ip6 # 1 CPU 1 dev ipv6
pktgen.conf-1-1-ip6-rdos # 1 CPU 1 dev ipv6 w. route DoS
pktgen.conf-1-1-flows # 1 CPU 1 dev multiple flows.
Run in shell: ./pktgen.conf-X-Y
This does all the setup including sending.
Interrupt affinity
===================
......
#!/bin/bash
#modprobe pktgen
function pgset() {
local result
echo $1 > $PGDEV
result=`cat $PGDEV | fgrep "Result: OK:"`
if [ "$result" = "" ]; then
cat $PGDEV | fgrep Result:
fi
}
# Config Start Here -----------------------------------------------------------
# thread config
# Each CPU has its own thread. One CPU example. We add eth1.
PGDEV=/proc/net/pktgen/kpktgend_0
echo "Removing all devices"
pgset "rem_device_all"
echo "Adding eth1"
pgset "add_device eth1"
# device config
# delay 0 means maximum speed.
CLONE_SKB="clone_skb 1000000"
# NIC adds 4 bytes CRC
PKT_SIZE="pkt_size 60"
# COUNT 0 means forever
#COUNT="count 0"
COUNT="count 10000000"
DELAY="delay 0"
PGDEV=/proc/net/pktgen/eth1
echo "Configuring $PGDEV"
pgset "$COUNT"
pgset "$CLONE_SKB"
pgset "$PKT_SIZE"
pgset "$DELAY"
pgset "dst 10.10.11.2"
pgset "dst_mac 00:04:23:08:91:dc"
# Time to run
PGDEV=/proc/net/pktgen/pgctrl
echo "Running... ctrl^C to stop"
trap true INT
pgset "start"
echo "Done"
cat /proc/net/pktgen/eth1
#!/bin/bash
#
# Simple example:
# * pktgen sending with single thread and single interface
# * flow variation via random UDP source port
#
basedir=`dirname $0`
source ${basedir}/functions.sh
root_check_run_with_sudo "$@"
# Parameter parsing via include
# - go look in parameters.sh to see which setting are avail
# - required param is the interface "-i" stored in $DEV
source ${basedir}/parameters.sh
#
# Set some default params, if they didn't get set
[ -z "$DEST_IP" ] && DEST_IP="198.18.0.42"
[ -z "$CLONE_SKB" ] && CLONE_SKB="0"
# Example enforce param "-m" for dst_mac
[ -z "$DST_MAC" ] && usage && err 2 "Must specify -m dst_mac"
# Base Config
DELAY="0" # Zero means max speed
COUNT="100000" # Zero means indefinitely
# Flow variation random source port between min and max
UDP_MIN=9
UDP_MAX=109
# General cleanup everything since last run
# (especially important if other threads were configured by other scripts)
pg_ctrl "reset"
# Add remove all other devices and add_device $DEV to thread 0
thread=0
pg_thread $thread "rem_device_all"
pg_thread $thread "add_device" $DEV
# How many packets to send (zero means indefinitely)
pg_set $DEV "count $COUNT"
# Reduce alloc cost by sending same SKB many times
# - this obviously affects the randomness within the packet
pg_set $DEV "clone_skb $CLONE_SKB"
# Set packet size
pg_set $DEV "pkt_size $PKT_SIZE"
# Delay between packets (zero means max speed)
pg_set $DEV "delay $DELAY"
# Flag example disabling timestamping
pg_set $DEV "flag NO_TIMESTAMP"
# Destination
pg_set $DEV "dst_mac $DST_MAC"
pg_set $DEV "dst $DEST_IP"
# Setup random UDP port src range
pg_set $DEV "flag UDPSRC_RND"
pg_set $DEV "udp_src_min $UDP_MIN"
pg_set $DEV "udp_src_max $UDP_MAX"
# start_run
echo "Running... ctrl^C to stop" >&2
pg_ctrl "start"
echo "Done" >&2
# Print results
echo "Result device: $DEV"
cat /proc/net/pktgen/$DEV
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册