提交 6ef5e212 编写于 作者: S Simon Horman

arm64: dts: renesas: r8a7796: sort subnodes of the root node

Sort subnodes of the root node alphanumerically.

This is part of an ongoing effort to provide consistent node
order in the DT of Renesas SoCs to improve maintainability.

This should not have any run-time effect.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
上级 d2b860cb
......@@ -60,6 +60,72 @@
clock-frequency = <0>;
};
cluster0_opp: opp_table0 {
compatible = "operating-points-v2";
opp-shared;
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <820000>;
clock-latency-ns = <300000>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <820000>;
clock-latency-ns = <300000>;
};
opp-1500000000 {
opp-hz = /bits/ 64 <1500000000>;
opp-microvolt = <820000>;
clock-latency-ns = <300000>;
};
opp-1600000000 {
opp-hz = /bits/ 64 <1600000000>;
opp-microvolt = <900000>;
clock-latency-ns = <300000>;
turbo-mode;
};
opp-1700000000 {
opp-hz = /bits/ 64 <1700000000>;
opp-microvolt = <900000>;
clock-latency-ns = <300000>;
turbo-mode;
};
opp-1800000000 {
opp-hz = /bits/ 64 <1800000000>;
opp-microvolt = <960000>;
clock-latency-ns = <300000>;
turbo-mode;
};
};
cluster1_opp: opp_table1 {
compatible = "operating-points-v2";
opp-shared;
opp-800000000 {
opp-hz = /bits/ 64 <800000000>;
opp-microvolt = <820000>;
clock-latency-ns = <300000>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <820000>;
clock-latency-ns = <300000>;
};
opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <820000>;
clock-latency-ns = <300000>;
};
opp-1300000000 {
opp-hz = /bits/ 64 <1300000000>;
opp-microvolt = <820000>;
clock-latency-ns = <300000>;
turbo-mode;
};
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
......@@ -161,72 +227,6 @@
clock-frequency = <0>;
};
cluster0_opp: opp_table0 {
compatible = "operating-points-v2";
opp-shared;
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <820000>;
clock-latency-ns = <300000>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <820000>;
clock-latency-ns = <300000>;
};
opp-1500000000 {
opp-hz = /bits/ 64 <1500000000>;
opp-microvolt = <820000>;
clock-latency-ns = <300000>;
};
opp-1600000000 {
opp-hz = /bits/ 64 <1600000000>;
opp-microvolt = <900000>;
clock-latency-ns = <300000>;
turbo-mode;
};
opp-1700000000 {
opp-hz = /bits/ 64 <1700000000>;
opp-microvolt = <900000>;
clock-latency-ns = <300000>;
turbo-mode;
};
opp-1800000000 {
opp-hz = /bits/ 64 <1800000000>;
opp-microvolt = <960000>;
clock-latency-ns = <300000>;
turbo-mode;
};
};
cluster1_opp: opp_table1 {
compatible = "operating-points-v2";
opp-shared;
opp-800000000 {
opp-hz = /bits/ 64 <800000000>;
opp-microvolt = <820000>;
clock-latency-ns = <300000>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <820000>;
clock-latency-ns = <300000>;
};
opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <820000>;
clock-latency-ns = <300000>;
};
opp-1300000000 {
opp-hz = /bits/ 64 <1300000000>;
opp-microvolt = <820000>;
clock-latency-ns = <300000>;
turbo-mode;
};
};
/* External PCIe clock - can be overridden by the board */
pcie_bus_clk: pcie_bus {
compatible = "fixed-clock";
......@@ -234,13 +234,6 @@
clock-frequency = <0>;
};
pmu_a57 {
compatible = "arm,cortex-a57-pmu";
interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
<&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&a57_0>, <&a57_1>;
};
pmu_a53 {
compatible = "arm,cortex-a53-pmu";
interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
......@@ -250,6 +243,13 @@
interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>;
};
pmu_a57 {
compatible = "arm,cortex-a57-pmu";
interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
<&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&a57_0>, <&a57_1>;
};
psci {
compatible = "arm,psci-1.0", "arm,psci-0.2";
method = "smc";
......@@ -2063,14 +2063,6 @@
};
};
timer {
compatible = "arm,armv8-timer";
interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
<&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
<&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
<&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
};
thermal-zones {
sensor_thermal1: sensor-thermal1 {
polling-delay-passive = <250>;
......@@ -2151,6 +2143,14 @@
};
};
timer {
compatible = "arm,armv8-timer";
interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
<&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
<&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
<&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
};
/* External USB clocks - can be overridden by the board */
usb3s0_clk: usb3s0 {
compatible = "fixed-clock";
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册