提交 6ef398ea 编写于 作者: F Florian Fainelli 提交者: David S. Miller

net: bcmgenet: add EEE support

Allow enabling and disabling EEE using the designated ethtool getters
and setters. GENET allows controlling EEE at the UniMAC, RBUF and TBUF
levels. We also take care of restoring EEE after a suspend/resume cycle
if it was enabled prior to suspending.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 d0a6db8d
......@@ -714,6 +714,91 @@ static void bcmgenet_get_ethtool_stats(struct net_device *dev,
}
}
static void bcmgenet_eee_enable_set(struct net_device *dev, bool enable)
{
struct bcmgenet_priv *priv = netdev_priv(dev);
u32 off = priv->hw_params->tbuf_offset + TBUF_ENERGY_CTRL;
u32 reg;
if (enable && !priv->clk_eee_enabled) {
clk_prepare_enable(priv->clk_eee);
priv->clk_eee_enabled = true;
}
reg = bcmgenet_umac_readl(priv, UMAC_EEE_CTRL);
if (enable)
reg |= EEE_EN;
else
reg &= ~EEE_EN;
bcmgenet_umac_writel(priv, reg, UMAC_EEE_CTRL);
/* Enable EEE and switch to a 27Mhz clock automatically */
reg = __raw_readl(priv->base + off);
if (enable)
reg |= TBUF_EEE_EN | TBUF_PM_EN;
else
reg &= ~(TBUF_EEE_EN | TBUF_PM_EN);
__raw_writel(reg, priv->base + off);
/* Do the same for thing for RBUF */
reg = bcmgenet_rbuf_readl(priv, RBUF_ENERGY_CTRL);
if (enable)
reg |= RBUF_EEE_EN | RBUF_PM_EN;
else
reg &= ~(RBUF_EEE_EN | RBUF_PM_EN);
bcmgenet_rbuf_writel(priv, reg, RBUF_ENERGY_CTRL);
if (!enable && priv->clk_eee_enabled) {
clk_disable_unprepare(priv->clk_eee);
priv->clk_eee_enabled = false;
}
priv->eee.eee_enabled = enable;
priv->eee.eee_active = enable;
}
static int bcmgenet_get_eee(struct net_device *dev, struct ethtool_eee *e)
{
struct bcmgenet_priv *priv = netdev_priv(dev);
struct ethtool_eee *p = &priv->eee;
if (GENET_IS_V1(priv))
return -EOPNOTSUPP;
e->eee_enabled = p->eee_enabled;
e->eee_active = p->eee_active;
e->tx_lpi_timer = bcmgenet_umac_readl(priv, UMAC_EEE_LPI_TIMER);
return phy_ethtool_get_eee(priv->phydev, e);
}
static int bcmgenet_set_eee(struct net_device *dev, struct ethtool_eee *e)
{
struct bcmgenet_priv *priv = netdev_priv(dev);
struct ethtool_eee *p = &priv->eee;
int ret = 0;
if (GENET_IS_V1(priv))
return -EOPNOTSUPP;
p->eee_enabled = e->eee_enabled;
if (!p->eee_enabled) {
bcmgenet_eee_enable_set(dev, false);
} else {
ret = phy_init_eee(priv->phydev, 0);
if (ret) {
netif_err(priv, hw, dev, "EEE initialization failed\n");
return ret;
}
bcmgenet_umac_writel(priv, e->tx_lpi_timer, UMAC_EEE_LPI_TIMER);
bcmgenet_eee_enable_set(dev, true);
}
return phy_ethtool_set_eee(priv->phydev, e);
}
/* standard ethtool support functions. */
static struct ethtool_ops bcmgenet_ethtool_ops = {
.get_strings = bcmgenet_get_strings,
......@@ -727,6 +812,8 @@ static struct ethtool_ops bcmgenet_ethtool_ops = {
.set_msglevel = bcmgenet_set_msglevel,
.get_wol = bcmgenet_get_wol,
.set_wol = bcmgenet_set_wol,
.get_eee = bcmgenet_get_eee,
.set_eee = bcmgenet_set_eee,
};
/* Power down the unimac, based on mode. */
......@@ -2585,6 +2672,12 @@ static int bcmgenet_probe(struct platform_device *pdev)
if (IS_ERR(priv->clk_wol))
dev_warn(&priv->pdev->dev, "failed to get enet-wol clock\n");
priv->clk_eee = devm_clk_get(&priv->pdev->dev, "enet-eee");
if (IS_ERR(priv->clk_eee)) {
dev_warn(&priv->pdev->dev, "failed to get enet-eee clock\n");
priv->clk_eee = NULL;
}
err = reset_umac(priv);
if (err)
goto err_clk_disable;
......@@ -2735,6 +2828,9 @@ static int bcmgenet_resume(struct device *d)
phy_resume(priv->phydev);
if (priv->eee.eee_enabled)
bcmgenet_eee_enable_set(dev, true);
bcmgenet_netif_start(dev);
return 0;
......
......@@ -573,6 +573,8 @@ struct bcmgenet_priv {
struct device_node *phy_dn;
struct mii_bus *mii_bus;
u16 gphy_rev;
struct clk *clk_eee;
bool clk_eee_enabled;
/* PHY device variables */
int old_link;
......@@ -609,6 +611,8 @@ struct bcmgenet_priv {
u32 wolopts;
struct bcmgenet_mib_counters mib;
struct ethtool_eee eee;
};
#define GENET_IO_MACRO(name, offset) \
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册