提交 6e6a3af7 编写于 作者: O Olof Johansson

Merge tag 'omap-for-v3.10/dt-fixes-for-merge-window' of...

Merge tag 'omap-for-v3.10/dt-fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

From Tony Lindgren:
Omap device tree fixes for issue discovered during the merge window:

- Fix triggering for GPIO interrupts that's needed for 4430sdp
  Ethernet. Otherwise booting with nfsroot won't work.
- Fix CPU operating point values
- Fix wrong assumption that twl PMIC is always connected to omap3
- Add gpmc for am33xx so beaglebone users can use the bus
- Cosmetic fix for mcspi pin muxing to avoid confusion

* tag 'omap-for-v3.10/dt-fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: don't assume boards are using twl4030 for omap3
  ARM: dts: Configure and fix the McSPI pins for 4430sdp
  ARM: dts: AM33XX: Add GPMC node
  ARM: dts: OMAP4460: Fix CPU OPP voltages
  ARM: dts: OMAP36xx: Fix CPU OPP voltages
  ARM: dts: OMAP4: Fix ethernet IRQ for OMAP4 boards
......@@ -403,5 +403,17 @@
0x44d80000 0x2000>; /* M3 DMEM */
ti,hwmods = "wkup_m3";
};
gpmc: gpmc@50000000 {
compatible = "ti,am3352-gpmc";
ti,hwmods = "gpmc";
reg = <0x50000000 0x2000>;
interrupts = <100>;
num-cs = <7>;
num-waitpins = <2>;
#address-cells = <2>;
#size-cells = <1>;
status = "disabled";
};
};
};
......@@ -122,6 +122,7 @@
&usb_otg_hs {
interface-type = <0>;
usb-phy = <&usb2_phy>;
mode = <3>;
power = <50>;
};
......@@ -68,6 +68,7 @@
&usb_otg_hs {
interface-type = <0>;
usb-phy = <&usb2_phy>;
mode = <3>;
power = <50>;
};
......@@ -73,6 +73,7 @@
&usb_otg_hs {
interface-type = <0>;
usb-phy = <&usb2_phy>;
mode = <3>;
power = <50>;
};
......@@ -519,7 +519,6 @@
interrupts = <0 92 0x4>, <0 93 0x4>;
interrupt-names = "mc", "dma";
ti,hwmods = "usb_otg_hs";
usb-phy = <&usb2_phy>;
multipoint = <1>;
num-eps = <16>;
ram-bits = <12>;
......
......@@ -20,9 +20,9 @@
cpu@0 {
operating-points = <
/* kHz uV */
300000 975000
600000 1075000
800000 1200000
300000 1012500
600000 1200000
800000 1325000
>;
clock-latency = <300000>; /* From legacy driver */
};
......
......@@ -223,6 +223,15 @@
>;
};
mcspi1_pins: pinmux_mcspi1_pins {
pinctrl-single,pins = <
0xf2 0x100 /* mcspi1_clk.mcspi1_clk INPUT | MODE0 */
0xf4 0x100 /* mcspi1_somi.mcspi1_somi INPUT | MODE0 */
0xf6 0x100 /* mcspi1_simo.mcspi1_simo INPUT | MODE0 */
0xf8 0x100 /* mcspi1_cs0.mcspi1_cs0 INPUT | MODE0*/
>;
};
dss_hdmi_pins: pinmux_dss_hdmi_pins {
pinctrl-single,pins = <
0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
......@@ -358,12 +367,15 @@
};
&mcspi1 {
pinctrl-names = "default";
pinctrl-0 = <&mcspi1_pins>;
eth@0 {
compatible = "ks8851";
spi-max-frequency = <24000000>;
reg = <0>;
interrupt-parent = <&gpio2>;
interrupts = <2>; /* gpio line 34 */
interrupts = <2 8>; /* gpio line 34, low triggered */
vdd-supply = <&vdd_eth>;
};
};
......
......@@ -68,7 +68,7 @@
spi-max-frequency = <24000000>;
reg = <0>;
interrupt-parent = <&gpio6>;
interrupts = <11>; /* gpio line 171 */
interrupts = <11 8>; /* gpio line 171, low triggered */
vdd-supply = <&vdd_eth>;
};
};
......
......@@ -15,9 +15,9 @@
cpu@0 {
operating-points = <
/* kHz uV */
350000 975000
700000 1075000
920000 1200000
350000 1025000
700000 1200000
920000 1313000
>;
clock-latency = <300000>; /* From legacy driver */
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册