提交 6d348f2c 编写于 作者: M Matt Carlson 提交者: David S. Miller

tg3: Eliminate tg3_nvram_read_swab()

The remaining uses of tg3_nvram_read_swab() either intended to read the
data from NVRAM exactly as tg3_nvram_read_be32() did or hide deeper
interpretations of the data.  For the former case, a direct replacement
of tg3_nvram_read_swab() with tg3_nvram_read_be32() is in order.  For
the latter case, we remove tg3_nvram_read_swab() and document what the
code is really doing.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NBenjamin Li <benli@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 a9dc529d
......@@ -2283,16 +2283,6 @@ static int tg3_nvram_read(struct tg3 *tp, u32 offset, u32 *val)
return ret;
}
static int tg3_nvram_read_swab(struct tg3 *tp, u32 offset, u32 *val)
{
int err;
u32 tmp;
err = tg3_nvram_read(tp, offset, &tmp);
*val = swab32(tmp);
return err;
}
/* Ensures NVRAM data is in bytestream format. */
static int tg3_nvram_read_be32(struct tg3 *tp, u32 offset, __be32 *val)
{
......@@ -10195,9 +10185,20 @@ static void __devinit tg3_get_nvram_size(struct tg3 *tp)
return;
}
if (tg3_nvram_read_swab(tp, 0xf0, &val) == 0) {
if (tg3_nvram_read(tp, 0xf0, &val) == 0) {
if (val != 0) {
tp->nvram_size = (val >> 16) * 1024;
/* This is confusing. We want to operate on the
* 16-bit value at offset 0xf2. The tg3_nvram_read()
* call will read from NVRAM and byteswap the data
* according to the byteswapping settings for all
* other register accesses. This ensures the data we
* want will always reside in the lower 16-bits.
* However, the data in NVRAM is in LE format, which
* means the data from the NVRAM read will always be
* opposite the endianness of the CPU. The 16-bit
* byteswap then brings the data to CPU endianness.
*/
tp->nvram_size = swab16((u16)(val & 0x0000ffff)) * 1024;
return;
}
}
......@@ -11347,7 +11348,7 @@ static int __devinit tg3_phy_probe(struct tg3 *tp)
static void __devinit tg3_read_partno(struct tg3 *tp)
{
unsigned char vpd_data[256];
unsigned char vpd_data[256]; /* in little-endian format */
unsigned int i;
u32 magic;
......@@ -11358,13 +11359,14 @@ static void __devinit tg3_read_partno(struct tg3 *tp)
for (i = 0; i < 256; i += 4) {
u32 tmp;
if (tg3_nvram_read_swab(tp, 0x100 + i, &tmp))
/* The data is in little-endian format in NVRAM.
* Use the big-endian read routines to preserve
* the byte order as it exists in NVRAM.
*/
if (tg3_nvram_read_be32(tp, 0x100 + i, &tmp))
goto out_not_found;
vpd_data[i + 0] = ((tmp >> 0) & 0xff);
vpd_data[i + 1] = ((tmp >> 8) & 0xff);
vpd_data[i + 2] = ((tmp >> 16) & 0xff);
vpd_data[i + 3] = ((tmp >> 24) & 0xff);
memcpy(&vpd_data[i], &tmp, sizeof(tmp));
}
} else {
int vpd_cap;
......@@ -11390,7 +11392,7 @@ static void __devinit tg3_read_partno(struct tg3 *tp)
pci_read_config_dword(tp->pdev, vpd_cap + PCI_VPD_DATA,
&tmp);
v = cpu_to_le32(tmp);
memcpy(&vpd_data[i], &v, 4);
memcpy(&vpd_data[i], &v, sizeof(v));
}
}
......@@ -12358,14 +12360,10 @@ static int __devinit tg3_get_device_address(struct tg3 *tp)
}
if (!addr_ok) {
/* Next, try NVRAM. */
if (!tg3_nvram_read_swab(tp, mac_offset + 0, &hi) &&
!tg3_nvram_read_swab(tp, mac_offset + 4, &lo)) {
dev->dev_addr[0] = ((hi >> 16) & 0xff);
dev->dev_addr[1] = ((hi >> 24) & 0xff);
dev->dev_addr[2] = ((lo >> 0) & 0xff);
dev->dev_addr[3] = ((lo >> 8) & 0xff);
dev->dev_addr[4] = ((lo >> 16) & 0xff);
dev->dev_addr[5] = ((lo >> 24) & 0xff);
if (!tg3_nvram_read_be32(tp, mac_offset + 0, &hi) &&
!tg3_nvram_read_be32(tp, mac_offset + 4, &lo)) {
memcpy(&dev->dev_addr[0], ((char *)&hi) + 2, 2);
memcpy(&dev->dev_addr[2], (char *)&lo, sizeof(lo));
}
/* Finally just fetch it out of the MAC control regs. */
else {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册