提交 6c954667 编写于 作者: L Lin Ming 提交者: Jens Axboe

block: add runtime pm helpers

Add runtime pm helper functions:

void blk_pm_runtime_init(struct request_queue *q, struct device *dev)
  - Initialization function for drivers to call.

int blk_pre_runtime_suspend(struct request_queue *q)
  - If any requests are in the queue, mark last busy and return -EBUSY.
    Otherwise set q->rpm_status to RPM_SUSPENDING and return 0.

void blk_post_runtime_suspend(struct request_queue *q, int err)
  - If the suspend succeeded then set q->rpm_status to RPM_SUSPENDED.
    Otherwise set it to RPM_ACTIVE and mark last busy.

void blk_pre_runtime_resume(struct request_queue *q)
  - Set q->rpm_status to RPM_RESUMING.

void blk_post_runtime_resume(struct request_queue *q, int err)
  - If the resume succeeded then set q->rpm_status to RPM_ACTIVE
    and call __blk_run_queue, then mark last busy and autosuspend.
    Otherwise set q->rpm_status to RPM_SUSPENDED.

The idea and API is designed by Alan Stern and described here:
http://marc.info/?l=linux-scsi&m=133727953625963&w=2Signed-off-by: NLin Ming <ming.m.lin@intel.com>
Signed-off-by: NAaron Lu <aaron.lu@intel.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
上级 66311274
......@@ -30,6 +30,7 @@
#include <linux/list_sort.h>
#include <linux/delay.h>
#include <linux/ratelimit.h>
#include <linux/pm_runtime.h>
#define CREATE_TRACE_POINTS
#include <trace/events/block.h>
......@@ -3045,6 +3046,149 @@ void blk_finish_plug(struct blk_plug *plug)
}
EXPORT_SYMBOL(blk_finish_plug);
#ifdef CONFIG_PM_RUNTIME
/**
* blk_pm_runtime_init - Block layer runtime PM initialization routine
* @q: the queue of the device
* @dev: the device the queue belongs to
*
* Description:
* Initialize runtime-PM-related fields for @q and start auto suspend for
* @dev. Drivers that want to take advantage of request-based runtime PM
* should call this function after @dev has been initialized, and its
* request queue @q has been allocated, and runtime PM for it can not happen
* yet(either due to disabled/forbidden or its usage_count > 0). In most
* cases, driver should call this function before any I/O has taken place.
*
* This function takes care of setting up using auto suspend for the device,
* the autosuspend delay is set to -1 to make runtime suspend impossible
* until an updated value is either set by user or by driver. Drivers do
* not need to touch other autosuspend settings.
*
* The block layer runtime PM is request based, so only works for drivers
* that use request as their IO unit instead of those directly use bio's.
*/
void blk_pm_runtime_init(struct request_queue *q, struct device *dev)
{
q->dev = dev;
q->rpm_status = RPM_ACTIVE;
pm_runtime_set_autosuspend_delay(q->dev, -1);
pm_runtime_use_autosuspend(q->dev);
}
EXPORT_SYMBOL(blk_pm_runtime_init);
/**
* blk_pre_runtime_suspend - Pre runtime suspend check
* @q: the queue of the device
*
* Description:
* This function will check if runtime suspend is allowed for the device
* by examining if there are any requests pending in the queue. If there
* are requests pending, the device can not be runtime suspended; otherwise,
* the queue's status will be updated to SUSPENDING and the driver can
* proceed to suspend the device.
*
* For the not allowed case, we mark last busy for the device so that
* runtime PM core will try to autosuspend it some time later.
*
* This function should be called near the start of the device's
* runtime_suspend callback.
*
* Return:
* 0 - OK to runtime suspend the device
* -EBUSY - Device should not be runtime suspended
*/
int blk_pre_runtime_suspend(struct request_queue *q)
{
int ret = 0;
spin_lock_irq(q->queue_lock);
if (q->nr_pending) {
ret = -EBUSY;
pm_runtime_mark_last_busy(q->dev);
} else {
q->rpm_status = RPM_SUSPENDING;
}
spin_unlock_irq(q->queue_lock);
return ret;
}
EXPORT_SYMBOL(blk_pre_runtime_suspend);
/**
* blk_post_runtime_suspend - Post runtime suspend processing
* @q: the queue of the device
* @err: return value of the device's runtime_suspend function
*
* Description:
* Update the queue's runtime status according to the return value of the
* device's runtime suspend function and mark last busy for the device so
* that PM core will try to auto suspend the device at a later time.
*
* This function should be called near the end of the device's
* runtime_suspend callback.
*/
void blk_post_runtime_suspend(struct request_queue *q, int err)
{
spin_lock_irq(q->queue_lock);
if (!err) {
q->rpm_status = RPM_SUSPENDED;
} else {
q->rpm_status = RPM_ACTIVE;
pm_runtime_mark_last_busy(q->dev);
}
spin_unlock_irq(q->queue_lock);
}
EXPORT_SYMBOL(blk_post_runtime_suspend);
/**
* blk_pre_runtime_resume - Pre runtime resume processing
* @q: the queue of the device
*
* Description:
* Update the queue's runtime status to RESUMING in preparation for the
* runtime resume of the device.
*
* This function should be called near the start of the device's
* runtime_resume callback.
*/
void blk_pre_runtime_resume(struct request_queue *q)
{
spin_lock_irq(q->queue_lock);
q->rpm_status = RPM_RESUMING;
spin_unlock_irq(q->queue_lock);
}
EXPORT_SYMBOL(blk_pre_runtime_resume);
/**
* blk_post_runtime_resume - Post runtime resume processing
* @q: the queue of the device
* @err: return value of the device's runtime_resume function
*
* Description:
* Update the queue's runtime status according to the return value of the
* device's runtime_resume function. If it is successfully resumed, process
* the requests that are queued into the device's queue when it is resuming
* and then mark last busy and initiate autosuspend for it.
*
* This function should be called near the end of the device's
* runtime_resume callback.
*/
void blk_post_runtime_resume(struct request_queue *q, int err)
{
spin_lock_irq(q->queue_lock);
if (!err) {
q->rpm_status = RPM_ACTIVE;
__blk_run_queue(q);
pm_runtime_mark_last_busy(q->dev);
pm_runtime_autosuspend(q->dev);
} else {
q->rpm_status = RPM_SUSPENDED;
}
spin_unlock_irq(q->queue_lock);
}
EXPORT_SYMBOL(blk_post_runtime_resume);
#endif
int __init blk_dev_init(void)
{
BUILD_BUG_ON(__REQ_NR_BITS > 8 *
......
......@@ -361,6 +361,12 @@ struct request_queue {
*/
struct kobject kobj;
#ifdef CONFIG_PM_RUNTIME
struct device *dev;
int rpm_status;
unsigned int nr_pending;
#endif
/*
* queue settings
*/
......@@ -960,6 +966,27 @@ struct request_queue *blk_alloc_queue(gfp_t);
struct request_queue *blk_alloc_queue_node(gfp_t, int);
extern void blk_put_queue(struct request_queue *);
/*
* block layer runtime pm functions
*/
#ifdef CONFIG_PM_RUNTIME
extern void blk_pm_runtime_init(struct request_queue *q, struct device *dev);
extern int blk_pre_runtime_suspend(struct request_queue *q);
extern void blk_post_runtime_suspend(struct request_queue *q, int err);
extern void blk_pre_runtime_resume(struct request_queue *q);
extern void blk_post_runtime_resume(struct request_queue *q, int err);
#else
static inline void blk_pm_runtime_init(struct request_queue *q,
struct device *dev) {}
static inline int blk_pre_runtime_suspend(struct request_queue *q)
{
return -ENOSYS;
}
static inline void blk_post_runtime_suspend(struct request_queue *q, int err) {}
static inline void blk_pre_runtime_resume(struct request_queue *q) {}
static inline void blk_post_runtime_resume(struct request_queue *q, int err) {}
#endif
/*
* blk_plug permits building a queue of related requests by holding the I/O
* fragments for a short period. This allows merging of sequential requests
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册