Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 6c911916 编写于 作者: T Tilman Schmidt 提交者： David S. Miller
浏览文件
操作

gigaset: CAPI module readability improvements 

Replace the "ignoring Additional Info" warning message by better
readable ones citing the specific subparameters being ignored.
Make parts of the code more readable by using a local cmsg
pointer variable.

Impact: readability improvement
Signed-off-by: NTilman Schmidt <tilman@imap.cc>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 dc343475
隐藏空白更改
内联 并排
Showing with 81 addition and 63 deletion
drivers/isdn/gigaset/capi.c
浏览文件 @ 6c911916
...@@ -168,14 +168,6 @@ static inline void ignore_cstruct_param(struct cardstate *cs, _cstruct param, ...@@ -168,14 +168,6 @@ static inline void ignore_cstruct_param(struct cardstate *cs, _cstruct param,
msgname, paramname); msgname, paramname);
} }
static inline void ignore_cmstruct_param(struct cardstate *cs, _cmstruct param,
char *msgname, char *paramname)
{
if (param != CAPI_DEFAULT)
dev_warn(cs->dev, "%s: ignoring unsupported parameter: %s\n",
msgname, paramname);
}
/* /*
* check for legal hex digit * check for legal hex digit
*/ */
...@@ -1062,6 +1054,7 @@ static void do_facility_req(struct gigaset_capi_ctr *iif, ...@@ -1062,6 +1054,7 @@ static void do_facility_req(struct gigaset_capi_ctr *iif,
struct sk_buff *skb) struct sk_buff *skb)
{ {
struct cardstate *cs = iif->ctr.driverdata; struct cardstate *cs = iif->ctr.driverdata;
_cmsg *cmsg = &iif->acmsg;
struct sk_buff *cskb; struct sk_buff *cskb;
u8 *pparam; u8 *pparam;
unsigned int msgsize = CAPI_FACILITY_CONF_BASELEN; unsigned int msgsize = CAPI_FACILITY_CONF_BASELEN;
...@@ -1069,14 +1062,14 @@ static void do_facility_req(struct gigaset_capi_ctr *iif, ...@@ -1069,14 +1062,14 @@ static void do_facility_req(struct gigaset_capi_ctr *iif,
static u8 confparam[10]; /* max. 9 octets + length byte */ static u8 confparam[10]; /* max. 9 octets + length byte */
/* decode message */ /* decode message */
capi_message2cmsg(&iif->acmsg, skb->data); capi_message2cmsg(cmsg, skb->data);
dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg); dump_cmsg(DEBUG_CMD, __func__, cmsg);
/* /*
* Facility Request Parameter is not decoded by capi_message2cmsg() * Facility Request Parameter is not decoded by capi_message2cmsg()
* encoding depends on Facility Selector * encoding depends on Facility Selector
*/ */
switch (iif->acmsg.FacilitySelector) { switch (cmsg->FacilitySelector) {
case CAPI_FACILITY_DTMF: /* ToDo */ case CAPI_FACILITY_DTMF: /* ToDo */
info = CapiFacilityNotSupported; info = CapiFacilityNotSupported;
confparam[0] = 2; /* length */ confparam[0] = 2; /* length */
...@@ -1093,7 +1086,7 @@ static void do_facility_req(struct gigaset_capi_ctr *iif, ...@@ -1093,7 +1086,7 @@ static void do_facility_req(struct gigaset_capi_ctr *iif,
case CAPI_FACILITY_SUPPSVC: case CAPI_FACILITY_SUPPSVC:
/* decode Function parameter */ /* decode Function parameter */
pparam = iif->acmsg.FacilityRequestParameter; pparam = cmsg->FacilityRequestParameter;
if (pparam == NULL || *pparam < 2) { if (pparam == NULL || *pparam < 2) {
dev_notice(cs->dev, "%s: %s missing\n", "FACILITY_REQ", dev_notice(cs->dev, "%s: %s missing\n", "FACILITY_REQ",
"Facility Request Parameter"); "Facility Request Parameter");
...@@ -1141,18 +1134,18 @@ static void do_facility_req(struct gigaset_capi_ctr *iif, ...@@ -1141,18 +1134,18 @@ static void do_facility_req(struct gigaset_capi_ctr *iif,
} }
/* send FACILITY_CONF with given Info and confirmation parameter */ /* send FACILITY_CONF with given Info and confirmation parameter */
capi_cmsg_answer(&iif->acmsg); capi_cmsg_answer(cmsg);
iif->acmsg.Info = info; cmsg->Info = info;
iif->acmsg.FacilityConfirmationParameter = confparam; cmsg->FacilityConfirmationParameter = confparam;
msgsize += confparam[0]; /* length */ msgsize += confparam[0]; /* length */
cskb = alloc_skb(msgsize, GFP_ATOMIC); cskb = alloc_skb(msgsize, GFP_ATOMIC);
if (!cskb) { if (!cskb) {
dev_err(cs->dev, "%s: out of memory\n", __func__); dev_err(cs->dev, "%s: out of memory\n", __func__);
return; return;
} }
capi_cmsg2message(&iif->acmsg, __skb_put(cskb, msgsize)); capi_cmsg2message(cmsg, __skb_put(cskb, msgsize));
dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg); dump_cmsg(DEBUG_CMD, __func__, cmsg);
capi_ctr_handle_message(&iif->ctr, ap->id, cskb); capi_ctr_handle_message(&iif->ctr, ap->id, cskb);
} }
...@@ -1207,8 +1200,8 @@ static void do_connect_req(struct gigaset_capi_ctr *iif, ...@@ -1207,8 +1200,8 @@ static void do_connect_req(struct gigaset_capi_ctr *iif,
u16 info; u16 info;
/* decode message */ /* decode message */
capi_message2cmsg(&iif->acmsg, skb->data); capi_message2cmsg(cmsg, skb->data);
dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg); dump_cmsg(DEBUG_CMD, __func__, cmsg);
/* get free B channel & construct PLCI */ /* get free B channel & construct PLCI */
bcs = gigaset_get_free_channel(cs); bcs = gigaset_get_free_channel(cs);
...@@ -1411,8 +1404,16 @@ static void do_connect_req(struct gigaset_capi_ctr *iif, ...@@ -1411,8 +1404,16 @@ static void do_connect_req(struct gigaset_capi_ctr *iif,
"CONNECT_REQ", "Calling pty subaddr"); "CONNECT_REQ", "Calling pty subaddr");
ignore_cstruct_param(cs, cmsg->LLC, ignore_cstruct_param(cs, cmsg->LLC,
"CONNECT_REQ", "LLC"); "CONNECT_REQ", "LLC");
ignore_cmstruct_param(cs, cmsg->AdditionalInfo, if (cmsg->AdditionalInfo != CAPI_DEFAULT) {
"CONNECT_REQ", "Additional Info"); ignore_cstruct_param(cs, cmsg->BChannelinformation,
"CONNECT_REQ", "B Channel Information");
ignore_cstruct_param(cs, cmsg->Keypadfacility,
"CONNECT_REQ", "Keypad Facility");
ignore_cstruct_param(cs, cmsg->Useruserdata,
"CONNECT_REQ", "User-User Data");
ignore_cstruct_param(cs, cmsg->Facilitydataarray,
"CONNECT_REQ", "Facility Data Array");
}
/* encode parameter: B channel to use */ /* encode parameter: B channel to use */
commands[AT_ISO] = kmalloc(9, GFP_KERNEL); commands[AT_ISO] = kmalloc(9, GFP_KERNEL);
...@@ -1458,8 +1459,8 @@ static void do_connect_resp(struct gigaset_capi_ctr *iif, ...@@ -1458,8 +1459,8 @@ static void do_connect_resp(struct gigaset_capi_ctr *iif,
int channel; int channel;
/* decode message */ /* decode message */
capi_message2cmsg(&iif->acmsg, skb->data); capi_message2cmsg(cmsg, skb->data);
dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg); dump_cmsg(DEBUG_CMD, __func__, cmsg);
dev_kfree_skb(skb); dev_kfree_skb(skb);
/* extract and check channel number from PLCI */ /* extract and check channel number from PLCI */
...@@ -1524,8 +1525,16 @@ static void do_connect_resp(struct gigaset_capi_ctr *iif, ...@@ -1524,8 +1525,16 @@ static void do_connect_resp(struct gigaset_capi_ctr *iif,
"CONNECT_RESP", "Connected Subaddress"); "CONNECT_RESP", "Connected Subaddress");
ignore_cstruct_param(cs, cmsg->LLC, ignore_cstruct_param(cs, cmsg->LLC,
"CONNECT_RESP", "LLC"); "CONNECT_RESP", "LLC");
ignore_cmstruct_param(cs, cmsg->AdditionalInfo, if (cmsg->AdditionalInfo != CAPI_DEFAULT) {
"CONNECT_RESP", "Additional Info"); ignore_cstruct_param(cs, cmsg->BChannelinformation,
"CONNECT_RESP", "BChannel Information");
ignore_cstruct_param(cs, cmsg->Keypadfacility,
"CONNECT_RESP", "Keypad Facility");
ignore_cstruct_param(cs, cmsg->Useruserdata,
"CONNECT_RESP", "User-User Data");
ignore_cstruct_param(cs, cmsg->Facilitydataarray,
"CONNECT_RESP", "Facility Data Array");
}
/* Accept call */ /* Accept call */
if (!gigaset_add_event(cs, &cs->bcs[channel-1].at_state, if (!gigaset_add_event(cs, &cs->bcs[channel-1].at_state,
...@@ -1587,17 +1596,18 @@ static void do_connect_b3_req(struct gigaset_capi_ctr *iif, ...@@ -1587,17 +1596,18 @@ static void do_connect_b3_req(struct gigaset_capi_ctr *iif,
struct sk_buff *skb) struct sk_buff *skb)
{ {
struct cardstate *cs = iif->ctr.driverdata; struct cardstate *cs = iif->ctr.driverdata;
_cmsg *cmsg = &iif->acmsg;
int channel; int channel;
/* decode message */ /* decode message */
capi_message2cmsg(&iif->acmsg, skb->data); capi_message2cmsg(cmsg, skb->data);
dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg); dump_cmsg(DEBUG_CMD, __func__, cmsg);
/* extract and check channel number from PLCI */ /* extract and check channel number from PLCI */
channel = (iif->acmsg.adr.adrPLCI >> 8) & 0xff; channel = (cmsg->adr.adrPLCI >> 8) & 0xff;
if (!channel || channel > cs->channels) { if (!channel || channel > cs->channels) {
dev_notice(cs->dev, "%s: invalid %s 0x%02x\n", dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
"CONNECT_B3_REQ", "PLCI", iif->acmsg.adr.adrPLCI); "CONNECT_B3_REQ", "PLCI", cmsg->adr.adrPLCI);
send_conf(iif, ap, skb, CapiIllContrPlciNcci); send_conf(iif, ap, skb, CapiIllContrPlciNcci);
return; return;
} }
...@@ -1606,14 +1616,12 @@ static void do_connect_b3_req(struct gigaset_capi_ctr *iif, ...@@ -1606,14 +1616,12 @@ static void do_connect_b3_req(struct gigaset_capi_ctr *iif,
ap->connected = APCONN_ACTIVE; ap->connected = APCONN_ACTIVE;
/* build NCCI: always 1 (one B3 connection only) */ /* build NCCI: always 1 (one B3 connection only) */
iif->acmsg.adr.adrNCCI |= 1 << 16; cmsg->adr.adrNCCI |= 1 << 16;
/* NCPI parameter: not applicable for B3 Transparent */ /* NCPI parameter: not applicable for B3 Transparent */
ignore_cstruct_param(cs, iif->acmsg.NCPI, ignore_cstruct_param(cs, cmsg->NCPI, "CONNECT_B3_REQ", "NCPI");
"CONNECT_B3_REQ", "NCPI"); send_conf(iif, ap, skb, (cmsg->NCPI && cmsg->NCPI[0]) ?
send_conf(iif, ap, skb, CapiNcpiNotSupportedByProtocol : CapiSuccess);
(iif->acmsg.NCPI && iif->acmsg.NCPI[0]) ?
CapiNcpiNotSupportedByProtocol : CapiSuccess);
} }
/* /*
...@@ -1628,27 +1636,28 @@ static void do_connect_b3_resp(struct gigaset_capi_ctr *iif, ...@@ -1628,27 +1636,28 @@ static void do_connect_b3_resp(struct gigaset_capi_ctr *iif,
struct sk_buff *skb) struct sk_buff *skb)
{ {
struct cardstate *cs = iif->ctr.driverdata; struct cardstate *cs = iif->ctr.driverdata;
struct bc_state *bcs = NULL; _cmsg *cmsg = &iif->acmsg;
struct bc_state *bcs;
int channel; int channel;
unsigned int msgsize; unsigned int msgsize;
u8 command; u8 command;
/* decode message */ /* decode message */
capi_message2cmsg(&iif->acmsg, skb->data); capi_message2cmsg(cmsg, skb->data);
dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg); dump_cmsg(DEBUG_CMD, __func__, cmsg);
/* extract and check channel number and NCCI */ /* extract and check channel number and NCCI */
channel = (iif->acmsg.adr.adrNCCI >> 8) & 0xff; channel = (cmsg->adr.adrNCCI >> 8) & 0xff;
if (!channel || channel > cs->channels || if (!channel || channel > cs->channels ||
((iif->acmsg.adr.adrNCCI >> 16) & 0xffff) != 1) { ((cmsg->adr.adrNCCI >> 16) & 0xffff) != 1) {
dev_notice(cs->dev, "%s: invalid %s 0x%02x\n", dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
"CONNECT_B3_RESP", "NCCI", iif->acmsg.adr.adrNCCI); "CONNECT_B3_RESP", "NCCI", cmsg->adr.adrNCCI);
dev_kfree_skb(skb); dev_kfree_skb(skb);
return; return;
} }
bcs = &cs->bcs[channel-1]; bcs = &cs->bcs[channel-1];
if (iif->acmsg.Reject) { if (cmsg->Reject) {
/* Reject: clear B3 connect received flag */ /* Reject: clear B3 connect received flag */
ap->connected = APCONN_SETUP; ap->connected = APCONN_SETUP;
...@@ -1673,11 +1682,11 @@ static void do_connect_b3_resp(struct gigaset_capi_ctr *iif, ...@@ -1673,11 +1682,11 @@ static void do_connect_b3_resp(struct gigaset_capi_ctr *iif,
command = CAPI_CONNECT_B3_ACTIVE; command = CAPI_CONNECT_B3_ACTIVE;
msgsize = CAPI_CONNECT_B3_ACTIVE_IND_BASELEN; msgsize = CAPI_CONNECT_B3_ACTIVE_IND_BASELEN;
} }
capi_cmsg_header(&iif->acmsg, ap->id, command, CAPI_IND, capi_cmsg_header(cmsg, ap->id, command, CAPI_IND,
ap->nextMessageNumber++, iif->acmsg.adr.adrNCCI); ap->nextMessageNumber++, cmsg->adr.adrNCCI);
__skb_trim(skb, msgsize); __skb_trim(skb, msgsize);
capi_cmsg2message(&iif->acmsg, skb->data); capi_cmsg2message(cmsg, skb->data);
dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg); dump_cmsg(DEBUG_CMD, __func__, cmsg);
capi_ctr_handle_message(&iif->ctr, ap->id, skb); capi_ctr_handle_message(&iif->ctr, ap->id, skb);
} }
...@@ -1691,28 +1700,37 @@ static void do_disconnect_req(struct gigaset_capi_ctr *iif, ...@@ -1691,28 +1700,37 @@ static void do_disconnect_req(struct gigaset_capi_ctr *iif,
struct sk_buff *skb) struct sk_buff *skb)
{ {
struct cardstate *cs = iif->ctr.driverdata; struct cardstate *cs = iif->ctr.driverdata;
_cmsg *cmsg = &iif->acmsg;
struct bc_state *bcs; struct bc_state *bcs;
_cmsg *b3cmsg; _cmsg *b3cmsg;
struct sk_buff *b3skb; struct sk_buff *b3skb;
int channel; int channel;
/* decode message */ /* decode message */
capi_message2cmsg(&iif->acmsg, skb->data); capi_message2cmsg(cmsg, skb->data);
dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg); dump_cmsg(DEBUG_CMD, __func__, cmsg);
/* extract and check channel number from PLCI */ /* extract and check channel number from PLCI */
channel = (iif->acmsg.adr.adrPLCI >> 8) & 0xff; channel = (cmsg->adr.adrPLCI >> 8) & 0xff;
if (!channel || channel > cs->channels) { if (!channel || channel > cs->channels) {
dev_notice(cs->dev, "%s: invalid %s 0x%02x\n", dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
"DISCONNECT_REQ", "PLCI", iif->acmsg.adr.adrPLCI); "DISCONNECT_REQ", "PLCI", cmsg->adr.adrPLCI);
send_conf(iif, ap, skb, CapiIllContrPlciNcci); send_conf(iif, ap, skb, CapiIllContrPlciNcci);
return; return;
} }
bcs = cs->bcs + channel - 1; bcs = cs->bcs + channel - 1;
/* ToDo: process parameter: Additional info */ /* ToDo: process parameter: Additional info */
ignore_cmstruct_param(cs, iif->acmsg.AdditionalInfo, if (cmsg->AdditionalInfo != CAPI_DEFAULT) {
"DISCONNECT_REQ", "Additional Info"); ignore_cstruct_param(cs, cmsg->BChannelinformation,
"DISCONNECT_REQ", "B Channel Information");
ignore_cstruct_param(cs, cmsg->Keypadfacility,
"DISCONNECT_REQ", "Keypad Facility");
ignore_cstruct_param(cs, cmsg->Useruserdata,
"DISCONNECT_REQ", "User-User Data");
ignore_cstruct_param(cs, cmsg->Facilitydataarray,
"DISCONNECT_REQ", "Facility Data Array");
}
/* skip if DISCONNECT_IND already sent */ /* skip if DISCONNECT_IND already sent */
if (!ap->connected) if (!ap->connected)
...@@ -1733,7 +1751,7 @@ static void do_disconnect_req(struct gigaset_capi_ctr *iif, ...@@ -1733,7 +1751,7 @@ static void do_disconnect_req(struct gigaset_capi_ctr *iif,
} }
capi_cmsg_header(b3cmsg, ap->id, CAPI_DISCONNECT_B3, CAPI_IND, capi_cmsg_header(b3cmsg, ap->id, CAPI_DISCONNECT_B3, CAPI_IND,
ap->nextMessageNumber++, ap->nextMessageNumber++,
iif->acmsg.adr.adrPLCI | (1 << 16)); cmsg->adr.adrPLCI | (1 << 16));
b3cmsg->Reason_B3 = CapiProtocolErrorLayer1; b3cmsg->Reason_B3 = CapiProtocolErrorLayer1;
b3skb = alloc_skb(CAPI_DISCONNECT_B3_IND_BASELEN, GFP_KERNEL); b3skb = alloc_skb(CAPI_DISCONNECT_B3_IND_BASELEN, GFP_KERNEL);
if (b3skb == NULL) { if (b3skb == NULL) {
...@@ -1769,18 +1787,19 @@ static void do_disconnect_b3_req(struct gigaset_capi_ctr *iif, ...@@ -1769,18 +1787,19 @@ static void do_disconnect_b3_req(struct gigaset_capi_ctr *iif,
struct sk_buff *skb) struct sk_buff *skb)
{ {
struct cardstate *cs = iif->ctr.driverdata; struct cardstate *cs = iif->ctr.driverdata;
_cmsg *cmsg = &iif->acmsg;
int channel; int channel;
/* decode message */ /* decode message */
capi_message2cmsg(&iif->acmsg, skb->data); capi_message2cmsg(cmsg, skb->data);
dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg); dump_cmsg(DEBUG_CMD, __func__, cmsg);
/* extract and check channel number and NCCI */ /* extract and check channel number and NCCI */
channel = (iif->acmsg.adr.adrNCCI >> 8) & 0xff; channel = (cmsg->adr.adrNCCI >> 8) & 0xff;
if (!channel || channel > cs->channels || if (!channel || channel > cs->channels ||
((iif->acmsg.adr.adrNCCI >> 16) & 0xffff) != 1) { ((cmsg->adr.adrNCCI >> 16) & 0xffff) != 1) {
dev_notice(cs->dev, "%s: invalid %s 0x%02x\n", dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
"DISCONNECT_B3_REQ", "NCCI", iif->acmsg.adr.adrNCCI); "DISCONNECT_B3_REQ", "NCCI", cmsg->adr.adrNCCI);
send_conf(iif, ap, skb, CapiIllContrPlciNcci); send_conf(iif, ap, skb, CapiIllContrPlciNcci);
return; return;
} }
...@@ -1803,11 +1822,10 @@ static void do_disconnect_b3_req(struct gigaset_capi_ctr *iif, ...@@ -1803,11 +1822,10 @@ static void do_disconnect_b3_req(struct gigaset_capi_ctr *iif,
gigaset_schedule_event(cs); gigaset_schedule_event(cs);
/* NCPI parameter: not applicable for B3 Transparent */ /* NCPI parameter: not applicable for B3 Transparent */
ignore_cstruct_param(cs, iif->acmsg.NCPI, ignore_cstruct_param(cs, cmsg->NCPI,
"DISCONNECT_B3_REQ", "NCPI"); "DISCONNECT_B3_REQ", "NCPI");
send_conf(iif, ap, skb, send_conf(iif, ap, skb, (cmsg->NCPI && cmsg->NCPI[0]) ?
(iif->acmsg.NCPI && iif->acmsg.NCPI[0]) ? CapiNcpiNotSupportedByProtocol : CapiSuccess);
CapiNcpiNotSupportedByProtocol : CapiSuccess);
} }
/* /*
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或