提交 6c7b8412 编写于 作者: V Vikas Manocha 提交者: Greg Kroah-Hartman

Arm: dts: stm32: remove extra compatible string from DT & driver

This patch remove the extra compatibility string "st,stm32-usart" from
driver & device tree.
Signed-off-by: NVikas Manocha <vikas.manocha@st.com>
Reviewed-by: NPatrice Chotard <patrice.chotard@st.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
上级 0dc262f4
......@@ -315,7 +315,7 @@
};
usart2: serial@40004400 {
compatible = "st,stm32-usart", "st,stm32-uart";
compatible = "st,stm32-uart";
reg = <0x40004400 0x400>;
interrupts = <38>;
clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART2)>;
......@@ -323,7 +323,7 @@
};
usart3: serial@40004800 {
compatible = "st,stm32-usart", "st,stm32-uart";
compatible = "st,stm32-uart";
reg = <0x40004800 0x400>;
interrupts = <39>;
clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART3)>;
......@@ -387,7 +387,7 @@
};
usart7: serial@40007800 {
compatible = "st,stm32-usart", "st,stm32-uart";
compatible = "st,stm32-uart";
reg = <0x40007800 0x400>;
interrupts = <82>;
clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART7)>;
......@@ -395,7 +395,7 @@
};
usart8: serial@40007c00 {
compatible = "st,stm32-usart", "st,stm32-uart";
compatible = "st,stm32-uart";
reg = <0x40007c00 0x400>;
interrupts = <83>;
clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART8)>;
......@@ -445,7 +445,7 @@
};
usart1: serial@40011000 {
compatible = "st,stm32-usart", "st,stm32-uart";
compatible = "st,stm32-uart";
reg = <0x40011000 0x400>;
interrupts = <37>;
clocks = <&rcc 0 STM32F4_APB2_CLOCK(USART1)>;
......@@ -456,7 +456,7 @@
};
usart6: serial@40011400 {
compatible = "st,stm32-usart", "st,stm32-uart";
compatible = "st,stm32-uart";
reg = <0x40011400 0x400>;
interrupts = <71>;
clocks = <&rcc 0 STM32F4_APB2_CLOCK(USART6)>;
......
......@@ -136,7 +136,7 @@
};
usart2: serial@40004400 {
compatible = "st,stm32f7-usart", "st,stm32f7-uart";
compatible = "st,stm32f7-uart";
reg = <0x40004400 0x400>;
interrupts = <38>;
clocks = <&rcc 1 CLK_USART2>;
......@@ -144,7 +144,7 @@
};
usart3: serial@40004800 {
compatible = "st,stm32f7-usart", "st,stm32f7-uart";
compatible = "st,stm32f7-uart";
reg = <0x40004800 0x400>;
interrupts = <39>;
clocks = <&rcc 1 CLK_USART3>;
......@@ -177,7 +177,7 @@
};
usart7: serial@40007800 {
compatible = "st,stm32f7-usart", "st,stm32f7-uart";
compatible = "st,stm32f7-uart";
reg = <0x40007800 0x400>;
interrupts = <82>;
clocks = <&rcc 1 CLK_UART7>;
......@@ -185,7 +185,7 @@
};
usart8: serial@40007c00 {
compatible = "st,stm32f7-usart", "st,stm32f7-uart";
compatible = "st,stm32f7-uart";
reg = <0x40007c00 0x400>;
interrupts = <83>;
clocks = <&rcc 1 CLK_UART8>;
......@@ -193,7 +193,7 @@
};
usart1: serial@40011000 {
compatible = "st,stm32f7-usart", "st,stm32f7-uart";
compatible = "st,stm32f7-uart";
reg = <0x40011000 0x400>;
interrupts = <37>;
clocks = <&rcc 1 CLK_USART1>;
......@@ -201,7 +201,7 @@
};
usart6: serial@40011400 {
compatible = "st,stm32f7-usart", "st,stm32f7-uart";
compatible = "st,stm32f7-uart";
reg = <0x40011400 0x400>;
interrupts = <71>;
clocks = <&rcc 1 CLK_USART6>;
......
......@@ -67,7 +67,7 @@
};
usart2: serial@40004400 {
compatible = "st,stm32f7-usart", "st,stm32f7-uart";
compatible = "st,stm32f7-uart";
reg = <0x40004400 0x400>;
interrupts = <38>;
status = "disabled";
......@@ -99,7 +99,7 @@
};
usart1: serial@40011000 {
compatible = "st,stm32f7-usart", "st,stm32f7-uart";
compatible = "st,stm32f7-uart";
reg = <0x40011000 0x400>;
interrupts = <37>;
status = "disabled";
......
......@@ -736,11 +736,8 @@ static struct stm32_port *stm32_of_get_stm32_port(struct platform_device *pdev)
#ifdef CONFIG_OF
static const struct of_device_id stm32_match[] = {
{ .compatible = "st,stm32-usart", .data = &stm32f4_info},
{ .compatible = "st,stm32-uart", .data = &stm32f4_info},
{ .compatible = "st,stm32f7-usart", .data = &stm32f7_info},
{ .compatible = "st,stm32f7-uart", .data = &stm32f7_info},
{ .compatible = "st,stm32h7-usart", .data = &stm32h7_info},
{ .compatible = "st,stm32h7-uart", .data = &stm32h7_info},
{},
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册