Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 6c77161a 编写于 作者: A Abylay Ospan 提交者： Mauro Carvalho Chehab
浏览文件
操作

[media] support DVB-T2 for SONY CXD2841/54 

bandwidth 1.7,5,6,7,8Mhz support for DVB-T2
Signed-off-by: NAbylay Ospan <aospan@netup.ru>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
上级 1cdc4f09
隐藏空白更改
内联 并排
Showing with 322 addition and 148 deletion
drivers/media/dvb-frontends/cxd2841er.c
浏览文件 @ 6c77161a
......@@ -288,6 +288,7 @@ static int cxd2841er_read_regs(struct cxd2841er_priv *priv,
KBUILD_MODNAME, ret, i2c_addr, reg);
return ret;
}
cxd2841er_i2c_debug(priv, i2c_addr, reg, 0, val, len);
return 0;
}
......@@ -789,6 +790,7 @@ static int cxd2841er_shutdown_to_sleep_s(struct cxd2841er_priv *priv)
static int cxd2841er_shutdown_to_sleep_tc(struct cxd2841er_priv *priv)
{
u8 data = 0;
dev_dbg(&priv->i2c->dev, "%s()\n", __func__);
if (priv->state != STATE_SHUTDOWN) {
dev_dbg(&priv->i2c->dev, "%s(): invalid demod state %d\n",
......@@ -804,9 +806,24 @@ static int cxd2841er_shutdown_to_sleep_tc(struct cxd2841er_priv *priv)
cxd2841er_write_reg(priv, I2C_SLVX, 0x00, 0x00);
/* Set demod SW reset */
cxd2841er_write_reg(priv, I2C_SLVX, 0x10, 0x01);
/* Set X'tal clock to 20.5Mhz */
/* Select ADC clock mode */
cxd2841er_write_reg(priv, I2C_SLVX, 0x13, 0x00);
cxd2841er_write_reg(priv, I2C_SLVX, 0x14, 0x00);
switch (priv->xtal) {
case SONY_XTAL_20500:
data = 0x0;
break;
case SONY_XTAL_24000:
/* Select demod frequency */
cxd2841er_write_reg(priv, I2C_SLVX, 0x12, 0x00);
data = 0x3;
break;
case SONY_XTAL_41000:
cxd2841er_write_reg(priv, I2C_SLVX, 0x12, 0x00);
data = 0x1;
break;
}
cxd2841er_write_reg(priv, I2C_SLVX, 0x14, data);
/* Clear demod SW reset */
cxd2841er_write_reg(priv, I2C_SLVX, 0x10, 0x00);
usleep_range(1000, 2000);
......@@ -1175,8 +1192,8 @@ static int cxd2841er_get_carrier_offset_t(struct cxd2841er_priv *priv,
*offset = -1 * sign_extend32(
((u32)(data[0] & 0x1F) << 24) | ((u32)data[1] << 16) |
((u32)data[2] << 8) | (u32)data[3], 29);
*offset *= (bandwidth / 1000000);
*offset /= 235;
*offset *= (bandwidth / 1000000);
*offset /= 235;
return 0;
}
......@@ -1800,15 +1817,18 @@ static int cxd2841er_dvbt2_set_profile(
switch (profile) {
case DVBT2_PROFILE_BASE:
tune_mode = 0x01;
seq_not2d_time = 12;
/* Set early unlock time */
seq_not2d_time = (priv->xtal == SONY_XTAL_24000)?0x0E:0x0C;
break;
case DVBT2_PROFILE_LITE:
tune_mode = 0x05;
seq_not2d_time = 40;
/* Set early unlock time */
seq_not2d_time = (priv->xtal == SONY_XTAL_24000)?0x2E:0x28;
break;
case DVBT2_PROFILE_ANY:
tune_mode = 0x00;
seq_not2d_time = 40;
/* Set early unlock time */
seq_not2d_time = (priv->xtal == SONY_XTAL_24000)?0x2E:0x28;
break;
default:
return -EINVAL;
......@@ -1850,160 +1870,235 @@ static int cxd2841er_sleep_tc_to_active_t2_band(struct cxd2841er_priv *priv,
u32 bandwidth)
{
u32 iffreq;
u8 b20_9f[5];
u8 b10_a6[14];
u8 b10_b6[3];
u8 b10_d7;
u8 data[MAX_WRITE_REGSIZE];
const uint8_t nominalRate8bw[3][5] = {
/* TRCG Nominal Rate [37:0] */
{0x11, 0xF0, 0x00, 0x00, 0x00}, /* 20.5MHz XTal */
{0x15, 0x00, 0x00, 0x00, 0x00}, /* 24MHz XTal */
{0x11, 0xF0, 0x00, 0x00, 0x00} /* 41MHz XTal */
};
const uint8_t nominalRate7bw[3][5] = {
/* TRCG Nominal Rate [37:0] */
{0x14, 0x80, 0x00, 0x00, 0x00}, /* 20.5MHz XTal */
{0x18, 0x00, 0x00, 0x00, 0x00}, /* 24MHz XTal */
{0x14, 0x80, 0x00, 0x00, 0x00} /* 41MHz XTal */
};
const uint8_t nominalRate6bw[3][5] = {
/* TRCG Nominal Rate [37:0] */
{0x17, 0xEA, 0xAA, 0xAA, 0xAA}, /* 20.5MHz XTal */
{0x1C, 0x00, 0x00, 0x00, 0x00}, /* 24MHz XTal */
{0x17, 0xEA, 0xAA, 0xAA, 0xAA} /* 41MHz XTal */
};
const uint8_t nominalRate5bw[3][5] = {
/* TRCG Nominal Rate [37:0] */
{0x1C, 0xB3, 0x33, 0x33, 0x33}, /* 20.5MHz XTal */
{0x21, 0x99, 0x99, 0x99, 0x99}, /* 24MHz XTal */
{0x1C, 0xB3, 0x33, 0x33, 0x33} /* 41MHz XTal */
};
const uint8_t nominalRate17bw[3][5] = {
/* TRCG Nominal Rate [37:0] */
{0x58, 0xE2, 0xAF, 0xE0, 0xBC}, /* 20.5MHz XTal */
{0x68, 0x0F, 0xA2, 0x32, 0xD0}, /* 24MHz XTal */
{0x58, 0xE2, 0xAF, 0xE0, 0xBC} /* 41MHz XTal */
};
const uint8_t itbCoef8bw[3][14] = {
{0x26, 0xAF, 0x06, 0xCD, 0x13, 0xBB, 0x28, 0xBA,
0x23, 0xA9, 0x1F, 0xA8, 0x2C, 0xC8}, /* 20.5MHz XTal */
{0x2F, 0xBA, 0x28, 0x9B, 0x28, 0x9D, 0x28, 0xA1,
0x29, 0xA5, 0x2A, 0xAC, 0x29, 0xB5}, /* 24MHz XTal */
{0x26, 0xAF, 0x06, 0xCD, 0x13, 0xBB, 0x28, 0xBA,
0x23, 0xA9, 0x1F, 0xA8, 0x2C, 0xC8} /* 41MHz XTal */
};
const uint8_t itbCoef7bw[3][14] = {
{0x2C, 0xBD, 0x02, 0xCF, 0x04, 0xF8, 0x23, 0xA6,
0x29, 0xB0, 0x26, 0xA9, 0x21, 0xA5}, /* 20.5MHz XTal */
{0x30, 0xB1, 0x29, 0x9A, 0x28, 0x9C, 0x28, 0xA0,
0x29, 0xA2, 0x2B, 0xA6, 0x2B, 0xAD}, /* 24MHz XTal */
{0x2C, 0xBD, 0x02, 0xCF, 0x04, 0xF8, 0x23, 0xA6,
0x29, 0xB0, 0x26, 0xA9, 0x21, 0xA5} /* 41MHz XTal */
};
const uint8_t itbCoef6bw[3][14] = {
{0x27, 0xA7, 0x28, 0xB3, 0x02, 0xF0, 0x01, 0xE8,
0x00, 0xCF, 0x00, 0xE6, 0x23, 0xA4}, /* 20.5MHz XTal */
{0x31, 0xA8, 0x29, 0x9B, 0x27, 0x9C, 0x28, 0x9E,
0x29, 0xA4, 0x29, 0xA2, 0x29, 0xA8}, /* 24MHz XTal */
{0x27, 0xA7, 0x28, 0xB3, 0x02, 0xF0, 0x01, 0xE8,
0x00, 0xCF, 0x00, 0xE6, 0x23, 0xA4} /* 41MHz XTal */
};
const uint8_t itbCoef5bw[3][14] = {
{0x27, 0xA7, 0x28, 0xB3, 0x02, 0xF0, 0x01, 0xE8,
0x00, 0xCF, 0x00, 0xE6, 0x23, 0xA4}, /* 20.5MHz XTal */
{0x31, 0xA8, 0x29, 0x9B, 0x27, 0x9C, 0x28, 0x9E,
0x29, 0xA4, 0x29, 0xA2, 0x29, 0xA8}, /* 24MHz XTal */
{0x27, 0xA7, 0x28, 0xB3, 0x02, 0xF0, 0x01, 0xE8,
0x00, 0xCF, 0x00, 0xE6, 0x23, 0xA4} /* 41MHz XTal */
};
const uint8_t itbCoef17bw[3][14] = {
{0x25, 0xA0, 0x36, 0x8D, 0x2E, 0x94, 0x28, 0x9B,
0x32, 0x90, 0x2C, 0x9D, 0x29, 0x99}, /* 20.5MHz XTal */
{0x33, 0x8E, 0x2B, 0x97, 0x2D, 0x95, 0x37, 0x8B,
0x30, 0x97, 0x2D, 0x9A, 0x21, 0xA4}, /* 24MHz XTal */
{0x25, 0xA0, 0x36, 0x8D, 0x2E, 0x94, 0x28, 0x9B,
0x32, 0x90, 0x2C, 0x9D, 0x29, 0x99} /* 41MHz XTal */
};
/* Set SLV-T Bank : 0x20 */
cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x20);
dev_dbg(&priv->i2c->dev, "%s()\n", __func__);
switch (bandwidth) {
case 8000000:
/* bank 0x20, reg 0x9f */
b20_9f[0] = 0x11;
b20_9f[1] = 0xf0;
b20_9f[2] = 0x00;
b20_9f[3] = 0x00;
b20_9f[4] = 0x00;
/* bank 0x10, reg 0xa6 */
b10_a6[0] = 0x26;
b10_a6[1] = 0xaf;
b10_a6[2] = 0x06;
b10_a6[3] = 0xcd;
b10_a6[4] = 0x13;
b10_a6[5] = 0xbb;
b10_a6[6] = 0x28;
b10_a6[7] = 0xba;
b10_a6[8] = 0x23;
b10_a6[9] = 0xa9;
b10_a6[10] = 0x1f;
b10_a6[11] = 0xa8;
b10_a6[12] = 0x2c;
b10_a6[13] = 0xc8;
iffreq = MAKE_IFFREQ_CONFIG(4.80);
b10_d7 = 0x00;
/* <Timing Recovery setting> */
cxd2841er_write_regs(priv, I2C_SLVT,
0x9F, nominalRate8bw[priv->xtal], 5);
/* Set SLV-T Bank : 0x27 */
cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x27);
cxd2841er_set_reg_bits(priv, I2C_SLVT,
0x7a, 0x00, 0x0f);
/* Set SLV-T Bank : 0x10 */
cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x10);
/* Group delay equaliser settings for
* ASCOT2D, ASCOT2E and ASCOT3 tuners
*/
cxd2841er_write_regs(priv, I2C_SLVT,
0xA6, itbCoef8bw[priv->xtal], 14);
/* <IF freq setting> */
iffreq = MAKE_IFFREQ_CONFIG_XTAL(priv->xtal, 4.80);
data[0] = (u8) ((iffreq >> 16) & 0xff);
data[1] = (u8)((iffreq >> 8) & 0xff);
data[2] = (u8)(iffreq & 0xff);
cxd2841er_write_regs(priv, I2C_SLVT, 0xB6, data, 3);
/* System bandwidth setting */
cxd2841er_set_reg_bits(
priv, I2C_SLVT, 0xD7, 0x00, 0x07);
break;
case 7000000:
/* bank 0x20, reg 0x9f */
b20_9f[0] = 0x14;
b20_9f[1] = 0x80;
b20_9f[2] = 0x00;
b20_9f[3] = 0x00;
b20_9f[4] = 0x00;
/* bank 0x10, reg 0xa6 */
b10_a6[0] = 0x2C;
b10_a6[1] = 0xBD;
b10_a6[2] = 0x02;
b10_a6[3] = 0xCF;
b10_a6[4] = 0x04;
b10_a6[5] = 0xF8;
b10_a6[6] = 0x23;
b10_a6[7] = 0xA6;
b10_a6[8] = 0x29;
b10_a6[9] = 0xB0;
b10_a6[10] = 0x26;
b10_a6[11] = 0xA9;
b10_a6[12] = 0x21;
b10_a6[13] = 0xA5;
iffreq = MAKE_IFFREQ_CONFIG(4.2);
b10_d7 = 0x02;
/* <Timing Recovery setting> */
cxd2841er_write_regs(priv, I2C_SLVT,
0x9F, nominalRate7bw[priv->xtal], 5);
/* Set SLV-T Bank : 0x27 */
cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x27);
cxd2841er_set_reg_bits(priv, I2C_SLVT,
0x7a, 0x00, 0x0f);
/* Set SLV-T Bank : 0x10 */
cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x10);
/* Group delay equaliser settings for
* ASCOT2D, ASCOT2E and ASCOT3 tuners
*/
cxd2841er_write_regs(priv, I2C_SLVT,
0xA6, itbCoef7bw[priv->xtal], 14);
/* <IF freq setting> */
iffreq = MAKE_IFFREQ_CONFIG_XTAL(priv->xtal, 4.20);
data[0] = (u8) ((iffreq >> 16) & 0xff);
data[1] = (u8)((iffreq >> 8) & 0xff);
data[2] = (u8)(iffreq & 0xff);
cxd2841er_write_regs(priv, I2C_SLVT, 0xB6, data, 3);
/* System bandwidth setting */
cxd2841er_set_reg_bits(
priv, I2C_SLVT, 0xD7, 0x02, 0x07);
break;
case 6000000:
/* bank 0x20, reg 0x9f */
b20_9f[0] = 0x17;
b20_9f[1] = 0xEA;
b20_9f[2] = 0xAA;
b20_9f[3] = 0xAA;
b20_9f[4] = 0xAA;
/* bank 0x10, reg 0xa6 */
b10_a6[0] = 0x27;
b10_a6[1] = 0xA7;
b10_a6[2] = 0x28;
b10_a6[3] = 0xB3;
b10_a6[4] = 0x02;
b10_a6[5] = 0xF0;
b10_a6[6] = 0x01;
b10_a6[7] = 0xE8;
b10_a6[8] = 0x00;
b10_a6[9] = 0xCF;
b10_a6[10] = 0x00;
b10_a6[11] = 0xE6;
b10_a6[12] = 0x23;
b10_a6[13] = 0xA4;
iffreq = MAKE_IFFREQ_CONFIG(3.6);
b10_d7 = 0x04;
/* <Timing Recovery setting> */
cxd2841er_write_regs(priv, I2C_SLVT,
0x9F, nominalRate6bw[priv->xtal], 5);
/* Set SLV-T Bank : 0x27 */
cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x27);
cxd2841er_set_reg_bits(priv, I2C_SLVT,
0x7a, 0x00, 0x0f);
/* Set SLV-T Bank : 0x10 */
cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x10);
/* Group delay equaliser settings for
* ASCOT2D, ASCOT2E and ASCOT3 tuners
*/
cxd2841er_write_regs(priv, I2C_SLVT,
0xA6, itbCoef6bw[priv->xtal], 14);
/* <IF freq setting> */
iffreq = MAKE_IFFREQ_CONFIG_XTAL(priv->xtal, 3.60);
data[0] = (u8) ((iffreq >> 16) & 0xff);
data[1] = (u8)((iffreq >> 8) & 0xff);
data[2] = (u8)(iffreq & 0xff);
cxd2841er_write_regs(priv, I2C_SLVT, 0xB6, data, 3);
/* System bandwidth setting */
cxd2841er_set_reg_bits(
priv, I2C_SLVT, 0xD7, 0x04, 0x07);
break;
case 5000000:
/* bank 0x20, reg 0x9f */
b20_9f[0] = 0x1C;
b20_9f[1] = 0xB3;
b20_9f[2] = 0x33;
b20_9f[3] = 0x33;
b20_9f[4] = 0x33;
/* bank 0x10, reg 0xa6 */
b10_a6[0] = 0x27;
b10_a6[1] = 0xA7;
b10_a6[2] = 0x28;
b10_a6[3] = 0xB3;
b10_a6[4] = 0x02;
b10_a6[5] = 0xF0;
b10_a6[6] = 0x01;
b10_a6[7] = 0xE8;
b10_a6[8] = 0x00;
b10_a6[9] = 0xCF;
b10_a6[10] = 0x00;
b10_a6[11] = 0xE6;
b10_a6[12] = 0x23;
b10_a6[13] = 0xA4;
iffreq = MAKE_IFFREQ_CONFIG(3.6);
b10_d7 = 0x06;
/* <Timing Recovery setting> */
cxd2841er_write_regs(priv, I2C_SLVT,
0x9F, nominalRate5bw[priv->xtal], 5);
/* Set SLV-T Bank : 0x27 */
cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x27);
cxd2841er_set_reg_bits(priv, I2C_SLVT,
0x7a, 0x00, 0x0f);
/* Set SLV-T Bank : 0x10 */
cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x10);
/* Group delay equaliser settings for
* ASCOT2D, ASCOT2E and ASCOT3 tuners
*/
cxd2841er_write_regs(priv, I2C_SLVT,
0xA6, itbCoef5bw[priv->xtal], 14);
/* <IF freq setting> */
iffreq = MAKE_IFFREQ_CONFIG_XTAL(priv->xtal, 3.60);
data[0] = (u8) ((iffreq >> 16) & 0xff);
data[1] = (u8)((iffreq >> 8) & 0xff);
data[2] = (u8)(iffreq & 0xff);
cxd2841er_write_regs(priv, I2C_SLVT, 0xB6, data, 3);
/* System bandwidth setting */
cxd2841er_set_reg_bits(
priv, I2C_SLVT, 0xD7, 0x06, 0x07);
break;
case 1712000:
/* bank 0x20, reg 0x9f */
b20_9f[0] = 0x58;
b20_9f[1] = 0xE2;
b20_9f[2] = 0xAF;
b20_9f[3] = 0xE0;
b20_9f[4] = 0xBC;
/* bank 0x10, reg 0xa6 */
b10_a6[0] = 0x25;
b10_a6[1] = 0xA0;
b10_a6[2] = 0x36;
b10_a6[3] = 0x8D;
b10_a6[4] = 0x2E;
b10_a6[5] = 0x94;
b10_a6[6] = 0x28;
b10_a6[7] = 0x9B;
b10_a6[8] = 0x32;
b10_a6[9] = 0x90;
b10_a6[10] = 0x2C;
b10_a6[11] = 0x9D;
b10_a6[12] = 0x29;
b10_a6[13] = 0x99;
iffreq = MAKE_IFFREQ_CONFIG(3.5);
b10_d7 = 0x03;
/* <Timing Recovery setting> */
cxd2841er_write_regs(priv, I2C_SLVT,
0x9F, nominalRate17bw[priv->xtal], 5);
/* Set SLV-T Bank : 0x27 */
cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x27);
cxd2841er_set_reg_bits(priv, I2C_SLVT,
0x7a, 0x03, 0x0f);
/* Set SLV-T Bank : 0x10 */
cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x10);
/* Group delay equaliser settings for
* ASCOT2D, ASCOT2E and ASCOT3 tuners
*/
cxd2841er_write_regs(priv, I2C_SLVT,
0xA6, itbCoef17bw[priv->xtal], 14);
/* <IF freq setting> */
iffreq = MAKE_IFFREQ_CONFIG_XTAL(priv->xtal, 3.50);
data[0] = (u8) ((iffreq >> 16) & 0xff);
data[1] = (u8)((iffreq >> 8) & 0xff);
data[2] = (u8)(iffreq & 0xff);
cxd2841er_write_regs(priv, I2C_SLVT, 0xB6, data, 3);
/* System bandwidth setting */
cxd2841er_set_reg_bits(
priv, I2C_SLVT, 0xD7, 0x03, 0x07);
break;
default:
return -EINVAL;
}
/* Set SLV-T Bank : 0x20 */
cxd2841er_write_reg(priv, I2C_SLVX, 0x00, 0x20);
cxd2841er_write_regs(priv, I2C_SLVT, 0x9f, b20_9f, sizeof(b20_9f));
/* Set SLV-T Bank : 0x27 */
cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x27);
cxd2841er_set_reg_bits(
priv, I2C_SLVT, 0x7a,
(bandwidth == 1712000 ? 0x03 : 0x00), 0x0f);
/* Set SLV-T Bank : 0x10 */
cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x10);
/* Group delay equaliser sett. for ASCOT2E */
cxd2841er_write_regs(priv, I2C_SLVT, 0xa6, b10_a6, sizeof(b10_a6));
/* <IF freq setting> */
b10_b6[0] = (u8) ((iffreq >> 16) & 0xff);
b10_b6[1] = (u8)((iffreq >> 8) & 0xff);
b10_b6[2] = (u8)(iffreq & 0xff);
cxd2841er_write_regs(priv, I2C_SLVT, 0xb6, b10_b6, sizeof(b10_b6));
/* System bandwidth setting */
cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xd7, b10_d7, 0x07);
return 0;
}
......@@ -2539,7 +2634,7 @@ static int cxd2841er_sleep_tc_to_active_t(struct cxd2841er_priv *priv,
static int cxd2841er_sleep_tc_to_active_t2(struct cxd2841er_priv *priv,
u32 bandwidth)
{
u8 data[2] = { 0x09, 0x54 };
u8 data[MAX_WRITE_REGSIZE];
dev_dbg(&priv->i2c->dev, "%s()\n", __func__);
cxd2841er_set_ts_clock_mode(priv, SYS_DVBT2);
......@@ -2552,12 +2647,21 @@ static int cxd2841er_sleep_tc_to_active_t2(struct cxd2841er_priv *priv,
/* Enable demod clock */
cxd2841er_write_reg(priv, I2C_SLVT, 0x2c, 0x01);
/* Disable RF level monitor */
cxd2841er_write_reg(priv, I2C_SLVT, 0x59, 0x00);
cxd2841er_write_reg(priv, I2C_SLVT, 0x2f, 0x00);
/* Enable ADC clock */
cxd2841er_write_reg(priv, I2C_SLVT, 0x30, 0x00);
/* Enable ADC 1 */
cxd2841er_write_reg(priv, I2C_SLVT, 0x41, 0x1a);
/* xtal freq 20.5MHz */
if (priv->xtal == SONY_XTAL_41000) {
data[0] = 0x0A;
data[1] = 0xD4;
} else {
data[0] = 0x09;
data[1] = 0x54;
}
cxd2841er_write_regs(priv, I2C_SLVT, 0x43, data, 2);
/* Enable ADC 4 */
cxd2841er_write_reg(priv, I2C_SLVX, 0x18, 0x00);
......@@ -2580,6 +2684,10 @@ static int cxd2841er_sleep_tc_to_active_t2(struct cxd2841er_priv *priv,
/* Set SLV-T Bank : 0x2b */
cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x2b);
cxd2841er_set_reg_bits(priv, I2C_SLVT, 0x76, 0x20, 0x70);
/* Set SLV-T Bank : 0x23 */
cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x23);
/* L1 Control setting */
cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xE6, 0x00, 0x03);
/* Set SLV-T Bank : 0x00 */
cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x00);
/* TSIF setting */
......@@ -2598,6 +2706,72 @@ static int cxd2841er_sleep_tc_to_active_t2(struct cxd2841er_priv *priv,
cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x2b);
cxd2841er_set_reg_bits(priv, I2C_SLVT, 0x11, 0x20, 0x3f);
/* 24MHz Xtal setting */
if (priv->xtal == SONY_XTAL_24000) {
/* Set SLV-T Bank : 0x11 */
cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x11);
data[0] = 0xEB;
data[1] = 0x03;
data[2] = 0x3B;
cxd2841er_write_regs(priv, I2C_SLVT, 0x33, data, 3);
/* Set SLV-T Bank : 0x20 */
cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x20);
data[0] = 0x5E;
data[1] = 0x5E;
data[2] = 0x47;
cxd2841er_write_regs(priv, I2C_SLVT, 0x95, data, 3);
cxd2841er_write_reg(priv, I2C_SLVT, 0x99, 0x18);
data[0] = 0x3F;
data[1] = 0xFF;
cxd2841er_write_regs(priv, I2C_SLVT, 0xD9, data, 2);
/* Set SLV-T Bank : 0x24 */
cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x24);
data[0] = 0x0B;
data[1] = 0x72;
cxd2841er_write_regs(priv, I2C_SLVT, 0x34, data, 2);
data[0] = 0x93;
data[1] = 0xF3;
data[2] = 0x00;
cxd2841er_write_regs(priv, I2C_SLVT, 0xD2, data, 3);
data[0] = 0x05;
data[1] = 0xB8;
data[2] = 0xD8;
cxd2841er_write_regs(priv, I2C_SLVT, 0xDD, data, 3);
cxd2841er_write_reg(priv, I2C_SLVT, 0xE0, 0x00);
/* Set SLV-T Bank : 0x25 */
cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x25);
cxd2841er_write_reg(priv, I2C_SLVT, 0xED, 0x60);
/* Set SLV-T Bank : 0x27 */
cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x27);
cxd2841er_write_reg(priv, I2C_SLVT, 0xFA, 0x34);
/* Set SLV-T Bank : 0x2B */
cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x2B);
cxd2841er_write_reg(priv, I2C_SLVT, 0x4B, 0x2F);
cxd2841er_write_reg(priv, I2C_SLVT, 0x9E, 0x0E);
/* Set SLV-T Bank : 0x2D */
cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x2D);
data[0] = 0x89;
data[1] = 0x89;
cxd2841er_write_regs(priv, I2C_SLVT, 0x24, data, 2);
/* Set SLV-T Bank : 0x5E */
cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x5E);
data[0] = 0x24;
data[1] = 0x95;
cxd2841er_write_regs(priv, I2C_SLVT, 0x8C, data, 2);
}
cxd2841er_sleep_tc_to_active_t2_band(priv, bandwidth);
/* Set SLV-T Bank : 0x00 */
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或