提交 6c1ef4b9 编写于 作者: A Arnd Bergmann

Merge tag 'mvebu-defconfig-3.16-2' of git://git.infradead.org/linux-mvebu into next/defconfig

Merge "mvebu defconfig changes for v3.16 (incremental #2)" from Jason Cooper:

 - mvebu
    - enable MSI and XHCI in mvebu_v7_defconfig

* tag 'mvebu-defconfig-3.16-2' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: enable MSI support in mvebu_v7_defconfig
  ARM: configs: enable XHCI mvebu support in mvebu_v7_defconfig
  ARM: multi_v5_defconfig: Enable sound modules needed for t5325
  ARM: mvebu_v5_defconfig: Enable sound modules needed for t5325
  ARM: mvebu: defconfig: add MTD_SPI_NOR (new dependency for M25P80)
  ARM: configs: add ahci_mvebu to mvebu_v7_defconfig
  ARM: configs: add CONFIG_MMC_SDHCI_PXAV3 to the mvebu_v7_defconfig
  ARM: mvebu: enable fhandle in the defconfigs
  ARM: mvebu: Enable nfsroot in the defconfig
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
......@@ -37,7 +37,6 @@ CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
......@@ -48,6 +47,7 @@ CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_SPI_NOR=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=1
......
......@@ -61,6 +61,7 @@ CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ORION=y
CONFIG_MTD_SPI_NOR=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_EEPROM_AT24=y
# CONFIG_SCSI_PROC_FS is not set
......
......@@ -11,7 +11,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_MVEBU=y
CONFIG_MACH_KIRKWOOD=y
CONFIG_MACH_T5325=y
CONFIG_ARCH_MXC=y
CONFIG_MACH_IMX25_DT=y
CONFIG_MACH_IMX27_DT=y
......@@ -108,6 +107,8 @@ CONFIG_SND=y
CONFIG_SND_SOC=y
CONFIG_SND_KIRKWOOD_SOC=y
CONFIG_SND_KIRKWOOD_SOC_T5325=y
CONFIG_SND_SOC_ALC5623=y
CONFIG_SND_SIMPLE_CARD=y
# CONFIG_ABX500_CORE is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
......
CONFIG_SYSVIPC=y
CONFIG_FHANDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_LOG_BUF_SHIFT=19
......@@ -11,7 +12,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_MVEBU=y
CONFIG_MACH_KIRKWOOD=y
CONFIG_MACH_T5325=y
# CONFIG_CPU_FEROCEON_OLD_ID is not set
CONFIG_PCI_MVEBU=y
CONFIG_PREEMPT=y
......@@ -50,6 +50,7 @@ CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ORION=y
CONFIG_MTD_SPI_NOR=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_EEPROM_AT24=y
# CONFIG_SCSI_PROC_FS is not set
......@@ -100,6 +101,8 @@ CONFIG_SND=y
CONFIG_SND_SOC=y
CONFIG_SND_KIRKWOOD_SOC=y
CONFIG_SND_KIRKWOOD_SOC_T5325=y
CONFIG_SND_SOC_ALC5623=y
CONFIG_SND_SIMPLE_CARD=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_HID_DRAGONRISE=y
......
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_FHANDLE=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_LOG_BUF_SHIFT=14
......@@ -17,6 +18,7 @@ CONFIG_NEON=y
# CONFIG_CACHE_L2X0 is not set
# CONFIG_SWP_EMULATE is not set
CONFIG_PCI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MVEBU=y
CONFIG_SMP=y
CONFIG_AEABI=y
......@@ -29,6 +31,9 @@ CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_VFP=y
CONFIG_NET=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_BT=y
CONFIG_BT_MRVL=y
CONFIG_BT_MRVL_SDIO=y
......@@ -36,6 +41,7 @@ CONFIG_CFG80211=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_BLK_DEV_SD=y
CONFIG_ATA=y
CONFIG_AHCI_MVEBU=y
CONFIG_SATA_MV=y
CONFIG_NETDEVICES=y
CONFIG_MVNETA=y
......@@ -53,6 +59,7 @@ CONFIG_I2C_MV64XXX=y
CONFIG_MTD=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
......@@ -78,7 +85,9 @@ CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_STORAGE=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_MVEBU=y
CONFIG_MMC=y
CONFIG_MMC_SDHCI_PXAV3=y
CONFIG_MMC_MVSDIO=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_GPIO=y
......@@ -103,6 +112,8 @@ CONFIG_UDF_FS=m
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_ISO8859_1=y
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册