drm/rockchip: pre dither down when output bpc is 8bit

Some encoder have a crc verification check, crc check fail if
input and output data is not equal.

That means encoder input and output need use same color depth,
vop can output 10bit data to encoder, but some panel only support
8bit depth, that would make crc check die.

So pre dither down vop data to 8bit if panel's bpc is 8.
Signed-off-by: NMark Yao <mark.yao@rock-chips.com>
[seanpaul resolved conflict in rockchip_drm_vop.c]
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NThierry Escande <thierry.escande@collabora.com>
Signed-off-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-22-enric.balletbo@collabora.com

drivers/gpu/drm/rockchip/analogix_dp-rockchip.c

@@ -218,6 +218,7 @@ rockchip_dp_drm_encoder_atomic_check(struct drm_encoder *encoder,
 				      struct drm_connector_state *conn_state)
 {
 	struct rockchip_crtc_state *s = to_rockchip_crtc_state(crtc_state);
+	struct drm_display_info *di = &conn_state->connector->display_info;
 
 	/*
 	 * The hardware IC designed that VOP must output the RGB10 video
@@ -229,6 +230,7 @@ rockchip_dp_drm_encoder_atomic_check(struct drm_encoder *encoder,
 
 	s->output_mode = ROCKCHIP_OUT_MODE_AAAA;
 	s->output_type = DRM_MODE_CONNECTOR_eDP;
+	s->output_bpc = di->bpc;
 
 	return 0;
 }

drivers/gpu/drm/rockchip/rockchip_drm_drv.h

@@ -36,6 +36,7 @@ struct rockchip_crtc_state {
 	struct drm_crtc_state base;
 	int output_type;
 	int output_mode;
+	int output_bpc;
 };
 #define to_rockchip_crtc_state(s) \
 		container_of(s, struct rockchip_crtc_state, base)

drivers/gpu/drm/rockchip/rockchip_drm_vop.c

@@ -925,6 +925,12 @@ static void vop_crtc_atomic_enable(struct drm_crtc *crtc,
 	if (s->output_mode == ROCKCHIP_OUT_MODE_AAAA &&
 	    !(vop_data->feature & VOP_FEATURE_OUTPUT_RGB10))
 		s->output_mode = ROCKCHIP_OUT_MODE_P888;
+
+	if (s->output_mode == ROCKCHIP_OUT_MODE_AAAA && s->output_bpc == 8)
+		VOP_REG_SET(vop, common, pre_dither_down, 1);
+	else
+		VOP_REG_SET(vop, common, pre_dither_down, 0);
+
 	VOP_REG_SET(vop, common, out_mode, s->output_mode);
 
 	VOP_REG_SET(vop, modeset, htotal_pw, (htotal << 16) | hsync_len);

drivers/gpu/drm/rockchip/rockchip_drm_vop.h

@@ -67,6 +67,7 @@ struct vop_common {
 	struct vop_reg cfg_done;
 	struct vop_reg dsp_blank;
 	struct vop_reg data_blank;
+	struct vop_reg pre_dither_down;
 	struct vop_reg dither_down;
 	struct vop_reg dither_up;
 	struct vop_reg gate_en;

drivers/gpu/drm/rockchip/rockchip_vop_reg.c

@@ -264,6 +264,7 @@ static const struct vop_common rk3288_common = {
 	.standby = VOP_REG_SYNC(RK3288_SYS_CTRL, 0x1, 22),
 	.gate_en = VOP_REG(RK3288_SYS_CTRL, 0x1, 23),
 	.mmu_en = VOP_REG(RK3288_SYS_CTRL, 0x1, 20),
+	.pre_dither_down = VOP_REG(RK3288_DSP_CTRL1, 0x1, 1),
 	.dither_down = VOP_REG(RK3288_DSP_CTRL1, 0xf, 1),
 	.dither_up = VOP_REG(RK3288_DSP_CTRL1, 0x1, 6),
 	.data_blank = VOP_REG(RK3288_DSP_CTRL0, 0x1, 19),