Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Merge 'net' bug fixes into 'net-next' as we have patches
that will build on top of them.

This merge commit includes a change from Emil Goode
(emilgoode@gmail.com) that fixes a warning that would
have been introduced by this merge.  Specifically it
fixes the pingv6_ops method ipv6_chk_addr() to add a
"const" to the "struct net_device *dev" argument and
likewise update the dummy_ipv6_chk_addr() declaration.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/macb.txt

@@ -4,7 +4,7 @@ Required properties:
 - compatible: Should be "cdns,[<chip>-]{macb|gem}"
   Use "cdns,at91sam9260-macb" Atmel at91sam9260 and at91sam9263 SoCs.
   Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb".
-  Use "cnds,pc302-gem" for Picochip picoXcell pc302 and later devices based on
+  Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on
   the Cadence GEM, or the generic form: "cdns,gem".
 - reg: Address and length of the register set for the device
 - interrupts: Should contain macb interrupt

Documentation/devicetree/bindings/video/simple-framebuffer.txt

+Simple Framebuffer
+
+A simple frame-buffer describes a raw memory region that may be rendered to,
+with the assumption that the display hardware has already been set up to scan
+out from that buffer.
+
+Required properties:
+- compatible: "simple-framebuffer"
+- reg: Should contain the location and size of the framebuffer memory.
+- width: The width of the framebuffer in pixels.
+- height: The height of the framebuffer in pixels.
+- stride: The number of bytes in each line of the framebuffer.
+- format: The format of the framebuffer surface. Valid values are:
+  - r5g6b5 (16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b).
+
+Example:
+
+	framebuffer {
+		compatible = "simple-framebuffer";
+		reg = <0x1d385000 (1600 * 1200 * 2)>;
+		width = <1600>;
+		height = <1200>;
+		stride = <(1600 * 2)>;
+		format = "r5g6b5";
+	};

Documentation/powerpc/transactional_memory.txt

@@ -147,6 +147,25 @@ Example signal handler:
       fix_the_problem(ucp->dar);
     }
 
+When in an active transaction that takes a signal, we need to be careful with
+the stack.  It's possible that the stack has moved back up after the tbegin.
+The obvious case here is when the tbegin is called inside a function that
+returns before a tend.  In this case, the stack is part of the checkpointed
+transactional memory state.  If we write over this non transactionally or in
+suspend, we are in trouble because if we get a tm abort, the program counter and
+stack pointer will be back at the tbegin but our in memory stack won't be valid
+anymore.
+
+To avoid this, when taking a signal in an active transaction, we need to use
+the stack pointer from the checkpointed state, rather than the speculated
+state.  This ensures that the signal context (written tm suspended) will be
+written below the stack required for the rollback.  The transaction is aborted
+becuase of the treclaim, so any memory written between the tbegin and the
+signal will be rolled back anyway.
+
+For signals taken in non-TM or suspended mode, we use the
+normal/non-checkpointed stack pointer.
+
 
 Failure cause codes used by kernel
 ==================================
@@ -155,14 +174,18 @@ These are defined in <asm/reg.h>, and distinguish different reasons why the
 kernel aborted a transaction:
 
  TM_CAUSE_RESCHED       Thread was rescheduled.
+ TM_CAUSE_TLBI          Software TLB invalide.
  TM_CAUSE_FAC_UNAV      FP/VEC/VSX unavailable trap.
  TM_CAUSE_SYSCALL       Currently unused; future syscalls that must abort
                         transactions for consistency will use this.
  TM_CAUSE_SIGNAL        Signal delivered.
  TM_CAUSE_MISC          Currently unused.
+ TM_CAUSE_ALIGNMENT     Alignment fault.
+ TM_CAUSE_EMULATE       Emulation that touched memory.
 
-These can be checked by the user program's abort handler as TEXASR[0:7].
-
+These can be checked by the user program's abort handler as TEXASR[0:7].  If
+bit 7 is set, it indicates that the error is consider persistent.  For example
+a TM_CAUSE_ALIGNMENT will be persistent while a TM_CAUSE_RESCHED will not.q
 
 GDB
 ===

Documentation/rapidio/rapidio.txt

@@ -79,20 +79,63 @@ master port that is used to communicate with devices within the network.
 In order to initialize the RapidIO subsystem, a platform must initialize and
 register at least one master port within the RapidIO network. To register mport
 within the subsystem controller driver initialization code calls function
-rio_register_mport() for each available master port. After all active master
-ports are registered with a RapidIO subsystem, the rio_init_mports() routine
-is called to perform enumeration and discovery.
+rio_register_mport() for each available master port.
 
-In the current PowerPC-based implementation a subsys_initcall() is specified to
-perform controller initialization and mport registration. At the end it directly
-calls rio_init_mports() to execute RapidIO enumeration and discovery.
+RapidIO subsystem uses subsys_initcall() or device_initcall() to perform
+controller initialization (depending on controller device type).
+
+After all active master ports are registered with a RapidIO subsystem,
+an enumeration and/or discovery routine may be called automatically or
+by user-space command.
 
 4. Enumeration and Discovery
 ----------------------------
 
-When rio_init_mports() is called it scans a list of registered master ports and
-calls an enumeration or discovery routine depending on the configured role of a
-master port: host or agent.
+4.1 Overview
+------------
+
+RapidIO subsystem configuration options allow users to specify enumeration and
+discovery methods as statically linked components or loadable modules.
+An enumeration/discovery method implementation and available input parameters
+define how any given method can be attached to available RapidIO mports:
+simply to all available mports OR individually to the specified mport device.
+
+Depending on selected enumeration/discovery build configuration, there are
+several methods to initiate an enumeration and/or discovery process:
+
+  (a) Statically linked enumeration and discovery process can be started
+  automatically during kernel initialization time using corresponding module
+  parameters. This was the original method used since introduction of RapidIO
+  subsystem. Now this method relies on enumerator module parameter which is
+  'rio-scan.scan' for existing basic enumeration/discovery method.
+  When automatic start of enumeration/discovery is used a user has to ensure
+  that all discovering endpoints are started before the enumerating endpoint
+  and are waiting for enumeration to be completed.
+  Configuration option CONFIG_RAPIDIO_DISC_TIMEOUT defines time that discovering
+  endpoint waits for enumeration to be completed. If the specified timeout
+  expires the discovery process is terminated without obtaining RapidIO network
+  information. NOTE: a timed out discovery process may be restarted later using
+  a user-space command as it is described later if the given endpoint was
+  enumerated successfully.
+
+  (b) Statically linked enumeration and discovery process can be started by
+  a command from user space. This initiation method provides more flexibility
+  for a system startup compared to the option (a) above. After all participating
+  endpoints have been successfully booted, an enumeration process shall be
+  started first by issuing a user-space command, after an enumeration is
+  completed a discovery process can be started on all remaining endpoints.
+
+  (c) Modular enumeration and discovery process can be started by a command from
+  user space. After an enumeration/discovery module is loaded, a network scan
+  process can be started by issuing a user-space command.
+  Similar to the option (b) above, an enumerator has to be started first.
+
+  (d) Modular enumeration and discovery process can be started by a module
+  initialization routine. In this case an enumerating module shall be loaded
+  first.
+
+When a network scan process is started it calls an enumeration or discovery
+routine depending on the configured role of a master port: host or agent.
 
 Enumeration is performed by a master port if it is configured as a host port by
 assigning a host device ID greater than or equal to zero. A host device ID is
@@ -104,8 +147,58 @@ for it.
 The enumeration and discovery routines use RapidIO maintenance transactions
 to access the configuration space of devices.
 
-The enumeration process is implemented according to the enumeration algorithm
-outlined in the RapidIO Interconnect Specification: Annex I [1].
+4.2 Automatic Start of Enumeration and Discovery
+------------------------------------------------
+
+Automatic enumeration/discovery start method is applicable only to built-in
+enumeration/discovery RapidIO configuration selection. To enable automatic
+enumeration/discovery start by existing basic enumerator method set use boot
+command line parameter "rio-scan.scan=1".
+
+This configuration requires synchronized start of all RapidIO endpoints that
+form a network which will be enumerated/discovered. Discovering endpoints have
+to be started before an enumeration starts to ensure that all RapidIO
+controllers have been initialized and are ready to be discovered. Configuration
+parameter CONFIG_RAPIDIO_DISC_TIMEOUT defines time (in seconds) which
+a discovering endpoint will wait for enumeration to be completed.
+
+When automatic enumeration/discovery start is selected, basic method's
+initialization routine calls rio_init_mports() to perform enumeration or
+discovery for all known mport devices.
+
+Depending on RapidIO network size and configuration this automatic
+enumeration/discovery start method may be difficult to use due to the
+requirement for synchronized start of all endpoints.
+
+4.3 User-space Start of Enumeration and Discovery
+-------------------------------------------------
+
+User-space start of enumeration and discovery can be used with built-in and
+modular build configurations. For user-space controlled start RapidIO subsystem
+creates the sysfs write-only attribute file '/sys/bus/rapidio/scan'. To initiate
+an enumeration or discovery process on specific mport device, a user needs to
+write mport_ID (not RapidIO destination ID) into that file. The mport_ID is a
+sequential number (0 ... RIO_MAX_MPORTS) assigned during mport device
+registration. For example for machine with single RapidIO controller, mport_ID
+for that controller always will be 0.
+
+To initiate RapidIO enumeration/discovery on all available mports a user may
+write '-1' (or RIO_MPORT_ANY) into the scan attribute file.
+
+4.4 Basic Enumeration Method
+----------------------------
+
+This is an original enumeration/discovery method which is available since
+first release of RapidIO subsystem code. The enumeration process is
+implemented according to the enumeration algorithm outlined in the RapidIO
+Interconnect Specification: Annex I [1].
+
+This method can be configured as statically linked or loadable module.
+The method's single parameter "scan" allows to trigger the enumeration/discovery
+process from module initialization routine.
+
+This enumeration/discovery method can be started only once and does not support
+unloading if it is built as a module.
 
 The enumeration process traverses the network using a recursive depth-first
 algorithm. When a new device is found, the enumerator takes ownership of that
@@ -160,6 +253,19 @@ time period. If this wait time period expires before enumeration is completed,
 an agent skips RapidIO discovery and continues with remaining kernel
 initialization.
 
+4.5 Adding New Enumeration/Discovery Method
+-------------------------------------------
+
+RapidIO subsystem code organization allows addition of new enumeration/discovery
+methods as new configuration options without significant impact to to the core
+RapidIO code.
+
+A new enumeration/discovery method has to be attached to one or more mport
+devices before an enumeration/discovery process can be started. Normally,
+method's module initialization routine calls rio_register_scan() to attach
+an enumerator to a specified mport device (or devices). The basic enumerator
+implementation demonstrates this process.
+
 5. References
 -------------
 

Documentation/rapidio/sysfs.txt

@@ -88,3 +88,20 @@ that exports additional attributes.
 
 IDT_GEN2:
  errlog - reads contents of device error log until it is empty.
+
+
+5. RapidIO Bus Attributes
+-------------------------
+
+RapidIO bus subdirectory /sys/bus/rapidio implements the following bus-specific
+attribute:
+
+  scan - allows to trigger enumeration discovery process from user space. This
+	 is a write-only attribute. To initiate an enumeration or discovery
+	 process on specific mport device, a user needs to write mport_ID (not
+	 RapidIO destination ID) into this file. The mport_ID is a sequential
+	 number (0 ... RIO_MAX_MPORTS) assigned to the mport device.
+	 For example, for a machine with a single RapidIO controller, mport_ID
+	 for that controller always will be 0.
+	 To initiate RapidIO enumeration/discovery on all available mports
+	 a user must write '-1' (or RIO_MPORT_ANY) into this attribute file.

MAINTAINERS

@@ -3322,11 +3322,12 @@ F:	drivers/net/wan/dlci.c
 F:	drivers/net/wan/sdla.c
 
 FRAMEBUFFER LAYER
-M:	Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
+M:	Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
+M:	Tomi Valkeinen <tomi.valkeinen@ti.com>
 L:	linux-fbdev@vger.kernel.org
 W:	http://linux-fbdev.sourceforge.net/
 Q:	http://patchwork.kernel.org/project/linux-fbdev/list/
-T:	git git://github.com/schandinat/linux-2.6.git fbdev-next
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/plagnioj/linux-fbdev.git
 S:	Maintained
 F:	Documentation/fb/
 F:	Documentation/devicetree/bindings/fb/
@@ -6084,9 +6085,18 @@ L:	linux-parisc@vger.kernel.org
 W:	http://www.parisc-linux.org/
 Q:	http://patchwork.kernel.org/project/linux-parisc/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux.git
 S:	Maintained
 F:	arch/parisc/
+F:	Documentation/parisc/
 F:	drivers/parisc/
+F:	drivers/char/agp/parisc-agp.c
+F:	drivers/input/serio/gscps2.c
+F:	drivers/parport/parport_gsc.*
+F:	drivers/tty/serial/8250/8250_gsc.c
+F:	drivers/video/sti*
+F:	drivers/video/console/sti*
+F:	drivers/video/logo/logo_parisc*
 
 PC87360 HARDWARE MONITORING DRIVER
 M:	Jim Cromie <jim.cromie@gmail.com>

Makefile

 VERSION = 3
 PATCHLEVEL = 10
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc4
 NAME = Unicycling Gorilla
 
 # *DOCUMENTATION*

arch/arc/boot/dts/abilis_tb100_dvk.dts

@@ -37,7 +37,7 @@
 
 	soc100 {
 		uart@FF100000 {
-			pinctrl-names = "abilis,simple-default";
+			pinctrl-names = "default";
 			pinctrl-0 = <&pctl_uart0>;
 		};
 		ethernet@FE100000 {

arch/arc/boot/dts/abilis_tb101_dvk.dts

@@ -37,7 +37,7 @@
 
 	soc100 {
 		uart@FF100000 {
-			pinctrl-names = "abilis,simple-default";
+			pinctrl-names = "default";
 			pinctrl-0 = <&pctl_uart0>;
 		};
 		ethernet@FE100000 {

arch/arc/boot/dts/abilis_tb10x.dtsi

@@ -88,8 +88,7 @@
 		};
 
 		uart@FF100000 {
-			compatible = "snps,dw-apb-uart",
-					"abilis,simple-pinctrl";
+			compatible = "snps,dw-apb-uart";
 			reg = <0xFF100000 0x100>;
 			clock-frequency = <166666666>;
 			interrupts = <25 1>;
@@ -184,8 +183,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			cell-index = <1>;
-			compatible = "abilis,tb100-spi",
-					"abilis,simple-pinctrl";
+			compatible = "abilis,tb100-spi";
 			num-cs = <2>;
 			reg = <0xFE011000 0x20>;
 			interrupt-parent = <&tb10x_ictl>;

arch/arc/include/asm/cacheflush.h

@@ -93,14 +93,16 @@ static inline int cache_is_vipt_aliasing(void)
 #endif
 }
 
-#define CACHE_COLOR(addr)	(((unsigned long)(addr) >> (PAGE_SHIFT)) & 3)
+#define CACHE_COLOR(addr)	(((unsigned long)(addr) >> (PAGE_SHIFT)) & 1)
 
 /*
  * checks if two addresses (after page aligning) index into same cache set
  */
 #define addr_not_cache_congruent(addr1, addr2)				\
+({									\
 	cache_is_vipt_aliasing() ? 					\
-		(CACHE_COLOR(addr1) != CACHE_COLOR(addr2)) : 0		\
+		(CACHE_COLOR(addr1) != CACHE_COLOR(addr2)) : 0;		\
+})
 
 #define copy_to_user_page(vma, page, vaddr, dst, src, len)		\
 do {									\

arch/arc/include/asm/page.h

@@ -19,13 +19,6 @@
 #define clear_page(paddr)		memset((paddr), 0, PAGE_SIZE)
 #define copy_page(to, from)		memcpy((to), (from), PAGE_SIZE)
 
-#ifndef CONFIG_ARC_CACHE_VIPT_ALIASING
-
-#define clear_user_page(addr, vaddr, pg)	clear_page(addr)
-#define copy_user_page(vto, vfrom, vaddr, pg)	copy_page(vto, vfrom)
-
-#else	/* VIPT aliasing dcache */
-
 struct vm_area_struct;
 struct page;
 
@@ -35,8 +28,6 @@ void copy_user_highpage(struct page *to, struct page *from,
 			unsigned long u_vaddr, struct vm_area_struct *vma);
 void clear_user_page(void *to, unsigned long u_vaddr, struct page *page);
 
-#endif	/* CONFIG_ARC_CACHE_VIPT_ALIASING */
-
 #undef STRICT_MM_TYPECHECKS
 
 #ifdef STRICT_MM_TYPECHECKS

arch/arc/include/asm/pgtable.h

@@ -57,9 +57,9 @@
 
 #define _PAGE_ACCESSED      (1<<1)	/* Page is accessed (S) */
 #define _PAGE_CACHEABLE     (1<<2)	/* Page is cached (H) */
-#define _PAGE_EXECUTE       (1<<3)	/* Page has user execute perm (H) */
-#define _PAGE_WRITE         (1<<4)	/* Page has user write perm (H) */
-#define _PAGE_READ          (1<<5)	/* Page has user read perm (H) */
+#define _PAGE_U_EXECUTE     (1<<3)	/* Page has user execute perm (H) */
+#define _PAGE_U_WRITE       (1<<4)	/* Page has user write perm (H) */
+#define _PAGE_U_READ        (1<<5)	/* Page has user read perm (H) */
 #define _PAGE_K_EXECUTE     (1<<6)	/* Page has kernel execute perm (H) */
 #define _PAGE_K_WRITE       (1<<7)	/* Page has kernel write perm (H) */
 #define _PAGE_K_READ        (1<<8)	/* Page has kernel perm (H) */
@@ -72,9 +72,9 @@
 
 /* PD1 */
 #define _PAGE_CACHEABLE     (1<<0)	/* Page is cached (H) */
-#define _PAGE_EXECUTE       (1<<1)	/* Page has user execute perm (H) */
-#define _PAGE_WRITE         (1<<2)	/* Page has user write perm (H) */
-#define _PAGE_READ          (1<<3)	/* Page has user read perm (H) */
+#define _PAGE_U_EXECUTE     (1<<1)	/* Page has user execute perm (H) */
+#define _PAGE_U_WRITE       (1<<2)	/* Page has user write perm (H) */
+#define _PAGE_U_READ        (1<<3)	/* Page has user read perm (H) */
 #define _PAGE_K_EXECUTE     (1<<4)	/* Page has kernel execute perm (H) */
 #define _PAGE_K_WRITE       (1<<5)	/* Page has kernel write perm (H) */
 #define _PAGE_K_READ        (1<<6)	/* Page has kernel perm (H) */
@@ -93,7 +93,8 @@
 #endif
 
 /* Kernel allowed all permissions for all pages */
-#define _K_PAGE_PERMS  (_PAGE_K_EXECUTE | _PAGE_K_WRITE | _PAGE_K_READ)
+#define _K_PAGE_PERMS  (_PAGE_K_EXECUTE | _PAGE_K_WRITE | _PAGE_K_READ | \
+			_PAGE_GLOBAL | _PAGE_PRESENT)
 
 #ifdef CONFIG_ARC_CACHE_PAGES
 #define _PAGE_DEF_CACHEABLE _PAGE_CACHEABLE
@@ -106,7 +107,11 @@
  * -by default cached, unless config otherwise
  * -present in memory
  */
-#define ___DEF (_PAGE_PRESENT | _K_PAGE_PERMS | _PAGE_DEF_CACHEABLE)
+#define ___DEF (_PAGE_PRESENT | _PAGE_DEF_CACHEABLE)
+
+#define _PAGE_READ	(_PAGE_U_READ    | _PAGE_K_READ)
+#define _PAGE_WRITE	(_PAGE_U_WRITE   | _PAGE_K_WRITE)
+#define _PAGE_EXECUTE	(_PAGE_U_EXECUTE | _PAGE_K_EXECUTE)
 
 /* Set of bits not changed in pte_modify */
 #define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED)
@@ -125,11 +130,10 @@
  * kernel vaddr space - visible in all addr spaces, but kernel mode only
  * Thus Global, all-kernel-access, no-user-access, cached
  */
-#define PAGE_KERNEL          __pgprot(___DEF | _PAGE_GLOBAL)
+#define PAGE_KERNEL          __pgprot(_K_PAGE_PERMS | _PAGE_DEF_CACHEABLE)
 
 /* ioremap */
-#define PAGE_KERNEL_NO_CACHE __pgprot(_PAGE_PRESENT | _K_PAGE_PERMS | \
-						     _PAGE_GLOBAL)
+#define PAGE_KERNEL_NO_CACHE __pgprot(_K_PAGE_PERMS)
 
 /**************************************************************************
  * Mapping of vm_flags (Generic VM) to PTE flags (arch specific)

arch/arc/include/asm/tlb.h

@@ -16,7 +16,7 @@
 /* Masks for actual TLB "PD"s */
 #define PTE_BITS_IN_PD0	(_PAGE_GLOBAL | _PAGE_PRESENT)
 #define PTE_BITS_IN_PD1	(PAGE_MASK | _PAGE_CACHEABLE | \
-			 _PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ | \
+			 _PAGE_U_EXECUTE | _PAGE_U_WRITE | _PAGE_U_READ | \
 			 _PAGE_K_EXECUTE | _PAGE_K_WRITE | _PAGE_K_READ)
 
 #ifndef __ASSEMBLY__

arch/arc/mm/cache_arc700.c

@@ -610,7 +610,7 @@ void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len)
 
 	local_irq_save(flags);
 	__ic_line_inv_vaddr(paddr, vaddr, len);
-	__dc_line_op(paddr, vaddr, len, OP_FLUSH);
+	__dc_line_op(paddr, vaddr, len, OP_FLUSH_N_INV);
 	local_irq_restore(flags);
 }
 
@@ -676,6 +676,17 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
 	flush_cache_all();
 }
 
+void flush_anon_page(struct vm_area_struct *vma, struct page *page,
+		     unsigned long u_vaddr)
+{
+	/* TBD: do we really need to clear the kernel mapping */
+	__flush_dcache_page(page_address(page), u_vaddr);
+	__flush_dcache_page(page_address(page), page_address(page));
+
+}
+
+#endif
+
 void copy_user_highpage(struct page *to, struct page *from,
 	unsigned long u_vaddr, struct vm_area_struct *vma)
 {
@@ -725,16 +736,6 @@ void clear_user_page(void *to, unsigned long u_vaddr, struct page *page)
 	set_bit(PG_arch_1, &page->flags);
 }
 
-void flush_anon_page(struct vm_area_struct *vma, struct page *page,
-		     unsigned long u_vaddr)
-{
-	/* TBD: do we really need to clear the kernel mapping */
-	__flush_dcache_page(page_address(page), u_vaddr);
-	__flush_dcache_page(page_address(page), page_address(page));
-
-}
-
-#endif
 
 /**********************************************************************
  * Explicit Cache flush request from user space via syscall

arch/arc/mm/tlb.c

@@ -444,7 +444,8 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned,
 	 *	       so userspace sees the right data.
 	 *  (Avoids the flush for Non-exec + congruent mapping case)
 	 */
-	if (vma->vm_flags & VM_EXEC || addr_not_cache_congruent(paddr, vaddr)) {
+	if ((vma->vm_flags & VM_EXEC) ||
+	     addr_not_cache_congruent(paddr, vaddr)) {
 		struct page *page = pfn_to_page(pte_pfn(*ptep));
 
 		int dirty = test_and_clear_bit(PG_arch_1, &page->flags);

arch/arc/mm/tlbex.S

@@ -277,7 +277,7 @@ ARC_ENTRY EV_TLBMissI
 	;----------------------------------------------------------------
 	; VERIFY_PTE: Check if PTE permissions approp for executing code
 	cmp_s   r2, VMALLOC_START
-	mov.lo  r2, (_PAGE_PRESENT | _PAGE_READ | _PAGE_EXECUTE)
+	mov.lo  r2, (_PAGE_PRESENT | _PAGE_U_READ | _PAGE_U_EXECUTE)
 	mov.hs  r2, (_PAGE_PRESENT | _PAGE_K_READ | _PAGE_K_EXECUTE)
 
 	and     r3, r0, r2  ; Mask out NON Flag bits from PTE
@@ -320,9 +320,9 @@ ARC_ENTRY EV_TLBMissD
 	mov_s   r2, 0
 	lr      r3, [ecr]
 	btst_s  r3, ECR_C_BIT_DTLB_LD_MISS	; Read Access
-	or.nz   r2, r2, _PAGE_READ      	; chk for Read flag in PTE
+	or.nz   r2, r2, _PAGE_U_READ      	; chk for Read flag in PTE
 	btst_s  r3, ECR_C_BIT_DTLB_ST_MISS	; Write Access
-	or.nz   r2, r2, _PAGE_WRITE     	; chk for Write flag in PTE
+	or.nz   r2, r2, _PAGE_U_WRITE     	; chk for Write flag in PTE
 	; Above laddering takes care of XCHG access
 	;   which is both Read and Write
 

arch/arc/plat-tb10x/tb10x.c

@@ -34,31 +34,6 @@ static void __init tb10x_platform_init(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-static void __init tb10x_platform_late_init(void)
-{
-	struct device_node *dn;
-
-	/*
-	 * Pinctrl documentation recommends setting up the iomux here for
-	 * all modules which don't require control over the pins themselves.
-	 * Modules which need this kind of assistance are compatible with
-	 * "abilis,simple-pinctrl", i.e. we can easily iterate over them.
-	 * TODO: Does this recommended method work cleanly with pins required
-	 * by modules?
-	 */
-	for_each_compatible_node(dn, NULL, "abilis,simple-pinctrl") {
-		struct platform_device *pd = of_find_device_by_node(dn);
-		struct pinctrl *pctl;
-
-		pctl = pinctrl_get_select(&pd->dev, "abilis,simple-default");
-		if (IS_ERR(pctl)) {
-			int ret = PTR_ERR(pctl);
-			dev_err(&pd->dev, "Could not set up pinctrl: %d\n",
-				ret);
-		}
-	}
-}
-
 static const char *tb10x_compat[] __initdata = {
 	"abilis,arc-tb10x",
 	NULL,
@@ -67,5 +42,4 @@ static const char *tb10x_compat[] __initdata = {
 MACHINE_START(TB10x, "tb10x")
 	.dt_compat	= tb10x_compat,
 	.init_machine	= tb10x_platform_init,
-	.init_late	= tb10x_platform_late_init,
 MACHINE_END

arch/arm/boot/dts/Makefile

@@ -177,7 +177,9 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
 	spear320-evb.dtb \
 	spear320-hmi.dtb
 dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
-dtb-$(CONFIG_ARCH_SUNXI) += sun4i-a10-cubieboard.dtb \
+dtb-$(CONFIG_ARCH_SUNXI) += \
+	sun4i-a10-cubieboard.dtb \
+	sun4i-a10-mini-xplus.dtb \
 	sun4i-a10-hackberry.dtb \
 	sun5i-a13-olinuxino.dtb
 dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \

arch/arm/boot/dts/armada-370-xp.dtsi

@@ -33,7 +33,8 @@
 		#size-cells = <1>;
 		compatible = "simple-bus";
 		interrupt-parent = <&mpic>;
-		ranges = <0 0 0xd0000000 0x100000>;
+		ranges = <0          0 0xd0000000 0x0100000 /* internal registers */
+			  0xe0000000 0 0xe0000000 0x8100000 /* PCIe */>;
 
 		internal-regs {
 			compatible = "simple-bus";

arch/arm/boot/dts/armada-370.dtsi

@@ -29,7 +29,8 @@
 	};
 
 	soc {
-		ranges = <0 0xd0000000 0x100000>;
+		ranges = <0          0xd0000000 0x0100000 /* internal registers */
+			  0xe0000000 0xe0000000 0x8100000 /* PCIe */>;
 		internal-regs {
 			system-controller@18200 {
 				compatible = "marvell,armada-370-xp-system-controller";
@@ -38,12 +39,12 @@
 
 			L2: l2-cache {
 				compatible = "marvell,aurora-outer-cache";
-				reg = <0xd0008000 0x1000>;
+				reg = <0x08000 0x1000>;
 				cache-id-part = <0x100>;
 				wt-override;
 			};
 
-			mpic: interrupt-controller@20000 {
+			interrupt-controller@20000 {
 				reg = <0x20a00 0x1d0>, <0x21870 0x58>;
 			};
 

arch/arm/boot/dts/armada-xp-gp.dts

@@ -39,6 +39,9 @@
 	};
 
 	soc {
+		ranges = <0          0 0xd0000000 0x100000
+			  0xf0000000 0 0xf0000000 0x1000000>;
+
 		internal-regs {
 			serial@12000 {
 				clock-frequency = <250000000>;

arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts

@@ -27,6 +27,9 @@
 	};
 
 	soc {
+		ranges = <0          0 0xd0000000 0x100000
+			  0xf0000000 0 0xf0000000 0x8000000>;
+
 		internal-regs {
 			serial@12000 {
 				clock-frequency = <250000000>;

arch/arm/boot/dts/armada-xp.dtsi

@@ -31,7 +31,7 @@
 				wt-override;
 			};
 
-			mpic: interrupt-controller@20000 {
+			interrupt-controller@20000 {
 			      reg = <0x20a00 0x2d0>, <0x21070 0x58>;
 			};
 

arch/arm/boot/dts/at91sam9260.dtsi

@@ -264,7 +264,7 @@
 						atmel,pins =
 							<0 10 0x2 0x0	/* PA10 periph B */
 							 0 11 0x2 0x0	/* PA11 periph B */
-							 0 24 0x2 0x0	/* PA24 periph B */
+							 0 22 0x2 0x0	/* PA22 periph B */
 							 0 25 0x2 0x0	/* PA25 periph B */
 							 0 26 0x2 0x0	/* PA26 periph B */
 							 0 27 0x2 0x0	/* PA27 periph B */

arch/arm/boot/dts/at91sam9n12.dtsi

@@ -57,6 +57,7 @@
 				compatible = "atmel,at91rm9200-aic";
 				interrupt-controller;
 				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <31>;
 			};
 
 			ramc0: ramc@ffffe800 {

arch/arm/boot/dts/at91sam9x25ek.dts

@@ -11,7 +11,7 @@
 /include/ "at91sam9x5ek.dtsi"
 
 / {
-	model = "Atmel AT91SAM9G25-EK";
+	model = "Atmel AT91SAM9X25-EK";
 	compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
 
 	ahb {

arch/arm/boot/dts/exynos5250.dtsi

@@ -497,6 +497,21 @@
 		clock-names = "usbhost";
 	};
 
+	usbphy@12130000 {
+		compatible = "samsung,exynos5250-usb2phy";
+		reg = <0x12130000 0x100>;
+		clocks = <&clock 1>, <&clock 285>;
+		clock-names = "ext_xtal", "usbhost";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		usbphy-sys {
+			reg = <0x10040704 0x8>,
+			      <0x10050230 0x4>;
+		};
+	};
+
 	amba {
 		#address-cells = <1>;
 		#size-cells = <1>;

arch/arm/boot/dts/omap3.dtsi

@@ -516,7 +516,7 @@
 		usb_otg_hs: usb_otg_hs@480ab000 {
 			compatible = "ti,omap3-musb";
 			reg = <0x480ab000 0x1000>;
-			interrupts = <0 92 0x4>, <0 93 0x4>;
+			interrupts = <92>, <93>;
 			interrupt-names = "mc", "dma";
 			ti,hwmods = "usb_otg_hs";
 			multipoint = <1>;

arch/arm/boot/dts/sama5d3.dtsi

@@ -75,11 +75,6 @@
 				compatible = "atmel,at91sam9x5-spi";
 				reg = <0xf0004000 0x100>;
 				interrupts = <24 4 3>;
-				cs-gpios = <&pioD 13 0
-					    &pioD 14 0 /* conflicts with SCK0 and CANRX0 */
-					    &pioD 15 0 /* conflicts with CTS0 and CANTX0 */
-					    &pioD 16 0 /* conflicts with RTS0 and PWMFI3 */
-					   >;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi0>;
 				status = "disabled";
@@ -156,7 +151,7 @@
 			};
 
 			macb0: ethernet@f0028000 {
-				compatible = "cnds,pc302-gem", "cdns,gem";
+				compatible = "cdns,pc302-gem", "cdns,gem";
 				reg = <0xf0028000 0x100>;
 				interrupts = <34 4 3>;
 				pinctrl-names = "default";
@@ -203,11 +198,6 @@
 				compatible = "atmel,at91sam9x5-spi";
 				reg = <0xf8008000 0x100>;
 				interrupts = <25 4 3>;
-				cs-gpios = <&pioC 25 0
-					    &pioC 26 0 /* conflitcs with TWD1 and ISI_D11 */
-					    &pioC 27 0 /* conflitcs with TWCK1 and ISI_D10 */
-					    &pioC 28 0 /* conflitcs with PWMFI0 and ISI_D9 */
-					   >;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi1>;
 				status = "disabled";

arch/arm/boot/dts/sama5d3xcm.dtsi

@@ -32,6 +32,10 @@
 
 	ahb {
 		apb {
+			spi0: spi@f0004000 {
+				cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
+			};
+
 			macb0: ethernet@f0028000 {
 				phy-mode = "rgmii";
 			};

arch/arm/boot/dts/ste-nomadik-s8815.dts

@@ -14,13 +14,19 @@
 		bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk";
 	};
 
+	/* This is where the interrupt is routed on the S8815 board */
+	external-bus@34000000 {
+		ethernet@300 {
+			interrupt-parent = <&gpio3>;
+			interrupts = <8 0x1>;
+		};
+	};
+
 	/* Custom board node with GPIO pins to active etc */
 	usb-s8815 {
 		/* The S8815 is using this very GPIO pin for the SMSC91x IRQs */
 		ethernet-gpio {
-			gpios = <&gpio3 19 0x1>;
-			interrupts = <19 0x1>;
-			interrupt-parent = <&gpio3>;
+			gpios = <&gpio3 8 0x1>;
 		};
 		/* This will bias the MMC/SD card detect line */
 		mmcsd-gpio {

arch/arm/boot/dts/sun4i-a10-mini-xplus.dts

@@ -22,8 +22,8 @@
 		bootargs = "earlyprintk console=ttyS0,115200";
 	};
 
-	soc {
-		uart0: uart@01c28000 {
+	soc@01c20000 {
+		uart0: serial@01c28000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart0_pins_a>;
 			status = "okay";

arch/arm/configs/exynos_defconfig

-CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BLK_DEV_INITRD=y
@@ -7,17 +7,18 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
-CONFIG_EFI_PARTITION=y
 CONFIG_ARCH_EXYNOS=y
-CONFIG_S3C_LOWLEVEL_UART_PORT=1
+CONFIG_S3C_LOWLEVEL_UART_PORT=3
 CONFIG_S3C24XX_PWM=y
 CONFIG_ARCH_EXYNOS5=y
 CONFIG_MACH_EXYNOS4_DT=y
-CONFIG_MACH_EXYNOS5_DT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"
@@ -30,35 +31,58 @@ CONFIG_NET_KEY=y
 CONFIG_INET=y
 CONFIG_RFKILL_REGULATOR=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_CRYPT=m
 CONFIG_NETDEVICES=y
 CONFIG_SMSC911X=y
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC75XX=y
 CONFIG_USB_NET_SMSC95XX=y
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
+CONFIG_KEYBOARD_CROS_EC=y
+# CONFIG_MOUSE_PS2 is not set
+CONFIG_MOUSE_CYAPA=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_SAMSUNG=y
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_HW_RANDOM=y
+CONFIG_TCG_TPM=y
+CONFIG_TCG_TIS_I2C_INFINEON=y
 CONFIG_I2C=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_ARB_GPIO_CHALLENGE=y
+CONFIG_I2C_S3C2410=y
+CONFIG_DEBUG_GPIO=y
 # CONFIG_HWMON is not set
+CONFIG_MFD_CROS_EC=y
+CONFIG_MFD_CROS_EC_I2C=y
+CONFIG_MFD_MAX77686=y
+CONFIG_MFD_MAX8997=y
+CONFIG_MFD_SEC_CORE=y
 CONFIG_MFD_TPS65090=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_MAX8997=y
+CONFIG_REGULATOR_MAX77686=y
+CONFIG_REGULATOR_S5M8767=y
 CONFIG_REGULATOR_TPS65090=y
 CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_SIMPLE=y
 CONFIG_EXYNOS_VIDEO=y
 CONFIG_EXYNOS_MIPI_DSI=y
 CONFIG_EXYNOS_DP=y
@@ -67,6 +91,20 @@ CONFIG_FONTS=y
 CONFIG_FONT_7x14=y
 CONFIG_LOGO=y
 CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_S5P=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_PHY=y
+CONFIG_SAMSUNG_USB2PHY=y
+CONFIG_SAMSUNG_USB3PHY=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_S3C=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_IDMAC=y
+CONFIG_MMC_DW_EXYNOS=y
+CONFIG_COMMON_CLK_MAX77686=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT4_FS=y
@@ -79,6 +117,7 @@ CONFIG_ROMFS_FS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
@@ -87,6 +126,5 @@ CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
+CONFIG_CRYPTO_SHA256=y
 CONFIG_CRC_CCITT=y

arch/arm/configs/omap2plus_defconfig

@@ -20,6 +20,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_MULTI_V6=y
 CONFIG_ARCH_OMAP2PLUS=y
 CONFIG_OMAP_RESET_CLOCKS=y
 CONFIG_OMAP_MUX_DEBUG=y

arch/arm/configs/tegra_defconfig

@@ -153,6 +153,7 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_MEDIA_USB_SUPPORT=y
 CONFIG_USB_VIDEO_CLASS=m
 CONFIG_DRM=y
+CONFIG_TEGRA_HOST1X=y
 CONFIG_DRM_TEGRA=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
@@ -202,7 +203,7 @@ CONFIG_TEGRA20_APB_DMA=y
 CONFIG_STAGING=y
 CONFIG_SENSORS_ISL29018=y
 CONFIG_SENSORS_ISL29028=y
-CONFIG_SENSORS_AK8975=y
+CONFIG_AK8975=y
 CONFIG_MFD_NVEC=y
 CONFIG_KEYBOARD_NVEC=y
 CONFIG_SERIO_NVEC_PS2=y

arch/arm/crypto/sha1-armv4-large.S

@@ -195,6 +195,7 @@ ENTRY(sha1_block_data_order)
 	add	r3,r3,r10			@ E+=F_00_19(B,C,D)
 	cmp	r14,sp
 	bne	.L_00_15		@ [((11+4)*5+2)*3]
+	sub	sp,sp,#25*4
 #if __ARM_ARCH__<7
 	ldrb	r10,[r1,#2]
 	ldrb	r9,[r1,#3]
@@ -290,7 +291,6 @@ ENTRY(sha1_block_data_order)
 	add	r3,r3,r10			@ E+=F_00_19(B,C,D)
 
 	ldr	r8,.LK_20_39		@ [+15+16*4]
-	sub	sp,sp,#25*4
 	cmn	sp,#0			@ [+3], clear carry to denote 20_39
 .L_20_39_or_60_79:
 	ldr	r9,[r14,#15*4]

arch/arm/include/debug/ux500.S

@@ -24,9 +24,9 @@
 #define U8500_UART0_PHYS_BASE	(0x80120000)
 #define U8500_UART1_PHYS_BASE	(0x80121000)
 #define U8500_UART2_PHYS_BASE	(0x80007000)
-#define U8500_UART0_VIRT_BASE	(0xa8120000)
-#define U8500_UART1_VIRT_BASE	(0xa8121000)
-#define U8500_UART2_VIRT_BASE	(0xa8007000)
+#define U8500_UART0_VIRT_BASE	(0xf8120000)
+#define U8500_UART1_VIRT_BASE	(0xf8121000)
+#define U8500_UART2_VIRT_BASE	(0xf8007000)
 #define __UX500_PHYS_UART(n)	U8500_UART##n##_PHYS_BASE
 #define __UX500_VIRT_UART(n)	U8500_UART##n##_VIRT_BASE
 #endif

arch/arm/kernel/process.c

@@ -411,7 +411,6 @@ static struct vm_area_struct gate_vma = {
 	.vm_start	= 0xffff0000,
 	.vm_end		= 0xffff0000 + PAGE_SIZE,
 	.vm_flags	= VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYEXEC,
-	.vm_mm		= &init_mm,
 };
 
 static int __init gate_vma_init(void)

arch/arm/kvm/arm.c

@@ -492,6 +492,11 @@ static void vcpu_pause(struct kvm_vcpu *vcpu)
 	wait_event_interruptible(*wq, !vcpu->arch.pause);
 }
 
+static int kvm_vcpu_initialized(struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.target >= 0;
+}
+
 /**
  * kvm_arch_vcpu_ioctl_run - the main VCPU run function to execute guest code
  * @vcpu:	The VCPU pointer
@@ -508,8 +513,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
 	int ret;
 	sigset_t sigsaved;
 
-	/* Make sure they initialize the vcpu with KVM_ARM_VCPU_INIT */
-	if (unlikely(vcpu->arch.target < 0))
+	if (unlikely(!kvm_vcpu_initialized(vcpu)))
 		return -ENOEXEC;
 
 	ret = kvm_vcpu_first_run_init(vcpu);
@@ -710,6 +714,10 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 	case KVM_SET_ONE_REG:
 	case KVM_GET_ONE_REG: {
 		struct kvm_one_reg reg;
+
+		if (unlikely(!kvm_vcpu_initialized(vcpu)))
+			return -ENOEXEC;
+
 		if (copy_from_user(&reg, argp, sizeof(reg)))
 			return -EFAULT;
 		if (ioctl == KVM_SET_ONE_REG)
@@ -722,6 +730,9 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 		struct kvm_reg_list reg_list;
 		unsigned n;
 
+		if (unlikely(!kvm_vcpu_initialized(vcpu)))
+			return -ENOEXEC;
+
 		if (copy_from_user(&reg_list, user_list, sizeof(reg_list)))
 			return -EFAULT;
 		n = reg_list.n;

arch/arm/kvm/mmu.c

@@ -43,7 +43,14 @@ static phys_addr_t hyp_idmap_vector;
 
 static void kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
 {
-	kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, kvm, ipa);
+	/*
+	 * This function also gets called when dealing with HYP page
+	 * tables. As HYP doesn't have an associated struct kvm (and
+	 * the HYP page tables are fairly static), we don't do
+	 * anything there.
+	 */
+	if (kvm)
+		kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, kvm, ipa);
 }
 
 static int mmu_topup_memory_cache(struct kvm_mmu_memory_cache *cache,
@@ -78,18 +85,20 @@ static void *mmu_memory_cache_alloc(struct kvm_mmu_memory_cache *mc)
 	return p;
 }
 
-static void clear_pud_entry(pud_t *pud)
+static void clear_pud_entry(struct kvm *kvm, pud_t *pud, phys_addr_t addr)
 {
 	pmd_t *pmd_table = pmd_offset(pud, 0);
 	pud_clear(pud);
+	kvm_tlb_flush_vmid_ipa(kvm, addr);
 	pmd_free(NULL, pmd_table);
 	put_page(virt_to_page(pud));
 }
 
-static void clear_pmd_entry(pmd_t *pmd)
+static void clear_pmd_entry(struct kvm *kvm, pmd_t *pmd, phys_addr_t addr)
 {
 	pte_t *pte_table = pte_offset_kernel(pmd, 0);
 	pmd_clear(pmd);
+	kvm_tlb_flush_vmid_ipa(kvm, addr);
 	pte_free_kernel(NULL, pte_table);
 	put_page(virt_to_page(pmd));
 }
@@ -100,11 +109,12 @@ static bool pmd_empty(pmd_t *pmd)
 	return page_count(pmd_page) == 1;
 }
 
-static void clear_pte_entry(pte_t *pte)
+static void clear_pte_entry(struct kvm *kvm, pte_t *pte, phys_addr_t addr)
 {
 	if (pte_present(*pte)) {
 		kvm_set_pte(pte, __pte(0));
 		put_page(virt_to_page(pte));
+		kvm_tlb_flush_vmid_ipa(kvm, addr);
 	}
 }
 
@@ -114,7 +124,8 @@ static bool pte_empty(pte_t *pte)
 	return page_count(pte_page) == 1;
 }
 
-static void unmap_range(pgd_t *pgdp, unsigned long long start, u64 size)
+static void unmap_range(struct kvm *kvm, pgd_t *pgdp,
+			unsigned long long start, u64 size)
 {
 	pgd_t *pgd;
 	pud_t *pud;
@@ -138,15 +149,15 @@ static void unmap_range(pgd_t *pgdp, unsigned long long start, u64 size)
 		}
 
 		pte = pte_offset_kernel(pmd, addr);
-		clear_pte_entry(pte);
+		clear_pte_entry(kvm, pte, addr);
 		range = PAGE_SIZE;
 
 		/* If we emptied the pte, walk back up the ladder */
 		if (pte_empty(pte)) {
-			clear_pmd_entry(pmd);
+			clear_pmd_entry(kvm, pmd, addr);
 			range = PMD_SIZE;
 			if (pmd_empty(pmd)) {
-				clear_pud_entry(pud);
+				clear_pud_entry(kvm, pud, addr);
 				range = PUD_SIZE;
 			}
 		}
@@ -165,14 +176,14 @@ void free_boot_hyp_pgd(void)
 	mutex_lock(&kvm_hyp_pgd_mutex);
 
 	if (boot_hyp_pgd) {
-		unmap_range(boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE);
-		unmap_range(boot_hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE);
+		unmap_range(NULL, boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE);
+		unmap_range(NULL, boot_hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE);
 		kfree(boot_hyp_pgd);
 		boot_hyp_pgd = NULL;
 	}
 
 	if (hyp_pgd)
-		unmap_range(hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE);
+		unmap_range(NULL, hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE);
 
 	kfree(init_bounce_page);
 	init_bounce_page = NULL;
@@ -200,9 +211,10 @@ void free_hyp_pgds(void)
 
 	if (hyp_pgd) {
 		for (addr = PAGE_OFFSET; virt_addr_valid(addr); addr += PGDIR_SIZE)
-			unmap_range(hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE);
+			unmap_range(NULL, hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE);
 		for (addr = VMALLOC_START; is_vmalloc_addr((void*)addr); addr += PGDIR_SIZE)
-			unmap_range(hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE);
+			unmap_range(NULL, hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE);
+
 		kfree(hyp_pgd);
 		hyp_pgd = NULL;
 	}
@@ -393,7 +405,7 @@ int kvm_alloc_stage2_pgd(struct kvm *kvm)
  */
 static void unmap_stage2_range(struct kvm *kvm, phys_addr_t start, u64 size)
 {
-	unmap_range(kvm->arch.pgd, start, size);
+	unmap_range(kvm, kvm->arch.pgd, start, size);
 }
 
 /**
@@ -675,7 +687,6 @@ static void handle_hva_to_gpa(struct kvm *kvm,
 static void kvm_unmap_hva_handler(struct kvm *kvm, gpa_t gpa, void *data)
 {
 	unmap_stage2_range(kvm, gpa, PAGE_SIZE);
-	kvm_tlb_flush_vmid_ipa(kvm, gpa);
 }
 
 int kvm_unmap_hva(struct kvm *kvm, unsigned long hva)

arch/arm/mach-at91/at91rm9200_time.c

@@ -174,6 +174,7 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
 static struct clock_event_device clkevt = {
 	.name		= "at91_tick",
 	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.shift		= 32,
 	.rating		= 150,
 	.set_next_event	= clkevt32k_next_event,
 	.set_mode	= clkevt32k_mode,
@@ -264,9 +265,11 @@ void __init at91rm9200_timer_init(void)
 	at91_st_write(AT91_ST_RTMR, 1);
 
 	/* Setup timer clockevent, with minimum of two ticks (important!!) */
+	clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift);
+	clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt);
+	clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1;
 	clkevt.cpumask = cpumask_of(0);
-	clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK,
-					2, AT91_ST_ALMV);
+	clockevents_register_device(&clkevt);
 
 	/* register clocksource */
 	clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK);

arch/arm/mach-at91/at91sam9n12.c

@@ -223,13 +223,7 @@ static void __init at91sam9n12_map_io(void)
 	at91_init_sram(0, AT91SAM9N12_SRAM_BASE, AT91SAM9N12_SRAM_SIZE);
 }
 
-void __init at91sam9n12_initialize(void)
-{
-	at91_extern_irq = (1 << AT91SAM9N12_ID_IRQ0);
-}
-
 AT91_SOC_START(at91sam9n12)
 	.map_io = at91sam9n12_map_io,
 	.register_clocks = at91sam9n12_register_clocks,
-	.init = at91sam9n12_initialize,
 AT91_SOC_END

arch/arm/mach-at91/include/mach/at91_pmc.h

@@ -179,9 +179,9 @@ extern void __iomem *at91_pmc_base;
 #define		AT91_PMC_PCR_CMD	(0x1  <<  12)		/* Command (read=0, write=1) */
 #define		AT91_PMC_PCR_DIV(n)	((n)  <<  16)		/* Divisor Value */
 #define			AT91_PMC_PCR_DIV0	0x0			/* Peripheral clock is MCK */
-#define			AT91_PMC_PCR_DIV2	0x2			/* Peripheral clock is MCK/2 */
-#define			AT91_PMC_PCR_DIV4	0x4			/* Peripheral clock is MCK/4 */
-#define			AT91_PMC_PCR_DIV8	0x8			/* Peripheral clock is MCK/8 */
+#define			AT91_PMC_PCR_DIV2	0x1			/* Peripheral clock is MCK/2 */
+#define			AT91_PMC_PCR_DIV4	0x2			/* Peripheral clock is MCK/4 */
+#define			AT91_PMC_PCR_DIV8	0x3			/* Peripheral clock is MCK/8 */
 #define		AT91_PMC_PCR_EN		(0x1  <<  28)		/* Enable */
 
 #endif

arch/arm/mach-exynos/Kconfig

@@ -250,6 +250,7 @@ config MACH_ARMLEX4210
 config MACH_UNIVERSAL_C210
 	bool "Mobile UNIVERSAL_C210 Board"
 	select CLKSRC_MMIO
+	select CLKSRC_SAMSUNG_PWM
 	select CPU_EXYNOS4210
 	select EXYNOS4_SETUP_FIMC
 	select EXYNOS4_SETUP_FIMD0
@@ -281,7 +282,6 @@ config MACH_UNIVERSAL_C210
 	select S5P_DEV_TV
 	select S5P_GPIO_INT
 	select S5P_SETUP_MIPIPHY
-	select SAMSUNG_HRT
 	help
 	  Machine support for Samsung Mobile Universal S5PC210 Reference
 	  Board.
@@ -410,6 +410,7 @@ config MACH_EXYNOS4_DT
 	depends on ARCH_EXYNOS4
 	select ARM_AMBA
 	select CLKSRC_OF
+	select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210
 	select CPU_EXYNOS4210
 	select KEYBOARD_SAMSUNG if INPUT_KEYBOARD
 	select PINCTRL

arch/arm/mach-exynos/common.c

@@ -10,12 +10,14 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/bitops.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/irqchip.h>
 #include <linux/io.h>
 #include <linux/device.h>
 #include <linux/gpio.h>
+#include <clocksource/samsung_pwm.h>
 #include <linux/sched.h>
 #include <linux/serial_core.h>
 #include <linux/of.h>
@@ -302,6 +304,13 @@ static struct map_desc exynos5440_iodesc0[] __initdata = {
 	},
 };
 
+static struct samsung_pwm_variant exynos4_pwm_variant = {
+	.bits		= 32,
+	.div_base	= 0,
+	.has_tint_cstat	= true,
+	.tclk_mask	= 0,
+};
+
 void exynos4_restart(char mode, const char *cmd)
 {
 	__raw_writel(0x1, S5P_SWRESET);
@@ -317,9 +326,16 @@ void exynos5_restart(char mode, const char *cmd)
 		val = 0x1;
 		addr = EXYNOS_SWRESET;
 	} else if (of_machine_is_compatible("samsung,exynos5440")) {
+		u32 status;
 		np = of_find_compatible_node(NULL, NULL, "samsung,exynos5440-clock");
+
+		addr = of_iomap(np, 0) + 0xbc;
+		status = __raw_readl(addr);
+
 		addr = of_iomap(np, 0) + 0xcc;
-		val = (0xfff << 20) | (0x1 << 16);
+		val = __raw_readl(addr);
+
+		val = (val & 0xffff0000) | (status & 0xffff);
 	} else {
 		pr_err("%s: cannot support non-DT\n", __func__);
 		return;
@@ -442,8 +458,20 @@ static void __init exynos5440_map_io(void)
 	iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0));
 }
 
+void __init exynos_set_timer_source(u8 channels)
+{
+	exynos4_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+	exynos4_pwm_variant.output_mask &= ~channels;
+}
+
 void __init exynos_init_time(void)
 {
+	unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
+		EXYNOS4_IRQ_TIMER0_VIC, EXYNOS4_IRQ_TIMER1_VIC,
+		EXYNOS4_IRQ_TIMER2_VIC, EXYNOS4_IRQ_TIMER3_VIC,
+		EXYNOS4_IRQ_TIMER4_VIC,
+	};
+
 	if (of_have_populated_dt()) {
 #ifdef CONFIG_OF
 		of_clk_init(NULL);
@@ -455,7 +483,14 @@ void __init exynos_init_time(void)
 		exynos4_clk_init(NULL, !soc_is_exynos4210(), S5P_VA_CMU, readl(S5P_VA_CHIPID + 8) & 1);
 		exynos4_clk_register_fixed_ext(xxti_f, xusbxti_f);
 #endif
-		mct_init(S5P_VA_SYSTIMER, EXYNOS4_IRQ_MCT_G0, EXYNOS4_IRQ_MCT_L0, EXYNOS4_IRQ_MCT_L1);
+#ifdef CONFIG_CLKSRC_SAMSUNG_PWM
+		if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
+			samsung_pwm_clocksource_init(S3C_VA_TIMER,
+					timer_irqs, &exynos4_pwm_variant);
+		else
+#endif
+			mct_init(S5P_VA_SYSTIMER, EXYNOS4_IRQ_MCT_G0,
+					EXYNOS4_IRQ_MCT_L0, EXYNOS4_IRQ_MCT_L1);
 	}
 }
 

arch/arm/mach-exynos/common.h

@@ -32,6 +32,8 @@ void exynos4_clk_register_fixed_ext(unsigned long, unsigned long);
 
 void exynos_firmware_init(void);
 
+void exynos_set_timer_source(u8 channels);
+
 #ifdef CONFIG_PM_GENERIC_DOMAINS
 int exynos_pm_late_initcall(void);
 #else

arch/arm/mach-exynos/include/mach/pm-core.h

@@ -18,8 +18,15 @@
 #ifndef __ASM_ARCH_PM_CORE_H
 #define __ASM_ARCH_PM_CORE_H __FILE__
 
+#include <linux/of.h>
 #include <mach/regs-pmu.h>
 
+#ifdef CONFIG_PINCTRL_EXYNOS
+extern u32 exynos_get_eint_wake_mask(void);
+#else
+static inline u32 exynos_get_eint_wake_mask(void) { return 0xffffffff; }
+#endif
+
 static inline void s3c_pm_debug_init_uart(void)
 {
 	/* nothing here yet */
@@ -27,7 +34,12 @@ static inline void s3c_pm_debug_init_uart(void)
 
 static inline void s3c_pm_arch_prepare_irqs(void)
 {
-	__raw_writel(s3c_irqwake_eintmask, S5P_EINT_WAKEUP_MASK);
+	u32 eintmask = s3c_irqwake_eintmask;
+
+	if (of_have_populated_dt())
+		eintmask = exynos_get_eint_wake_mask();
+
+	__raw_writel(eintmask, S5P_EINT_WAKEUP_MASK);
 	__raw_writel(s3c_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK);
 }
 

arch/arm/mach-exynos/mach-universal_c210.c

@@ -41,7 +41,6 @@
 #include <plat/mfc.h>
 #include <plat/sdhci.h>
 #include <plat/fimc-core.h>
-#include <plat/samsung-time.h>
 #include <plat/camport.h>
 
 #include <mach/map.h>
@@ -1094,7 +1093,7 @@ static void __init universal_map_io(void)
 {
 	exynos_init_io(NULL, 0);
 	s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
-	samsung_set_timer_source(SAMSUNG_PWM2, SAMSUNG_PWM4);
+	exynos_set_timer_source(BIT(2) | BIT(4));
 	xxti_f = 0;
 	xusbxti_f = 24000000;
 }
@@ -1154,7 +1153,7 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
 	.map_io		= universal_map_io,
 	.init_machine	= universal_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= samsung_timer_init,
+	.init_time	= exynos_init_time,
 	.reserve        = &universal_reserve,
 	.restart	= exynos4_restart,
 MACHINE_END

arch/arm/mach-imx/clk-imx6q.c

@@ -177,7 +177,8 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
 static const char *step_sels[]	= { "osc", "pll2_pfd2_396m", };
 static const char *pll1_sw_sels[]	= { "pll1_sys", "step", };
 static const char *periph_pre_sels[]	= { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", };
-static const char *periph_clk2_sels[]	= { "pll3_usb_otg", "osc", };
+static const char *periph_clk2_sels[]	= { "pll3_usb_otg", "osc", "osc", "dummy", };
+static const char *periph2_clk2_sels[]	= { "pll3_usb_otg", "pll2_bus", };
 static const char *periph_sels[]	= { "periph_pre", "periph_clk2", };
 static const char *periph2_sels[]	= { "periph2_pre", "periph2_clk2", };
 static const char *axi_sels[]		= { "periph", "pll2_pfd2_396m", "pll3_pfd1_540m", };
@@ -185,7 +186,7 @@ static const char *audio_sels[]	= { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd
 static const char *gpu_axi_sels[]	= { "axi", "ahb", };
 static const char *gpu2d_core_sels[]	= { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", };
 static const char *gpu3d_core_sels[]	= { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", };
-static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", };
+static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll3_pfd0_720m", };
 static const char *ipu_sels[]		= { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
 static const char *ldb_di_sels[]	= { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", };
 static const char *ipu_di_pre_sels[]	= { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", };
@@ -369,8 +370,8 @@ int __init mx6q_clocks_init(void)
 	clk[pll1_sw]          = imx_clk_mux("pll1_sw",	        base + 0xc,  2,  1, pll1_sw_sels,      ARRAY_SIZE(pll1_sw_sels));
 	clk[periph_pre]       = imx_clk_mux("periph_pre",       base + 0x18, 18, 2, periph_pre_sels,   ARRAY_SIZE(periph_pre_sels));
 	clk[periph2_pre]      = imx_clk_mux("periph2_pre",      base + 0x18, 21, 2, periph_pre_sels,   ARRAY_SIZE(periph_pre_sels));
-	clk[periph_clk2_sel]  = imx_clk_mux("periph_clk2_sel",  base + 0x18, 12, 1, periph_clk2_sels,  ARRAY_SIZE(periph_clk2_sels));
-	clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph_clk2_sels,  ARRAY_SIZE(periph_clk2_sels));
+	clk[periph_clk2_sel]  = imx_clk_mux("periph_clk2_sel",  base + 0x18, 12, 2, periph_clk2_sels,  ARRAY_SIZE(periph_clk2_sels));
+	clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels));
 	clk[axi_sel]          = imx_clk_mux("axi_sel",          base + 0x14, 6,  2, axi_sels,          ARRAY_SIZE(axi_sels));
 	clk[esai_sel]         = imx_clk_mux("esai_sel",         base + 0x20, 19, 2, audio_sels,        ARRAY_SIZE(audio_sels));
 	clk[asrc_sel]         = imx_clk_mux("asrc_sel",         base + 0x30, 7,  2, audio_sels,        ARRAY_SIZE(audio_sels));
@@ -498,7 +499,7 @@ int __init mx6q_clocks_init(void)
 	clk[ldb_di1]      = imx_clk_gate2("ldb_di1",       "ldb_di1_podf",      base + 0x74, 14);
 	clk[ipu2_di1]     = imx_clk_gate2("ipu2_di1",      "ipu2_di1_sel",      base + 0x74, 10);
 	clk[hsi_tx]       = imx_clk_gate2("hsi_tx",        "hsi_tx_podf",       base + 0x74, 16);
-	clk[mlb]          = imx_clk_gate2("mlb",           "pll8_mlb",          base + 0x74, 18);
+	clk[mlb]          = imx_clk_gate2("mlb",           "axi",               base + 0x74, 18);
 	clk[mmdc_ch0_axi] = imx_clk_gate2("mmdc_ch0_axi",  "mmdc_ch0_axi_podf", base + 0x74, 20);
 	clk[mmdc_ch1_axi] = imx_clk_gate2("mmdc_ch1_axi",  "mmdc_ch1_axi_podf", base + 0x74, 22);
 	clk[ocram]        = imx_clk_gate2("ocram",         "ahb",               base + 0x74, 28);

arch/arm/mach-imx/headsmp.S

@@ -18,8 +18,20 @@
 	.section ".text.head", "ax"
 
 #ifdef CONFIG_SMP
+diag_reg_offset:
+	.word	g_diag_reg - .
+
+	.macro	set_diag_reg
+	adr	r0, diag_reg_offset
+	ldr	r1, [r0]
+	add	r1, r1, r0		@ r1 = physical &g_diag_reg
+	ldr	r0, [r1]
+	mcr	p15, 0, r0, c15, c0, 1	@ write diagnostic register
+	.endm
+
 ENTRY(v7_secondary_startup)
 	bl	v7_invalidate_l1
+	set_diag_reg
 	b	secondary_startup
 ENDPROC(v7_secondary_startup)
 #endif

arch/arm/mach-imx/platsmp.c

@@ -12,6 +12,7 @@
 
 #include <linux/init.h>
 #include <linux/smp.h>
+#include <asm/cacheflush.h>
 #include <asm/page.h>
 #include <asm/smp_scu.h>
 #include <asm/mach/map.h>
@@ -21,6 +22,7 @@
 
 #define SCU_STANDBY_ENABLE	(1 << 5)
 
+u32 g_diag_reg;
 static void __iomem *scu_base;
 
 static struct map_desc scu_io_desc __initdata = {
@@ -80,6 +82,18 @@ void imx_smp_prepare(void)
 static void __init imx_smp_prepare_cpus(unsigned int max_cpus)
 {
 	imx_smp_prepare();
+
+	/*
+	 * The diagnostic register holds the errata bits.  Mostly bootloader
+	 * does not bring up secondary cores, so that when errata bits are set
+	 * in bootloader, they are set only for boot cpu.  But on a SMP
+	 * configuration, it should be equally done on every single core.
+	 * Read the register from boot cpu here, and will replicate it into
+	 * secondary cores when booting them.
+	 */
+	asm("mrc p15, 0, %0, c15, c0, 1" : "=r" (g_diag_reg) : : "cc");
+	__cpuc_flush_dcache_area(&g_diag_reg, sizeof(g_diag_reg));
+	outer_clean_range(__pa(&g_diag_reg), __pa(&g_diag_reg + 1));
 }
 
 struct smp_operations  imx_smp_ops __initdata = {

arch/arm/mach-kirkwood/common.c

@@ -528,12 +528,6 @@ void __init kirkwood_init_early(void)
 {
 	orion_time_set_base(TIMER_VIRT_BASE);
 
-	/*
-	 * Some Kirkwood devices allocate their coherent buffers from atomic
-	 * context. Increase size of atomic coherent pool to make sure such
-	 * the allocations won't fail.
-	 */
-	init_dma_coherent_pool_size(SZ_1M);
 	mvebu_mbus_init("marvell,kirkwood-mbus",
 			BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
 			DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ);

arch/arm/mach-kirkwood/ts219-setup.c

@@ -124,7 +124,7 @@ static void __init qnap_ts219_init(void)
 static int __init ts219_pci_init(void)
 {
 	if (machine_is_ts219())
-		kirkwood_pcie_init(KW_PCIE0);
+		kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
 
 	return 0;
 }

arch/arm/mach-mvebu/Kconfig

@@ -15,6 +15,7 @@ config ARCH_MVEBU
 	select MVEBU_CLK_GATING
 	select MVEBU_MBUS
 	select ZONE_DMA if ARM_LPAE
+	select ARCH_REQUIRE_GPIOLIB
 
 if ARCH_MVEBU
 

arch/arm/mach-mvebu/armada-370-xp.c

@@ -53,13 +53,6 @@ void __init armada_370_xp_init_early(void)
 {
 	char *mbus_soc_name;
 
-	/*
-	 * Some Armada 370/XP devices allocate their coherent buffers
-	 * from atomic context. Increase size of atomic coherent pool
-	 * to make sure such the allocations won't fail.
-	 */
-	init_dma_coherent_pool_size(SZ_1M);
-
 	/*
 	 * This initialization will be replaced by a DT-based
 	 * initialization once the mvebu-mbus driver gains DT support.

arch/arm/mach-omap1/dma.c

@@ -345,6 +345,7 @@ static int __init omap1_system_dma_init(void)
 		dev_err(&pdev->dev,
 			"%s: Memory allocation failed for d->chan!\n",
 			__func__);
+		ret = -ENOMEM;
 		goto exit_release_d;
 	}
 

arch/arm/mach-omap2/cclock33xx_data.c

@@ -454,9 +454,29 @@ DEFINE_CLK_GATE(cefuse_fck, "sys_clkin_ck", &sys_clkin_ck, 0x0,
  */
 DEFINE_CLK_FIXED_FACTOR(clkdiv32k_ck, "clk_24mhz", &clk_24mhz, 0x0, 1, 732);
 
-DEFINE_CLK_GATE(clkdiv32k_ick, "clkdiv32k_ck", &clkdiv32k_ck, 0x0,
-		AM33XX_CM_PER_CLKDIV32K_CLKCTRL, AM33XX_MODULEMODE_SWCTRL_SHIFT,
-		0x0, NULL);
+static struct clk clkdiv32k_ick;
+
+static const char *clkdiv32k_ick_parent_names[] = {
+	"clkdiv32k_ck",
+};
+
+static const struct clk_ops clkdiv32k_ick_ops = {
+	.enable         = &omap2_dflt_clk_enable,
+	.disable        = &omap2_dflt_clk_disable,
+	.is_enabled     = &omap2_dflt_clk_is_enabled,
+	.init           = &omap2_init_clk_clkdm,
+};
+
+static struct clk_hw_omap clkdiv32k_ick_hw = {
+	.hw	= {
+		.clk	= &clkdiv32k_ick,
+	},
+	.enable_reg	= AM33XX_CM_PER_CLKDIV32K_CLKCTRL,
+	.enable_bit	= AM33XX_MODULEMODE_SWCTRL_SHIFT,
+	.clkdm_name	= "clk_24mhz_clkdm",
+};
+
+DEFINE_STRUCT_CLK(clkdiv32k_ick, clkdiv32k_ick_parent_names, clkdiv32k_ick_ops);
 
 /* "usbotg_fck" is an additional clock and not really a modulemode */
 DEFINE_CLK_GATE(usbotg_fck, "dpll_per_ck", &dpll_per_ck, 0x0,

arch/arm/mach-omap2/omap_hwmod.c

@@ -1356,13 +1356,27 @@ static void _enable_sysc(struct omap_hwmod *oh)
 
 	clkdm = _get_clkdm(oh);
 	if (sf & SYSC_HAS_SIDLEMODE) {
+		if (oh->flags & HWMOD_SWSUP_SIDLE ||
+		    oh->flags & HWMOD_SWSUP_SIDLE_ACT) {
+			idlemode = HWMOD_IDLEMODE_NO;
+		} else {
+			if (sf & SYSC_HAS_ENAWAKEUP)
+				_enable_wakeup(oh, &v);
+			if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
+				idlemode = HWMOD_IDLEMODE_SMART_WKUP;
+			else
+				idlemode = HWMOD_IDLEMODE_SMART;
+		}
+
+		/*
+		 * This is special handling for some IPs like
+		 * 32k sync timer. Force them to idle!
+		 */
 		clkdm_act = (clkdm && clkdm->flags & CLKDM_ACTIVE_WITH_MPU);
 		if (clkdm_act && !(oh->class->sysc->idlemodes &
 				   (SIDLE_SMART | SIDLE_SMART_WKUP)))
 			idlemode = HWMOD_IDLEMODE_FORCE;
-		else
-			idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
-				HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
+
 		_set_slave_idlemode(oh, idlemode, &v);
 	}
 
@@ -1391,10 +1405,6 @@ static void _enable_sysc(struct omap_hwmod *oh)
 	    (sf & SYSC_HAS_CLOCKACTIVITY))
 		_set_clockactivity(oh, oh->class->sysc->clockact, &v);
 
-	/* If slave is in SMARTIDLE, also enable wakeup */
-	if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE))
-		_enable_wakeup(oh, &v);
-
 	_write_sysconfig(v, oh);
 
 	/*
@@ -1430,13 +1440,16 @@ static void _idle_sysc(struct omap_hwmod *oh)
 	sf = oh->class->sysc->sysc_flags;
 
 	if (sf & SYSC_HAS_SIDLEMODE) {
-		/* XXX What about HWMOD_IDLEMODE_SMART_WKUP? */
-		if (oh->flags & HWMOD_SWSUP_SIDLE ||
-		    !(oh->class->sysc->idlemodes &
-		      (SIDLE_SMART | SIDLE_SMART_WKUP)))
+		if (oh->flags & HWMOD_SWSUP_SIDLE) {
 			idlemode = HWMOD_IDLEMODE_FORCE;
-		else
-			idlemode = HWMOD_IDLEMODE_SMART;
+		} else {
+			if (sf & SYSC_HAS_ENAWAKEUP)
+				_enable_wakeup(oh, &v);
+			if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
+				idlemode = HWMOD_IDLEMODE_SMART_WKUP;
+			else
+				idlemode = HWMOD_IDLEMODE_SMART;
+		}
 		_set_slave_idlemode(oh, idlemode, &v);
 	}
 
@@ -1455,10 +1468,6 @@ static void _idle_sysc(struct omap_hwmod *oh)
 		_set_master_standbymode(oh, idlemode, &v);
 	}
 
-	/* If slave is in SMARTIDLE, also enable wakeup */
-	if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE))
-		_enable_wakeup(oh, &v);
-
 	_write_sysconfig(v, oh);
 }
 
@@ -2065,7 +2074,7 @@ static int _omap4_get_context_lost(struct omap_hwmod *oh)
  * do so is present in the hwmod data, then call it and pass along the
  * return value; otherwise, return 0.
  */
-static int __init _enable_preprogram(struct omap_hwmod *oh)
+static int _enable_preprogram(struct omap_hwmod *oh)
 {
 	if (!oh->class->enable_preprogram)
 		return 0;
@@ -2245,42 +2254,6 @@ static int _idle(struct omap_hwmod *oh)
 	return 0;
 }
 
-/**
- * omap_hwmod_set_ocp_autoidle - set the hwmod's OCP autoidle bit
- * @oh: struct omap_hwmod *
- * @autoidle: desired AUTOIDLE bitfield value (0 or 1)
- *
- * Sets the IP block's OCP autoidle bit in hardware, and updates our
- * local copy. Intended to be used by drivers that require
- * direct manipulation of the AUTOIDLE bits.
- * Returns -EINVAL if @oh is null or is not in the ENABLED state, or passes
- * along the return value from _set_module_autoidle().
- *
- * Any users of this function should be scrutinized carefully.
- */
-int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle)
-{
-	u32 v;
-	int retval = 0;
-	unsigned long flags;
-
-	if (!oh || oh->_state != _HWMOD_STATE_ENABLED)
-		return -EINVAL;
-
-	spin_lock_irqsave(&oh->_lock, flags);
-
-	v = oh->_sysc_cache;
-
-	retval = _set_module_autoidle(oh, autoidle, &v);
-
-	if (!retval)
-		_write_sysconfig(v, oh);
-
-	spin_unlock_irqrestore(&oh->_lock, flags);
-
-	return retval;
-}
-
 /**
  * _shutdown - shutdown an omap_hwmod
  * @oh: struct omap_hwmod *
@@ -3179,38 +3152,6 @@ int omap_hwmod_softreset(struct omap_hwmod *oh)
 	return ret;
 }
 
-/**
- * omap_hwmod_set_slave_idlemode - set the hwmod's OCP slave idlemode
- * @oh: struct omap_hwmod *
- * @idlemode: SIDLEMODE field bits (shifted to bit 0)
- *
- * Sets the IP block's OCP slave idlemode in hardware, and updates our
- * local copy.  Intended to be used by drivers that have some erratum
- * that requires direct manipulation of the SIDLEMODE bits.  Returns
- * -EINVAL if @oh is null, or passes along the return value from
- * _set_slave_idlemode().
- *
- * XXX Does this function have any current users?  If not, we should
- * remove it; it is better to let the rest of the hwmod code handle this.
- * Any users of this function should be scrutinized carefully.
- */
-int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode)
-{
-	u32 v;
-	int retval = 0;
-
-	if (!oh)
-		return -EINVAL;
-
-	v = oh->_sysc_cache;
-
-	retval = _set_slave_idlemode(oh, idlemode, &v);
-	if (!retval)
-		_write_sysconfig(v, oh);
-
-	return retval;
-}
-
 /**
  * omap_hwmod_lookup - look up a registered omap_hwmod by name
  * @name: name of the omap_hwmod to look up

arch/arm/mach-omap2/omap_hwmod.h

@@ -463,6 +463,9 @@ struct omap_hwmod_omap4_prcm {
  *     is kept in force-standby mode. Failing to do so causes PM problems
  *     with musb on OMAP3630 at least. Note that musb has a dedicated register
  *     to control MSTANDBY signal when MIDLEMODE is set to force-standby.
+ * HWMOD_SWSUP_SIDLE_ACT: omap_hwmod code should manually bring the module
+ *     out of idle, but rely on smart-idle to the put it back in idle,
+ *     so the wakeups are still functional (Only known case for now is UART)
  */
 #define HWMOD_SWSUP_SIDLE			(1 << 0)
 #define HWMOD_SWSUP_MSTANDBY			(1 << 1)
@@ -476,6 +479,7 @@ struct omap_hwmod_omap4_prcm {
 #define HWMOD_EXT_OPT_MAIN_CLK			(1 << 9)
 #define HWMOD_BLOCK_WFI				(1 << 10)
 #define HWMOD_FORCE_MSTANDBY			(1 << 11)
+#define HWMOD_SWSUP_SIDLE_ACT			(1 << 12)
 
 /*
  * omap_hwmod._int_flags definitions
@@ -641,9 +645,6 @@ int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name);
 int omap_hwmod_enable_clocks(struct omap_hwmod *oh);
 int omap_hwmod_disable_clocks(struct omap_hwmod *oh);
 
-int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode);
-int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle);
-
 int omap_hwmod_reset(struct omap_hwmod *oh);
 void omap_hwmod_ocp_barrier(struct omap_hwmod *oh);
 

arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c

@@ -512,6 +512,7 @@ struct omap_hwmod omap2xxx_uart1_hwmod = {
 	.mpu_irqs	= omap2_uart1_mpu_irqs,
 	.sdma_reqs	= omap2_uart1_sdma_reqs,
 	.main_clk	= "uart1_fck",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = CORE_MOD,
@@ -531,6 +532,7 @@ struct omap_hwmod omap2xxx_uart2_hwmod = {
 	.mpu_irqs	= omap2_uart2_mpu_irqs,
 	.sdma_reqs	= omap2_uart2_sdma_reqs,
 	.main_clk	= "uart2_fck",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = CORE_MOD,
@@ -550,6 +552,7 @@ struct omap_hwmod omap2xxx_uart3_hwmod = {
 	.mpu_irqs	= omap2_uart3_mpu_irqs,
 	.sdma_reqs	= omap2_uart3_sdma_reqs,
 	.main_clk	= "uart3_fck",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = CORE_MOD,

arch/arm/mach-omap2/omap_hwmod_33xx_data.c

@@ -1995,6 +1995,7 @@ static struct omap_hwmod am33xx_uart1_hwmod = {
 	.name		= "uart1",
 	.class		= &uart_class,
 	.clkdm_name	= "l4_wkup_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.mpu_irqs	= am33xx_uart1_irqs,
 	.sdma_reqs	= uart1_edma_reqs,
 	.main_clk	= "dpll_per_m2_div4_wkupdm_ck",
@@ -2015,6 +2016,7 @@ static struct omap_hwmod am33xx_uart2_hwmod = {
 	.name		= "uart2",
 	.class		= &uart_class,
 	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.mpu_irqs	= am33xx_uart2_irqs,
 	.sdma_reqs	= uart1_edma_reqs,
 	.main_clk	= "dpll_per_m2_div4_ck",
@@ -2042,6 +2044,7 @@ static struct omap_hwmod am33xx_uart3_hwmod = {
 	.name		= "uart3",
 	.class		= &uart_class,
 	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.mpu_irqs	= am33xx_uart3_irqs,
 	.sdma_reqs	= uart3_edma_reqs,
 	.main_clk	= "dpll_per_m2_div4_ck",
@@ -2062,6 +2065,7 @@ static struct omap_hwmod am33xx_uart4_hwmod = {
 	.name		= "uart4",
 	.class		= &uart_class,
 	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.mpu_irqs	= am33xx_uart4_irqs,
 	.sdma_reqs	= uart1_edma_reqs,
 	.main_clk	= "dpll_per_m2_div4_ck",
@@ -2082,6 +2086,7 @@ static struct omap_hwmod am33xx_uart5_hwmod = {
 	.name		= "uart5",
 	.class		= &uart_class,
 	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.mpu_irqs	= am33xx_uart5_irqs,
 	.sdma_reqs	= uart1_edma_reqs,
 	.main_clk	= "dpll_per_m2_div4_ck",
@@ -2102,6 +2107,7 @@ static struct omap_hwmod am33xx_uart6_hwmod = {
 	.name		= "uart6",
 	.class		= &uart_class,
 	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.mpu_irqs	= am33xx_uart6_irqs,
 	.sdma_reqs	= uart1_edma_reqs,
 	.main_clk	= "dpll_per_m2_div4_ck",

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -490,6 +490,7 @@ static struct omap_hwmod omap3xxx_uart1_hwmod = {
 	.mpu_irqs	= omap2_uart1_mpu_irqs,
 	.sdma_reqs	= omap2_uart1_sdma_reqs,
 	.main_clk	= "uart1_fck",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = CORE_MOD,
@@ -508,6 +509,7 @@ static struct omap_hwmod omap3xxx_uart2_hwmod = {
 	.mpu_irqs	= omap2_uart2_mpu_irqs,
 	.sdma_reqs	= omap2_uart2_sdma_reqs,
 	.main_clk	= "uart2_fck",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = CORE_MOD,
@@ -526,6 +528,7 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = {
 	.mpu_irqs	= omap2_uart3_mpu_irqs,
 	.sdma_reqs	= omap2_uart3_sdma_reqs,
 	.main_clk	= "uart3_fck",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = OMAP3430_PER_MOD,
@@ -555,6 +558,7 @@ static struct omap_hwmod omap36xx_uart4_hwmod = {
 	.mpu_irqs	= uart4_mpu_irqs,
 	.sdma_reqs	= uart4_sdma_reqs,
 	.main_clk	= "uart4_fck",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = OMAP3430_PER_MOD,

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -3434,6 +3434,7 @@ static struct omap_hwmod omap44xx_uart1_hwmod = {
 	.name		= "uart1",
 	.class		= &omap44xx_uart_hwmod_class,
 	.clkdm_name	= "l4_per_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.mpu_irqs	= omap44xx_uart1_irqs,
 	.sdma_reqs	= omap44xx_uart1_sdma_reqs,
 	.main_clk	= "func_48m_fclk",
@@ -3462,6 +3463,7 @@ static struct omap_hwmod omap44xx_uart2_hwmod = {
 	.name		= "uart2",
 	.class		= &omap44xx_uart_hwmod_class,
 	.clkdm_name	= "l4_per_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.mpu_irqs	= omap44xx_uart2_irqs,
 	.sdma_reqs	= omap44xx_uart2_sdma_reqs,
 	.main_clk	= "func_48m_fclk",
@@ -3490,7 +3492,8 @@ static struct omap_hwmod omap44xx_uart3_hwmod = {
 	.name		= "uart3",
 	.class		= &omap44xx_uart_hwmod_class,
 	.clkdm_name	= "l4_per_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET |
+				HWMOD_SWSUP_SIDLE_ACT,
 	.mpu_irqs	= omap44xx_uart3_irqs,
 	.sdma_reqs	= omap44xx_uart3_sdma_reqs,
 	.main_clk	= "func_48m_fclk",
@@ -3519,6 +3522,7 @@ static struct omap_hwmod omap44xx_uart4_hwmod = {
 	.name		= "uart4",
 	.class		= &omap44xx_uart_hwmod_class,
 	.clkdm_name	= "l4_per_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.mpu_irqs	= omap44xx_uart4_irqs,
 	.sdma_reqs	= omap44xx_uart4_sdma_reqs,
 	.main_clk	= "func_48m_fclk",

arch/arm/mach-omap2/serial.c

@@ -95,38 +95,9 @@ static void omap_uart_enable_wakeup(struct device *dev, bool enable)
 		omap_hwmod_disable_wakeup(od->hwmods[0]);
 }
 
-/*
- * Errata i291: [UART]:Cannot Acknowledge Idle Requests
- * in Smartidle Mode When Configured for DMA Operations.
- * WA: configure uart in force idle mode.
- */
-static void omap_uart_set_noidle(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct omap_device *od = to_omap_device(pdev);
-
-	omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO);
-}
-
-static void omap_uart_set_smartidle(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct omap_device *od = to_omap_device(pdev);
-	u8 idlemode;
-
-	if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP)
-		idlemode = HWMOD_IDLEMODE_SMART_WKUP;
-	else
-		idlemode = HWMOD_IDLEMODE_SMART;
-
-	omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode);
-}
-
 #else
 static void omap_uart_enable_wakeup(struct device *dev, bool enable)
 {}
-static void omap_uart_set_noidle(struct device *dev) {}
-static void omap_uart_set_smartidle(struct device *dev) {}
 #endif /* CONFIG_PM */
 
 #ifdef CONFIG_OMAP_MUX
@@ -299,8 +270,6 @@ void __init omap_serial_init_port(struct omap_board_data *bdata,
 	omap_up.uartclk = OMAP24XX_BASE_BAUD * 16;
 	omap_up.flags = UPF_BOOT_AUTOCONF;
 	omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count;
-	omap_up.set_forceidle = omap_uart_set_smartidle;
-	omap_up.set_noidle = omap_uart_set_noidle;
 	omap_up.enable_wakeup = omap_uart_enable_wakeup;
 	omap_up.dma_rx_buf_size = info->dma_rx_buf_size;
 	omap_up.dma_rx_timeout = info->dma_rx_timeout;

arch/arm/mach-orion5x/common.c

@@ -199,13 +199,6 @@ void __init orion5x_init_early(void)
 
 	orion_time_set_base(TIMER_VIRT_BASE);
 
-	/*
-	 * Some Orion5x devices allocate their coherent buffers from atomic
-	 * context. Increase size of atomic coherent pool to make sure such
-	 * the allocations won't fail.
-	 */
-	init_dma_coherent_pool_size(SZ_1M);
-
 	/* Initialize the MBUS driver */
 	orion5x_pcie_id(&dev, &rev);
 	if (dev == MV88F5281_DEV_ID)

arch/arm/mach-shmobile/board-marzen.c

@@ -212,8 +212,8 @@ static struct platform_device *marzen_devices[] __initdata = {
 static struct usb_phy *phy;
 static int usb_power_on(struct platform_device *pdev)
 {
-	if (!phy)
-		return -EIO;
+	if (IS_ERR(phy))
+		return PTR_ERR(phy);
 
 	pm_runtime_enable(&pdev->dev);
 	pm_runtime_get_sync(&pdev->dev);
@@ -225,7 +225,7 @@ static int usb_power_on(struct platform_device *pdev)
 
 static void usb_power_off(struct platform_device *pdev)
 {
-	if (!phy)
+	if (IS_ERR(phy))
 		return;
 
 	usb_phy_shutdown(phy);

arch/arm/mach-sunxi/Kconfig

 config ARCH_SUNXI
 	bool "Allwinner A1X SOCs" if ARCH_MULTI_V7
+	select ARCH_REQUIRE_GPIOLIB
 	select CLKSRC_MMIO
 	select CLKSRC_OF
 	select COMMON_CLK

arch/arm/mach-ux500/Kconfig

@@ -51,6 +51,7 @@ config MACH_MOP500
 	bool "U8500 Development platform, MOP500 versions"
 	select I2C
 	select I2C_NOMADIK
+	select REGULATOR
 	select REGULATOR_FIXED_VOLTAGE
 	select SOC_BUS
 	select UX500_SOC_DB8500

arch/arm/mach-ux500/board-mop500.c

@@ -623,7 +623,7 @@ static void __init mop500_init_machine(void)
 	sdi0_reg_info.gpios[0].gpio = GPIO_SDMMC_1V8_3V_SEL;
 
 	mop500_pinmaps_init();
-	parent = u8500_init_devices(&ab8500_platdata);
+	parent = u8500_init_devices();
 
 	for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
 		mop500_platform_devs[i]->dev.parent = parent;
@@ -660,7 +660,7 @@ static void __init snowball_init_machine(void)
 	sdi0_reg_info.gpios[0].gpio = SNOWBALL_SDMMC_1V8_3V_GPIO;
 
 	snowball_pinmaps_init();
-	parent = u8500_init_devices(&ab8500_platdata);
+	parent = u8500_init_devices();
 
 	for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++)
 		snowball_platform_devs[i]->dev.parent = parent;
@@ -698,7 +698,7 @@ static void __init hrefv60_init_machine(void)
 	sdi0_reg_info.gpios[0].gpio = HREFV60_SDMMC_1V8_3V_GPIO;
 
 	hrefv60_pinmaps_init();
-	parent = u8500_init_devices(&ab8500_platdata);
+	parent = u8500_init_devices();
 
 	for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
 		mop500_platform_devs[i]->dev.parent = parent;

arch/arm/mach-ux500/cpu-db8500.c

@@ -206,7 +206,7 @@ static struct device * __init db8500_soc_device_init(void)
 /*
  * This function is called from the board init
  */
-struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500)
+struct device * __init u8500_init_devices(void)
 {
 	struct device *parent;
 	int i;
@@ -220,8 +220,6 @@ struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500)
 	for (i = 0; i < ARRAY_SIZE(platform_devs); i++)
 		platform_devs[i]->dev.parent = parent;
 
-	db8500_prcmu_device.dev.platform_data = ab8500;
-
 	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
 
 	return parent;
@@ -278,7 +276,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
 	OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
 			&db8500_prcmu_pdata),
-	OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x", NULL),
+	OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x.0", NULL),
 	/* Requires device name bindings. */
 	OF_DEV_AUXDATA("stericsson,nmk-pinctrl", U8500_PRCMU_BASE,
 		"pinctrl-db8500", NULL),

arch/arm/mach-ux500/setup.h

@@ -18,7 +18,7 @@
 void __init ux500_map_io(void);
 extern void __init u8500_map_io(void);
 
-extern struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500);
+extern struct device * __init u8500_init_devices(void);
 
 extern void __init ux500_init_irq(void);
 extern void __init ux500_init_late(void);

arch/arm/mach-vt8500/vt8500.c

@@ -173,6 +173,7 @@ static const char * const vt8500_dt_compat[] = {
 	"wm,wm8505",
 	"wm,wm8750",
 	"wm,wm8850",
+	NULL
 };
 
 DT_MACHINE_START(WMT_DT, "VIA/Wondermedia SoC (Device Tree Support)")

arch/arm/plat-orion/common.c

@@ -383,7 +383,7 @@ static struct resource orion_ge10_shared_resources[] = {
 
 static struct platform_device orion_ge10_shared = {
 	.name		= MV643XX_ETH_SHARED_NAME,
-	.id		= 1,
+	.id		= 2,
 	.dev		= {
 		.platform_data	= &orion_ge10_shared_data,
 	},
@@ -398,8 +398,8 @@ static struct resource orion_ge10_resources[] = {
 
 static struct platform_device orion_ge10 = {
 	.name		= MV643XX_ETH_NAME,
-	.id		= 1,
-	.num_resources	= 2,
+	.id		= 2,
+	.num_resources	= 1,
 	.resource	= orion_ge10_resources,
 	.dev		= {
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
@@ -432,7 +432,7 @@ static struct resource orion_ge11_shared_resources[] = {
 
 static struct platform_device orion_ge11_shared = {
 	.name		= MV643XX_ETH_SHARED_NAME,
-	.id		= 1,
+	.id		= 3,
 	.dev		= {
 		.platform_data	= &orion_ge11_shared_data,
 	},
@@ -447,8 +447,8 @@ static struct resource orion_ge11_resources[] = {
 
 static struct platform_device orion_ge11 = {
 	.name		= MV643XX_ETH_NAME,
-	.id		= 1,
-	.num_resources	= 2,
+	.id		= 3,
+	.num_resources	= 1,
 	.resource	= orion_ge11_resources,
 	.dev		= {
 		.coherent_dma_mask	= DMA_BIT_MASK(32),

arch/arm/plat-orion/include/plat/common.h

@@ -10,6 +10,7 @@
 
 #ifndef __PLAT_COMMON_H
 #include <linux/mv643xx_eth.h>
+#include <linux/platform_data/usb-ehci-orion.h>
 
 struct dsa_platform_data;
 struct mv_sata_platform_data;

arch/arm/plat-samsung/devs.c

@@ -311,9 +311,9 @@ struct platform_device s5p_device_jpeg = {
 #ifdef CONFIG_S5P_DEV_FIMD0
 static struct resource s5p_fimd0_resource[] = {
 	[0] = DEFINE_RES_MEM(S5P_PA_FIMD0, SZ_32K),
-	[1] = DEFINE_RES_IRQ(IRQ_FIMD0_VSYNC),
-	[2] = DEFINE_RES_IRQ(IRQ_FIMD0_FIFO),
-	[3] = DEFINE_RES_IRQ(IRQ_FIMD0_SYSTEM),
+	[1] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_VSYNC, "vsync"),
+	[2] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_FIFO, "fifo"),
+	[3] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_SYSTEM, "lcd_sys"),
 };
 
 struct platform_device s5p_device_fimd0 = {

arch/arm/vfp/entry.S

@@ -60,7 +60,7 @@ ENTRY(vfp_testing_entry)
 	str	r11, [r10, #TI_PREEMPT]
 #endif
 	ldr	r0, VFP_arch_address
-	str	r5, [r0]		@ known non-zero value
+	str	r0, [r0]		@ set to non-zero value
 	mov	pc, r9			@ we have handled the fault
 ENDPROC(vfp_testing_entry)
 

arch/arm64/kernel/arm64ksyms.c

@@ -34,6 +34,7 @@ EXPORT_SYMBOL(__strnlen_user);
 EXPORT_SYMBOL(__strncpy_from_user);
 
 EXPORT_SYMBOL(copy_page);
+EXPORT_SYMBOL(clear_page);
 
 EXPORT_SYMBOL(__copy_from_user);
 EXPORT_SYMBOL(__copy_to_user);

arch/arm64/kernel/entry.S

@@ -390,6 +390,16 @@ el0_sync_compat:
 	b.eq	el0_fpsimd_exc
 	cmp	x24, #ESR_EL1_EC_UNKNOWN	// unknown exception in EL0
 	b.eq	el0_undef
+	cmp	x24, #ESR_EL1_EC_CP15_32	// CP15 MRC/MCR trap
+	b.eq	el0_undef
+	cmp	x24, #ESR_EL1_EC_CP15_64	// CP15 MRRC/MCRR trap
+	b.eq	el0_undef
+	cmp	x24, #ESR_EL1_EC_CP14_MR	// CP14 MRC/MCR trap
+	b.eq	el0_undef
+	cmp	x24, #ESR_EL1_EC_CP14_LS	// CP14 LDC/STC trap
+	b.eq	el0_undef
+	cmp	x24, #ESR_EL1_EC_CP14_64	// CP14 MRRC/MCRR trap
+	b.eq	el0_undef
 	cmp	x24, #ESR_EL1_EC_BREAKPT_EL0	// debug exception in EL0
 	b.ge	el0_dbg
 	b	el0_inv

arch/arm64/kernel/traps.c

@@ -267,7 +267,8 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
 		return;
 #endif
 
-	if (show_unhandled_signals) {
+	if (show_unhandled_signals && unhandled_signal(current, SIGILL) &&
+	    printk_ratelimit()) {
 		pr_info("%s[%d]: undefined instruction: pc=%p\n",
 			current->comm, task_pid_nr(current), pc);
 		dump_instr(KERN_INFO, regs);
@@ -294,7 +295,7 @@ asmlinkage long do_ni_syscall(struct pt_regs *regs)
 	}
 #endif
 
-	if (show_unhandled_signals) {
+	if (show_unhandled_signals && printk_ratelimit()) {
 		pr_info("%s[%d]: syscall %d\n", current->comm,
 			task_pid_nr(current), (int)regs->syscallno);
 		dump_instr("", regs);
@@ -310,14 +311,20 @@ asmlinkage long do_ni_syscall(struct pt_regs *regs)
  */
 asmlinkage void bad_mode(struct pt_regs *regs, int reason, unsigned int esr)
 {
+	siginfo_t info;
+	void __user *pc = (void __user *)instruction_pointer(regs);
 	console_verbose();
 
 	pr_crit("Bad mode in %s handler detected, code 0x%08x\n",
 		handler[reason], esr);
+	__show_regs(regs);
+
+	info.si_signo = SIGILL;
+	info.si_errno = 0;
+	info.si_code  = ILL_ILLOPC;
+	info.si_addr  = pc;
 
-	die("Oops - bad mode", regs, 0);
-	local_irq_disable();
-	panic("bad mode");
+	arm64_notify_die("Oops - bad mode", regs, &info, 0);
 }
 
 void __pte_error(const char *file, int line, unsigned long val)

arch/arm64/mm/fault.c

@@ -113,7 +113,8 @@ static void __do_user_fault(struct task_struct *tsk, unsigned long addr,
 {
 	struct siginfo si;
 
-	if (show_unhandled_signals) {
+	if (show_unhandled_signals && unhandled_signal(tsk, sig) &&
+	    printk_ratelimit()) {
 		pr_info("%s[%d]: unhandled %s (%d) at 0x%08lx, esr 0x%03x\n",
 			tsk->comm, task_pid_nr(tsk), fault_name(esr), sig,
 			addr, esr);

arch/m68k/configs/amiga_defconfig

-CONFIG_EXPERIMENTAL=y
 CONFIG_LOCALVERSION="-amiga"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_RELAY=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-CONFIG_AMIGA=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_ATARI_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_SUN_PARTITION=y
+# CONFIG_EFI_PARTITION is not set
+CONFIG_SYSV68_PARTITION=y
+CONFIG_IOSCHED_DEADLINE=m
 CONFIG_M68020=y
 CONFIG_M68030=y
 CONFIG_M68040=y
 CONFIG_M68060=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
+CONFIG_AMIGA=y
 CONFIG_ZORRO=y
 CONFIG_AMIGA_PCMCIA=y
-CONFIG_HEARTBEAT=y
-CONFIG_PROC_HARDWARE=y
 CONFIG_ZORRO_NAMES=y
+# CONFIG_COMPACTION is not set
+CONFIG_CLEANCACHE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
 CONFIG_NET=y
 CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=m
 CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
 CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
 CONFIG_NET_IPGRE=m
 CONFIG_SYN_COOKIES=y
+CONFIG_NET_IPVTI=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
+CONFIG_INET_UDP_DIAG=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_GRE=m
 CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
 # CONFIG_NF_CT_PROTO_DCCP is not set
 CONFIG_NF_CT_PROTO_UDPLITE=m
 CONFIG_NF_CONNTRACK_AMANDA=m
@@ -57,25 +80,37 @@ CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m
 CONFIG_NF_CONNTRACK_IRC=m
 CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
 CONFIG_NF_CONNTRACK_PPTP=m
 CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NETFILTER_XT_SET=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
 CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
@@ -86,6 +121,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
 CONFIG_NETFILTER_XT_MATCH_OWNER=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
@@ -99,22 +136,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
+CONFIG_NF_NAT_IPV4=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -124,7 +170,6 @@ CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
@@ -133,18 +178,30 @@ CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
+CONFIG_NF_NAT_IPV6=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_IP6_NF_TARGET_NPT=m
 CONFIG_IP_DCCP=m
 # CONFIG_IP_DCCP_CCID3 is not set
+CONFIG_SCTP_COOKIE_HMAC_SHA1=y
+CONFIG_RDS=m
+CONFIG_RDS_TCP=m
+CONFIG_L2TP=m
 CONFIG_ATALK=m
+CONFIG_BATMAN_ADV=m
+CONFIG_BATMAN_ADV_DAT=y
+# CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_FW_LOADER_USER_HELPER is not set
 CONFIG_CONNECTOR=m
 CONFIG_PARPORT=m
 CONFIG_PARPORT_AMIGA=m
@@ -154,11 +211,13 @@ CONFIG_AMIGA_FLOPPY=y
 CONFIG_AMIGA_Z2RAM=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_IDE=y
+CONFIG_IDE_GD_ATAPI=y
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_GAYLE=y
 CONFIG_BLK_DEV_BUDDHA=y
@@ -172,57 +231,77 @@ CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_SAS_LIBSAS=m
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-CONFIG_SCSI_SRP_ATTRS=m
-CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_SAS_ATTRS=m
 CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=m
 CONFIG_A3000_SCSI=y
 CONFIG_A2091_SCSI=y
 CONFIG_GVP11_SCSI=y
 CONFIG_SCSI_A4000T=y
 CONFIG_SCSI_ZORRO7XX=y
 CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
 CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID456=m
 CONFIG_BLK_DEV_DM=m
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+CONFIG_DM_CACHE=m
 CONFIG_DM_MIRROR=m
+CONFIG_DM_RAID=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
 CONFIG_DM_UEVENT=y
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-CONFIG_MACVLAN=m
 CONFIG_EQUALIZER=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_BROADCAST=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+CONFIG_VXLAN=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
-CONFIG_NET_ETHERNET=y
-CONFIG_ARIADNE=y
+# CONFIG_NET_VENDOR_3COM is not set
 CONFIG_A2065=y
+CONFIG_ARIADNE=y
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FUJITSU is not set
+# CONFIG_NET_VENDOR_HP is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
 CONFIG_HYDRA=y
-CONFIG_ZORRO8390=y
 CONFIG_APNE=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_ZORRO8390=y
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_NETCONSOLE=m
-CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=m
 CONFIG_KEYBOARD_AMIGA=y
 # CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_MOUSE_PS2 is not set
@@ -233,11 +312,14 @@ CONFIG_INPUT_MISC=y
 CONFIG_INPUT_M68K_BEEP=m
 # CONFIG_SERIO is not set
 CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_PRINTER=m
 # CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=m
-CONFIG_GEN_RTC_X=y
+CONFIG_NTP_PPS=y
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PPS_CLIENT_PARPORT=m
+CONFIG_PTP_1588_CLOCK=m
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FB_CIRRUS=y
@@ -252,48 +334,64 @@ CONFIG_SOUND=m
 CONFIG_DMASOUND_PAULA=m
 CONFIG_HID=m
 CONFIG_HIDRAW=y
+CONFIG_UHID=m
+# CONFIG_HID_GENERIC is not set
 # CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_MSM6242=m
+CONFIG_RTC_DRV_RP5C01=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_HEARTBEAT=y
+CONFIG_PROC_HARDWARE=y
 CONFIG_AMIGA_BUILTIN_SERIAL=y
 CONFIG_SERIAL_CONSOLE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
 CONFIG_REISERFS_FS=m
 CONFIG_JFS_FS=m
 CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
-# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
 CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
+CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_ECRYPT_FS_MESSAGING=y
 CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 CONFIG_SQUASHFS=m
-CONFIG_MINIX_FS=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
 CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
+CONFIG_NFS_SWAP=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_CIFS=m
+# CONFIG_CIFS_DEBUG is not set
 CONFIG_CODA_FS=m
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
@@ -332,10 +430,23 @@ CONFIG_NLS_ISO8859_14=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_MAC_ROMAN=m
+CONFIG_NLS_MAC_CELTIC=m
+CONFIG_NLS_MAC_CENTEURO=m
+CONFIG_NLS_MAC_CROATIAN=m
+CONFIG_NLS_MAC_CYRILLIC=m
+CONFIG_NLS_MAC_GAELIC=m
+CONFIG_NLS_MAC_GREEK=m
+CONFIG_NLS_MAC_ICELAND=m
+CONFIG_NLS_MAC_INUIT=m
+CONFIG_NLS_MAC_ROMANIAN=m
+CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_ASYNC_RAID6_TEST=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
@@ -345,19 +456,16 @@ CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD128=m
 CONFIG_CRYPTO_RMD160=m
 CONFIG_CRYPTO_RMD256=m
 CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -373,6 +481,14 @@ CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
 # CONFIG_CRYPTO_HW is not set
-CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/apollo_defconfig

-CONFIG_EXPERIMENTAL=y
 CONFIG_LOCALVERSION="-apollo"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_RELAY=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-CONFIG_APOLLO=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_ATARI_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_SUN_PARTITION=y
+# CONFIG_EFI_PARTITION is not set
+CONFIG_SYSV68_PARTITION=y
+CONFIG_IOSCHED_DEADLINE=m
 CONFIG_M68020=y
 CONFIG_M68030=y
 CONFIG_M68040=y
 CONFIG_M68060=y
+CONFIG_APOLLO=y
+# CONFIG_COMPACTION is not set
+CONFIG_CLEANCACHE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-CONFIG_HEARTBEAT=y
-CONFIG_PROC_HARDWARE=y
 CONFIG_NET=y
 CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=m
 CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
 CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
 CONFIG_NET_IPGRE=m
 CONFIG_SYN_COOKIES=y
+CONFIG_NET_IPVTI=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
+CONFIG_INET_UDP_DIAG=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_GRE=m
 CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
 # CONFIG_NF_CT_PROTO_DCCP is not set
 CONFIG_NF_CT_PROTO_UDPLITE=m
 CONFIG_NF_CONNTRACK_AMANDA=m
@@ -57,25 +78,37 @@ CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m
 CONFIG_NF_CONNTRACK_IRC=m
 CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
 CONFIG_NF_CONNTRACK_PPTP=m
 CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NETFILTER_XT_SET=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
 CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
@@ -86,6 +119,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
 CONFIG_NETFILTER_XT_MATCH_OWNER=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
@@ -99,22 +134,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
+CONFIG_NF_NAT_IPV4=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -124,7 +168,6 @@ CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
@@ -133,21 +176,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
+CONFIG_NF_NAT_IPV6=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_IP6_NF_TARGET_NPT=m
 CONFIG_IP_DCCP=m
 # CONFIG_IP_DCCP_CCID3 is not set
+CONFIG_SCTP_COOKIE_HMAC_SHA1=y
+CONFIG_RDS=m
+CONFIG_RDS_TCP=m
+CONFIG_L2TP=m
 CONFIG_ATALK=m
+CONFIG_BATMAN_ADV=m
+CONFIG_BATMAN_ADV_DAT=y
+# CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_FW_LOADER_USER_HELPER is not set
 CONFIG_CONNECTOR=m
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_CDROM_PKTCDVD=m
@@ -162,57 +218,74 @@ CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_SAS_LIBSAS=m
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-CONFIG_SCSI_SRP_ATTRS=m
-CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_SAS_ATTRS=m
 CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=m
 CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
 CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID456=m
 CONFIG_BLK_DEV_DM=m
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+CONFIG_DM_CACHE=m
 CONFIG_DM_MIRROR=m
+CONFIG_DM_RAID=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
 CONFIG_DM_UEVENT=y
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-CONFIG_MACVLAN=m
 CONFIG_EQUALIZER=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_BROADCAST=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+CONFIG_VXLAN=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
-CONFIG_NET_ETHERNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_NETCONSOLE=m
-CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=m
 # CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_MOUSE_PS2=m
+# CONFIG_MOUSE_PS2 is not set
 CONFIG_MOUSE_SERIAL=m
 CONFIG_SERIO=m
-# CONFIG_SERIO_SERPORT is not set
 CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
 # CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=m
-CONFIG_GEN_RTC_X=y
+CONFIG_NTP_PPS=y
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PTP_1588_CLOCK=m
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
@@ -221,47 +294,61 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_HID=m
 CONFIG_HIDRAW=y
+CONFIG_UHID=m
+# CONFIG_HID_GENERIC is not set
 # CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_GENERIC=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_HEARTBEAT=y
+CONFIG_PROC_HARDWARE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
 CONFIG_REISERFS_FS=m
 CONFIG_JFS_FS=m
 CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
-# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
 CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
+CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_ECRYPT_FS_MESSAGING=y
 CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 CONFIG_SQUASHFS=m
-CONFIG_MINIX_FS=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
 CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
+CONFIG_NFS_SWAP=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_CIFS=m
+# CONFIG_CIFS_DEBUG is not set
 CONFIG_CODA_FS=m
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
@@ -300,10 +387,23 @@ CONFIG_NLS_ISO8859_14=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_MAC_ROMAN=m
+CONFIG_NLS_MAC_CELTIC=m
+CONFIG_NLS_MAC_CENTEURO=m
+CONFIG_NLS_MAC_CROATIAN=m
+CONFIG_NLS_MAC_CYRILLIC=m
+CONFIG_NLS_MAC_GAELIC=m
+CONFIG_NLS_MAC_GREEK=m
+CONFIG_NLS_MAC_ICELAND=m
+CONFIG_NLS_MAC_INUIT=m
+CONFIG_NLS_MAC_ROMANIAN=m
+CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_ASYNC_RAID6_TEST=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
@@ -313,19 +413,16 @@ CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD128=m
 CONFIG_CRYPTO_RMD160=m
 CONFIG_CRYPTO_RMD256=m
 CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -341,6 +438,14 @@ CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
 # CONFIG_CRYPTO_HW is not set
-CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/atari_defconfig

-CONFIG_EXPERIMENTAL=y
 CONFIG_LOCALVERSION="-atari"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_RELAY=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-CONFIG_ATARI=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_SUN_PARTITION=y
+# CONFIG_EFI_PARTITION is not set
+CONFIG_SYSV68_PARTITION=y
+CONFIG_IOSCHED_DEADLINE=m
 CONFIG_M68020=y
 CONFIG_M68030=y
 CONFIG_M68040=y
 CONFIG_M68060=y
+CONFIG_ATARI=y
+# CONFIG_COMPACTION is not set
+CONFIG_CLEANCACHE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-CONFIG_STRAM_PROC=y
-CONFIG_HEARTBEAT=y
-CONFIG_PROC_HARDWARE=y
 CONFIG_NET=y
 CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=m
 CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
 CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
 CONFIG_NET_IPGRE=m
 CONFIG_SYN_COOKIES=y
+CONFIG_NET_IPVTI=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
+CONFIG_INET_UDP_DIAG=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_GRE=m
 CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
 # CONFIG_NF_CT_PROTO_DCCP is not set
 CONFIG_NF_CT_PROTO_UDPLITE=m
 CONFIG_NF_CONNTRACK_AMANDA=m
@@ -55,25 +77,37 @@ CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m
 CONFIG_NF_CONNTRACK_IRC=m
 CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
 CONFIG_NF_CONNTRACK_PPTP=m
 CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NETFILTER_XT_SET=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
 CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
@@ -84,6 +118,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
 CONFIG_NETFILTER_XT_MATCH_OWNER=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
@@ -97,22 +133,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
+CONFIG_NF_NAT_IPV4=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -122,7 +167,6 @@ CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
@@ -131,18 +175,30 @@ CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
+CONFIG_NF_NAT_IPV6=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_IP6_NF_TARGET_NPT=m
 CONFIG_IP_DCCP=m
 # CONFIG_IP_DCCP_CCID3 is not set
+CONFIG_SCTP_COOKIE_HMAC_SHA1=y
+CONFIG_RDS=m
+CONFIG_RDS_TCP=m
+CONFIG_L2TP=m
 CONFIG_ATALK=m
+CONFIG_BATMAN_ADV=m
+CONFIG_BATMAN_ADV_DAT=y
+# CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_FW_LOADER_USER_HELPER is not set
 CONFIG_CONNECTOR=m
 CONFIG_PARPORT=m
 CONFIG_PARPORT_ATARI=m
@@ -150,11 +206,13 @@ CONFIG_PARPORT_1284=y
 CONFIG_ATARI_FLOPPY=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_IDE=y
+CONFIG_IDE_GD_ATAPI=y
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_FALCON_IDE=y
 CONFIG_RAID_ATTRS=m
@@ -167,63 +225,81 @@ CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_SAS_LIBSAS=m
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-CONFIG_SCSI_SRP_ATTRS=m
-CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_SAS_ATTRS=m
 CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=m
 CONFIG_ATARI_SCSI=y
 CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
 CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID456=m
 CONFIG_BLK_DEV_DM=m
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+CONFIG_DM_CACHE=m
 CONFIG_DM_MIRROR=m
+CONFIG_DM_RAID=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
 CONFIG_DM_UEVENT=y
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-CONFIG_MACVLAN=m
 CONFIG_EQUALIZER=m
-CONFIG_VETH=m
-CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_BROADCAST=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+CONFIG_VXLAN=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_VETH=m
 CONFIG_ATARILANCE=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_NETCONSOLE=m
-CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=m
 CONFIG_KEYBOARD_ATARI=y
 # CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_MOUSE_PS2=m
+# CONFIG_MOUSE_PS2 is not set
 CONFIG_MOUSE_ATARI=m
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_M68K_BEEP=m
-# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO is not set
 CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_PRINTER=m
 # CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=m
-CONFIG_GEN_RTC_X=y
+CONFIG_NTP_PPS=y
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PPS_CLIENT_PARPORT=m
+CONFIG_PTP_1588_CLOCK=m
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FB_ATARI=y
@@ -233,47 +309,64 @@ CONFIG_SOUND=m
 CONFIG_DMASOUND_ATARI=m
 CONFIG_HID=m
 CONFIG_HIDRAW=y
-# CONFIG_USB_SUPPORT is not set
+CONFIG_UHID=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_GENERIC=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_HEARTBEAT=y
+CONFIG_PROC_HARDWARE=y
+CONFIG_NATFEAT=y
+CONFIG_NFBLOCK=y
+CONFIG_NFCON=y
+CONFIG_NFETH=y
 CONFIG_ATARI_DSP56K=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
 CONFIG_REISERFS_FS=m
 CONFIG_JFS_FS=m
 CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
-# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
 CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
+CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_ECRYPT_FS_MESSAGING=y
 CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 CONFIG_SQUASHFS=m
-CONFIG_MINIX_FS=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
 CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
+CONFIG_NFS_SWAP=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_CIFS=m
+# CONFIG_CIFS_DEBUG is not set
 CONFIG_CODA_FS=m
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
@@ -312,10 +405,23 @@ CONFIG_NLS_ISO8859_14=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_MAC_ROMAN=m
+CONFIG_NLS_MAC_CELTIC=m
+CONFIG_NLS_MAC_CENTEURO=m
+CONFIG_NLS_MAC_CROATIAN=m
+CONFIG_NLS_MAC_CYRILLIC=m
+CONFIG_NLS_MAC_GAELIC=m
+CONFIG_NLS_MAC_GREEK=m
+CONFIG_NLS_MAC_ICELAND=m
+CONFIG_NLS_MAC_INUIT=m
+CONFIG_NLS_MAC_ROMANIAN=m
+CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_ASYNC_RAID6_TEST=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
@@ -325,19 +431,16 @@ CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD128=m
 CONFIG_CRYPTO_RMD160=m
 CONFIG_CRYPTO_RMD256=m
 CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -353,6 +456,14 @@ CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
 # CONFIG_CRYPTO_HW is not set
-CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/bvme6000_defconfig

-CONFIG_EXPERIMENTAL=y
 CONFIG_LOCALVERSION="-bvme6000"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_RELAY=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-CONFIG_VME=y
-CONFIG_BVME6000=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_ATARI_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_SUN_PARTITION=y
+# CONFIG_EFI_PARTITION is not set
+CONFIG_IOSCHED_DEADLINE=m
 CONFIG_M68040=y
 CONFIG_M68060=y
+CONFIG_VME=y
+CONFIG_BVME6000=y
+# CONFIG_COMPACTION is not set
+CONFIG_CLEANCACHE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-CONFIG_PROC_HARDWARE=y
 CONFIG_NET=y
 CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=m
 CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
 CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
 CONFIG_NET_IPGRE=m
 CONFIG_SYN_COOKIES=y
+CONFIG_NET_IPVTI=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
+CONFIG_INET_UDP_DIAG=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_GRE=m
 CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
 # CONFIG_NF_CT_PROTO_DCCP is not set
 CONFIG_NF_CT_PROTO_UDPLITE=m
 CONFIG_NF_CONNTRACK_AMANDA=m
@@ -55,25 +76,37 @@ CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m
 CONFIG_NF_CONNTRACK_IRC=m
 CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
 CONFIG_NF_CONNTRACK_PPTP=m
 CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NETFILTER_XT_SET=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
 CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
@@ -84,6 +117,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
 CONFIG_NETFILTER_XT_MATCH_OWNER=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
@@ -97,22 +132,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
+CONFIG_NF_NAT_IPV4=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -122,7 +166,6 @@ CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
@@ -131,21 +174,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
+CONFIG_NF_NAT_IPV6=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_IP6_NF_TARGET_NPT=m
 CONFIG_IP_DCCP=m
 # CONFIG_IP_DCCP_CCID3 is not set
+CONFIG_SCTP_COOKIE_HMAC_SHA1=y
+CONFIG_RDS=m
+CONFIG_RDS_TCP=m
+CONFIG_L2TP=m
 CONFIG_ATALK=m
+CONFIG_BATMAN_ADV=m
+CONFIG_BATMAN_ADV_DAT=y
+# CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_FW_LOADER_USER_HELPER is not set
 CONFIG_CONNECTOR=m
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_CDROM_PKTCDVD=m
@@ -160,103 +216,131 @@ CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_SAS_LIBSAS=m
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-CONFIG_SCSI_SRP_ATTRS=m
-CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_SAS_ATTRS=m
 CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=m
 CONFIG_BVME6000_SCSI=y
 CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
 CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID456=m
 CONFIG_BLK_DEV_DM=m
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+CONFIG_DM_CACHE=m
 CONFIG_DM_MIRROR=m
+CONFIG_DM_RAID=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
 CONFIG_DM_UEVENT=y
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-CONFIG_MACVLAN=m
 CONFIG_EQUALIZER=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_BROADCAST=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+CONFIG_VXLAN=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
-CONFIG_NET_ETHERNET=y
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
 CONFIG_BVME6000_NET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_NETCONSOLE=m
-CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=m
 # CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_SERIAL=m
-CONFIG_SERIO=m
-# CONFIG_SERIO_SERPORT is not set
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_SERIO is not set
 CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
 # CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=m
-CONFIG_GEN_RTC_X=y
+CONFIG_NTP_PPS=y
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PTP_1588_CLOCK=m
 # CONFIG_HWMON is not set
 CONFIG_HID=m
 CONFIG_HIDRAW=y
+CONFIG_UHID=m
+# CONFIG_HID_GENERIC is not set
 # CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_GENERIC=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_PROC_HARDWARE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
 CONFIG_REISERFS_FS=m
 CONFIG_JFS_FS=m
 CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
-# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
 CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
+CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_ECRYPT_FS_MESSAGING=y
 CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 CONFIG_SQUASHFS=m
-CONFIG_MINIX_FS=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
 CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
+CONFIG_NFS_SWAP=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_CIFS=m
+# CONFIG_CIFS_DEBUG is not set
 CONFIG_CODA_FS=m
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
@@ -295,10 +379,23 @@ CONFIG_NLS_ISO8859_14=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_MAC_ROMAN=m
+CONFIG_NLS_MAC_CELTIC=m
+CONFIG_NLS_MAC_CENTEURO=m
+CONFIG_NLS_MAC_CROATIAN=m
+CONFIG_NLS_MAC_CYRILLIC=m
+CONFIG_NLS_MAC_GAELIC=m
+CONFIG_NLS_MAC_GREEK=m
+CONFIG_NLS_MAC_ICELAND=m
+CONFIG_NLS_MAC_INUIT=m
+CONFIG_NLS_MAC_ROMANIAN=m
+CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_ASYNC_RAID6_TEST=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
@@ -308,19 +405,16 @@ CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD128=m
 CONFIG_CRYPTO_RMD160=m
 CONFIG_CRYPTO_RMD256=m
 CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -336,7 +430,14 @@ CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
 # CONFIG_CRYPTO_HW is not set
-CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
-CONFIG_CRC32=m
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/hp300_defconfig

-CONFIG_EXPERIMENTAL=y
 CONFIG_LOCALVERSION="-hp300"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_RELAY=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-CONFIG_HP300=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_ATARI_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_SUN_PARTITION=y
+# CONFIG_EFI_PARTITION is not set
+CONFIG_SYSV68_PARTITION=y
+CONFIG_IOSCHED_DEADLINE=m
 CONFIG_M68020=y
 CONFIG_M68030=y
 CONFIG_M68040=y
 CONFIG_M68060=y
+CONFIG_HP300=y
+# CONFIG_COMPACTION is not set
+CONFIG_CLEANCACHE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-CONFIG_PROC_HARDWARE=y
 CONFIG_NET=y
 CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=m
 CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
 CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
 CONFIG_NET_IPGRE=m
 CONFIG_SYN_COOKIES=y
+CONFIG_NET_IPVTI=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
+CONFIG_INET_UDP_DIAG=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_GRE=m
 CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
 # CONFIG_NF_CT_PROTO_DCCP is not set
 CONFIG_NF_CT_PROTO_UDPLITE=m
 CONFIG_NF_CONNTRACK_AMANDA=m
@@ -56,25 +78,37 @@ CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m
 CONFIG_NF_CONNTRACK_IRC=m
 CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
 CONFIG_NF_CONNTRACK_PPTP=m
 CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NETFILTER_XT_SET=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
 CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
@@ -85,6 +119,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
 CONFIG_NETFILTER_XT_MATCH_OWNER=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
@@ -98,22 +134,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
+CONFIG_NF_NAT_IPV4=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -123,7 +168,6 @@ CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
@@ -132,21 +176,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
+CONFIG_NF_NAT_IPV6=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_IP6_NF_TARGET_NPT=m
 CONFIG_IP_DCCP=m
 # CONFIG_IP_DCCP_CCID3 is not set
+CONFIG_SCTP_COOKIE_HMAC_SHA1=y
+CONFIG_RDS=m
+CONFIG_RDS_TCP=m
+CONFIG_L2TP=m
 CONFIG_ATALK=m
+CONFIG_BATMAN_ADV=m
+CONFIG_BATMAN_ADV_DAT=y
+# CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_FW_LOADER_USER_HELPER is not set
 CONFIG_CONNECTOR=m
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_CDROM_PKTCDVD=m
@@ -161,59 +218,77 @@ CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_SAS_LIBSAS=m
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-CONFIG_SCSI_SRP_ATTRS=m
-CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_SAS_ATTRS=m
 CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=m
 CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
 CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID456=m
 CONFIG_BLK_DEV_DM=m
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+CONFIG_DM_CACHE=m
 CONFIG_DM_MIRROR=m
+CONFIG_DM_RAID=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
 CONFIG_DM_UEVENT=y
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-CONFIG_MACVLAN=m
 CONFIG_EQUALIZER=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_BROADCAST=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+CONFIG_VXLAN=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
-CONFIG_NET_ETHERNET=y
 CONFIG_HPLANCE=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_NETCONSOLE=m
-CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=m
 # CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_MOUSE_PS2=m
+# CONFIG_MOUSE_PS2 is not set
 CONFIG_MOUSE_SERIAL=m
 CONFIG_INPUT_MISC=y
 CONFIG_HP_SDC_RTC=m
-# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_SERPORT=m
 CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
 # CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=m
-CONFIG_GEN_RTC_X=y
+CONFIG_NTP_PPS=y
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PTP_1588_CLOCK=m
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
@@ -222,47 +297,60 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_HID=m
 CONFIG_HIDRAW=y
+CONFIG_UHID=m
+# CONFIG_HID_GENERIC is not set
 # CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_GENERIC=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_PROC_HARDWARE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
 CONFIG_REISERFS_FS=m
 CONFIG_JFS_FS=m
 CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
-# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
 CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
+CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_ECRYPT_FS_MESSAGING=y
 CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 CONFIG_SQUASHFS=m
-CONFIG_MINIX_FS=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
 CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
+CONFIG_NFS_SWAP=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_CIFS=m
+# CONFIG_CIFS_DEBUG is not set
 CONFIG_CODA_FS=m
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
@@ -301,10 +389,23 @@ CONFIG_NLS_ISO8859_14=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_MAC_ROMAN=m
+CONFIG_NLS_MAC_CELTIC=m
+CONFIG_NLS_MAC_CENTEURO=m
+CONFIG_NLS_MAC_CROATIAN=m
+CONFIG_NLS_MAC_CYRILLIC=m
+CONFIG_NLS_MAC_GAELIC=m
+CONFIG_NLS_MAC_GREEK=m
+CONFIG_NLS_MAC_ICELAND=m
+CONFIG_NLS_MAC_INUIT=m
+CONFIG_NLS_MAC_ROMANIAN=m
+CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_ASYNC_RAID6_TEST=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
@@ -314,19 +415,16 @@ CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD128=m
 CONFIG_CRYPTO_RMD160=m
 CONFIG_CRYPTO_RMD256=m
 CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -342,6 +440,14 @@ CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
 # CONFIG_CRYPTO_HW is not set
-CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/mac_defconfig

-CONFIG_EXPERIMENTAL=y
 CONFIG_LOCALVERSION="-mac"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_RELAY=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-CONFIG_MAC=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_ATARI_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_SUN_PARTITION=y
+# CONFIG_EFI_PARTITION is not set
+CONFIG_SYSV68_PARTITION=y
+CONFIG_IOSCHED_DEADLINE=m
 CONFIG_M68020=y
 CONFIG_M68030=y
 CONFIG_M68040=y
+CONFIG_M68KFPU_EMU=y
+CONFIG_MAC=y
+# CONFIG_COMPACTION is not set
+CONFIG_CLEANCACHE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-CONFIG_PROC_HARDWARE=y
 CONFIG_NET=y
 CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=m
 CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
 CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
 CONFIG_NET_IPGRE=m
 CONFIG_SYN_COOKIES=y
+CONFIG_NET_IPVTI=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
+CONFIG_INET_UDP_DIAG=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_GRE=m
 CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_ZONES=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
 # CONFIG_NF_CT_PROTO_DCCP is not set
 CONFIG_NF_CT_PROTO_UDPLITE=m
 CONFIG_NF_CONNTRACK_AMANDA=m
@@ -51,25 +77,37 @@ CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m
 CONFIG_NF_CONNTRACK_IRC=m
 CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
 CONFIG_NF_CONNTRACK_PPTP=m
 CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NETFILTER_XT_SET=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
 CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
@@ -80,6 +118,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
 CONFIG_NETFILTER_XT_MATCH_OWNER=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
@@ -93,22 +133,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
+CONFIG_NF_NAT_IPV4=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -118,7 +167,6 @@ CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
@@ -127,31 +175,45 @@ CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
+CONFIG_NF_NAT_IPV6=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_IP6_NF_TARGET_NPT=m
 CONFIG_IP_DCCP=m
 # CONFIG_IP_DCCP_CCID3 is not set
+CONFIG_SCTP_COOKIE_HMAC_SHA1=y
+CONFIG_RDS=m
+CONFIG_RDS_TCP=m
+CONFIG_L2TP=m
 CONFIG_ATALK=m
 CONFIG_DEV_APPLETALK=m
 CONFIG_IPDDP=m
 CONFIG_IPDDP_ENCAP=y
 CONFIG_IPDDP_DECAP=y
+CONFIG_BATMAN_ADV=m
+CONFIG_BATMAN_ADV_DAT=y
+# CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_FW_LOADER_USER_HELPER is not set
 CONFIG_CONNECTOR=m
-CONFIG_BLK_DEV_SWIM=y
+CONFIG_BLK_DEV_SWIM=m
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_IDE=y
+CONFIG_IDE_GD_ATAPI=y
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_MAC_IDE=y
 CONFIG_RAID_ATTRS=m
@@ -164,29 +226,30 @@ CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_SAS_LIBSAS=m
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-CONFIG_SCSI_SRP_ATTRS=m
-CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_SAS_ATTRS=m
 CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=m
 CONFIG_MAC_SCSI=y
 CONFIG_SCSI_MAC_ESP=y
 CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
 CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID456=m
 CONFIG_BLK_DEV_DM=m
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+CONFIG_DM_CACHE=m
 CONFIG_DM_MIRROR=m
+CONFIG_DM_RAID=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
 CONFIG_DM_UEVENT=y
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
 CONFIG_ADB=y
 CONFIG_ADB_MACII=y
-CONFIG_ADB_MACIISI=y
 CONFIG_ADB_IOP=y
 CONFIG_ADB_PMU68K=y
 CONFIG_ADB_CUDA=y
@@ -194,46 +257,61 @@ CONFIG_INPUT_ADBHID=y
 CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-CONFIG_MACVLAN=m
 CONFIG_EQUALIZER=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_BROADCAST=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+CONFIG_VXLAN=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
-CONFIG_NET_ETHERNET=y
-CONFIG_MAC8390=y
-CONFIG_MAC89x0=m
-CONFIG_MACSONIC=m
 CONFIG_MACMACE=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+CONFIG_MAC89x0=y
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+CONFIG_MACSONIC=y
+CONFIG_MAC8390=y
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_NETCONSOLE=m
-CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=m
 # CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_MOUSE_PS2=m
+# CONFIG_MOUSE_PS2 is not set
 CONFIG_MOUSE_SERIAL=m
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_M68K_BEEP=m
 CONFIG_SERIO=m
-# CONFIG_SERIO_SERPORT is not set
 CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_PMACZILOG=y
 CONFIG_SERIAL_PMACZILOG_TTYS=y
 CONFIG_SERIAL_PMACZILOG_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=m
-CONFIG_GEN_RTC_X=y
+CONFIG_NTP_PPS=y
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PTP_1588_CLOCK=m
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FB_VALKYRIE=y
@@ -242,46 +320,60 @@ CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 CONFIG_HID=m
 CONFIG_HIDRAW=y
+CONFIG_UHID=m
+# CONFIG_HID_GENERIC is not set
 # CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_GENERIC=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_PROC_HARDWARE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
 CONFIG_REISERFS_FS=m
 CONFIG_JFS_FS=m
 CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
-# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
 CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
+CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=y
-CONFIG_HFSPLUS_FS=y
+CONFIG_ECRYPT_FS=m
+CONFIG_ECRYPT_FS_MESSAGING=y
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 CONFIG_SQUASHFS=m
-CONFIG_MINIX_FS=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
 CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
+CONFIG_NFS_FS=y
 CONFIG_NFS_V4=y
+CONFIG_NFS_SWAP=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_CIFS=m
+# CONFIG_CIFS_DEBUG is not set
 CONFIG_CODA_FS=m
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
@@ -320,10 +412,23 @@ CONFIG_NLS_ISO8859_14=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_MAC_ROMAN=m
+CONFIG_NLS_MAC_CELTIC=m
+CONFIG_NLS_MAC_CENTEURO=m
+CONFIG_NLS_MAC_CROATIAN=m
+CONFIG_NLS_MAC_CYRILLIC=m
+CONFIG_NLS_MAC_GAELIC=m
+CONFIG_NLS_MAC_GREEK=m
+CONFIG_NLS_MAC_ICELAND=m
+CONFIG_NLS_MAC_INUIT=m
+CONFIG_NLS_MAC_ROMANIAN=m
+CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_ASYNC_RAID6_TEST=m
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
@@ -333,19 +438,16 @@ CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD128=m
 CONFIG_CRYPTO_RMD160=m
 CONFIG_CRYPTO_RMD256=m
 CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -361,6 +463,14 @@ CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
 # CONFIG_CRYPTO_HW is not set
-CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_TEST=m

arch/m68k/include/asm/Kbuild

@@ -6,7 +6,6 @@ generic-y += device.h
 generic-y += emergency-restart.h
 generic-y += errno.h
 generic-y += exec.h
-generic-y += futex.h
 generic-y += hw_irq.h
 generic-y += ioctl.h
 generic-y += ipcbuf.h

arch/m68k/include/asm/futex.h

+#ifndef _ASM_M68K_FUTEX_H
+#define _ASM_M68K_FUTEX_H
+
+#ifdef __KERNEL__
+#if !defined(CONFIG_MMU)
+#include <asm-generic/futex.h>
+#else	/* CONFIG_MMU */
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+
+static inline int
+futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
+			      u32 oldval, u32 newval)
+{
+	u32 val;
+
+	if (unlikely(get_user(val, uaddr) != 0))
+		return -EFAULT;
+
+	if (val == oldval && unlikely(put_user(newval, uaddr) != 0))
+		return -EFAULT;
+
+	*uval = val;
+
+	return 0;
+}
+
+static inline int
+futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr)
+{
+	int op = (encoded_op >> 28) & 7;
+	int cmp = (encoded_op >> 24) & 15;
+	int oparg = (encoded_op << 8) >> 20;
+	int cmparg = (encoded_op << 20) >> 20;
+	int oldval, ret;
+	u32 tmp;
+
+	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+		oparg = 1 << oparg;
+
+	pagefault_disable();	/* implies preempt_disable() */
+
+	ret = -EFAULT;
+	if (unlikely(get_user(oldval, uaddr) != 0))
+		goto out_pagefault_enable;
+
+	ret = 0;
+	tmp = oldval;
+
+	switch (op) {
+	case FUTEX_OP_SET:
+		tmp = oparg;
+		break;
+	case FUTEX_OP_ADD:
+		tmp += oparg;
+		break;
+	case FUTEX_OP_OR:
+		tmp |= oparg;
+		break;
+	case FUTEX_OP_ANDN:
+		tmp &= ~oparg;
+		break;
+	case FUTEX_OP_XOR:
+		tmp ^= oparg;
+		break;
+	default:
+		ret = -ENOSYS;
+	}
+
+	if (ret == 0 && unlikely(put_user(tmp, uaddr) != 0))
+		ret = -EFAULT;
+
+out_pagefault_enable:
+	pagefault_enable();	/* subsumes preempt_enable() */
+
+	if (ret == 0) {
+		switch (cmp) {
+		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+		default: ret = -ENOSYS;
+		}
+	}
+	return ret;
+}
+
+#endif /* CONFIG_MMU */
+#endif /* __KERNEL__ */
+#endif /* _ASM_M68K_FUTEX_H */

arch/m68k/kernel/head.S

@@ -2752,11 +2752,9 @@ func_return	get_new_page
 #ifdef CONFIG_MAC
 
 L(scc_initable_mac):
-	.byte	9,12		/* Reset */
 	.byte	4,0x44		/* x16, 1 stopbit, no parity */
 	.byte	3,0xc0		/* receiver: 8 bpc */
 	.byte	5,0xe2		/* transmitter: 8 bpc, assert dtr/rts */
-	.byte	9,0		/* no interrupts */
 	.byte	10,0		/* NRZ */
 	.byte	11,0x50		/* use baud rate generator */
 	.byte	12,1,13,0	/* 38400 baud */
@@ -2899,6 +2897,7 @@ func_start	serial_init,%d0/%d1/%a0/%a1
 	is_not_mac(L(serial_init_not_mac))
 
 #ifdef SERIAL_DEBUG
+
 /* You may define either or both of these. */
 #define MAC_USE_SCC_A /* Modem port */
 #define MAC_USE_SCC_B /* Printer port */
@@ -2908,9 +2907,21 @@ func_start	serial_init,%d0/%d1/%a0/%a1
 #define mac_scc_cha_b_data_offset	0x4
 #define mac_scc_cha_a_data_offset	0x6
 
+#if defined(MAC_USE_SCC_A) || defined(MAC_USE_SCC_B)
+	movel	%pc@(L(mac_sccbase)),%a0
+	/* Reset SCC device */
+	moveb	#9,%a0@(mac_scc_cha_a_ctrl_offset)
+	moveb	#0xc0,%a0@(mac_scc_cha_a_ctrl_offset)
+	/* Wait for 5 PCLK cycles, which is about 68 CPU cycles */
+	/* 5 / 3.6864 MHz = approx. 1.36 us = 68 / 50 MHz */
+	movel	#35,%d0
+5:
+	subq	#1,%d0
+	jne	5b
+#endif
+
 #ifdef MAC_USE_SCC_A
 	/* Initialize channel A */
-	movel	%pc@(L(mac_sccbase)),%a0
 	lea	%pc@(L(scc_initable_mac)),%a1
 5:	moveb	%a1@+,%d0
 	jmi	6f
@@ -2922,9 +2933,6 @@ func_start	serial_init,%d0/%d1/%a0/%a1
 
 #ifdef MAC_USE_SCC_B
 	/* Initialize channel B */
-#ifndef MAC_USE_SCC_A	/* Load mac_sccbase only if needed */
-	movel	%pc@(L(mac_sccbase)),%a0
-#endif	/* MAC_USE_SCC_A */
 	lea	%pc@(L(scc_initable_mac)),%a1
 7:	moveb	%a1@+,%d0
 	jmi	8f
@@ -2933,6 +2941,7 @@ func_start	serial_init,%d0/%d1/%a0/%a1
 	jra	7b
 8:
 #endif	/* MAC_USE_SCC_B */
+
 #endif	/* SERIAL_DEBUG */
 
 	jra	L(serial_init_done)
@@ -3006,17 +3015,17 @@ func_start	serial_putc,%d0/%d1/%a0/%a1
 
 #ifdef SERIAL_DEBUG
 
-#ifdef MAC_USE_SCC_A
+#if defined(MAC_USE_SCC_A) || defined(MAC_USE_SCC_B)
 	movel	%pc@(L(mac_sccbase)),%a1
+#endif
+
+#ifdef MAC_USE_SCC_A
 3:	btst	#2,%a1@(mac_scc_cha_a_ctrl_offset)
 	jeq	3b
 	moveb	%d0,%a1@(mac_scc_cha_a_data_offset)
 #endif	/* MAC_USE_SCC_A */
 
 #ifdef MAC_USE_SCC_B
-#ifndef MAC_USE_SCC_A	/* Load mac_sccbase only if needed */
-	movel	%pc@(L(mac_sccbase)),%a1
-#endif	/* MAC_USE_SCC_A */
 4:	btst	#2,%a1@(mac_scc_cha_b_ctrl_offset)
 	jeq	4b
 	moveb	%d0,%a1@(mac_scc_cha_b_data_offset)

arch/microblaze/include/asm/cacheflush.h

@@ -102,21 +102,23 @@ do { \
 
 #define flush_cache_range(vma, start, len) do { } while (0)
 
-#define copy_to_user_page(vma, page, vaddr, dst, src, len)		\
-do {									\
-	u32 addr = virt_to_phys(dst);					\
-	memcpy((dst), (src), (len));					\
-	if (vma->vm_flags & VM_EXEC) {					\
-		invalidate_icache_range((unsigned) (addr),		\
-					(unsigned) (addr) + PAGE_SIZE);	\
-		flush_dcache_range((unsigned) (addr),			\
-					(unsigned) (addr) + PAGE_SIZE);	\
-	}								\
-} while (0)
-
-#define copy_from_user_page(vma, page, vaddr, dst, src, len)		\
-do {									\
-	memcpy((dst), (src), (len));					\
-} while (0)
+static inline void copy_to_user_page(struct vm_area_struct *vma,
+				     struct page *page, unsigned long vaddr,
+				     void *dst, void *src, int len)
+{
+	u32 addr = virt_to_phys(dst);
+	memcpy(dst, src, len);
+	if (vma->vm_flags & VM_EXEC) {
+		invalidate_icache_range(addr, addr + PAGE_SIZE);
+		flush_dcache_range(addr, addr + PAGE_SIZE);
+	}
+}
+
+static inline void copy_from_user_page(struct vm_area_struct *vma,
+				       struct page *page, unsigned long vaddr,
+				       void *dst, void *src, int len)
+{
+	memcpy(dst, src, len);
+}
 
 #endif /* _ASM_MICROBLAZE_CACHEFLUSH_H */

arch/microblaze/include/asm/futex.h

@@ -105,7 +105,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 
 	__asm__ __volatile__ ("1:	lwx	%1, %3, r0;		\
 					cmp	%2, %1, %4;		\
-					beqi	%2, 3f;			\
+					bnei	%2, 3f;			\
 				2:	swx	%5, %3, r0;		\
 					addic	%2, r0, 0;		\
 					bnei	%2, 1b;			\

arch/microblaze/include/asm/io.h

@@ -123,11 +123,11 @@ static inline void writel(unsigned int v, volatile void __iomem *addr)
  * inb_p/inw_p/...
  * The macros don't do byte-swapping.
  */
-#define inb(port)		readb((u8 *)((port)))
+#define inb(port)		readb((u8 *)((unsigned long)(port)))
 #define outb(val, port)		writeb((val), (u8 *)((unsigned long)(port)))
-#define inw(port)		readw((u16 *)((port)))
+#define inw(port)		readw((u16 *)((unsigned long)(port)))
 #define outw(val, port)		writew((val), (u16 *)((unsigned long)(port)))
-#define inl(port)		readl((u32 *)((port)))
+#define inl(port)		readl((u32 *)((unsigned long)(port)))
 #define outl(val, port)		writel((val), (u32 *)((unsigned long)(port)))
 
 #define inb_p(port)		inb((port))

arch/microblaze/include/asm/uaccess.h

@@ -99,13 +99,13 @@ static inline int access_ok(int type, const void __user *addr,
 	if ((get_fs().seg < ((unsigned long)addr)) ||
 			(get_fs().seg < ((unsigned long)addr + size - 1))) {
 		pr_debug("ACCESS fail: %s at 0x%08x (size 0x%x), seg 0x%08x\n",
-			type ? "WRITE" : "READ ", (u32)addr, (u32)size,
+			type ? "WRITE" : "READ ", (__force u32)addr, (u32)size,
 			(u32)get_fs().seg);
 		return 0;
 	}
 ok:
 	pr_debug("ACCESS OK: %s at 0x%08x (size 0x%x), seg 0x%08x\n",
-			type ? "WRITE" : "READ ", (u32)addr, (u32)size,
+			type ? "WRITE" : "READ ", (__force u32)addr, (u32)size,
 			(u32)get_fs().seg);
 	return 1;
 }