PCI: Mark Haswell Power Control Unit as having non-compliant BARs

The Haswell Power Control Unit has a non-PCI register (CONFIG_TDP_NOMINAL)
where BAR 0 is supposed to be.  This is erratum HSE43 in the spec update
referenced below:

  The PCIe* Base Specification indicates that Configuration Space Headers
  have a base address register at offset 0x10.  Due to this erratum, the
  Power Control Unit's CONFIG_TDP_NOMINAL CSR (Bus 1; Device 30; Function
  3; Offset 0x10) is located where a base register is expected.

Mark the PCU as having non-compliant BARs so we don't try to probe any of
them.  There are no other BARs on this device.

Rename the quirk so it's not Broadwell-specific.

Link: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-spec-update.html
Link: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-datasheet-vol-2.html (section 5.4, Device 30 Function 3)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=153881Reported-by: NPaul Menzel <pmenzel@molgen.mpg.de>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NMyron Stowe <myron.stowe@redhat.com>

arch/x86/pci/fixup.c

@@ -553,15 +553,21 @@ static void twinhead_reserve_killing_zone(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x27B9, twinhead_reserve_killing_zone);
 
 /*
- * Broadwell EP Home Agent BARs erroneously return non-zero values when read.
+ * Device [8086:2fc0]
+ * Erratum HSE43
+ * CONFIG_TDP_NOMINAL CSR Implemented at Incorrect Offset
+ * http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-spec-update.html
  *
- * See http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v4-spec-update.html
- * entry BDF2.
+ * Devices [8086:6f60,6fa0,6fc0]
+ * Erratum BDF2
+ * PCI BARs in the Home Agent Will Return Non-Zero Values During Enumeration
+ * http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v4-spec-update.html
  */
-static void pci_bdwep_bar(struct pci_dev *dev)
+static void pci_invalid_bar(struct pci_dev *dev)
 {
 	dev->non_compliant_bars = 1;
 }
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6f60, pci_bdwep_bar);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fa0, pci_bdwep_bar);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_bdwep_bar);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2fc0, pci_invalid_bar);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6f60, pci_invalid_bar);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fa0, pci_invalid_bar);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_invalid_bar);