b43: LP-PHY: use new pointers path to access ssb_device

LP-PHY code is SSB specific, add check for bus type.
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/b43/phy_lp.c

@@ -214,7 +214,7 @@ static void lpphy_table_init(struct b43_wldev *dev)
 
 static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev)
 {
-	struct ssb_bus *bus = dev->sdev->bus;
+	struct ssb_bus *bus = dev->dev->sdev->bus;
 	struct ssb_sprom *sprom = dev->dev->bus_sprom;
 	struct b43_phy_lp *lpphy = dev->phy.lp;
 	u16 tmp, tmp2;
@@ -519,7 +519,7 @@ struct b2062_freqdata {
 static void lpphy_2062_init(struct b43_wldev *dev)
 {
 	struct b43_phy_lp *lpphy = dev->phy.lp;
-	struct ssb_bus *bus = dev->sdev->bus;
+	struct ssb_bus *bus = dev->dev->sdev->bus;
 	u32 crystalfreq, tmp, ref;
 	unsigned int i;
 	const struct b2062_freqdata *fd = NULL;
@@ -1289,7 +1289,7 @@ static void lpphy_rev0_1_rc_calib(struct b43_wldev *dev)
 
 static void lpphy_rev2plus_rc_calib(struct b43_wldev *dev)
 {
-	struct ssb_bus *bus = dev->sdev->bus;
+	struct ssb_bus *bus = dev->dev->sdev->bus;
 	u32 crystal_freq = bus->chipco.pmu.crystalfreq * 1000;
 	u8 tmp = b43_radio_read(dev, B2063_RX_BB_SP8) & 0xFF;
 	int i;
@@ -2428,7 +2428,7 @@ static int lpphy_b2062_tune(struct b43_wldev *dev,
 			    unsigned int channel)
 {
 	struct b43_phy_lp *lpphy = dev->phy.lp;
-	struct ssb_bus *bus = dev->sdev->bus;
+	struct ssb_bus *bus = dev->dev->sdev->bus;
 	const struct b206x_channel *chandata = NULL;
 	u32 crystal_freq = bus->chipco.pmu.crystalfreq * 1000;
 	u32 tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7, tmp8, tmp9;
@@ -2518,7 +2518,7 @@ static void lpphy_b2063_vco_calib(struct b43_wldev *dev)
 static int lpphy_b2063_tune(struct b43_wldev *dev,
 			    unsigned int channel)
 {
-	struct ssb_bus *bus = dev->sdev->bus;
+	struct ssb_bus *bus = dev->dev->sdev->bus;
 
 	static const struct b206x_channel *chandata = NULL;
 	u32 crystal_freq = bus->chipco.pmu.crystalfreq * 1000;
@@ -2666,6 +2666,11 @@ static int b43_lpphy_op_init(struct b43_wldev *dev)
 {
 	int err;
 
+	if (dev->dev->bus_type != B43_BUS_SSB) {
+		b43err(dev->wl, "LP-PHY is supported only on SSB!\n");
+		return -EOPNOTSUPP;
+	}
+
 	lpphy_read_band_sprom(dev); //FIXME should this be in prepare_structs?
 	lpphy_baseband_init(dev);
 	lpphy_radio_init(dev);