[POWERPC] bootwrapper: Add a fatal error helper

Add a macro fatal that calls printf then exit.  User must include stdio.h.

Typically replaces 3 lines with 1, although I added back some whitespace.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

arch/powerpc/boot/gunzip_util.c

@@ -52,18 +52,14 @@ void gunzip_start(struct gunzip_state *state, void *src, int srclen)
 		int r, flags;
 
 		state->s.workspace = state->scratch;
-		if (zlib_inflate_workspacesize() > sizeof(state->scratch)) {
-			printf("insufficient scratch space for gunzip\n\r");
-			exit();
-		}
+		if (zlib_inflate_workspacesize() > sizeof(state->scratch))
+			fatal("insufficient scratch space for gunzip\n\r");
 
 		/* skip header */
 		hdrlen = 10;
 		flags = hdr[3];
-		if (hdr[2] != Z_DEFLATED || (flags & RESERVED) != 0) {
-			printf("bad gzipped data\n\r");
-			exit();
-		}
+		if (hdr[2] != Z_DEFLATED || (flags & RESERVED) != 0)
+			fatal("bad gzipped data\n\r");
 		if ((flags & EXTRA_FIELD) != 0)
 			hdrlen = 12 + hdr[10] + (hdr[11] << 8);
 		if ((flags & ORIG_NAME) != 0)
@@ -74,16 +70,12 @@ void gunzip_start(struct gunzip_state *state, void *src, int srclen)
 				;
 		if ((flags & HEAD_CRC) != 0)
 			hdrlen += 2;
-		if (hdrlen >= srclen) {
-			printf("gunzip_start: ran out of data in header\n\r");
-			exit();
-		}
+		if (hdrlen >= srclen)
+			fatal("gunzip_start: ran out of data in header\n\r");
 
 		r = zlib_inflateInit2(&state->s, -MAX_WBITS);
-		if (r != Z_OK) {
-			printf("inflateInit2 returned %d\n\r", r);
-			exit();
-		}
+		if (r != Z_OK)
+			fatal("inflateInit2 returned %d\n\r", r);
 	}
 
 	state->s.next_in = src + hdrlen;
@@ -117,10 +109,8 @@ int gunzip_partial(struct gunzip_state *state, void *dst, int dstlen)
 		state->s.next_out = dst;
 		state->s.avail_out = dstlen;
 		r = zlib_inflate(&state->s, Z_FULL_FLUSH);
-		if (r != Z_OK && r != Z_STREAM_END) {
-			printf("inflate returned %d msg: %s\n\r", r, state->s.msg);
-			exit();
-		}
+		if (r != Z_OK && r != Z_STREAM_END)
+			fatal("inflate returned %d msg: %s\n\r", r, state->s.msg);
 		len = state->s.next_out - (unsigned char *)dst;
 	} else {
 		/* uncompressed image */
@@ -151,10 +141,8 @@ void gunzip_exactly(struct gunzip_state *state, void *dst, int dstlen)
 	int len;
 
 	len  = gunzip_partial(state, dst, dstlen);
-	if (len < dstlen) {
-		printf("gunzip_block: ran out of data\n\r");
-		exit();
-	}
+	if (len < dstlen)
+		fatal("gunzip_block: ran out of data\n\r");
 }
 
 /**

arch/powerpc/boot/main.c

@@ -118,10 +118,9 @@ static struct addr_range prep_kernel(void)
 	gunzip_start(&gzstate, vmlinuz_addr, vmlinuz_size);
 	gunzip_exactly(&gzstate, elfheader, sizeof(elfheader));
 
-	if (!parse_elf64(elfheader, &ei) && !parse_elf32(elfheader, &ei)) {
-		printf("Error: not a valid PPC32 or PPC64 ELF file!\n\r");
-		exit();
-	}
+	if (!parse_elf64(elfheader, &ei) && !parse_elf32(elfheader, &ei))
+		fatal("Error: not a valid PPC32 or PPC64 ELF file!\n\r");
+
 	if (platform_ops.image_hdr)
 		platform_ops.image_hdr(elfheader);
 
@@ -135,11 +134,9 @@ static struct addr_range prep_kernel(void)
 	if (platform_ops.vmlinux_alloc) {
 		addr = platform_ops.vmlinux_alloc(ei.memsize);
 	} else {
-		if ((unsigned long)_start < ei.memsize) {
-			printf("Insufficient memory for kernel at address 0!"
+		if ((unsigned long)_start < ei.memsize)
+			fatal("Insufficient memory for kernel at address 0!"
 			       " (_start=%lx)\n\r", _start);
-			exit();
-		}
 	}
 
 	/* Finally, gunzip the kernel */
@@ -189,11 +186,9 @@ static struct addr_range prep_initrd(struct addr_range vmlinux,
 		printf("Allocating 0x%lx bytes for initrd ...\n\r",
 		       initrd_size);
 		initrd_addr = (unsigned long)malloc(initrd_size);
-		if (! initrd_addr) {
-			printf("Can't allocate memory for initial "
+		if (! initrd_addr)
+			fatal("Can't allocate memory for initial "
 			       "ramdisk !\n\r");
-			exit();
-		}
 		printf("Relocating initrd 0x%p <- 0x%p (0x%lx bytes)\n\r",
 		       initrd_addr, old_addr, initrd_size);
 		memmove((void *)initrd_addr, old_addr, initrd_size);
@@ -203,10 +198,8 @@ static struct addr_range prep_initrd(struct addr_range vmlinux,
 
 	/* Tell the kernel initrd address via device tree */
 	devp = finddevice("/chosen");
-	if (! devp) {
-		printf("Device tree has no chosen node!\n\r");
-		exit();
-	}
+	if (! devp)
+		fatal("Device tree has no chosen node!\n\r");
 
 	initrd_start = (u32)initrd_addr;
 	initrd_end = (u32)initrd_addr + initrd_size;
@@ -303,7 +296,6 @@ void start(void *sp)
 		kentry((unsigned long)initrd.addr, initrd.size,
 		       loader_info.promptr);
 
-	/* console closed so printf below may not work */
-	printf("Error: Linux kernel returned to zImage boot wrapper!\n\r");
-	exit();
+	/* console closed so printf in fatal below may not work */
+	fatal("Error: Linux kernel returned to zImage boot wrapper!\n\r");
 }

arch/powerpc/boot/of.c

@@ -212,10 +212,9 @@ static void *of_vmlinux_alloc(unsigned long size)
 {
 	void *p = malloc(size);
 
-	if (!p) {
-		printf("Can't allocate memory for kernel image!\n\r");
-		exit();
-	}
+	if (!p)
+		fatal("Can't allocate memory for kernel image!\n\r");
+
 	return p;
 }
 

arch/powerpc/boot/ops.h

@@ -158,6 +158,8 @@ static inline void exit(void)
 		platform_ops.exit();
 	for(;;);
 }
+#define fatal(args...) { printf(args); exit(); }
+
 
 #define BSS_STACK(size) \
 	static char _bss_stack[size]; \