提交 6a70cbe2 编写于 作者: R Reka Norman 提交者: sanglipeng

xhci: Apply XHCI_RESET_TO_DEFAULT quirk to ADL-N

stable inclusion
from stable-v5.10.161
commit 9ff7aff40ef5d5d6b271bf94fb0903c5a550f557
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I7P7OH

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=9ff7aff40ef5d5d6b271bf94fb0903c5a550f557

--------------------------------

commit fed70b61 upstream.

ADL-N systems have the same issue as ADL-P, where a large boot firmware
delay is seen if USB ports are left in U3 at shutdown. So apply the
XHCI_RESET_TO_DEFAULT quirk to ADL-N as well.

This patch depends on commit 34cd2db4 ("xhci: Add quirk to reset
host back to default state at shutdown").

The issue it fixes is a ~20s boot time delay when booting from S5. It
affects ADL-N devices, and ADL-N support was added starting from v5.16.

Cc: stable@vger.kernel.org
Signed-off-by: NReka Norman <rekanorman@chromium.org>
Signed-off-by: NMathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221130091944.2171610-3-mathias.nyman@linux.intel.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
上级 6d943580
......@@ -60,6 +60,7 @@
#define PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI 0x9a13
#define PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI 0x1138
#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI 0x51ed
#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_PCH_XHCI 0x54ed
#define PCI_DEVICE_ID_AMD_PROMONTORYA_4 0x43b9
#define PCI_DEVICE_ID_AMD_PROMONTORYA_3 0x43ba
......@@ -243,7 +244,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
xhci->quirks |= XHCI_MISSING_CAS;
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI)
(pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_PCH_XHCI))
xhci->quirks |= XHCI_RESET_TO_DEFAULT;
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册