Merge branch 'Add-Seville-Ethernet-switch-to-T1040RDB'

Vladimir Oltean says:

===================
Add Seville Ethernet switch to T1040RDB

Seville is a DSA switch that is embedded inside the T1040 SoC, and
supported by the mscc_seville DSA driver inside drivers/net/dsa/ocelot.

This series adds this switch to the SoC's dtsi files and to the T1040RDB
board file.

I would like to send this series through net-next. There is no conflict
with other patches submitted to T1040 device tree. Maybe this could at
least get an ACK from devicetree maintainers.
===================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

arch/powerpc/boot/dts/fsl/t1040rdb.dts

@@ -64,6 +64,40 @@
 				phy_sgmii_2: ethernet-phy@3 {
 					reg = <0x03>;
 				};
+
+				/* VSC8514 QSGMII PHY */
+				phy_qsgmii_0: ethernet-phy@4 {
+					reg = <0x4>;
+				};
+
+				phy_qsgmii_1: ethernet-phy@5 {
+					reg = <0x5>;
+				};
+
+				phy_qsgmii_2: ethernet-phy@6 {
+					reg = <0x6>;
+				};
+
+				phy_qsgmii_3: ethernet-phy@7 {
+					reg = <0x7>;
+				};
+
+				/* VSC8514 QSGMII PHY */
+				phy_qsgmii_4: ethernet-phy@8 {
+					reg = <0x8>;
+				};
+
+				phy_qsgmii_5: ethernet-phy@9 {
+					reg = <0x9>;
+				};
+
+				phy_qsgmii_6: ethernet-phy@a {
+					reg = <0xa>;
+				};
+
+				phy_qsgmii_7: ethernet-phy@b {
+					reg = <0xb>;
+				};
 			};
 		};
 	};
@@ -76,3 +110,76 @@
 };
 
 #include "t1040si-post.dtsi"
+
+&seville_switch {
+	status = "okay";
+};
+
+&seville_port0 {
+	managed = "in-band-status";
+	phy-handle = <&phy_qsgmii_0>;
+	phy-mode = "qsgmii";
+	label = "ETH5";
+	status = "okay";
+};
+
+&seville_port1 {
+	managed = "in-band-status";
+	phy-handle = <&phy_qsgmii_1>;
+	phy-mode = "qsgmii";
+	label = "ETH4";
+	status = "okay";
+};
+
+&seville_port2 {
+	managed = "in-band-status";
+	phy-handle = <&phy_qsgmii_2>;
+	phy-mode = "qsgmii";
+	label = "ETH7";
+	status = "okay";
+};
+
+&seville_port3 {
+	managed = "in-band-status";
+	phy-handle = <&phy_qsgmii_3>;
+	phy-mode = "qsgmii";
+	label = "ETH6";
+	status = "okay";
+};
+
+&seville_port4 {
+	managed = "in-band-status";
+	phy-handle = <&phy_qsgmii_4>;
+	phy-mode = "qsgmii";
+	label = "ETH9";
+	status = "okay";
+};
+
+&seville_port5 {
+	managed = "in-band-status";
+	phy-handle = <&phy_qsgmii_5>;
+	phy-mode = "qsgmii";
+	label = "ETH8";
+	status = "okay";
+};
+
+&seville_port6 {
+	managed = "in-band-status";
+	phy-handle = <&phy_qsgmii_6>;
+	phy-mode = "qsgmii";
+	label = "ETH11";
+	status = "okay";
+};
+
+&seville_port7 {
+	managed = "in-band-status";
+	phy-handle = <&phy_qsgmii_7>;
+	phy-mode = "qsgmii";
+	label = "ETH10";
+	status = "okay";
+};
+
+&seville_port8 {
+	ethernet = <&enet0>;
+	status = "okay";
+};

arch/powerpc/boot/dts/fsl/t1040si-post.dtsi

@@ -628,6 +628,84 @@
 			status = "disabled";
 		};
 	};
+
+	seville_switch: ethernet-switch@800000 {
+		compatible = "mscc,vsc9953-switch";
+		reg = <0x800000 0x290000>;
+		interrupts = <26 2 0 0>;
+		interrupt-names = "xtr";
+		little-endian;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			seville_port0: port@0 {
+				reg = <0>;
+				status = "disabled";
+			};
+
+			seville_port1: port@1 {
+				reg = <1>;
+				status = "disabled";
+			};
+
+			seville_port2: port@2 {
+				reg = <2>;
+				status = "disabled";
+			};
+
+			seville_port3: port@3 {
+				reg = <3>;
+				status = "disabled";
+			};
+
+			seville_port4: port@4 {
+				reg = <4>;
+				status = "disabled";
+			};
+
+			seville_port5: port@5 {
+				reg = <5>;
+				status = "disabled";
+			};
+
+			seville_port6: port@6 {
+				reg = <6>;
+				status = "disabled";
+			};
+
+			seville_port7: port@7 {
+				reg = <7>;
+				status = "disabled";
+			};
+
+			seville_port8: port@8 {
+				reg = <8>;
+				phy-mode = "internal";
+				status = "disabled";
+
+				fixed-link {
+					speed = <2500>;
+					full-duplex;
+				};
+			};
+
+			seville_port9: port@9 {
+				reg = <9>;
+				phy-mode = "internal";
+				status = "disabled";
+
+				fixed-link {
+					speed = <2500>;
+					full-duplex;
+				};
+			};
+		};
+	};
 };
 
 &qe {