提交 69daf75a 编写于 作者: B Boris Brezillon 提交者: Michael Turquette

clk: at91: usb: fix at91sam9x5 recalc, round and set rate

First check for rate == 0 in set_rate and round_rate to avoid div by zero.
Then, in order to get the closest rate, round all divisions to the closest
result instead of rounding them down.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>
上级 ff553ea1
......@@ -52,29 +52,26 @@ static unsigned long at91sam9x5_clk_usb_recalc_rate(struct clk_hw *hw,
tmp = pmc_read(pmc, AT91_PMC_USB);
usbdiv = (tmp & AT91_PMC_OHCIUSBDIV) >> SAM9X5_USB_DIV_SHIFT;
return parent_rate / (usbdiv + 1);
return DIV_ROUND_CLOSEST(parent_rate, (usbdiv + 1));
}
static long at91sam9x5_clk_usb_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *parent_rate)
{
unsigned long div;
unsigned long bestrate;
unsigned long tmp;
if (!rate)
return -EINVAL;
if (rate >= *parent_rate)
return *parent_rate;
div = *parent_rate / rate;
if (div >= SAM9X5_USB_MAX_DIV)
return *parent_rate / (SAM9X5_USB_MAX_DIV + 1);
bestrate = *parent_rate / div;
tmp = *parent_rate / (div + 1);
if (bestrate - rate > rate - tmp)
bestrate = tmp;
div = DIV_ROUND_CLOSEST(*parent_rate, rate);
if (div > SAM9X5_USB_MAX_DIV + 1)
div = SAM9X5_USB_MAX_DIV + 1;
return bestrate;
return DIV_ROUND_CLOSEST(*parent_rate, div);
}
static int at91sam9x5_clk_usb_set_parent(struct clk_hw *hw, u8 index)
......@@ -106,9 +103,13 @@ static int at91sam9x5_clk_usb_set_rate(struct clk_hw *hw, unsigned long rate,
u32 tmp;
struct at91sam9x5_clk_usb *usb = to_at91sam9x5_clk_usb(hw);
struct at91_pmc *pmc = usb->pmc;
unsigned long div = parent_rate / rate;
unsigned long div;
if (parent_rate % rate || div < 1 || div >= SAM9X5_USB_MAX_DIV)
if (!rate)
return -EINVAL;
div = DIV_ROUND_CLOSEST(parent_rate, rate);
if (div > SAM9X5_USB_MAX_DIV + 1 || !div)
return -EINVAL;
tmp = pmc_read(pmc, AT91_PMC_USB) & ~AT91_PMC_OHCIUSBDIV;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册