提交 69b07ece 编写于 作者: R Rajendra Nayak 提交者: Chris Ball

mmc: omap_hsmmc: Get rid of omap_hsmmc_1_set_power function

Use omap_hsmmc_235_set_poweri() (now renamed as omap_hsmmc_set_power())
for MMC1 instance as well and get rid of omap_hsmmc_1_set_power()
completely.

omap_hsmmc_235_set_power() seems to be implemented as a superset of
omap_hsmmc_1_set_power() with additional functionality implemented
based on additional checks and hence should just work for MMC1
as well.
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
Tested-by: NVenkatraman S <svenkatr@ti.com>
Tested-by: NBalaji T K <balajitk@ti.com>
Signed-off-by: NChris Ball <cjb@laptop.org>
上级 c2200efb
......@@ -241,28 +241,7 @@ static int omap_hsmmc_resume_cdirq(struct device *dev, int slot)
#ifdef CONFIG_REGULATOR
static int omap_hsmmc_1_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
struct omap_hsmmc_host *host =
platform_get_drvdata(to_platform_device(dev));
int ret;
if (mmc_slot(host).before_set_reg)
mmc_slot(host).before_set_reg(dev, slot, power_on, vdd);
if (power_on)
ret = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd);
else
ret = mmc_regulator_set_ocr(host->mmc, host->vcc, 0);
if (mmc_slot(host).after_set_reg)
mmc_slot(host).after_set_reg(dev, slot, power_on, vdd);
return ret;
}
static int omap_hsmmc_235_set_power(struct device *dev, int slot, int power_on,
static int omap_hsmmc_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
struct omap_hsmmc_host *host =
......@@ -332,14 +311,11 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
switch (host->id) {
case OMAP_MMC1_DEVID:
/* On-chip level shifting via PBIAS0/PBIAS1 */
mmc_slot(host).set_power = omap_hsmmc_1_set_power;
break;
case OMAP_MMC2_DEVID:
case OMAP_MMC3_DEVID:
case OMAP_MMC5_DEVID:
/* Off-chip level shifting, or none */
mmc_slot(host).set_power = omap_hsmmc_235_set_power;
/* On-chip level shifting via PBIAS0/PBIAS1 */
mmc_slot(host).set_power = omap_hsmmc_set_power;
break;
case OMAP_MMC4_DEVID:
mmc_slot(host).set_power = omap_hsmmc_4_set_power;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册