提交 69a2bac8 编写于 作者: G Gabor Juhos 提交者: John W. Linville

rt2x00: rt2x00pci: fix build error on Ralink RT3x5x SoCs

The rt2800pci driver supports the built-in wireless
MAC of the Ralink RT3x5x SoCs. However building the
driver for these SoCs leads to the following error:

    LD      init/built-in.o
  drivers/built-in.o: In function `rt2800pci_rxdone_tasklet':
  <...>/drivers/net/wireless/rt2x00/rt2800pci.c:1012: undefined reference to `rt2x00pci_rxdone'
  drivers/built-in.o:(.rodata+0x4780): undefined reference to `rt2x00pci_initialize'
  drivers/built-in.o:(.rodata+0x4784): undefined reference to `rt2x00pci_uninitialize'
  drivers/built-in.o:(.rodata+0x47bc): undefined reference to `rt2x00pci_flush_queue'
  drivers/built-in.o:(.rodata+0x4818): undefined reference to `rt2x00pci_regbusy_read'
  make[5]: *** [vmlinux] Error 1

The missing functions are provided by the rt2x00pci
module. This module is only selected by the rt2800pci
driver if PCI support is enabled in the kernel, because
some parts of the rt2x00pci code depends on PCI support.

PCI support is not available on the RT3x5x SoCs because
those have no PCI host controller at all.

Move the non PCI specific code from rt2x00pci into a
separate module. This makes it possible to use that
code even if PCI support is disabled. The affected
functions are used by all of the rt2x00 PCI drivers
so select the new module for those drivers.
Signed-off-by: NGabor Juhos <juhosg@openwrt.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 83589b30
......@@ -20,6 +20,7 @@ if RT2X00
config RT2400PCI
tristate "Ralink rt2400 (PCI/PCMCIA) support"
depends on PCI
select RT2X00_LIB_MMIO
select RT2X00_LIB_PCI
select EEPROM_93CX6
---help---
......@@ -31,6 +32,7 @@ config RT2400PCI
config RT2500PCI
tristate "Ralink rt2500 (PCI/PCMCIA) support"
depends on PCI
select RT2X00_LIB_MMIO
select RT2X00_LIB_PCI
select EEPROM_93CX6
---help---
......@@ -43,6 +45,7 @@ config RT61PCI
tristate "Ralink rt2501/rt61 (PCI/PCMCIA) support"
depends on PCI
select RT2X00_LIB_PCI
select RT2X00_LIB_MMIO
select RT2X00_LIB_FIRMWARE
select RT2X00_LIB_CRYPTO
select CRC_ITU_T
......@@ -57,6 +60,7 @@ config RT2800PCI
tristate "Ralink rt27xx/rt28xx/rt30xx (PCI/PCIe/PCMCIA) support"
depends on PCI || SOC_RT288X || SOC_RT305X
select RT2800_LIB
select RT2X00_LIB_MMIO
select RT2X00_LIB_PCI if PCI
select RT2X00_LIB_SOC if SOC_RT288X || SOC_RT305X
select RT2X00_LIB_FIRMWARE
......@@ -185,6 +189,9 @@ endif
config RT2800_LIB
tristate
config RT2X00_LIB_MMIO
tristate
config RT2X00_LIB_PCI
tristate
select RT2X00_LIB
......
......@@ -9,6 +9,7 @@ rt2x00lib-$(CONFIG_RT2X00_LIB_FIRMWARE) += rt2x00firmware.o
rt2x00lib-$(CONFIG_RT2X00_LIB_LEDS) += rt2x00leds.o
obj-$(CONFIG_RT2X00_LIB) += rt2x00lib.o
obj-$(CONFIG_RT2X00_LIB_MMIO) += rt2x00mmio.o
obj-$(CONFIG_RT2X00_LIB_PCI) += rt2x00pci.o
obj-$(CONFIG_RT2X00_LIB_SOC) += rt2x00soc.o
obj-$(CONFIG_RT2X00_LIB_USB) += rt2x00usb.o
......
......@@ -34,6 +34,7 @@
#include <linux/slab.h>
#include "rt2x00.h"
#include "rt2x00mmio.h"
#include "rt2x00pci.h"
#include "rt2400pci.h"
......
......@@ -34,6 +34,7 @@
#include <linux/slab.h>
#include "rt2x00.h"
#include "rt2x00mmio.h"
#include "rt2x00pci.h"
#include "rt2500pci.h"
......
......@@ -41,6 +41,7 @@
#include <linux/eeprom_93cx6.h>
#include "rt2x00.h"
#include "rt2x00mmio.h"
#include "rt2x00pci.h"
#include "rt2x00soc.h"
#include "rt2800lib.h"
......
/*
Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
<http://rt2x00.serialmonkey.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the
Free Software Foundation, Inc.,
59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/*
Module: rt2x00mmio
Abstract: rt2x00 generic mmio device routines.
*/
#include <linux/dma-mapping.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include "rt2x00.h"
#include "rt2x00mmio.h"
/*
* Register access.
*/
int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev,
const unsigned int offset,
const struct rt2x00_field32 field,
u32 *reg)
{
unsigned int i;
if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
return 0;
for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
rt2x00pci_register_read(rt2x00dev, offset, reg);
if (!rt2x00_get_field32(*reg, field))
return 1;
udelay(REGISTER_BUSY_DELAY);
}
printk_once(KERN_ERR "%s() Indirect register access failed: "
"offset=0x%.08x, value=0x%.08x\n", __func__, offset, *reg);
*reg = ~0;
return 0;
}
EXPORT_SYMBOL_GPL(rt2x00pci_regbusy_read);
bool rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev)
{
struct data_queue *queue = rt2x00dev->rx;
struct queue_entry *entry;
struct queue_entry_priv_pci *entry_priv;
struct skb_frame_desc *skbdesc;
int max_rx = 16;
while (--max_rx) {
entry = rt2x00queue_get_entry(queue, Q_INDEX);
entry_priv = entry->priv_data;
if (rt2x00dev->ops->lib->get_entry_state(entry))
break;
/*
* Fill in desc fields of the skb descriptor
*/
skbdesc = get_skb_frame_desc(entry->skb);
skbdesc->desc = entry_priv->desc;
skbdesc->desc_len = entry->queue->desc_size;
/*
* DMA is already done, notify rt2x00lib that
* it finished successfully.
*/
rt2x00lib_dmastart(entry);
rt2x00lib_dmadone(entry);
/*
* Send the frame to rt2x00lib for further processing.
*/
rt2x00lib_rxdone(entry, GFP_ATOMIC);
}
return !max_rx;
}
EXPORT_SYMBOL_GPL(rt2x00pci_rxdone);
void rt2x00pci_flush_queue(struct data_queue *queue, bool drop)
{
unsigned int i;
for (i = 0; !rt2x00queue_empty(queue) && i < 10; i++)
msleep(10);
}
EXPORT_SYMBOL_GPL(rt2x00pci_flush_queue);
/*
* Device initialization handlers.
*/
static int rt2x00pci_alloc_queue_dma(struct rt2x00_dev *rt2x00dev,
struct data_queue *queue)
{
struct queue_entry_priv_pci *entry_priv;
void *addr;
dma_addr_t dma;
unsigned int i;
/*
* Allocate DMA memory for descriptor and buffer.
*/
addr = dma_alloc_coherent(rt2x00dev->dev,
queue->limit * queue->desc_size,
&dma, GFP_KERNEL);
if (!addr)
return -ENOMEM;
memset(addr, 0, queue->limit * queue->desc_size);
/*
* Initialize all queue entries to contain valid addresses.
*/
for (i = 0; i < queue->limit; i++) {
entry_priv = queue->entries[i].priv_data;
entry_priv->desc = addr + i * queue->desc_size;
entry_priv->desc_dma = dma + i * queue->desc_size;
}
return 0;
}
static void rt2x00pci_free_queue_dma(struct rt2x00_dev *rt2x00dev,
struct data_queue *queue)
{
struct queue_entry_priv_pci *entry_priv =
queue->entries[0].priv_data;
if (entry_priv->desc)
dma_free_coherent(rt2x00dev->dev,
queue->limit * queue->desc_size,
entry_priv->desc, entry_priv->desc_dma);
entry_priv->desc = NULL;
}
int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev)
{
struct data_queue *queue;
int status;
/*
* Allocate DMA
*/
queue_for_each(rt2x00dev, queue) {
status = rt2x00pci_alloc_queue_dma(rt2x00dev, queue);
if (status)
goto exit;
}
/*
* Register interrupt handler.
*/
status = request_irq(rt2x00dev->irq,
rt2x00dev->ops->lib->irq_handler,
IRQF_SHARED, rt2x00dev->name, rt2x00dev);
if (status) {
ERROR(rt2x00dev, "IRQ %d allocation failed (error %d).\n",
rt2x00dev->irq, status);
goto exit;
}
return 0;
exit:
queue_for_each(rt2x00dev, queue)
rt2x00pci_free_queue_dma(rt2x00dev, queue);
return status;
}
EXPORT_SYMBOL_GPL(rt2x00pci_initialize);
void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev)
{
struct data_queue *queue;
/*
* Free irq line.
*/
free_irq(rt2x00dev->irq, rt2x00dev);
/*
* Free DMA
*/
queue_for_each(rt2x00dev, queue)
rt2x00pci_free_queue_dma(rt2x00dev, queue);
}
EXPORT_SYMBOL_GPL(rt2x00pci_uninitialize);
/*
* rt2x00mmio module information.
*/
MODULE_AUTHOR(DRV_PROJECT);
MODULE_VERSION(DRV_VERSION);
MODULE_DESCRIPTION("rt2x00 mmio library");
MODULE_LICENSE("GPL");
/*
Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
<http://rt2x00.serialmonkey.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the
Free Software Foundation, Inc.,
59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/*
Module: rt2x00mmio
Abstract: Data structures for the rt2x00mmio module.
*/
#ifndef RT2X00MMIO_H
#define RT2X00MMIO_H
#include <linux/io.h>
/*
* Register access.
*/
static inline void rt2x00pci_register_read(struct rt2x00_dev *rt2x00dev,
const unsigned int offset,
u32 *value)
{
*value = readl(rt2x00dev->csr.base + offset);
}
static inline void rt2x00pci_register_multiread(struct rt2x00_dev *rt2x00dev,
const unsigned int offset,
void *value, const u32 length)
{
memcpy_fromio(value, rt2x00dev->csr.base + offset, length);
}
static inline void rt2x00pci_register_write(struct rt2x00_dev *rt2x00dev,
const unsigned int offset,
u32 value)
{
writel(value, rt2x00dev->csr.base + offset);
}
static inline void rt2x00pci_register_multiwrite(struct rt2x00_dev *rt2x00dev,
const unsigned int offset,
const void *value,
const u32 length)
{
__iowrite32_copy(rt2x00dev->csr.base + offset, value, length >> 2);
}
/**
* rt2x00pci_regbusy_read - Read from register with busy check
* @rt2x00dev: Device pointer, see &struct rt2x00_dev.
* @offset: Register offset
* @field: Field to check if register is busy
* @reg: Pointer to where register contents should be stored
*
* This function will read the given register, and checks if the
* register is busy. If it is, it will sleep for a couple of
* microseconds before reading the register again. If the register
* is not read after a certain timeout, this function will return
* FALSE.
*/
int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev,
const unsigned int offset,
const struct rt2x00_field32 field,
u32 *reg);
/**
* struct queue_entry_priv_pci: Per entry PCI specific information
*
* @desc: Pointer to device descriptor
* @desc_dma: DMA pointer to &desc.
* @data: Pointer to device's entry memory.
* @data_dma: DMA pointer to &data.
*/
struct queue_entry_priv_pci {
__le32 *desc;
dma_addr_t desc_dma;
};
/**
* rt2x00pci_rxdone - Handle RX done events
* @rt2x00dev: Device pointer, see &struct rt2x00_dev.
*
* Returns true if there are still rx frames pending and false if all
* pending rx frames were processed.
*/
bool rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev);
/**
* rt2x00pci_flush_queue - Flush data queue
* @queue: Data queue to stop
* @drop: True to drop all pending frames.
*
* This will wait for a maximum of 100ms, waiting for the queues
* to become empty.
*/
void rt2x00pci_flush_queue(struct data_queue *queue, bool drop);
/*
* Device initialization handlers.
*/
int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev);
void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev);
#endif /* RT2X00MMIO_H */
......@@ -32,182 +32,6 @@
#include "rt2x00.h"
#include "rt2x00pci.h"
/*
* Register access.
*/
int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev,
const unsigned int offset,
const struct rt2x00_field32 field,
u32 *reg)
{
unsigned int i;
if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
return 0;
for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
rt2x00pci_register_read(rt2x00dev, offset, reg);
if (!rt2x00_get_field32(*reg, field))
return 1;
udelay(REGISTER_BUSY_DELAY);
}
printk_once(KERN_ERR "%s() Indirect register access failed: "
"offset=0x%.08x, value=0x%.08x\n", __func__, offset, *reg);
*reg = ~0;
return 0;
}
EXPORT_SYMBOL_GPL(rt2x00pci_regbusy_read);
bool rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev)
{
struct data_queue *queue = rt2x00dev->rx;
struct queue_entry *entry;
struct queue_entry_priv_pci *entry_priv;
struct skb_frame_desc *skbdesc;
int max_rx = 16;
while (--max_rx) {
entry = rt2x00queue_get_entry(queue, Q_INDEX);
entry_priv = entry->priv_data;
if (rt2x00dev->ops->lib->get_entry_state(entry))
break;
/*
* Fill in desc fields of the skb descriptor
*/
skbdesc = get_skb_frame_desc(entry->skb);
skbdesc->desc = entry_priv->desc;
skbdesc->desc_len = entry->queue->desc_size;
/*
* DMA is already done, notify rt2x00lib that
* it finished successfully.
*/
rt2x00lib_dmastart(entry);
rt2x00lib_dmadone(entry);
/*
* Send the frame to rt2x00lib for further processing.
*/
rt2x00lib_rxdone(entry, GFP_ATOMIC);
}
return !max_rx;
}
EXPORT_SYMBOL_GPL(rt2x00pci_rxdone);
void rt2x00pci_flush_queue(struct data_queue *queue, bool drop)
{
unsigned int i;
for (i = 0; !rt2x00queue_empty(queue) && i < 10; i++)
msleep(10);
}
EXPORT_SYMBOL_GPL(rt2x00pci_flush_queue);
/*
* Device initialization handlers.
*/
static int rt2x00pci_alloc_queue_dma(struct rt2x00_dev *rt2x00dev,
struct data_queue *queue)
{
struct queue_entry_priv_pci *entry_priv;
void *addr;
dma_addr_t dma;
unsigned int i;
/*
* Allocate DMA memory for descriptor and buffer.
*/
addr = dma_alloc_coherent(rt2x00dev->dev,
queue->limit * queue->desc_size,
&dma, GFP_KERNEL);
if (!addr)
return -ENOMEM;
memset(addr, 0, queue->limit * queue->desc_size);
/*
* Initialize all queue entries to contain valid addresses.
*/
for (i = 0; i < queue->limit; i++) {
entry_priv = queue->entries[i].priv_data;
entry_priv->desc = addr + i * queue->desc_size;
entry_priv->desc_dma = dma + i * queue->desc_size;
}
return 0;
}
static void rt2x00pci_free_queue_dma(struct rt2x00_dev *rt2x00dev,
struct data_queue *queue)
{
struct queue_entry_priv_pci *entry_priv =
queue->entries[0].priv_data;
if (entry_priv->desc)
dma_free_coherent(rt2x00dev->dev,
queue->limit * queue->desc_size,
entry_priv->desc, entry_priv->desc_dma);
entry_priv->desc = NULL;
}
int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev)
{
struct data_queue *queue;
int status;
/*
* Allocate DMA
*/
queue_for_each(rt2x00dev, queue) {
status = rt2x00pci_alloc_queue_dma(rt2x00dev, queue);
if (status)
goto exit;
}
/*
* Register interrupt handler.
*/
status = request_irq(rt2x00dev->irq,
rt2x00dev->ops->lib->irq_handler,
IRQF_SHARED, rt2x00dev->name, rt2x00dev);
if (status) {
ERROR(rt2x00dev, "IRQ %d allocation failed (error %d).\n",
rt2x00dev->irq, status);
goto exit;
}
return 0;
exit:
queue_for_each(rt2x00dev, queue)
rt2x00pci_free_queue_dma(rt2x00dev, queue);
return status;
}
EXPORT_SYMBOL_GPL(rt2x00pci_initialize);
void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev)
{
struct data_queue *queue;
/*
* Free irq line.
*/
free_irq(rt2x00dev->irq, rt2x00dev);
/*
* Free DMA
*/
queue_for_each(rt2x00dev, queue)
rt2x00pci_free_queue_dma(rt2x00dev, queue);
}
EXPORT_SYMBOL_GPL(rt2x00pci_uninitialize);
/*
* PCI driver handlers.
*/
......
......@@ -35,94 +35,6 @@
*/
#define PCI_DEVICE_DATA(__ops) .driver_data = (kernel_ulong_t)(__ops)
/*
* Register access.
*/
static inline void rt2x00pci_register_read(struct rt2x00_dev *rt2x00dev,
const unsigned int offset,
u32 *value)
{
*value = readl(rt2x00dev->csr.base + offset);
}
static inline void rt2x00pci_register_multiread(struct rt2x00_dev *rt2x00dev,
const unsigned int offset,
void *value, const u32 length)
{
memcpy_fromio(value, rt2x00dev->csr.base + offset, length);
}
static inline void rt2x00pci_register_write(struct rt2x00_dev *rt2x00dev,
const unsigned int offset,
u32 value)
{
writel(value, rt2x00dev->csr.base + offset);
}
static inline void rt2x00pci_register_multiwrite(struct rt2x00_dev *rt2x00dev,
const unsigned int offset,
const void *value,
const u32 length)
{
__iowrite32_copy(rt2x00dev->csr.base + offset, value, length >> 2);
}
/**
* rt2x00pci_regbusy_read - Read from register with busy check
* @rt2x00dev: Device pointer, see &struct rt2x00_dev.
* @offset: Register offset
* @field: Field to check if register is busy
* @reg: Pointer to where register contents should be stored
*
* This function will read the given register, and checks if the
* register is busy. If it is, it will sleep for a couple of
* microseconds before reading the register again. If the register
* is not read after a certain timeout, this function will return
* FALSE.
*/
int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev,
const unsigned int offset,
const struct rt2x00_field32 field,
u32 *reg);
/**
* struct queue_entry_priv_pci: Per entry PCI specific information
*
* @desc: Pointer to device descriptor
* @desc_dma: DMA pointer to &desc.
* @data: Pointer to device's entry memory.
* @data_dma: DMA pointer to &data.
*/
struct queue_entry_priv_pci {
__le32 *desc;
dma_addr_t desc_dma;
};
/**
* rt2x00pci_rxdone - Handle RX done events
* @rt2x00dev: Device pointer, see &struct rt2x00_dev.
*
* Returns true if there are still rx frames pending and false if all
* pending rx frames were processed.
*/
bool rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev);
/**
* rt2x00pci_flush_queue - Flush data queue
* @queue: Data queue to stop
* @drop: True to drop all pending frames.
*
* This will wait for a maximum of 100ms, waiting for the queues
* to become empty.
*/
void rt2x00pci_flush_queue(struct data_queue *queue, bool drop);
/*
* Device initialization handlers.
*/
int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev);
void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev);
/*
* PCI driver handlers.
*/
......
......@@ -35,6 +35,7 @@
#include <linux/eeprom_93cx6.h>
#include "rt2x00.h"
#include "rt2x00mmio.h"
#include "rt2x00pci.h"
#include "rt61pci.h"
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册