提交 6995eb68 编写于 作者: B Bryan Wu 提交者: Greg Kroah-Hartman

USB: musb: enable low level DMA operation for Blackfin

- DMA registers in Blackfin have different layout
- DMA interrupt flags need to be cleared by software
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
上级 2c557a4a
...@@ -34,58 +34,7 @@ ...@@ -34,58 +34,7 @@
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include "musb_core.h" #include "musb_core.h"
#include "musbhsdma.h"
#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
#include "omap2430.h"
#endif
#define MUSB_HSDMA_BASE 0x200
#define MUSB_HSDMA_INTR (MUSB_HSDMA_BASE + 0)
#define MUSB_HSDMA_CONTROL 0x4
#define MUSB_HSDMA_ADDRESS 0x8
#define MUSB_HSDMA_COUNT 0xc
#define MUSB_HSDMA_CHANNEL_OFFSET(_bchannel, _offset) \
(MUSB_HSDMA_BASE + (_bchannel << 4) + _offset)
/* control register (16-bit): */
#define MUSB_HSDMA_ENABLE_SHIFT 0
#define MUSB_HSDMA_TRANSMIT_SHIFT 1
#define MUSB_HSDMA_MODE1_SHIFT 2
#define MUSB_HSDMA_IRQENABLE_SHIFT 3
#define MUSB_HSDMA_ENDPOINT_SHIFT 4
#define MUSB_HSDMA_BUSERROR_SHIFT 8
#define MUSB_HSDMA_BURSTMODE_SHIFT 9
#define MUSB_HSDMA_BURSTMODE (3 << MUSB_HSDMA_BURSTMODE_SHIFT)
#define MUSB_HSDMA_BURSTMODE_UNSPEC 0
#define MUSB_HSDMA_BURSTMODE_INCR4 1
#define MUSB_HSDMA_BURSTMODE_INCR8 2
#define MUSB_HSDMA_BURSTMODE_INCR16 3
#define MUSB_HSDMA_CHANNELS 8
struct musb_dma_controller;
struct musb_dma_channel {
struct dma_channel channel;
struct musb_dma_controller *controller;
u32 start_addr;
u32 len;
u16 max_packet_sz;
u8 idx;
u8 epnum;
u8 transmit;
};
struct musb_dma_controller {
struct dma_controller controller;
struct musb_dma_channel channel[MUSB_HSDMA_CHANNELS];
void *private_data;
void __iomem *base;
u8 channel_count;
u8 used_channels;
u8 irq;
};
static int dma_controller_start(struct dma_controller *c) static int dma_controller_start(struct dma_controller *c)
{ {
...@@ -203,12 +152,8 @@ static void configure_channel(struct dma_channel *channel, ...@@ -203,12 +152,8 @@ static void configure_channel(struct dma_channel *channel,
: 0); : 0);
/* address/count */ /* address/count */
musb_writel(mbase, musb_write_hsdma_addr(mbase, bchannel, dma_addr);
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDRESS), musb_write_hsdma_count(mbase, bchannel, len);
dma_addr);
musb_writel(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT),
len);
/* control (this should start things) */ /* control (this should start things) */
musb_writew(mbase, musb_writew(mbase,
...@@ -279,13 +224,8 @@ static int dma_channel_abort(struct dma_channel *channel) ...@@ -279,13 +224,8 @@ static int dma_channel_abort(struct dma_channel *channel)
musb_writew(mbase, musb_writew(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_CONTROL), MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_CONTROL),
0); 0);
musb_writel(mbase, musb_write_hsdma_addr(mbase, bchannel, 0);
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDRESS), musb_write_hsdma_count(mbase, bchannel, 0);
0);
musb_writel(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT),
0);
channel->status = MUSB_DMA_STATUS_FREE; channel->status = MUSB_DMA_STATUS_FREE;
} }
...@@ -333,10 +273,8 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data) ...@@ -333,10 +273,8 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data)
} else { } else {
u8 devctl; u8 devctl;
addr = musb_readl(mbase, addr = musb_read_hsdma_addr(mbase,
MUSB_HSDMA_CHANNEL_OFFSET( bchannel);
bchannel,
MUSB_HSDMA_ADDRESS));
channel->actual_len = addr channel->actual_len = addr
- musb_channel->start_addr; - musb_channel->start_addr;
...@@ -375,6 +313,12 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data) ...@@ -375,6 +313,12 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data)
} }
} }
} }
#ifdef CONFIG_BLACKFIN
/* Clear DMA interrup flags */
musb_writeb(mbase, MUSB_HSDMA_INTR, int_hsdma);
#endif
retval = IRQ_HANDLED; retval = IRQ_HANDLED;
done: done:
spin_unlock_irqrestore(&musb->lock, flags); spin_unlock_irqrestore(&musb->lock, flags);
......
/*
* MUSB OTG driver - support for Mentor's DMA controller
*
* Copyright 2005 Mentor Graphics Corporation
* Copyright (C) 2005-2007 by Texas Instruments
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
#include "omap2430.h"
#endif
#ifndef CONFIG_BLACKFIN
#define MUSB_HSDMA_BASE 0x200
#define MUSB_HSDMA_INTR (MUSB_HSDMA_BASE + 0)
#define MUSB_HSDMA_CONTROL 0x4
#define MUSB_HSDMA_ADDRESS 0x8
#define MUSB_HSDMA_COUNT 0xc
#define MUSB_HSDMA_CHANNEL_OFFSET(_bchannel, _offset) \
(MUSB_HSDMA_BASE + (_bchannel << 4) + _offset)
#define musb_read_hsdma_addr(mbase, bchannel) \
musb_readl(mbase, \
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDRESS))
#define musb_write_hsdma_addr(mbase, bchannel, addr) \
musb_writel(mbase, \
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDRESS), \
addr)
#define musb_write_hsdma_count(mbase, bchannel, len) \
musb_writel(mbase, \
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT), \
len)
#else
#define MUSB_HSDMA_BASE 0x400
#define MUSB_HSDMA_INTR (MUSB_HSDMA_BASE + 0)
#define MUSB_HSDMA_CONTROL 0x04
#define MUSB_HSDMA_ADDR_LOW 0x08
#define MUSB_HSDMA_ADDR_HIGH 0x0C
#define MUSB_HSDMA_COUNT_LOW 0x10
#define MUSB_HSDMA_COUNT_HIGH 0x14
#define MUSB_HSDMA_CHANNEL_OFFSET(_bchannel, _offset) \
(MUSB_HSDMA_BASE + (_bchannel * 0x20) + _offset)
static inline u32 musb_read_hsdma_addr(void __iomem *mbase, u8 bchannel)
{
u32 addr = musb_readw(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_HIGH));
addr = addr << 16;
addr |= musb_readw(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_LOW));
return addr;
}
static inline void musb_write_hsdma_addr(void __iomem *mbase,
u8 bchannel, dma_addr_t dma_addr)
{
musb_writew(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_LOW),
((u16)((u32) dma_addr & 0xFFFF)));
musb_writew(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_HIGH),
((u16)(((u32) dma_addr >> 16) & 0xFFFF)));
}
static inline void musb_write_hsdma_count(void __iomem *mbase,
u8 bchannel, u32 len)
{
musb_writew(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW),
((u16)((u32) len & 0xFFFF)));
musb_writew(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH),
((u16)(((u32) len >> 16) & 0xFFFF)));
}
#endif /* CONFIG_BLACKFIN */
/* control register (16-bit): */
#define MUSB_HSDMA_ENABLE_SHIFT 0
#define MUSB_HSDMA_TRANSMIT_SHIFT 1
#define MUSB_HSDMA_MODE1_SHIFT 2
#define MUSB_HSDMA_IRQENABLE_SHIFT 3
#define MUSB_HSDMA_ENDPOINT_SHIFT 4
#define MUSB_HSDMA_BUSERROR_SHIFT 8
#define MUSB_HSDMA_BURSTMODE_SHIFT 9
#define MUSB_HSDMA_BURSTMODE (3 << MUSB_HSDMA_BURSTMODE_SHIFT)
#define MUSB_HSDMA_BURSTMODE_UNSPEC 0
#define MUSB_HSDMA_BURSTMODE_INCR4 1
#define MUSB_HSDMA_BURSTMODE_INCR8 2
#define MUSB_HSDMA_BURSTMODE_INCR16 3
#define MUSB_HSDMA_CHANNELS 8
struct musb_dma_controller;
struct musb_dma_channel {
struct dma_channel channel;
struct musb_dma_controller *controller;
u32 start_addr;
u32 len;
u16 max_packet_sz;
u8 idx;
u8 epnum;
u8 transmit;
};
struct musb_dma_controller {
struct dma_controller controller;
struct musb_dma_channel channel[MUSB_HSDMA_CHANNELS];
void *private_data;
void __iomem *base;
u8 channel_count;
u8 used_channels;
u8 irq;
};
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册