提交 69697b6e 编写于 作者: O Or Gerlitz 提交者: David S. Miller

net/mlx5: E-Switch, Add support for the sriov offloads mode

Unlike the legacy mode, here, forwarding rules are not learned by the
driver per events on macs set by VFs/VMs into their vports, but rather
should be programmed by higher-level SW entities.

Saying that, still, in the offloads mode (SRIOV_OFFLOADS), two flow
groups are created by the driver for management (slow path) purposes:

The first group will be used for sending packets over e-switch vports
from the host OS where the e-switch management code runs, to be
received by VFs.

The second group will be used by a miss rule which forwards packets toward
the e-switch manager. Further logic will trap these packets such that
the receiving net-device as seen by the networking stack is the representor
of the vport that sent the packet over the e-switch data-path.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 6ab36e35
......@@ -5,7 +5,7 @@ mlx5_core-y := main.o cmd.o debugfs.o fw.o eq.o uar.o pagealloc.o \
mad.o transobj.o vport.o sriov.o fs_cmd.o fs_core.o \
fs_counters.o rl.o
mlx5_core-$(CONFIG_MLX5_CORE_EN) += wq.o eswitch.o \
mlx5_core-$(CONFIG_MLX5_CORE_EN) += wq.o eswitch.o eswitch_offloads.o \
en_main.o en_fs.o en_ethtool.o en_tx.o en_rx.o \
en_rx_am.o en_txrx.o en_clock.o vxlan.o en_tc.o \
en_arfs.o
......
......@@ -40,17 +40,6 @@
#define UPLINK_VPORT 0xFFFF
#define MLX5_DEBUG_ESWITCH_MASK BIT(3)
#define esw_info(dev, format, ...) \
pr_info("(%s): E-Switch: " format, (dev)->priv.name, ##__VA_ARGS__)
#define esw_warn(dev, format, ...) \
pr_warn("(%s): E-Switch: " format, (dev)->priv.name, ##__VA_ARGS__)
#define esw_debug(dev, format, ...) \
mlx5_core_dbg_mask(dev, MLX5_DEBUG_ESWITCH_MASK, format, ##__VA_ARGS__)
enum {
MLX5_ACTION_NONE = 0,
MLX5_ACTION_ADD = 1,
......@@ -92,6 +81,9 @@ enum {
MC_ADDR_CHANGE | \
PROMISC_CHANGE)
int esw_create_offloads_fdb_table(struct mlx5_eswitch *esw, int nvports);
void esw_destroy_offloads_fdb_table(struct mlx5_eswitch *esw);
static int arm_vport_context_events_cmd(struct mlx5_core_dev *dev, u16 vport,
u32 events_mask)
{
......@@ -578,7 +570,8 @@ static int esw_add_uc_addr(struct mlx5_eswitch *esw, struct vport_addr *vaddr)
if (err)
goto abort;
if (esw->fdb_table.fdb) /* SRIOV is enabled: Forward UC MAC to vport */
/* SRIOV is enabled: Forward UC MAC to vport */
if (esw->fdb_table.fdb && esw->mode == SRIOV_LEGACY)
vaddr->flow_rule = esw_fdb_set_vport_rule(esw, mac, vport);
esw_debug(esw->dev, "\tADDED UC MAC: vport[%d] %pM index:%d fr(%p)\n",
......@@ -1543,7 +1536,7 @@ static void esw_disable_vport(struct mlx5_eswitch *esw, int vport_num)
int mlx5_eswitch_enable_sriov(struct mlx5_eswitch *esw, int nvfs, int mode)
{
int err;
int i;
int i, enabled_events;
if (!esw || !MLX5_CAP_GEN(esw->dev, vport_group_manager) ||
MLX5_CAP_GEN(esw->dev, port_type) != MLX5_CAP_PORT_TYPE_ETH)
......@@ -1562,18 +1555,19 @@ int mlx5_eswitch_enable_sriov(struct mlx5_eswitch *esw, int nvfs, int mode)
esw_warn(esw->dev, "E-Switch engress ACL is not supported by FW\n");
esw_info(esw->dev, "E-Switch enable SRIOV: nvfs(%d) mode (%d)\n", nvfs, mode);
if (mode != SRIOV_LEGACY)
return -EINVAL;
esw->mode = mode;
esw_disable_vport(esw, 0);
err = esw_create_legacy_fdb_table(esw, nvfs + 1);
if (mode == SRIOV_LEGACY)
err = esw_create_legacy_fdb_table(esw, nvfs + 1);
else
err = esw_create_offloads_fdb_table(esw, nvfs + 1);
if (err)
goto abort;
enabled_events = (mode == SRIOV_LEGACY) ? SRIOV_VPORT_EVENTS : UC_ADDR_CHANGE;
for (i = 0; i <= nvfs; i++)
esw_enable_vport(esw, i, SRIOV_VPORT_EVENTS);
esw_enable_vport(esw, i, enabled_events);
esw_info(esw->dev, "SRIOV enabled: active vports(%d)\n",
esw->enabled_vports);
......@@ -1604,7 +1598,10 @@ void mlx5_eswitch_disable_sriov(struct mlx5_eswitch *esw)
if (mc_promisc && mc_promisc->uplink_rule)
mlx5_del_flow_rule(mc_promisc->uplink_rule);
esw_destroy_legacy_fdb_table(esw);
if (esw->mode == SRIOV_LEGACY)
esw_destroy_legacy_fdb_table(esw);
else
esw_destroy_offloads_fdb_table(esw);
esw->mode = SRIOV_NONE;
/* VPORT 0 (PF) must be enabled back with non-sriov configuration */
......
......@@ -140,6 +140,11 @@ struct mlx5_eswitch_fdb {
struct mlx5_flow_group *allmulti_grp;
struct mlx5_flow_group *promisc_grp;
} legacy;
struct offloads_fdb {
struct mlx5_flow_group *send_to_vport_grp;
struct mlx5_flow_group *miss_grp;
} offloads;
};
};
......@@ -188,4 +193,15 @@ int mlx5_eswitch_get_vport_stats(struct mlx5_eswitch *esw,
int vport,
struct ifla_vf_stats *vf_stats);
#define MLX5_DEBUG_ESWITCH_MASK BIT(3)
#define esw_info(dev, format, ...) \
pr_info("(%s): E-Switch: " format, (dev)->priv.name, ##__VA_ARGS__)
#define esw_warn(dev, format, ...) \
pr_warn("(%s): E-Switch: " format, (dev)->priv.name, ##__VA_ARGS__)
#define esw_debug(dev, format, ...) \
mlx5_core_dbg_mask(dev, MLX5_DEBUG_ESWITCH_MASK, format, ##__VA_ARGS__)
#endif /* __MLX5_ESWITCH_H__ */
/*
* Copyright (c) 2016, Mellanox Technologies. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include <linux/etherdevice.h>
#include <linux/mlx5/driver.h>
#include <linux/mlx5/mlx5_ifc.h>
#include <linux/mlx5/vport.h>
#include <linux/mlx5/fs.h>
#include "mlx5_core.h"
#include "eswitch.h"
#define MAX_PF_SQ 256
int esw_create_offloads_fdb_table(struct mlx5_eswitch *esw, int nvports)
{
int inlen = MLX5_ST_SZ_BYTES(create_flow_group_in);
struct mlx5_core_dev *dev = esw->dev;
struct mlx5_flow_namespace *root_ns;
struct mlx5_flow_table *fdb = NULL;
struct mlx5_flow_group *g;
u32 *flow_group_in;
void *match_criteria;
int table_size, ix, err = 0;
flow_group_in = mlx5_vzalloc(inlen);
if (!flow_group_in)
return -ENOMEM;
root_ns = mlx5_get_flow_namespace(dev, MLX5_FLOW_NAMESPACE_FDB);
if (!root_ns) {
esw_warn(dev, "Failed to get FDB flow namespace\n");
goto ns_err;
}
esw_debug(dev, "Create offloads FDB table, log_max_size(%d)\n",
MLX5_CAP_ESW_FLOWTABLE_FDB(dev, log_max_ft_size));
table_size = nvports + MAX_PF_SQ + 1;
fdb = mlx5_create_flow_table(root_ns, 0, table_size, 0);
if (IS_ERR(fdb)) {
err = PTR_ERR(fdb);
esw_warn(dev, "Failed to create FDB Table err %d\n", err);
goto fdb_err;
}
esw->fdb_table.fdb = fdb;
/* create send-to-vport group */
memset(flow_group_in, 0, inlen);
MLX5_SET(create_flow_group_in, flow_group_in, match_criteria_enable,
MLX5_MATCH_MISC_PARAMETERS);
match_criteria = MLX5_ADDR_OF(create_flow_group_in, flow_group_in, match_criteria);
MLX5_SET_TO_ONES(fte_match_param, match_criteria, misc_parameters.source_sqn);
MLX5_SET_TO_ONES(fte_match_param, match_criteria, misc_parameters.source_port);
ix = nvports + MAX_PF_SQ;
MLX5_SET(create_flow_group_in, flow_group_in, start_flow_index, 0);
MLX5_SET(create_flow_group_in, flow_group_in, end_flow_index, ix - 1);
g = mlx5_create_flow_group(fdb, flow_group_in);
if (IS_ERR(g)) {
err = PTR_ERR(g);
esw_warn(dev, "Failed to create send-to-vport flow group err(%d)\n", err);
goto send_vport_err;
}
esw->fdb_table.offloads.send_to_vport_grp = g;
/* create miss group */
memset(flow_group_in, 0, inlen);
MLX5_SET(create_flow_group_in, flow_group_in, match_criteria_enable, 0);
MLX5_SET(create_flow_group_in, flow_group_in, start_flow_index, ix);
MLX5_SET(create_flow_group_in, flow_group_in, end_flow_index, ix + 1);
g = mlx5_create_flow_group(fdb, flow_group_in);
if (IS_ERR(g)) {
err = PTR_ERR(g);
esw_warn(dev, "Failed to create miss flow group err(%d)\n", err);
goto miss_err;
}
esw->fdb_table.offloads.miss_grp = g;
return 0;
miss_err:
mlx5_destroy_flow_group(esw->fdb_table.offloads.send_to_vport_grp);
send_vport_err:
mlx5_destroy_flow_table(fdb);
fdb_err:
ns_err:
kvfree(flow_group_in);
return err;
}
void esw_destroy_offloads_fdb_table(struct mlx5_eswitch *esw)
{
if (!esw->fdb_table.fdb)
return;
esw_debug(esw->dev, "Destroy offloads FDB Table\n");
mlx5_destroy_flow_group(esw->fdb_table.offloads.send_to_vport_grp);
mlx5_destroy_flow_group(esw->fdb_table.offloads.miss_grp);
mlx5_destroy_flow_table(esw->fdb_table.fdb);
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册