提交 6942d81a 编写于 作者: L Linus Torvalds

Merge tag 'staging-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO driver fixes from Greg KH:
 "Here are some small IIO driver fixes and one Staging driver fix for
  5.13-rc2.

  Nothing major, just some resolutions for reported problems:

   - gcc-11 bogus warning fix for rtl8723bs

   - iio driver tiny fixes

  All of these have been in linux-next for many days with no reported
  issues"

* tag 'staging-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: tsl2583: Fix division by a zero lux_val
  iio: core: return ENODEV if ioctl is unknown
  iio: core: fix ioctl handlers removal
  iio: gyro: mpu3050: Fix reported temperature value
  iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGER
  iio: proximity: pulsedlight: Fix rumtime PM imbalance on error
  iio: light: gp2ap002: Fix rumtime PM imbalance on error
  staging: rtl8723bs: avoid bogus gcc warning
......@@ -229,7 +229,6 @@ config DMARD10
config HID_SENSOR_ACCEL_3D
depends on HID_SENSOR_HUB
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
tristate "HID Accelerometers 3D"
......
......@@ -19,6 +19,7 @@ config HID_SENSOR_IIO_TRIGGER
tristate "Common module (trigger) for all HID Sensor IIO drivers"
depends on HID_SENSOR_HUB && HID_SENSOR_IIO_COMMON && IIO_BUFFER
select IIO_TRIGGER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build trigger support for HID sensors.
Triggers will be send if all requested attributes were read.
......
......@@ -111,7 +111,6 @@ config FXAS21002C_SPI
config HID_SENSOR_GYRO_3D
depends on HID_SENSOR_HUB
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
tristate "HID Gyroscope 3D"
......
......@@ -272,7 +272,16 @@ static int mpu3050_read_raw(struct iio_dev *indio_dev,
case IIO_CHAN_INFO_OFFSET:
switch (chan->type) {
case IIO_TEMP:
/* The temperature scaling is (x+23000)/280 Celsius */
/*
* The temperature scaling is (x+23000)/280 Celsius
* for the "best fit straight line" temperature range
* of -30C..85C. The 23000 includes room temperature
* offset of +35C, 280 is the precision scale and x is
* the 16-bit signed integer reported by hardware.
*
* Temperature value itself represents temperature of
* the sensor die.
*/
*val = 23000;
return IIO_VAL_INT;
default:
......@@ -329,7 +338,7 @@ static int mpu3050_read_raw(struct iio_dev *indio_dev,
goto out_read_raw_unlock;
}
*val = be16_to_cpu(raw_val);
*val = (s16)be16_to_cpu(raw_val);
ret = IIO_VAL_INT;
goto out_read_raw_unlock;
......
......@@ -52,7 +52,6 @@ config HID_SENSOR_HUMIDITY
tristate "HID Environmental humidity sensor"
depends on HID_SENSOR_HUB
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
help
......
......@@ -1778,7 +1778,6 @@ static long iio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
if (!indio_dev->info)
goto out_unlock;
ret = -EINVAL;
list_for_each_entry(h, &iio_dev_opaque->ioctl_handlers, entry) {
ret = h->ioctl(indio_dev, filp, cmd, arg);
if (ret != IIO_IOCTL_UNHANDLED)
......@@ -1786,7 +1785,7 @@ static long iio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
}
if (ret == IIO_IOCTL_UNHANDLED)
ret = -EINVAL;
ret = -ENODEV;
out_unlock:
mutex_unlock(&indio_dev->info_exist_lock);
......@@ -1926,9 +1925,6 @@ EXPORT_SYMBOL(__iio_device_register);
**/
void iio_device_unregister(struct iio_dev *indio_dev)
{
struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev);
struct iio_ioctl_handler *h, *t;
cdev_device_del(&indio_dev->chrdev, &indio_dev->dev);
mutex_lock(&indio_dev->info_exist_lock);
......@@ -1939,9 +1935,6 @@ void iio_device_unregister(struct iio_dev *indio_dev)
indio_dev->info = NULL;
list_for_each_entry_safe(h, t, &iio_dev_opaque->ioctl_handlers, entry)
list_del(&h->entry);
iio_device_wakeup_eventset(indio_dev);
iio_buffer_wakeup_poll(indio_dev);
......
......@@ -256,7 +256,6 @@ config ISL29125
config HID_SENSOR_ALS
depends on HID_SENSOR_HUB
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
tristate "HID ALS"
......@@ -270,7 +269,6 @@ config HID_SENSOR_ALS
config HID_SENSOR_PROX
depends on HID_SENSOR_HUB
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
tristate "HID PROX"
......
......@@ -582,7 +582,7 @@ static int gp2ap002_probe(struct i2c_client *client,
"gp2ap002", indio_dev);
if (ret) {
dev_err(dev, "unable to request IRQ\n");
goto out_disable_vio;
goto out_put_pm;
}
gp2ap002->irq = client->irq;
......@@ -612,8 +612,9 @@ static int gp2ap002_probe(struct i2c_client *client,
return 0;
out_disable_pm:
out_put_pm:
pm_runtime_put_noidle(dev);
out_disable_pm:
pm_runtime_disable(dev);
out_disable_vio:
regulator_disable(gp2ap002->vio);
......
......@@ -341,6 +341,14 @@ static int tsl2583_als_calibrate(struct iio_dev *indio_dev)
return lux_val;
}
/* Avoid division by zero of lux_value later on */
if (lux_val == 0) {
dev_err(&chip->client->dev,
"%s: lux_val of 0 will produce out of range trim_value\n",
__func__);
return -ENODATA;
}
gain_trim_val = (unsigned int)(((chip->als_settings.als_cal_target)
* chip->als_settings.als_gain_trim) / lux_val);
if ((gain_trim_val < 250) || (gain_trim_val > 4000)) {
......
......@@ -95,7 +95,6 @@ config MAG3110
config HID_SENSOR_MAGNETOMETER_3D
depends on HID_SENSOR_HUB
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
tristate "HID Magenetometer 3D"
......
......@@ -9,7 +9,6 @@ menu "Inclinometer sensors"
config HID_SENSOR_INCLINOMETER_3D
depends on HID_SENSOR_HUB
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
tristate "HID Inclinometer 3D"
......@@ -20,7 +19,6 @@ config HID_SENSOR_INCLINOMETER_3D
config HID_SENSOR_DEVICE_ROTATION
depends on HID_SENSOR_HUB
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
tristate "HID Device Rotation"
......
......@@ -79,7 +79,6 @@ config DPS310
config HID_SENSOR_PRESS
depends on HID_SENSOR_HUB
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
tristate "HID PRESS"
......
......@@ -160,6 +160,7 @@ static int lidar_get_measurement(struct lidar_data *data, u16 *reg)
ret = lidar_write_control(data, LIDAR_REG_CONTROL_ACQUIRE);
if (ret < 0) {
dev_err(&client->dev, "cannot send start measurement command");
pm_runtime_put_noidle(&client->dev);
return ret;
}
......
......@@ -45,7 +45,6 @@ config HID_SENSOR_TEMP
tristate "HID Environmental temperature sensor"
depends on HID_SENSOR_HUB
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
help
......
......@@ -527,6 +527,9 @@ static int rtw_cfg80211_ap_set_encryption(struct net_device *dev, struct ieee_pa
struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
struct security_priv *psecuritypriv = &(padapter->securitypriv);
struct sta_priv *pstapriv = &padapter->stapriv;
char *grpkey = padapter->securitypriv.dot118021XGrpKey[param->u.crypt.idx].skey;
char *txkey = padapter->securitypriv.dot118021XGrptxmickey[param->u.crypt.idx].skey;
char *rxkey = padapter->securitypriv.dot118021XGrprxmickey[param->u.crypt.idx].skey;
param->u.crypt.err = 0;
param->u.crypt.alg[IEEE_CRYPT_ALG_NAME_LEN - 1] = '\0';
......@@ -609,7 +612,7 @@ static int rtw_cfg80211_ap_set_encryption(struct net_device *dev, struct ieee_pa
{
if (strcmp(param->u.crypt.alg, "WEP") == 0)
{
memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey, param->u.crypt.key, (param->u.crypt.key_len > 16 ? 16 : param->u.crypt.key_len));
memcpy(grpkey, param->u.crypt.key, (param->u.crypt.key_len > 16 ? 16 : param->u.crypt.key_len));
psecuritypriv->dot118021XGrpPrivacy = _WEP40_;
if (param->u.crypt.key_len == 13)
......@@ -622,12 +625,12 @@ static int rtw_cfg80211_ap_set_encryption(struct net_device *dev, struct ieee_pa
{
psecuritypriv->dot118021XGrpPrivacy = _TKIP_;
memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey, param->u.crypt.key, (param->u.crypt.key_len > 16 ? 16 : param->u.crypt.key_len));
memcpy(grpkey, param->u.crypt.key, (param->u.crypt.key_len > 16 ? 16 : param->u.crypt.key_len));
/* DEBUG_ERR("set key length :param->u.crypt.key_len =%d\n", param->u.crypt.key_len); */
/* set mic key */
memcpy(psecuritypriv->dot118021XGrptxmickey[param->u.crypt.idx].skey, &(param->u.crypt.key[16]), 8);
memcpy(psecuritypriv->dot118021XGrprxmickey[param->u.crypt.idx].skey, &(param->u.crypt.key[24]), 8);
memcpy(txkey, &(param->u.crypt.key[16]), 8);
memcpy(rxkey, &(param->u.crypt.key[24]), 8);
psecuritypriv->busetkipkey = true;
......@@ -636,7 +639,7 @@ static int rtw_cfg80211_ap_set_encryption(struct net_device *dev, struct ieee_pa
{
psecuritypriv->dot118021XGrpPrivacy = _AES_;
memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey, param->u.crypt.key, (param->u.crypt.key_len > 16 ? 16 : param->u.crypt.key_len));
memcpy(grpkey, param->u.crypt.key, (param->u.crypt.key_len > 16 ? 16 : param->u.crypt.key_len));
}
else
{
......@@ -713,7 +716,7 @@ static int rtw_cfg80211_ap_set_encryption(struct net_device *dev, struct ieee_pa
{
if (strcmp(param->u.crypt.alg, "WEP") == 0)
{
memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey, param->u.crypt.key, (param->u.crypt.key_len > 16 ? 16 : param->u.crypt.key_len));
memcpy(grpkey, param->u.crypt.key, (param->u.crypt.key_len > 16 ? 16 : param->u.crypt.key_len));
psecuritypriv->dot118021XGrpPrivacy = _WEP40_;
if (param->u.crypt.key_len == 13)
......@@ -725,12 +728,12 @@ static int rtw_cfg80211_ap_set_encryption(struct net_device *dev, struct ieee_pa
{
psecuritypriv->dot118021XGrpPrivacy = _TKIP_;
memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey, param->u.crypt.key, (param->u.crypt.key_len > 16 ? 16 : param->u.crypt.key_len));
memcpy(grpkey, param->u.crypt.key, (param->u.crypt.key_len > 16 ? 16 : param->u.crypt.key_len));
/* DEBUG_ERR("set key length :param->u.crypt.key_len =%d\n", param->u.crypt.key_len); */
/* set mic key */
memcpy(psecuritypriv->dot118021XGrptxmickey[param->u.crypt.idx].skey, &(param->u.crypt.key[16]), 8);
memcpy(psecuritypriv->dot118021XGrprxmickey[param->u.crypt.idx].skey, &(param->u.crypt.key[24]), 8);
memcpy(txkey, &(param->u.crypt.key[16]), 8);
memcpy(rxkey, &(param->u.crypt.key[24]), 8);
psecuritypriv->busetkipkey = true;
......@@ -739,7 +742,7 @@ static int rtw_cfg80211_ap_set_encryption(struct net_device *dev, struct ieee_pa
{
psecuritypriv->dot118021XGrpPrivacy = _AES_;
memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey, param->u.crypt.key, (param->u.crypt.key_len > 16 ? 16 : param->u.crypt.key_len));
memcpy(grpkey, param->u.crypt.key, (param->u.crypt.key_len > 16 ? 16 : param->u.crypt.key_len));
}
else
{
......
......@@ -2963,6 +2963,9 @@ static int rtw_set_encryption(struct net_device *dev, struct ieee_param *param,
struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
struct security_priv *psecuritypriv = &(padapter->securitypriv);
struct sta_priv *pstapriv = &padapter->stapriv;
char *txkey = padapter->securitypriv.dot118021XGrptxmickey[param->u.crypt.idx].skey;
char *rxkey = padapter->securitypriv.dot118021XGrprxmickey[param->u.crypt.idx].skey;
char *grpkey = psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey;
param->u.crypt.err = 0;
param->u.crypt.alg[IEEE_CRYPT_ALG_NAME_LEN - 1] = '\0';
......@@ -3064,7 +3067,7 @@ static int rtw_set_encryption(struct net_device *dev, struct ieee_param *param,
if (!psta && check_fwstate(pmlmepriv, WIFI_AP_STATE)) { /* group key */
if (param->u.crypt.set_tx == 1) {
if (strcmp(param->u.crypt.alg, "WEP") == 0) {
memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey, param->u.crypt.key, (param->u.crypt.key_len > 16 ? 16 : param->u.crypt.key_len));
memcpy(grpkey, param->u.crypt.key, (param->u.crypt.key_len > 16 ? 16 : param->u.crypt.key_len));
psecuritypriv->dot118021XGrpPrivacy = _WEP40_;
if (param->u.crypt.key_len == 13)
......@@ -3073,11 +3076,11 @@ static int rtw_set_encryption(struct net_device *dev, struct ieee_param *param,
} else if (strcmp(param->u.crypt.alg, "TKIP") == 0) {
psecuritypriv->dot118021XGrpPrivacy = _TKIP_;
memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey, param->u.crypt.key, (param->u.crypt.key_len > 16 ? 16 : param->u.crypt.key_len));
memcpy(grpkey, param->u.crypt.key, (param->u.crypt.key_len > 16 ? 16 : param->u.crypt.key_len));
/* DEBUG_ERR("set key length :param->u.crypt.key_len =%d\n", param->u.crypt.key_len); */
/* set mic key */
memcpy(psecuritypriv->dot118021XGrptxmickey[param->u.crypt.idx].skey, &(param->u.crypt.key[16]), 8);
memcpy(txkey, &(param->u.crypt.key[16]), 8);
memcpy(psecuritypriv->dot118021XGrprxmickey[param->u.crypt.idx].skey, &(param->u.crypt.key[24]), 8);
psecuritypriv->busetkipkey = true;
......@@ -3086,7 +3089,7 @@ static int rtw_set_encryption(struct net_device *dev, struct ieee_param *param,
else if (strcmp(param->u.crypt.alg, "CCMP") == 0) {
psecuritypriv->dot118021XGrpPrivacy = _AES_;
memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey, param->u.crypt.key, (param->u.crypt.key_len > 16 ? 16 : param->u.crypt.key_len));
memcpy(grpkey, param->u.crypt.key, (param->u.crypt.key_len > 16 ? 16 : param->u.crypt.key_len));
} else {
psecuritypriv->dot118021XGrpPrivacy = _NO_PRIVACY_;
}
......@@ -3142,7 +3145,7 @@ static int rtw_set_encryption(struct net_device *dev, struct ieee_param *param,
} else { /* group key??? */
if (strcmp(param->u.crypt.alg, "WEP") == 0) {
memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey, param->u.crypt.key, (param->u.crypt.key_len > 16 ? 16 : param->u.crypt.key_len));
memcpy(grpkey, param->u.crypt.key, (param->u.crypt.key_len > 16 ? 16 : param->u.crypt.key_len));
psecuritypriv->dot118021XGrpPrivacy = _WEP40_;
if (param->u.crypt.key_len == 13)
......@@ -3150,19 +3153,19 @@ static int rtw_set_encryption(struct net_device *dev, struct ieee_param *param,
} else if (strcmp(param->u.crypt.alg, "TKIP") == 0) {
psecuritypriv->dot118021XGrpPrivacy = _TKIP_;
memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey, param->u.crypt.key, (param->u.crypt.key_len > 16 ? 16 : param->u.crypt.key_len));
memcpy(grpkey, param->u.crypt.key, (param->u.crypt.key_len > 16 ? 16 : param->u.crypt.key_len));
/* DEBUG_ERR("set key length :param->u.crypt.key_len =%d\n", param->u.crypt.key_len); */
/* set mic key */
memcpy(psecuritypriv->dot118021XGrptxmickey[param->u.crypt.idx].skey, &(param->u.crypt.key[16]), 8);
memcpy(psecuritypriv->dot118021XGrprxmickey[param->u.crypt.idx].skey, &(param->u.crypt.key[24]), 8);
memcpy(txkey, &(param->u.crypt.key[16]), 8);
memcpy(rxkey, &(param->u.crypt.key[24]), 8);
psecuritypriv->busetkipkey = true;
} else if (strcmp(param->u.crypt.alg, "CCMP") == 0) {
psecuritypriv->dot118021XGrpPrivacy = _AES_;
memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey, param->u.crypt.key, (param->u.crypt.key_len > 16 ? 16 : param->u.crypt.key_len));
memcpy(grpkey, param->u.crypt.key, (param->u.crypt.key_len > 16 ? 16 : param->u.crypt.key_len));
} else {
psecuritypriv->dot118021XGrpPrivacy = _NO_PRIVACY_;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册