pktgen: Specify num packets per thread

Use -n <num>, to specify the number of packets every
thread sends.
Zero means indefinitely.
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

samples/pktgen/README.rst

@@ -22,6 +22,7 @@ across the sample scripts.  Usage example is printed on errors::
   -m : ($DST_MAC)   destination MAC-addr
   -t : ($THREADS)   threads to start
   -c : ($SKB_CLONE) SKB clones send before alloc new SKB
+  -n : ($COUNT)     num messages to send per thread, 0 means indefinitely
   -b : ($BURST)     HW level bursting of SKBs
   -v : ($VERBOSE)   verbose
   -x : ($DEBUG)     debug

samples/pktgen/parameters.sh

@@ -11,6 +11,7 @@ function usage() {
     echo "  -m : (\$DST_MAC)   destination MAC-addr"
     echo "  -t : (\$THREADS)   threads to start"
     echo "  -c : (\$SKB_CLONE) SKB clones send before alloc new SKB"
+    echo "  -n : (\$COUNT)     num messages to send per thread, 0 means indefinitely"
     echo "  -b : (\$BURST)     HW level bursting of SKBs"
     echo "  -v : (\$VERBOSE)   verbose"
     echo "  -x : (\$DEBUG)     debug"
@@ -20,7 +21,7 @@ function usage() {
 
 ##  --- Parse command line arguments / parameters ---
 ## echo "Commandline options:"
-while getopts "s:i:d:m:t:c:b:vxh6" option; do
+while getopts "s:i:d:m:t:c:n:b:vxh6" option; do
     case $option in
         i) # interface
           export DEV=$OPTARG
@@ -48,6 +49,10 @@ while getopts "s:i:d:m:t:c:b:vxh6" option; do
 	  export CLONE_SKB=$OPTARG
 	  info "CLONE_SKB=$CLONE_SKB"
           ;;
+        n)
+	  export COUNT=$OPTARG
+	  info "COUNT=$COUNT"
+          ;;
         b)
 	  export BURST=$OPTARG
 	  info "SKB bursting: BURST=$BURST"

samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh

@@ -39,10 +39,10 @@ if [ -z "$DEST_IP" ]; then
 fi
 [ -z "$DST_MAC" ] && DST_MAC="90:e2:ba:ff:ff:ff"
 [ -z "$BURST" ] && BURST=1024
+[ -z "$COUNT" ] && COUNT="10000000" # Zero means indefinitely
 
 # Base Config
 DELAY="0"        # Zero means max speed
-COUNT="10000000" # Zero means indefinitely
 
 # General cleanup everything since last run
 pg_ctrl "reset"

samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh

@@ -22,10 +22,10 @@ fi
 if [[ -n "$BURST" ]]; then
     err 1 "Bursting not supported for this mode"
 fi
+[ -z "$COUNT" ] && COUNT="10000000" # Zero means indefinitely
 
 # Base Config
 DELAY="0"        # Zero means max speed
-COUNT="10000000" # Zero means indefinitely
 
 # General cleanup everything since last run
 pg_ctrl "reset"

samples/pktgen/pktgen_sample01_simple.sh

@@ -20,10 +20,10 @@ fi
 [ -z "$CLONE_SKB" ] && CLONE_SKB="0"
 # Example enforce param "-m" for dst_mac
 [ -z "$DST_MAC" ] && usage && err 2 "Must specify -m dst_mac"
+[ -z "$COUNT" ]   && COUNT="100000" # Zero means indefinitely
 
 # Base Config
 DELAY="0"        # Zero means max speed
-COUNT="100000"   # Zero means indefinitely
 
 # Flow variation random source port between min and max
 UDP_MIN=9

samples/pktgen/pktgen_sample02_multiqueue.sh

@@ -13,9 +13,10 @@ root_check_run_with_sudo "$@"
 # Required param: -i dev in $DEV
 source ${basedir}/parameters.sh
 
+[ -z "$COUNT" ] && COUNT="100000" # Zero means indefinitely
+
 # Base Config
 DELAY="0"        # Zero means max speed
-COUNT="100000"   # Zero means indefinitely
 [ -z "$CLONE_SKB" ] && CLONE_SKB="0"
 
 # Flow variation random source port between min and max

samples/pktgen/pktgen_sample03_burst_single_flow.sh

@@ -31,10 +31,10 @@ fi
 [ -z "$DST_MAC" ]   && DST_MAC="90:e2:ba:ff:ff:ff"
 [ -z "$BURST" ]     && BURST=32
 [ -z "$CLONE_SKB" ] && CLONE_SKB="100000"
+[ -z "$COUNT" ]     && COUNT="0" # Zero means indefinitely
 
 # Base Config
 DELAY="0"  # Zero means max speed
-COUNT="0"  # Zero means indefinitely
 
 # General cleanup everything since last run
 pg_ctrl "reset"

samples/pktgen/pktgen_sample04_many_flows.sh

@@ -15,6 +15,7 @@ source ${basedir}/parameters.sh
 [ -z "$DEST_IP" ]   && DEST_IP="198.18.0.42"
 [ -z "$DST_MAC" ]   && DST_MAC="90:e2:ba:ff:ff:ff"
 [ -z "$CLONE_SKB" ] && CLONE_SKB="0"
+[ -z "$COUNT" ]     && COUNT="0" # Zero means indefinitely
 
 # NOTICE:  Script specific settings
 # =======
@@ -26,7 +27,6 @@ source ${basedir}/parameters.sh
 
 # Base Config
 DELAY="0"  # Zero means max speed
-COUNT="0"  # Zero means indefinitely
 
 if [[ -n "$BURST" ]]; then
     err 1 "Bursting not supported for this mode"

samples/pktgen/pktgen_sample05_flow_per_thread.sh

@@ -20,11 +20,11 @@ source ${basedir}/parameters.sh
 [ -z "$DST_MAC" ]   && DST_MAC="90:e2:ba:ff:ff:ff"
 [ -z "$CLONE_SKB" ] && CLONE_SKB="0"
 [ -z "$BURST" ]     && BURST=32
+[ -z "$COUNT" ]     && COUNT="0" # Zero means indefinitely
 
 
 # Base Config
 DELAY="0"  # Zero means max speed
-COUNT="0"  # Zero means indefinitely
 
 # General cleanup everything since last run
 pg_ctrl "reset"