提交 68ff0423 编写于 作者: A Adrian Hunter 提交者: Tony Lindgren

omap: Rename hsmmc symbols to reflect independence from twl4030

hsmmc.[ch] no longer has any dependency on twl4030
and variable names should be renamed to reflect that.
Signed-off-by: NAdrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
上级 d02a900b
......@@ -182,7 +182,7 @@ static int __init omap2430_i2c_init(void)
return 0;
}
static struct twl4030_hsmmc_info mmc[] __initdata = {
static struct omap2_hsmmc_info mmc[] __initdata = {
{
.mmc = 1,
.wires = 4,
......@@ -201,7 +201,7 @@ static void __init omap_2430sdp_init(void)
platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
omap_serial_init();
twl4030_mmc_init(mmc);
omap2_hsmmc_init(mmc);
usb_musb_init();
board_smc91x_init();
......
......@@ -328,7 +328,7 @@ static struct twl4030_bci_platform_data sdp3430_bci_data = {
.tblsize = ARRAY_SIZE(sdp3430_batt_table),
};
static struct twl4030_hsmmc_info mmc[] = {
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
/* 8 bits (default) requires S6.3 == ON,
......@@ -365,7 +365,7 @@ static int sdp3430_twl_gpio_setup(struct device *dev,
*/
mmc[0].gpio_cd = gpio + 0;
mmc[1].gpio_cd = gpio + 1;
twl4030_mmc_init(mmc);
omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters ... we "know" the
* regulators will be set up only *after* we return.
......
......@@ -593,7 +593,7 @@ static struct twl4030_keypad_data cm_t35_kp_data = {
.rep = 1,
};
static struct twl4030_hsmmc_info mmc[] = {
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.wires = 4,
......@@ -642,7 +642,7 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
twl4030_mmc_init(mmc);
omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters */
cm_t35_vmmc1_supply.dev = mmc[0].dev;
......
......@@ -121,7 +121,7 @@ static struct regulator_init_data igep2_vmmc1 = {
.consumer_supplies = &igep2_vmmc1_supply,
};
static struct twl4030_hsmmc_info mmc[] = {
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.wires = 4,
......@@ -142,7 +142,7 @@ static int igep2_twl_gpio_setup(struct device *dev,
{
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
twl4030_mmc_init(mmc);
omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters ... we "know" the
* regulators will be set up only *after* we return.
......
......@@ -359,7 +359,7 @@ static int __init omap_i2c_init(void)
return 0;
}
static struct twl4030_hsmmc_info mmc[] __initdata = {
static struct omap2_hsmmc_info mmc[] __initdata = {
{
.mmc = 1,
.wires = 4,
......@@ -396,7 +396,7 @@ static void __init omap_ldp_init(void)
omap_serial_init();
usb_musb_init();
twl4030_mmc_init(mmc);
omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters */
ldp_vmmc1_supply.dev = mmc[0].dev;
}
......
......@@ -108,7 +108,7 @@ static struct platform_device omap3beagle_nand_device = {
#include "sdram-micron-mt46h32m32lf-6.h"
static struct twl4030_hsmmc_info mmc[] = {
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.wires = 8,
......@@ -147,7 +147,7 @@ static int beagle_twl_gpio_setup(struct device *dev,
}
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
twl4030_mmc_init(mmc);
omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters */
beagle_vmmc1_supply.dev = mmc[0].dev;
......
......@@ -367,7 +367,7 @@ static struct regulator_init_data omap3evm_vsim = {
.consumer_supplies = &omap3evm_vsim_supply,
};
static struct twl4030_hsmmc_info mmc[] = {
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.wires = 4,
......@@ -407,7 +407,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
omap_mux_init_gpio(63, OMAP_PIN_INPUT);
mmc[0].gpio_cd = gpio + 0;
twl4030_mmc_init(mmc);
omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters */
omap3evm_vmmc1_supply.dev = mmc[0].dev;
......
......@@ -192,7 +192,7 @@ static struct twl4030_keypad_data pandora_kp_data = {
.rep = 1,
};
static struct twl4030_hsmmc_info omap3pandora_mmc[] = {
static struct omap2_hsmmc_info omap3pandora_mmc[] = {
{
.mmc = 1,
.wires = 4,
......@@ -231,7 +231,7 @@ static int omap3pandora_twl_gpio_setup(struct device *dev,
/* gpio + {0,1} is "mmc{0,1}_cd" (input/IRQ) */
omap3pandora_mmc[0].gpio_cd = gpio + 0;
omap3pandora_mmc[1].gpio_cd = gpio + 1;
twl4030_mmc_init(omap3pandora_mmc);
omap2_hsmmc_init(omap3pandora_mmc);
/* link regulators to MMC adapters */
pandora_vmmc1_supply.dev = omap3pandora_mmc[0].dev;
......
......@@ -122,7 +122,7 @@ static struct platform_device omap3touchbook_nand_device = {
#include "sdram-micron-mt46h32m32lf-6.h"
static struct twl4030_hsmmc_info mmc[] = {
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.wires = 8,
......@@ -161,7 +161,7 @@ static int touchbook_twl_gpio_setup(struct device *dev,
}
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
twl4030_mmc_init(mmc);
omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters */
touchbook_vmmc1_supply.dev = mmc[0].dev;
......
......@@ -272,7 +272,7 @@ static void __init overo_flash_init(void)
}
}
static struct twl4030_hsmmc_info mmc[] = {
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.wires = 4,
......@@ -297,7 +297,7 @@ static struct regulator_consumer_supply overo_vmmc1_supply = {
static int overo_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
twl4030_mmc_init(mmc);
omap2_hsmmc_init(mmc);
overo_vmmc1_supply.dev = mmc[0].dev;
......
......@@ -209,7 +209,7 @@ static struct twl4030_madc_platform_data rx51_madc_data = {
.irq_line = 1,
};
static struct twl4030_hsmmc_info mmc[] = {
static struct omap2_hsmmc_info mmc[] __initdata = {
{
.name = "external",
.mmc = 1,
......@@ -232,15 +232,18 @@ static struct twl4030_hsmmc_info mmc[] = {
};
static struct regulator_consumer_supply rx51_vmmc1_supply = {
.supply = "vmmc",
.supply = "vmmc",
.dev_name = "mmci-omap-hs.0",
};
static struct regulator_consumer_supply rx51_vmmc2_supply = {
.supply = "vmmc",
.supply = "vmmc",
.dev_name = "mmci-omap-hs.1",
};
static struct regulator_consumer_supply rx51_vsim_supply = {
.supply = "vmmc_aux",
.supply = "vmmc_aux",
.dev_name = "mmci-omap-hs.1",
};
static struct regulator_init_data rx51_vaux1 = {
......@@ -375,12 +378,6 @@ static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
gpio_request(gpio + 7, "speaker_en");
gpio_direction_output(gpio + 7, 1);
/* set up MMC adapters, linking their regulators to them */
twl4030_mmc_init(mmc);
rx51_vmmc1_supply.dev = mmc[0].dev;
rx51_vmmc2_supply.dev = mmc[1].dev;
rx51_vsim_supply.dev = mmc[1].dev;
return 0;
}
......@@ -751,5 +748,6 @@ void __init rx51_peripherals_init(void)
rx51_init_wl1251();
spi_register_board_info(rx51_peripherals_spi_board_info,
ARRAY_SIZE(rx51_peripherals_spi_board_info));
omap2_hsmmc_init(mmc);
}
......@@ -150,7 +150,7 @@ static struct regulator_init_data zoom_vsim = {
.consumer_supplies = &zoom_vsim_supply,
};
static struct twl4030_hsmmc_info mmc[] __initdata = {
static struct omap2_hsmmc_info mmc[] __initdata = {
{
.name = "external",
.mmc = 1,
......@@ -175,7 +175,7 @@ static int zoom_twl_gpio_setup(struct device *dev,
{
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
twl4030_mmc_init(mmc);
omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters ... we "know" the
* regulators will be set up only *after* we return.
......
......@@ -26,20 +26,20 @@ static u16 control_devconf1_offset;
#define HSMMC_NAME_LEN 9
static struct twl_mmc_controller {
static struct hsmmc_controller {
char name[HSMMC_NAME_LEN + 1];
} hsmmc[OMAP34XX_NR_MMC];
#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
static int twl4030_mmc_get_context_loss(struct device *dev)
static int hsmmc_get_context_loss(struct device *dev)
{
/* FIXME: PM DPS not implemented yet */
return 0;
}
#else
#define twl4030_mmc_get_context_loss NULL
#define hsmmc_get_context_loss NULL
#endif
static void hsmmc1_before_set_reg(struct device *dev, int slot,
......@@ -135,9 +135,9 @@ static void hsmmc23_before_set_reg(struct device *dev, int slot,
static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;
void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
{
struct twl4030_hsmmc_info *c;
struct omap2_hsmmc_info *c;
int nr_hsmmc = ARRAY_SIZE(hsmmc_data);
int i;
......@@ -150,7 +150,7 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
}
for (c = controllers; c->mmc; c++) {
struct twl_mmc_controller *twl = hsmmc + c->mmc - 1;
struct hsmmc_controller *hc = hsmmc + c->mmc - 1;
struct omap_mmc_platform_data *mmc = hsmmc_data[c->mmc - 1];
if (!c->mmc || c->mmc > nr_hsmmc) {
......@@ -162,25 +162,25 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
continue;
}
mmc = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL);
mmc = kzalloc(sizeof(struct omap_mmc_platform_data),
GFP_KERNEL);
if (!mmc) {
pr_err("Cannot allocate memory for mmc device!\n");
goto done;
}
if (c->name)
strncpy(twl->name, c->name, HSMMC_NAME_LEN);
strncpy(hc->name, c->name, HSMMC_NAME_LEN);
else
snprintf(twl->name, ARRAY_SIZE(twl->name),
snprintf(hc->name, ARRAY_SIZE(hc->name),
"mmc%islot%i", c->mmc, 1);
mmc->slots[0].name = twl->name;
mmc->slots[0].name = hc->name;
mmc->nr_slots = 1;
mmc->slots[0].wires = c->wires;
mmc->slots[0].internal_clock = !c->ext_clock;
mmc->dma_mask = 0xffffffff;
mmc->get_context_loss_count =
twl4030_mmc_get_context_loss;
mmc->get_context_loss_count = hsmmc_get_context_loss;
mmc->slots[0].switch_pin = c->gpio_cd;
mmc->slots[0].gpio_wp = c->gpio_wp;
......
......@@ -6,7 +6,7 @@
* published by the Free Software Foundation.
*/
struct twl4030_hsmmc_info {
struct omap2_hsmmc_info {
u8 mmc; /* controller 1/2/3 */
u8 wires; /* 1/4/8 wires */
bool transceiver; /* MMC-2 option */
......@@ -23,11 +23,11 @@ struct twl4030_hsmmc_info {
#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
void twl4030_mmc_init(struct twl4030_hsmmc_info *);
void omap2_hsmmc_init(struct omap2_hsmmc_info *);
#else
static inline void twl4030_mmc_init(struct twl4030_hsmmc_info *info)
static inline void omap2_hsmmc_init(struct omap2_hsmmc_info *info)
{
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册