提交 67c2e93a 编写于 作者: A Anirban Chakraborty 提交者: James Bottomley

[SCSI] qla2xxx: Remove reference to request queue from scsi request block.

srbs used to maintain a reference to the request queue on which
it was enqueued. This is no longer required as the request queue
pointer is now maintained in the scsi host that issues the srb.
Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
上级 68ca949c
......@@ -188,7 +188,6 @@ struct req_que;
* SCSI Request Block
*/
typedef struct srb {
struct req_que *que;
struct fc_port *fcport;
struct scsi_cmnd *cmd; /* Linux SCSI command pkt */
......@@ -2010,7 +2009,6 @@ typedef struct vport_params {
#define VP_RET_CODE_NOT_FOUND 6
struct qla_hw_data;
struct req_que;
struct rsp_que;
/*
* ISP operations
......
......@@ -3177,8 +3177,14 @@ qla2x00_loop_resync(scsi_qla_host_t *vha)
{
int rval = QLA_SUCCESS;
uint32_t wait_time;
struct req_que *req = vha->req;
struct rsp_que *rsp = req->rsp;
struct req_que *req;
struct rsp_que *rsp;
if (ql2xmultique_tag)
req = vha->hw->req_q_map[0];
else
req = vha->req;
rsp = req->rsp;
atomic_set(&vha->loop_state, LOOP_UPDATE);
clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
......@@ -4163,13 +4169,19 @@ qla24xx_configure_vhba(scsi_qla_host_t *vha)
uint16_t mb[MAILBOX_REGISTER_COUNT];
struct qla_hw_data *ha = vha->hw;
struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
struct req_que *req = vha->req;
struct rsp_que *rsp = req->rsp;
struct req_que *req;
struct rsp_que *rsp;
if (!vha->vp_idx)
return -EINVAL;
rval = qla2x00_fw_ready(base_vha);
if (ql2xmultique_tag)
req = ha->req_q_map[0];
else
req = vha->req;
rsp = req->rsp;
if (rval == QLA_SUCCESS) {
clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags);
qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL);
......
......@@ -93,9 +93,10 @@ qla2x00_calc_iocbs_64(uint16_t dsds)
* Returns a pointer to the Continuation Type 0 IOCB packet.
*/
static inline cont_entry_t *
qla2x00_prep_cont_type0_iocb(struct req_que *req, struct scsi_qla_host *vha)
qla2x00_prep_cont_type0_iocb(struct scsi_qla_host *vha)
{
cont_entry_t *cont_pkt;
struct req_que *req = vha->req;
/* Adjust ring index. */
req->ring_index++;
if (req->ring_index == req->length) {
......@@ -121,10 +122,11 @@ qla2x00_prep_cont_type0_iocb(struct req_que *req, struct scsi_qla_host *vha)
* Returns a pointer to the continuation type 1 IOCB packet.
*/
static inline cont_a64_entry_t *
qla2x00_prep_cont_type1_iocb(struct req_que *req, scsi_qla_host_t *vha)
qla2x00_prep_cont_type1_iocb(scsi_qla_host_t *vha)
{
cont_a64_entry_t *cont_pkt;
struct req_que *req = vha->req;
/* Adjust ring index. */
req->ring_index++;
if (req->ring_index == req->length) {
......@@ -160,7 +162,6 @@ void qla2x00_build_scsi_iocbs_32(srb_t *sp, cmd_entry_t *cmd_pkt,
struct scsi_cmnd *cmd;
struct scatterlist *sg;
int i;
struct req_que *req;
cmd = sp->cmd;
......@@ -175,8 +176,6 @@ void qla2x00_build_scsi_iocbs_32(srb_t *sp, cmd_entry_t *cmd_pkt,
}
vha = sp->fcport->vha;
req = sp->que;
cmd_pkt->control_flags |= cpu_to_le16(qla2x00_get_cmd_direction(sp));
/* Three DSDs are available in the Command Type 2 IOCB */
......@@ -193,7 +192,7 @@ void qla2x00_build_scsi_iocbs_32(srb_t *sp, cmd_entry_t *cmd_pkt,
* Seven DSDs are available in the Continuation
* Type 0 IOCB.
*/
cont_pkt = qla2x00_prep_cont_type0_iocb(req, vha);
cont_pkt = qla2x00_prep_cont_type0_iocb(vha);
cur_dsd = (uint32_t *)&cont_pkt->dseg_0_address;
avail_dsds = 7;
}
......@@ -221,7 +220,6 @@ void qla2x00_build_scsi_iocbs_64(srb_t *sp, cmd_entry_t *cmd_pkt,
struct scsi_cmnd *cmd;
struct scatterlist *sg;
int i;
struct req_que *req;
cmd = sp->cmd;
......@@ -236,8 +234,6 @@ void qla2x00_build_scsi_iocbs_64(srb_t *sp, cmd_entry_t *cmd_pkt,
}
vha = sp->fcport->vha;
req = sp->que;
cmd_pkt->control_flags |= cpu_to_le16(qla2x00_get_cmd_direction(sp));
/* Two DSDs are available in the Command Type 3 IOCB */
......@@ -255,7 +251,7 @@ void qla2x00_build_scsi_iocbs_64(srb_t *sp, cmd_entry_t *cmd_pkt,
* Five DSDs are available in the Continuation
* Type 1 IOCB.
*/
cont_pkt = qla2x00_prep_cont_type1_iocb(req, vha);
cont_pkt = qla2x00_prep_cont_type1_iocb(vha);
cur_dsd = (uint32_t *)cont_pkt->dseg_0_address;
avail_dsds = 5;
}
......@@ -354,7 +350,6 @@ qla2x00_start_scsi(srb_t *sp)
/* Build command packet */
req->current_outstanding_cmd = handle;
req->outstanding_cmds[handle] = sp;
sp->que = req;
sp->cmd->host_scribble = (unsigned char *)(unsigned long)handle;
req->cnt -= req_cnt;
......@@ -655,7 +650,7 @@ qla24xx_build_scsi_iocbs(srb_t *sp, struct cmd_type_7 *cmd_pkt,
}
vha = sp->fcport->vha;
req = sp->que;
req = vha->req;
/* Set transfer direction */
if (cmd->sc_data_direction == DMA_TO_DEVICE) {
......@@ -686,7 +681,7 @@ qla24xx_build_scsi_iocbs(srb_t *sp, struct cmd_type_7 *cmd_pkt,
* Five DSDs are available in the Continuation
* Type 1 IOCB.
*/
cont_pkt = qla2x00_prep_cont_type1_iocb(req, vha);
cont_pkt = qla2x00_prep_cont_type1_iocb(vha);
cur_dsd = (uint32_t *)cont_pkt->dseg_0_address;
avail_dsds = 5;
}
......@@ -728,7 +723,6 @@ qla24xx_start_scsi(srb_t *sp)
ret = 0;
qla25xx_set_que(sp, &req, &rsp);
sp->que = req;
/* So we know we haven't pci_map'ed anything yet */
tot_dsds = 0;
......
......@@ -2232,7 +2232,7 @@ qla24xx_abort_command(srb_t *sp)
fc_port_t *fcport = sp->fcport;
struct scsi_qla_host *vha = fcport->vha;
struct qla_hw_data *ha = vha->hw;
struct req_que *req = sp->que;
struct req_que *req = vha->req;
DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
......
......@@ -441,7 +441,6 @@ qla2x00_get_new_sp(scsi_qla_host_t *vha, fc_port_t *fcport,
sp->fcport = fcport;
sp->cmd = cmd;
sp->que = ha->req_q_map[0];
sp->flags = 0;
CMD_SP(cmd) = (void *)sp;
cmd->scsi_done = done;
......@@ -742,7 +741,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
unsigned long flags;
int wait = 0;
struct qla_hw_data *ha = vha->hw;
struct req_que *req;
struct req_que *req = vha->req;
srb_t *spt;
qla2x00_block_error_handler(cmd);
......@@ -758,7 +757,6 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
spt = (srb_t *) CMD_SP(cmd);
if (!spt)
return SUCCESS;
req = spt->que;
/* Check active list for command command. */
spin_lock_irqsave(&ha->hardware_lock, flags);
......@@ -826,7 +824,7 @@ qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *vha, unsigned int t,
return status;
spin_lock_irqsave(&ha->hardware_lock, flags);
req = sp->que;
req = vha->req;
for (cnt = 1; status == QLA_SUCCESS &&
cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
sp = req->outstanding_cmds[cnt];
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册