提交 677e90ed 编写于 作者: T Thomas Graf 提交者: David S. Miller

[NET]: Zerocopy sequential reading of skb data

Implements sequential reading for both linear and non-linear
skb data at zerocopy cost. The data is returned in chunks of
arbitary length, therefore random access is not possible.

Usage:
	from	 := 0
	to	 := 128
	state	 := undef
	data	 := undef
	len	 := undef
	consumed := 0

	skb_prepare_seq_read(skb, from, to, &state)
	while (len = skb_seq_read(consumed, &data, &state)) != 0 do
		/* do something with 'data' of length 'len' */
		if abort then
			/* abort read if we don't wait for
			 * skb_seq_read() to return 0 */
			skb_abort_seq_read(&state)
			return
		endif
		/* not necessary to consume all of 'len' */
		consumed += len
	done
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 6408f79c
...@@ -321,6 +321,24 @@ extern void skb_over_panic(struct sk_buff *skb, int len, ...@@ -321,6 +321,24 @@ extern void skb_over_panic(struct sk_buff *skb, int len,
extern void skb_under_panic(struct sk_buff *skb, int len, extern void skb_under_panic(struct sk_buff *skb, int len,
void *here); void *here);
struct skb_seq_state
{
__u32 lower_offset;
__u32 upper_offset;
__u32 frag_idx;
__u32 stepped_offset;
struct sk_buff *root_skb;
struct sk_buff *cur_skb;
__u8 *frag_data;
};
extern void skb_prepare_seq_read(struct sk_buff *skb,
unsigned int from, unsigned int to,
struct skb_seq_state *st);
extern unsigned int skb_seq_read(unsigned int consumed, const u8 **data,
struct skb_seq_state *st);
extern void skb_abort_seq_read(struct skb_seq_state *st);
/* Internal */ /* Internal */
#define skb_shinfo(SKB) ((struct skb_shared_info *)((SKB)->end)) #define skb_shinfo(SKB) ((struct skb_shared_info *)((SKB)->end))
......
...@@ -1500,6 +1500,120 @@ void skb_split(struct sk_buff *skb, struct sk_buff *skb1, const u32 len) ...@@ -1500,6 +1500,120 @@ void skb_split(struct sk_buff *skb, struct sk_buff *skb1, const u32 len)
skb_split_no_header(skb, skb1, len, pos); skb_split_no_header(skb, skb1, len, pos);
} }
/**
* skb_prepare_seq_read - Prepare a sequential read of skb data
* @skb: the buffer to read
* @from: lower offset of data to be read
* @to: upper offset of data to be read
* @st: state variable
*
* Initializes the specified state variable. Must be called before
* invoking skb_seq_read() for the first time.
*/
void skb_prepare_seq_read(struct sk_buff *skb, unsigned int from,
unsigned int to, struct skb_seq_state *st)
{
st->lower_offset = from;
st->upper_offset = to;
st->root_skb = st->cur_skb = skb;
st->frag_idx = st->stepped_offset = 0;
st->frag_data = NULL;
}
/**
* skb_seq_read - Sequentially read skb data
* @consumed: number of bytes consumed by the caller so far
* @data: destination pointer for data to be returned
* @st: state variable
*
* Reads a block of skb data at &consumed relative to the
* lower offset specified to skb_prepare_seq_read(). Assigns
* the head of the data block to &data and returns the length
* of the block or 0 if the end of the skb data or the upper
* offset has been reached.
*
* The caller is not required to consume all of the data
* returned, i.e. &consumed is typically set to the number
* of bytes already consumed and the next call to
* skb_seq_read() will return the remaining part of the block.
*
* Note: The size of each block of data returned can be arbitary,
* this limitation is the cost for zerocopy seqeuental
* reads of potentially non linear data.
*
* Note: Fragment lists within fragments are not implemented
* at the moment, state->root_skb could be replaced with
* a stack for this purpose.
*/
unsigned int skb_seq_read(unsigned int consumed, const u8 **data,
struct skb_seq_state *st)
{
unsigned int block_limit, abs_offset = consumed + st->lower_offset;
skb_frag_t *frag;
if (unlikely(abs_offset >= st->upper_offset))
return 0;
next_skb:
block_limit = skb_headlen(st->cur_skb);
if (abs_offset < block_limit) {
*data = st->cur_skb->data + abs_offset;
return block_limit - abs_offset;
}
if (st->frag_idx == 0 && !st->frag_data)
st->stepped_offset += skb_headlen(st->cur_skb);
while (st->frag_idx < skb_shinfo(st->cur_skb)->nr_frags) {
frag = &skb_shinfo(st->cur_skb)->frags[st->frag_idx];
block_limit = frag->size + st->stepped_offset;
if (abs_offset < block_limit) {
if (!st->frag_data)
st->frag_data = kmap_skb_frag(frag);
*data = (u8 *) st->frag_data + frag->page_offset +
(abs_offset - st->stepped_offset);
return block_limit - abs_offset;
}
if (st->frag_data) {
kunmap_skb_frag(st->frag_data);
st->frag_data = NULL;
}
st->frag_idx++;
st->stepped_offset += frag->size;
}
if (st->cur_skb->next) {
st->cur_skb = st->cur_skb->next;
st->frag_idx = 0;
goto next_skb;
} else if (st->root_skb == st->cur_skb &&
skb_shinfo(st->root_skb)->frag_list) {
st->cur_skb = skb_shinfo(st->root_skb)->frag_list;
goto next_skb;
}
return 0;
}
/**
* skb_abort_seq_read - Abort a sequential read of skb data
* @st: state variable
*
* Must be called if skb_seq_read() was not called until it
* returned 0.
*/
void skb_abort_seq_read(struct skb_seq_state *st)
{
if (st->frag_data)
kunmap_skb_frag(st->frag_data);
}
void __init skb_init(void) void __init skb_init(void)
{ {
skbuff_head_cache = kmem_cache_create("skbuff_head_cache", skbuff_head_cache = kmem_cache_create("skbuff_head_cache",
...@@ -1538,3 +1652,6 @@ EXPORT_SYMBOL(skb_queue_tail); ...@@ -1538,3 +1652,6 @@ EXPORT_SYMBOL(skb_queue_tail);
EXPORT_SYMBOL(skb_unlink); EXPORT_SYMBOL(skb_unlink);
EXPORT_SYMBOL(skb_append); EXPORT_SYMBOL(skb_append);
EXPORT_SYMBOL(skb_split); EXPORT_SYMBOL(skb_split);
EXPORT_SYMBOL(skb_prepare_seq_read);
EXPORT_SYMBOL(skb_seq_read);
EXPORT_SYMBOL(skb_abort_seq_read);
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册