提交 67458e54 编写于 作者: N Nicolas Ferre 提交者: Alexandre Belloni

ARM: dts: at91/trivial: remove old NAND bindings leftover in sama5d2

As the new bindings are already in place in sama5d2.dtsi and that it's used
in the only Mainline board for this product (at91-sama5d2_ptc_ek.dts), we can
safely remove the old bindings.

Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@bootlin.com>
上级 10af10db
......@@ -326,44 +326,6 @@
};
};
nand0: nand@80000000 {
compatible = "atmel,sama5d2-nand";
#address-cells = <1>;
#size-cells = <1>;
ranges;
reg = < /* EBI CS3 */
0x80000000 0x08000000
/* SMC PMECC regs */
0xf8014070 0x00000490
/* SMC PMECC Error Location regs */
0xf8014500 0x00000200
/* ROM Galois tables */
0x00040000 0x00018000
>;
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>;
atmel,nand-addr-offset = <21>;
atmel,nand-cmd-offset = <22>;
atmel,nand-has-dma;
atmel,has-pmecc;
atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
status = "disabled";
nfc@c0000000 {
compatible = "atmel,sama5d3-nfc";
#address-cells = <1>;
#size-cells = <1>;
reg = < /* NFC Command Registers */
0xc0000000 0x08000000
/* NFC HSMC regs */
0xf8014000 0x00000070
/* NFC SRAM banks */
0x00100000 0x00100000
>;
clocks = <&hsmc_clk>;
atmel,write-by-sram;
};
};
sdmmc0: sdio-host@a0000000 {
compatible = "atmel,sama5d2-sdhci";
reg = <0xa0000000 0x300>;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册