提交 66b51ea7 编写于 作者: P Peter Geis 提交者: Heiko Stuebner

arm64: dts: rockchip: Add rk3568 PCIe2x1 controller

The PCIe2x1 controller is common between the rk3568 and rk3566. It is a
single lane PCIe2 compliant controller.
Signed-off-by: NPeter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20220429123832.2376381-5-pgwipeout@gmail.comSigned-off-by: NHeiko Stuebner <heiko@sntech.de>
上级 b181a1e8
......@@ -752,6 +752,56 @@
reg = <0x0 0xfe1a8100 0x0 0x20>;
};
pcie2x1: pcie@fe260000 {
compatible = "rockchip,rk3568-pcie";
reg = <0x3 0xc0000000 0x0 0x00400000>,
<0x0 0xfe260000 0x0 0x00010000>,
<0x3 0x3f000000 0x0 0x01000000>;
reg-names = "dbi", "apb", "config";
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "sys", "pmc", "msi", "legacy", "err";
bus-range = <0x0 0xf>;
clocks = <&cru ACLK_PCIE20_MST>, <&cru ACLK_PCIE20_SLV>,
<&cru ACLK_PCIE20_DBI>, <&cru PCLK_PCIE20>,
<&cru CLK_PCIE20_AUX_NDFT>;
clock-names = "aclk_mst", "aclk_slv",
"aclk_dbi", "pclk", "aux";
device_type = "pci";
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie_intc 0>,
<0 0 0 2 &pcie_intc 1>,
<0 0 0 3 &pcie_intc 2>,
<0 0 0 4 &pcie_intc 3>;
linux,pci-domain = <0>;
num-ib-windows = <6>;
num-ob-windows = <2>;
max-link-speed = <2>;
msi-map = <0x0 &gic 0x0 0x1000>;
num-lanes = <1>;
phys = <&combphy2 PHY_TYPE_PCIE>;
phy-names = "pcie-phy";
power-domains = <&power RK3568_PD_PIPE>;
ranges = <0x01000000 0x0 0x3ef00000 0x3 0x3ef00000 0x0 0x00100000
0x02000000 0x0 0x00000000 0x3 0x00000000 0x0 0x3ef00000>;
resets = <&cru SRST_PCIE20_POWERUP>;
reset-names = "pipe";
#address-cells = <3>;
#size-cells = <2>;
status = "disabled";
pcie_intc: legacy-interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
interrupt-controller;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>;
};
};
sdmmc0: mmc@fe2b0000 {
compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xfe2b0000 0x0 0x4000>;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册