RDMA/mlx5: Add vport metadata matching for IB representors

If vport metadata matching is enabled in eswitch, the rule created
must be changed to match on the metadata, instead of source port.
Signed-off-by: NJianbo Liu <jianbol@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

drivers/infiniband/hw/mlx5/main.c

@@ -3469,6 +3469,37 @@ static int flow_counters_set_data(struct ib_counters *ibcounters,
 	return ret;
 }
 
+static void mlx5_ib_set_rule_source_port(struct mlx5_ib_dev *dev,
+					 struct mlx5_flow_spec *spec,
+					 struct mlx5_eswitch_rep *rep)
+{
+	struct mlx5_eswitch *esw = dev->mdev->priv.eswitch;
+	void *misc;
+
+	if (mlx5_eswitch_vport_match_metadata_enabled(esw)) {
+		misc = MLX5_ADDR_OF(fte_match_param, spec->match_value,
+				    misc_parameters_2);
+
+		MLX5_SET(fte_match_set_misc2, misc, metadata_reg_c_0,
+			 mlx5_eswitch_get_vport_metadata_for_match(esw,
+								   rep->vport));
+		misc = MLX5_ADDR_OF(fte_match_param, spec->match_criteria,
+				    misc_parameters_2);
+
+		MLX5_SET_TO_ONES(fte_match_set_misc2, misc, metadata_reg_c_0);
+	} else {
+		misc = MLX5_ADDR_OF(fte_match_param, spec->match_value,
+				    misc_parameters);
+
+		MLX5_SET(fte_match_set_misc, misc, source_port, rep->vport);
+
+		misc = MLX5_ADDR_OF(fte_match_param, spec->match_criteria,
+				    misc_parameters);
+
+		MLX5_SET_TO_ONES(fte_match_set_misc, misc, source_port);
+	}
+}
+
 static struct mlx5_ib_flow_handler *_create_flow_rule(struct mlx5_ib_dev *dev,
 						      struct mlx5_ib_flow_prio *ft_prio,
 						      const struct ib_flow_attr *flow_attr,
@@ -3523,19 +3554,15 @@ static struct mlx5_ib_flow_handler *_create_flow_rule(struct mlx5_ib_dev *dev,
 		set_underlay_qp(dev, spec, underlay_qpn);
 
 	if (dev->is_rep) {
-		void *misc;
+		struct mlx5_eswitch_rep *rep;
 
-		if (!dev->port[flow_attr->port - 1].rep) {
+		rep = dev->port[flow_attr->port - 1].rep;
+		if (!rep) {
 			err = -EINVAL;
 			goto free;
 		}
-		misc = MLX5_ADDR_OF(fte_match_param, spec->match_value,
-				    misc_parameters);
-		MLX5_SET(fte_match_set_misc, misc, source_port,
-			 dev->port[flow_attr->port - 1].rep->vport);
-		misc = MLX5_ADDR_OF(fte_match_param, spec->match_criteria,
-				    misc_parameters);
-		MLX5_SET_TO_ONES(fte_match_set_misc, misc, source_port);
+
+		mlx5_ib_set_rule_source_port(dev, spec, rep);
 	}
 
 	spec->match_criteria_enable = get_match_criteria_enable(spec->match_criteria);