ARM: shmobile: move custom gpio functions to sh-gpio.h

Move custom shmobile gpio code to a sh-gpio.h to remove the dependency
on mach/gpio.h. shmobile always uses gpiolib, so we can remove
__GPIOLIB_COMPLEX define from mach/gpio.h.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Magnus Damm <magnus.damm@gmail.com>

arch/arm/mach-shmobile/board-ap4evb.c

@@ -66,6 +66,8 @@
 #include <asm/mach/arch.h>
 #include <asm/setup.h>
 
+#include "sh-gpio.h"
+
 /*
  * Address	Interface		BusWidth	note
  * ------------------------------------------------------------------

arch/arm/mach-shmobile/board-armadillo800eva.c

@@ -54,6 +54,8 @@
 #include <sound/sh_fsi.h>
 #include <sound/simple_card.h>
 
+#include "sh-gpio.h"
+
 /*
  * CON1		Camera Module
  * CON2		Extension Bus

arch/arm/mach-shmobile/board-g4evm.c

@@ -42,6 +42,8 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+#include "sh-gpio.h"
+
 /*
  * SDHI
  *

arch/arm/mach-shmobile/board-mackerel.c

@@ -64,6 +64,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
+#include "sh-gpio.h"
+
 /*
  * Address	Interface		BusWidth	note
  * ------------------------------------------------------------------

arch/arm/mach-shmobile/include/mach/gpio.h

-/*
- * Generic GPIO API and pinmux table support
- *
- * Copyright (c) 2008  Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/sh_pfc.h>
-#include <linux/io.h>
-
-#ifdef CONFIG_GPIOLIB
-
-static inline int irq_to_gpio(unsigned int irq)
-{
-	return -ENOSYS;
-}
-
-#else
-
-#define __ARM_GPIOLIB_COMPLEX
-
-#endif /* CONFIG_GPIOLIB */
-
-/*
- * FIXME !!
- *
- * current gpio frame work doesn't have
- * the method to control only pull up/down/free.
- * this function should be replaced by correct gpio function
- */
-static inline void __init gpio_direction_none(u32 addr)
-{
-	__raw_writeb(0x00, addr);
-}
-
-static inline void __init gpio_request_pullup(u32 addr)
-{
-	u8 data = __raw_readb(addr);
-
-	data &= 0x0F;
-	data |= 0xC0;
-	__raw_writeb(data, addr);
-}
-
-static inline void __init gpio_request_pulldown(u32 addr)
-{
-	u8 data = __raw_readb(addr);
-
-	data &= 0x0F;
-	data |= 0xA0;
-
-	__raw_writeb(data, addr);
-}
-
-#endif /* __ASM_ARCH_GPIO_H */
+/* empty */

arch/arm/mach-shmobile/pfc-r8a7740.c

@@ -20,7 +20,7 @@
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
 #include <mach/r8a7740.h>
 #include <mach/irqs.h>
 

arch/arm/mach-shmobile/pfc-r8a7779.c

@@ -19,7 +19,7 @@
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
 #include <linux/ioport.h>
 #include <mach/r8a7779.h>
 

arch/arm/mach-shmobile/pfc-sh7367.c

@@ -18,7 +18,7 @@
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
 #include <mach/sh7367.h>
 
 #define CPU_ALL_PORT(fn, pfx, sfx)				\

arch/arm/mach-shmobile/pfc-sh7372.c

@@ -22,7 +22,7 @@
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
 #include <mach/irqs.h>
 #include <mach/sh7372.h>
 

arch/arm/mach-shmobile/pfc-sh7377.c

@@ -19,7 +19,7 @@
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
 #include <mach/sh7377.h>
 
 #define CPU_ALL_PORT(fn, pfx, sfx)				\

arch/arm/mach-shmobile/pfc-sh73a0.c

@@ -20,7 +20,7 @@
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
 #include <mach/sh73a0.h>
 #include <mach/irqs.h>
 

arch/arm/mach-shmobile/sh-gpio.h

+/*
+ * Generic GPIO API and pinmux table support
+ *
+ * Copyright (c) 2008  Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+
+/*
+ * FIXME !!
+ *
+ * current gpio frame work doesn't have
+ * the method to control only pull up/down/free.
+ * this function should be replaced by correct gpio function
+ */
+static inline void __init gpio_direction_none(u32 addr)
+{
+	__raw_writeb(0x00, addr);
+}
+
+static inline void __init gpio_request_pullup(u32 addr)
+{
+	u8 data = __raw_readb(addr);
+
+	data &= 0x0F;
+	data |= 0xC0;
+	__raw_writeb(data, addr);
+}
+
+static inline void __init gpio_request_pulldown(u32 addr)
+{
+	u8 data = __raw_readb(addr);
+
+	data &= 0x0F;
+	data |= 0xA0;
+
+	__raw_writeb(data, addr);
+}
+
+#endif /* __ASM_ARCH_GPIO_H */

drivers/sh/pfc/gpio.c

@@ -17,6 +17,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/sh_pfc.h>
 
 struct sh_pfc_chip {
 	struct sh_pfc		*pfc;