hwmon: (pmbus/lm25066) Drop support for LM25063

LM25063 was never released. Drop support for it.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Documentation/hwmon/lm25066

@@ -8,11 +8,6 @@ Supported chips:
     Datasheets:
 	http://www.ti.com/lit/gpn/lm25056
 	http://www.ti.com/lit/gpn/lm25056a
-  * TI LM25063
-    Prefix: 'lm25063'
-    Addresses scanned: -
-    Datasheet:
-	To be announced
   * National Semiconductor LM25066
     Prefix: 'lm25066'
     Addresses scanned: -
@@ -42,7 +37,7 @@ Description
 -----------
 
 This driver supports hardware monitoring for National Semiconductor / TI LM25056,
-LM25063, LM25066, LM5064, and LM5066/LM5066I Power Management, Monitoring,
+LM25066, LM5064, and LM5066/LM5066I Power Management, Monitoring,
 Control, and Protection ICs.
 
 The driver is a client driver to the core PMBus driver. Please see
@@ -74,12 +69,8 @@ in1_input		Measured input voltage.
 in1_average		Average measured input voltage.
 in1_min			Minimum input voltage.
 in1_max			Maximum input voltage.
-in1_crit		Critical high input voltage (LM25063 only).
-in1_lcrit		Critical low input voltage (LM25063 only).
 in1_min_alarm		Input voltage low alarm.
 in1_max_alarm		Input voltage high alarm.
-in1_lcrit_alarm		Input voltage critical low alarm (LM25063 only).
-in1_crit_alarm		Input voltage critical high alarm. (LM25063 only).
 
 in2_label		"vmon"
 in2_input		Measured voltage on VAUX pin
@@ -94,16 +85,12 @@ in3_input		Measured output voltage.
 in3_average		Average measured output voltage.
 in3_min			Minimum output voltage.
 in3_min_alarm		Output voltage low alarm.
-in3_highest		Historical minimum output voltage (LM25063 only).
-in3_lowest		Historical maximum output voltage (LM25063 only).
 
 curr1_label		"iin"
 curr1_input		Measured input current.
 curr1_average		Average measured input current.
 curr1_max		Maximum input current.
-curr1_crit		Critical input current (LM25063 only).
 curr1_max_alarm		Input current high alarm.
-curr1_crit_alarm	Input current critical high alarm (LM25063 only).
 
 power1_label		"pin"
 power1_input		Measured input power.
@@ -113,11 +100,6 @@ power1_alarm		Input power alarm
 power1_input_highest	Historical maximum power.
 power1_reset_history	Write any value to reset maximum power history.
 
-power2_label		"pout". LM25063 only.
-power2_input		Measured output power.
-power2_max		Maximum output power limit.
-power2_crit		Critical output power limit.
-
 temp1_input		Measured temperature.
 temp1_max		Maximum temperature.
 temp1_crit		Critical high temperature.

drivers/hwmon/pmbus/lm25066.c

 /*
- * Hardware monitoring driver for LM25056 / LM25063 / LM25066 / LM5064 / LM5066
+ * Hardware monitoring driver for LM25056 / LM25066 / LM5064 / LM5066
  *
  * Copyright (c) 2011 Ericsson AB.
  * Copyright (c) 2013 Guenter Roeck
@@ -28,7 +28,7 @@
 #include <linux/i2c.h>
 #include "pmbus.h"
 
-enum chips { lm25056, lm25063, lm25066, lm5064, lm5066, lm5066i };
+enum chips { lm25056, lm25066, lm5064, lm5066, lm5066i };
 
 #define LM25066_READ_VAUX		0xd0
 #define LM25066_MFR_READ_IIN		0xd1
@@ -53,11 +53,6 @@ enum chips { lm25056, lm25063, lm25066, lm5064, lm5066, lm5066i };
 #define LM25056_MFR_STS_VAUX_OV_WARN	BIT(1)
 #define LM25056_MFR_STS_VAUX_UV_WARN	BIT(0)
 
-/* LM25063 only */
-
-#define LM25063_READ_VOUT_MAX		0xe5
-#define LM25063_READ_VOUT_MIN		0xe6
-
 struct __coeff {
 	short m, b, R;
 };
@@ -122,36 +117,6 @@ static struct __coeff lm25066_coeff[6][PSC_NUM_CLASSES + 2] = {
 			.m = 16,
 		},
 	},
-	[lm25063] = {
-		[PSC_VOLTAGE_IN] = {
-			.m = 16000,
-			.R = -2,
-		},
-		[PSC_VOLTAGE_OUT] = {
-			.m = 16000,
-			.R = -2,
-		},
-		[PSC_CURRENT_IN] = {
-			.m = 10000,
-			.R = -2,
-		},
-		[PSC_CURRENT_IN_L] = {
-			.m = 10000,
-			.R = -2,
-		},
-		[PSC_POWER] = {
-			.m = 5000,
-			.R = -3,
-		},
-		[PSC_POWER_L] = {
-			.m = 5000,
-			.R = -3,
-		},
-		[PSC_TEMPERATURE] = {
-			.m = 15596,
-			.R = -3,
-		},
-	},
 	[lm5064] = {
 		[PSC_VOLTAGE_IN] = {
 			.m = 4611,
@@ -272,10 +237,6 @@ static int lm25066_read_word_data(struct i2c_client *client, int page, int reg)
 			/* VIN: 6.14 mV VAUX: 293 uV LSB */
 			ret = DIV_ROUND_CLOSEST(ret * 293, 6140);
 			break;
-		case lm25063:
-			/* VIN: 6.25 mV VAUX: 200.0 uV LSB */
-			ret = DIV_ROUND_CLOSEST(ret * 20, 625);
-			break;
 		case lm25066:
 			/* VIN: 4.54 mV VAUX: 283.2 uV LSB */
 			ret = DIV_ROUND_CLOSEST(ret * 2832, 45400);
@@ -330,24 +291,6 @@ static int lm25066_read_word_data(struct i2c_client *client, int page, int reg)
 	return ret;
 }
 
-static int lm25063_read_word_data(struct i2c_client *client, int page, int reg)
-{
-	int ret;
-
-	switch (reg) {
-	case PMBUS_VIRT_READ_VOUT_MAX:
-		ret = pmbus_read_word_data(client, 0, LM25063_READ_VOUT_MAX);
-		break;
-	case PMBUS_VIRT_READ_VOUT_MIN:
-		ret = pmbus_read_word_data(client, 0, LM25063_READ_VOUT_MIN);
-		break;
-	default:
-		ret = lm25066_read_word_data(client, page, reg);
-		break;
-	}
-	return ret;
-}
-
 static int lm25056_read_word_data(struct i2c_client *client, int page, int reg)
 {
 	int ret;
@@ -502,11 +445,6 @@ static int lm25066_probe(struct i2c_client *client,
 		info->read_word_data = lm25056_read_word_data;
 		info->read_byte_data = lm25056_read_byte_data;
 		data->rlimit = 0x0fff;
-	} else if (data->id == lm25063) {
-		info->func[0] |= PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
-		  | PMBUS_HAVE_POUT;
-		info->read_word_data = lm25063_read_word_data;
-		data->rlimit = 0xffff;
 	} else {
 		info->func[0] |= PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
 		info->read_word_data = lm25066_read_word_data;
@@ -543,7 +481,6 @@ static int lm25066_probe(struct i2c_client *client,
 
 static const struct i2c_device_id lm25066_id[] = {
 	{"lm25056", lm25056},
-	{"lm25063", lm25063},
 	{"lm25066", lm25066},
 	{"lm5064", lm5064},
 	{"lm5066", lm5066},