Skip to content

K
Kernel

openeuler / Kernel
接近 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 65cbbd03 编写于 作者: I Ingo Molnar
浏览文件
操作

Merge branch 'perf/urgent' into perf/core, to resolve conflict 

Signed-off-by: NIngo Molnar <mingo@kernel.org>
上级 9243ae5b b303e7c1
展开全部 隐藏空白更改
内联 并排
Showing with 1301 addition and 940 deletion
Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
浏览文件 @ 65cbbd03
== Amlogic Meson pinmux controller ==
Required properties for the root node:
- compatible: "amlogic,meson8-pinctrl" or "amlogic,meson8b-pinctrl"
- compatible: one of "amlogic,meson8-cbus-pinctrl"
"amlogic,meson8b-cbus-pinctrl"
"amlogic,meson8-aobus-pinctrl"
"amlogic,meson8b-aobus-pinctrl"
- reg: address and size of registers controlling irq functionality
=== GPIO sub-nodes ===
The 2 power domains of the controller (regular and always-on) are
represented as sub-nodes and each of them acts as a GPIO controller.
The GPIO bank for the controller is represented as a sub-node and it acts as a
GPIO controller.
Required properties for sub-nodes are:
- reg: should contain address and size for mux, pull-enable, pull and
......@@ -18,10 +21,6 @@ Required properties for sub-nodes are:
- gpio-controller: identifies the node as a gpio controller
- #gpio-cells: must be 2
Valid sub-node names are:
- "banks" for the regular domain
- "ao-bank" for the always-on domain
=== Other sub-nodes ===
Child nodes without the "gpio-controller" represent some desired
......@@ -45,7 +44,7 @@ pinctrl-bindings.txt
=== Example ===
pinctrl: pinctrl@c1109880 {
compatible = "amlogic,meson8-pinctrl";
compatible = "amlogic,meson8-cbus-pinctrl";
reg = <0xc1109880 0x10>;
#address-cells = <1>;
#size-cells = <1>;
......@@ -61,15 +60,6 @@ pinctrl-bindings.txt
#gpio-cells = <2>;
};
gpio_ao: ao-bank@c1108030 {
reg = <0xc8100014 0x4>,
<0xc810002c 0x4>,
<0xc8100024 0x8>;
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
};
nand {
mux {
groups = "nand_io", "nand_io_ce0", "nand_io_ce1",
......@@ -79,18 +69,4 @@ pinctrl-bindings.txt
function = "nand";
};
};
uart_ao_a {
mux {
groups = "uart_tx_ao_a", "uart_rx_ao_a",
"uart_cts_ao_a", "uart_rts_ao_a";
function = "uart_ao";
};
conf {
pins = "GPIOAO_0", "GPIOAO_1",
"GPIOAO_2", "GPIOAO_3";
bias-disable;
};
};
};
Documentation/kernel-parameters.txt
浏览文件 @ 65cbbd03
......@@ -4077,6 +4077,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
sector if the number is odd);
i = IGNORE_DEVICE (don't bind to this
device);
j = NO_REPORT_LUNS (don't use report luns
command, uas only);
l = NOT_LOCKABLE (don't try to lock and
unlock ejectable media);
m = MAX_SECTORS_64 (don't transfer more
......
Documentation/usb/gadget_multi.txt
浏览文件 @ 65cbbd03
......@@ -43,7 +43,7 @@ For the gadget two work under Windows two conditions have to be met:
First of all, Windows need to detect the gadget as an USB composite
gadget which on its own have some conditions[4]. If they are met,
Windows lets USB Generic Parent Driver[5] handle the device which then
tries to much drivers for each individual interface (sort of, don't
tries to match drivers for each individual interface (sort of, don't
get into too many details).
The good news is: you do not have to worry about most of the
......
Documentation/x86/protection-keys.txt 0 → 100644
浏览文件 @ 65cbbd03
Memory Protection Keys for Userspace (PKU aka PKEYs) is a CPU feature
which will be found on future Intel CPUs.
Memory Protection Keys provides a mechanism for enforcing page-based
protections, but without requiring modification of the page tables
when an application changes protection domains. It works by
dedicating 4 previously ignored bits in each page table entry to a
"protection key", giving 16 possible keys.
There is also a new user-accessible register (PKRU) with two separate
bits (Access Disable and Write Disable) for each key. Being a CPU
register, PKRU is inherently thread-local, potentially giving each
thread a different set of protections from every other thread.
There are two new instructions (RDPKRU/WRPKRU) for reading and writing
to the new register. The feature is only available in 64-bit mode,
even though there is theoretically space in the PAE PTEs. These
permissions are enforced on data access only and have no effect on
instruction fetches.
=========================== Config Option ===========================
This config option adds approximately 1.5kb of text. and 50 bytes of
data to the executable. A workload which does large O_DIRECT reads
of holes in XFS files was run to exercise get_user_pages_fast(). No
performance delta was observed with the config option
enabled or disabled.
MAINTAINERS
浏览文件 @ 65cbbd03
......@@ -6252,8 +6252,8 @@ S: Maintained
F: tools/testing/selftests
KERNEL VIRTUAL MACHINE (KVM)
M: Gleb Natapov <gleb@kernel.org>
M: Paolo Bonzini <pbonzini@redhat.com>
M: Radim Krčmář <rkrcmar@redhat.com>
L: kvm@vger.kernel.org
W: http://www.linux-kvm.org
T: git git://git.kernel.org/pub/scm/virt/kvm/kvm.git
......
Makefile
浏览文件 @ 65cbbd03
VERSION = 4
PATCHLEVEL = 6
SUBLEVEL = 0
EXTRAVERSION = -rc3
EXTRAVERSION = -rc4
NAME = Blurry Fish Butt
# *DOCUMENTATION*
......
arch/arc/Kconfig
浏览文件 @ 65cbbd03
......@@ -593,7 +593,6 @@ config PCI_SYSCALL
def_bool PCI
source "drivers/pci/Kconfig"
source "drivers/pci/pcie/Kconfig"
endmenu
......
arch/arc/boot/dts/axs10x_mb.dtsi
浏览文件 @ 65cbbd03
......@@ -47,14 +47,6 @@
clocks = <&apbclk>;
clock-names = "stmmaceth";
max-speed = <100>;
mdio0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dwmac-mdio";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
};
ehci@0x40000 {
......
arch/arc/configs/axs103_defconfig
浏览文件 @ 65cbbd03
......@@ -42,6 +42,7 @@ CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
......
arch/arc/configs/axs103_smp_defconfig
浏览文件 @ 65cbbd03
......@@ -43,6 +43,7 @@ CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
......
arch/arc/include/asm/fb.h 0 → 100644
浏览文件 @ 65cbbd03
#ifndef _ASM_FB_H_
#define _ASM_FB_H_
#include <linux/fb.h>
#include <linux/fs.h>
#include <asm/page.h>
static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
unsigned long off)
{
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
}
static inline int fb_is_primary_device(struct fb_info *info)
{
return 0;
}
#endif /* _ASM_FB_H_ */
arch/arm/boot/dts/am335x-baltos-ir5221.dts
浏览文件 @ 65cbbd03
......@@ -470,9 +470,12 @@
};
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <0>;
phy-mode = "rmii";
dual_emac_res_vlan = <1>;
fixed-link {
speed = <100>;
full-duplex;
};
};
&cpsw_emac1 {
......
arch/arm/boot/dts/am4372.dtsi
浏览文件 @ 65cbbd03
......@@ -207,7 +207,7 @@
ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
<&edma_tptc2 0>;
ti,edma-memcpy-channels = <32 33>;
ti,edma-memcpy-channels = <58 59>;
};
edma_tptc0: tptc@49800000 {
......
arch/arm/boot/dts/am43x-epos-evm.dts
浏览文件 @ 65cbbd03
......@@ -794,3 +794,8 @@
tx-num-evt = <32>;
rx-num-evt = <32>;
};
&synctimer_32kclk {
assigned-clocks = <&mux_synctimer32k_ck>;
assigned-clock-parents = <&clkdiv32k_ick>;
};
arch/arm/boot/dts/armada-385-linksys.dtsi
浏览文件 @ 65cbbd03
......@@ -117,7 +117,7 @@
};
/* USB part of the eSATA/USB 2.0 port */
usb@50000 {
usb@58000 {
status = "okay";
};
......
arch/arm/boot/dts/meson8.dtsi
浏览文件 @ 65cbbd03
......@@ -91,8 +91,8 @@
clock-frequency = <141666666>;
};
pinctrl: pinctrl@c1109880 {
compatible = "amlogic,meson8-pinctrl";
pinctrl_cbus: pinctrl@c1109880 {
compatible = "amlogic,meson8-cbus-pinctrl";
reg = <0xc1109880 0x10>;
#address-cells = <1>;
#size-cells = <1>;
......@@ -108,29 +108,6 @@
#gpio-cells = <2>;
};
gpio_ao: ao-bank@c1108030 {
reg = <0xc8100014 0x4>,
<0xc810002c 0x4>,
<0xc8100024 0x8>;
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
};
uart_ao_a_pins: uart_ao_a {
mux {
groups = "uart_tx_ao_a", "uart_rx_ao_a";
function = "uart_ao";
};
};
i2c_ao_pins: i2c_mst_ao {
mux {
groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
function = "i2c_mst_ao";
};
};
spi_nor_pins: nor {
mux {
groups = "nor_d", "nor_q", "nor_c", "nor_cs";
......@@ -157,4 +134,34 @@
};
};
pinctrl_aobus: pinctrl@c8100084 {
compatible = "amlogic,meson8-aobus-pinctrl";
reg = <0xc8100084 0xc>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
gpio_ao: ao-bank@c1108030 {
reg = <0xc8100014 0x4>,
<0xc810002c 0x4>,
<0xc8100024 0x8>;
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
};
uart_ao_a_pins: uart_ao_a {
mux {
groups = "uart_tx_ao_a", "uart_rx_ao_a";
function = "uart_ao";
};
};
i2c_ao_pins: i2c_mst_ao {
mux {
groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
function = "i2c_mst_ao";
};
};
};
}; /* end of / */
arch/arm/boot/dts/meson8b.dtsi
浏览文件 @ 65cbbd03
......@@ -155,8 +155,8 @@
reg = <0xc1108000 0x4>, <0xc1104000 0x460>;
};
pinctrl: pinctrl@c1109880 {
compatible = "amlogic,meson8b-pinctrl";
pinctrl_cbus: pinctrl@c1109880 {
compatible = "amlogic,meson8b-cbus-pinctrl";
reg = <0xc1109880 0x10>;
#address-cells = <1>;
#size-cells = <1>;
......@@ -171,6 +171,14 @@
gpio-controller;
#gpio-cells = <2>;
};
};
pinctrl_aobus: pinctrl@c8100084 {
compatible = "amlogic,meson8b-aobus-pinctrl";
reg = <0xc8100084 0xc>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
gpio_ao: ao-bank@c1108030 {
reg = <0xc8100014 0x4>,
......
arch/arm/boot/dts/omap4.dtsi
浏览文件 @ 65cbbd03
......@@ -70,7 +70,7 @@
compatible = "arm,cortex-a9-twd-timer";
clocks = <&mpu_periphclk>;
reg = <0x48240600 0x20>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_EDGE_RISING)>;
interrupt-parent = <&gic>;
};
......
arch/arm/configs/u8500_defconfig
浏览文件 @ 65cbbd03
......@@ -63,6 +63,9 @@ CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_BU21013=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_AB8500_PONKEY=y
CONFIG_RMI4_CORE=y
CONFIG_RMI4_I2C=y
CONFIG_RMI4_F11=y
# CONFIG_SERIO is not set
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_LEGACY_PTYS is not set
......
arch/arm/kvm/arm.c
浏览文件 @ 65cbbd03
......@@ -1112,10 +1112,17 @@ static void __init hyp_cpu_pm_init(void)
{
cpu_pm_register_notifier(&hyp_init_cpu_pm_nb);
}
static void __init hyp_cpu_pm_exit(void)
{
cpu_pm_unregister_notifier(&hyp_init_cpu_pm_nb);
}
#else
static inline void hyp_cpu_pm_init(void)
{
}
static inline void hyp_cpu_pm_exit(void)
{
}
#endif
static void teardown_common_resources(void)
......@@ -1141,9 +1148,7 @@ static int init_subsystems(void)
/*
* Register CPU Hotplug notifier
*/
cpu_notifier_register_begin();
err = __register_cpu_notifier(&hyp_init_cpu_nb);
cpu_notifier_register_done();
err = register_cpu_notifier(&hyp_init_cpu_nb);
if (err) {
kvm_err("Cannot register KVM init CPU notifier (%d)\n", err);
return err;
......@@ -1193,6 +1198,8 @@ static void teardown_hyp_mode(void)
free_hyp_pgds();
for_each_possible_cpu(cpu)
free_page(per_cpu(kvm_arm_hyp_stack_page, cpu));
unregister_cpu_notifier(&hyp_init_cpu_nb);
hyp_cpu_pm_exit();
}
static int init_vhe_mode(void)
......
arch/arm/mach-omap2/id.c
浏览文件 @ 65cbbd03
......@@ -669,9 +669,9 @@ void __init dra7xxx_check_revision(void)
case 0:
omap_revision = DRA722_REV_ES1_0;
break;
case 1:
default:
/* If we have no new revisions */
omap_revision = DRA722_REV_ES1_0;
omap_revision = DRA722_REV_ES2_0;
break;
}
break;
......
arch/arm/mach-omap2/io.c
浏览文件 @ 65cbbd03
......@@ -368,6 +368,7 @@ void __init omap5_map_io(void)
void __init dra7xx_map_io(void)
{
iotable_init(dra7xx_io_desc, ARRAY_SIZE(dra7xx_io_desc));
omap_barriers_init();
}
#endif
/*
......
arch/arm/mach-omap2/omap_hwmod.c
浏览文件 @ 65cbbd03
......@@ -1416,9 +1416,7 @@ static void _enable_sysc(struct omap_hwmod *oh)
(sf & SYSC_HAS_CLOCKACTIVITY))
_set_clockactivity(oh, oh->class->sysc->clockact, &v);
/* If the cached value is the same as the new value, skip the write */
if (oh->_sysc_cache != v)
_write_sysconfig(v, oh);
_write_sysconfig(v, oh);
/*
* Set the autoidle bit only after setting the smartidle bit
......@@ -1481,7 +1479,9 @@ static void _idle_sysc(struct omap_hwmod *oh)
_set_master_standbymode(oh, idlemode, &v);
}
_write_sysconfig(v, oh);
/* If the cached value is the same as the new value, skip the write */
if (oh->_sysc_cache != v)
_write_sysconfig(v, oh);
}
/**
......
arch/arm/mach-omap2/omap_hwmod_81xx_data.c
浏览文件 @ 65cbbd03
......@@ -582,9 +582,11 @@ static struct omap_hwmod_ocp_if dm81xx_alwon_l3_slow__gpmc = {
.user = OCP_USER_MPU,
};
/* USB needs udelay 1 after reset at least on hp t410, use 2 for margin */
static struct omap_hwmod_class_sysconfig dm81xx_usbhsotg_sysc = {
.rev_offs = 0x0,
.sysc_offs = 0x10,
.srst_udelay = 2,
.sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
SYSC_HAS_SOFTRESET,
.idlemodes = SIDLE_SMART | MSTANDBY_FORCE | MSTANDBY_SMART,
......
arch/arm/mach-omap2/soc.h
浏览文件 @ 65cbbd03
......@@ -489,6 +489,7 @@ IS_OMAP_TYPE(3430, 0x3430)
#define DRA752_REV_ES2_0 (DRA7XX_CLASS | (0x52 << 16) | (0x20 << 8))
#define DRA722_REV_ES1_0 (DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8))
#define DRA722_REV_ES1_0 (DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8))
#define DRA722_REV_ES2_0 (DRA7XX_CLASS | (0x22 << 16) | (0x20 << 8))
void omap2xxx_check_revision(void);
void omap3xxx_check_revision(void);
......
arch/arm/mach-pxa/devices.c
浏览文件 @ 65cbbd03
......@@ -1235,5 +1235,6 @@ static struct platform_device pxa2xx_pxa_dma = {
void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors)
{
pxa_dma_pdata.dma_channels = nb_channels;
pxa_dma_pdata.nb_requestors = nb_requestors;
pxa_register_device(&pxa2xx_pxa_dma, &pxa_dma_pdata);
}
arch/arm/mach-sa1100/Kconfig
浏览文件 @ 65cbbd03
......@@ -61,10 +61,7 @@ config SA1100_H3100
select MFD_IPAQ_MICRO
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3100 handheld computer. Information about this machine and the
Linux port to this machine can be found at:
<http://www.handhelds.org/Compaq/index.html#iPAQ_H3100>
H3100 handheld computer.
config SA1100_H3600
bool "Compaq iPAQ H3600/H3700"
......@@ -73,10 +70,7 @@ config SA1100_H3600
select MFD_IPAQ_MICRO
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3600 handheld computer. Information about this machine and the
Linux port to this machine can be found at:
<http://www.handhelds.org/Compaq/index.html#iPAQ_H3600>
H3600 and H3700 handheld computers.
config SA1100_BADGE4
bool "HP Labs BadgePAD 4"
......
arch/arm/mach-uniphier/platsmp.c
浏览文件 @ 65cbbd03
......@@ -120,7 +120,7 @@ static int __init uniphier_smp_prepare_trampoline(unsigned int max_cpus)
if (ret)
return ret;
uniphier_smp_rom_boot_rsv2 = ioremap(rom_rsv2_phys, sizeof(SZ_4));
uniphier_smp_rom_boot_rsv2 = ioremap(rom_rsv2_phys, SZ_4);
if (!uniphier_smp_rom_boot_rsv2) {
pr_err("failed to map ROM_BOOT_RSV2 register\n");
return -ENOMEM;
......
arch/arm64/boot/dts/broadcom/vulcan.dtsi
浏览文件 @ 65cbbd03
......@@ -108,12 +108,15 @@
reg = <0x0 0x30000000 0x0 0x10000000>;
reg-names = "PCI ECAM";
/* IO 0x4000_0000 - 0x4001_0000 */
ranges = <0x01000000 0 0x40000000 0 0x40000000 0 0x00010000
/* MEM 0x4800_0000 - 0x5000_0000 */
0x02000000 0 0x48000000 0 0x48000000 0 0x08000000
/* MEM64 pref 0x6_0000_0000 - 0x7_0000_0000 */
0x43000000 6 0x00000000 6 0x00000000 1 0x00000000>;
/*
* PCI ranges:
* IO no supported
* MEM 0x4000_0000 - 0x6000_0000
* MEM64 pref 0x40_0000_0000 - 0x60_0000_0000
*/
ranges =
<0x02000000 0 0x40000000 0 0x40000000 0 0x20000000
0x43000000 0x40 0x00000000 0x40 0x00000000 0x20 0x00000000>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map =
/* addr pin ic icaddr icintr */
......
arch/arm64/include/asm/kvm_arm.h
浏览文件 @ 65cbbd03
......@@ -151,8 +151,7 @@
*/
#define VTCR_EL2_FLAGS (VTCR_EL2_TG0_64K | VTCR_EL2_SH0_INNER | \
VTCR_EL2_ORGN0_WBWA | VTCR_EL2_IRGN0_WBWA | \
VTCR_EL2_SL0_LVL1 | VTCR_EL2_T0SZ_40B | \
VTCR_EL2_RES1)
VTCR_EL2_SL0_LVL1 | VTCR_EL2_RES1)
#define VTTBR_X (38 - VTCR_EL2_T0SZ_40B)
#else
/*
......@@ -163,8 +162,7 @@
*/
#define VTCR_EL2_FLAGS (VTCR_EL2_TG0_4K | VTCR_EL2_SH0_INNER | \
VTCR_EL2_ORGN0_WBWA | VTCR_EL2_IRGN0_WBWA | \
VTCR_EL2_SL0_LVL1 | VTCR_EL2_T0SZ_40B | \
VTCR_EL2_RES1)
VTCR_EL2_SL0_LVL1 | VTCR_EL2_RES1)
#define VTTBR_X (37 - VTCR_EL2_T0SZ_40B)
#endif
......
arch/arm64/include/asm/kvm_asm.h
浏览文件 @ 65cbbd03
......@@ -54,7 +54,7 @@ extern void __vgic_v3_init_lrs(void);
extern u32 __kvm_get_mdcr_el2(void);
extern void __init_stage2_translation(void);
extern u32 __init_stage2_translation(void);
#endif
......
arch/arm64/include/asm/kvm_host.h
浏览文件 @ 65cbbd03
......@@ -369,11 +369,12 @@ int kvm_arm_vcpu_arch_get_attr(struct kvm_vcpu *vcpu,
int kvm_arm_vcpu_arch_has_attr(struct kvm_vcpu *vcpu,
struct kvm_device_attr *attr);
/* #define kvm_call_hyp(f, ...) __kvm_call_hyp(kvm_ksym_ref(f), ##__VA_ARGS__) */
static inline void __cpu_init_stage2(void)
{
kvm_call_hyp(__init_stage2_translation);
u32 parange = kvm_call_hyp(__init_stage2_translation);
WARN_ONCE(parange < 40,
"PARange is %d bits, unsupported configuration!", parange);
}
#endif /* __ARM64_KVM_HOST_H__ */
arch/arm64/kvm/hyp/s2-setup.c
浏览文件 @ 65cbbd03
......@@ -20,9 +20,10 @@
#include <asm/kvm_asm.h>
#include <asm/kvm_hyp.h>
void __hyp_text __init_stage2_translation(void)
u32 __hyp_text __init_stage2_translation(void)
{
u64 val = VTCR_EL2_FLAGS;
u64 parange;
u64 tmp;
/*
......@@ -30,7 +31,39 @@ void __hyp_text __init_stage2_translation(void)
* bits in VTCR_EL2. Amusingly, the PARange is 4 bits, while
* PS is only 3. Fortunately, bit 19 is RES0 in VTCR_EL2...
*/
val |= (read_sysreg(id_aa64mmfr0_el1) & 7) << 16;
parange = read_sysreg(id_aa64mmfr0_el1) & 7;
val |= parange << 16;
/* Compute the actual PARange... */
switch (parange) {
case 0:
parange = 32;
break;
case 1:
parange = 36;
break;
case 2:
parange = 40;
break;
case 3:
parange = 42;
break;
case 4:
parange = 44;
break;
case 5:
default:
parange = 48;
break;
}
/*
* ... and clamp it to 40 bits, unless we have some braindead
* HW that implements less than that. In all cases, we'll
* return that value for the rest of the kernel to decide what
* to do.
*/
val |= 64 - (parange > 40 ? 40 : parange);
/*
* Read the VMIDBits bits from ID_AA64MMFR1_EL1 and set the VS
......@@ -42,4 +75,6 @@ void __hyp_text __init_stage2_translation(void)
VTCR_EL2_VS_8BIT;
write_sysreg(val, vtcr_el2);
return parange;
}
arch/m68k/coldfire/gpio.c
浏览文件 @ 65cbbd03
......@@ -158,11 +158,6 @@ static int mcfgpio_to_irq(struct gpio_chip *chip, unsigned offset)
return -EINVAL;
}
static struct bus_type mcfgpio_subsys = {
.name = "gpio",
.dev_name = "gpio",
};
static struct gpio_chip mcfgpio_chip = {
.label = "mcfgpio",
.request = mcfgpio_request,
......@@ -178,8 +173,7 @@ static struct gpio_chip mcfgpio_chip = {
static int __init mcfgpio_sysinit(void)
{
gpiochip_add_data(&mcfgpio_chip, NULL);
return subsys_system_register(&mcfgpio_subsys, NULL);
return gpiochip_add_data(&mcfgpio_chip, NULL);
}
core_initcall(mcfgpio_sysinit);
......
arch/m68k/configs/amiga_defconfig
浏览文件 @ 65cbbd03
CONFIG_LOCALVERSION="-amiga"
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_FHANDLE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_LOG_BUF_SHIFT=16
......@@ -64,7 +63,6 @@ CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
......@@ -285,7 +283,9 @@ CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
CONFIG_NET_L3_MASTER_DEV=y
CONFIG_AF_KCM=m
# CONFIG_WIRELESS is not set
CONFIG_NET_DEVLINK=m
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
......@@ -359,6 +359,7 @@ CONFIG_MACVTAP=m
CONFIG_IPVLAN=m
CONFIG_VXLAN=m
CONFIG_GENEVE=m
CONFIG_MACSEC=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_VETH=m
......@@ -452,6 +453,7 @@ CONFIG_JFS_FS=m
CONFIG_XFS_FS=m
CONFIG_OCFS2_FS=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
CONFIG_FS_ENCRYPTION=m
CONFIG_FANOTIFY=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
......@@ -468,6 +470,7 @@ CONFIG_VFAT_FS=m
CONFIG_PROC_KCORE=y
CONFIG_PROC_CHILDREN=y
CONFIG_TMPFS=y
CONFIG_ORANGEFS_FS=m
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_ECRYPT_FS_MESSAGING=y
......@@ -549,6 +552,7 @@ CONFIG_TEST_HEXDUMP=m
CONFIG_TEST_STRING_HELPERS=m
CONFIG_TEST_KSTRTOX=m
CONFIG_TEST_PRINTF=m
CONFIG_TEST_BITMAP=m
CONFIG_TEST_RHASHTABLE=m
CONFIG_TEST_LKM=m
CONFIG_TEST_USER_COPY=m
......@@ -557,7 +561,6 @@ CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_USER=m
......@@ -565,12 +568,9 @@ CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_MCRYPTD=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_CHACHA20POLY1305=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_KEYWRAP=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
......@@ -594,7 +594,6 @@ CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_842=m
CONFIG_CRYPTO_LZ4=m
......
arch/m68k/configs/apollo_defconfig
浏览文件 @ 65cbbd03
CONFIG_LOCALVERSION="-apollo"
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_FHANDLE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_LOG_BUF_SHIFT=16
......@@ -62,7 +61,6 @@ CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
......@@ -283,7 +281,9 @@ CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
CONFIG_NET_L3_MASTER_DEV=y
CONFIG_AF_KCM=m
# CONFIG_WIRELESS is not set
CONFIG_NET_DEVLINK=m
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
......@@ -341,6 +341,7 @@ CONFIG_MACVTAP=m
CONFIG_IPVLAN=m
CONFIG_VXLAN=m
CONFIG_GENEVE=m
CONFIG_MACSEC=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_VETH=m
......@@ -411,6 +412,7 @@ CONFIG_JFS_FS=m
CONFIG_XFS_FS=m
CONFIG_OCFS2_FS=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
CONFIG_FS_ENCRYPTION=m
CONFIG_FANOTIFY=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
......@@ -427,6 +429,7 @@ CONFIG_VFAT_FS=m
CONFIG_PROC_KCORE=y
CONFIG_PROC_CHILDREN=y
CONFIG_TMPFS=y
CONFIG_ORANGEFS_FS=m
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_ECRYPT_FS_MESSAGING=y
......@@ -508,6 +511,7 @@ CONFIG_TEST_HEXDUMP=m
CONFIG_TEST_STRING_HELPERS=m
CONFIG_TEST_KSTRTOX=m
CONFIG_TEST_PRINTF=m
CONFIG_TEST_BITMAP=m
CONFIG_TEST_RHASHTABLE=m
CONFIG_TEST_LKM=m
CONFIG_TEST_USER_COPY=m
......@@ -516,7 +520,6 @@ CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_USER=m
......@@ -524,12 +527,9 @@ CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_MCRYPTD=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_CHACHA20POLY1305=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_KEYWRAP=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
......@@ -553,7 +553,6 @@ CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_842=m
CONFIG_CRYPTO_LZ4=m
......
arch/m68k/configs/atari_defconfig
浏览文件 @ 65cbbd03
CONFIG_LOCALVERSION="-atari"
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_FHANDLE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_LOG_BUF_SHIFT=16
......@@ -62,7 +61,6 @@ CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
......@@ -283,7 +281,9 @@ CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
CONFIG_NET_L3_MASTER_DEV=y
CONFIG_AF_KCM=m
# CONFIG_WIRELESS is not set
CONFIG_NET_DEVLINK=m
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
......@@ -350,6 +350,7 @@ CONFIG_MACVTAP=m
CONFIG_IPVLAN=m
CONFIG_VXLAN=m
CONFIG_GENEVE=m
CONFIG_MACSEC=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_VETH=m
......@@ -432,6 +433,7 @@ CONFIG_JFS_FS=m
CONFIG_XFS_FS=m
CONFIG_OCFS2_FS=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
CONFIG_FS_ENCRYPTION=m
CONFIG_FANOTIFY=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
......@@ -448,6 +450,7 @@ CONFIG_VFAT_FS=m
CONFIG_PROC_KCORE=y
CONFIG_PROC_CHILDREN=y
CONFIG_TMPFS=y
CONFIG_ORANGEFS_FS=m
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_ECRYPT_FS_MESSAGING=y
......@@ -529,6 +532,7 @@ CONFIG_TEST_HEXDUMP=m
CONFIG_TEST_STRING_HELPERS=m
CONFIG_TEST_KSTRTOX=m
CONFIG_TEST_PRINTF=m
CONFIG_TEST_BITMAP=m
CONFIG_TEST_RHASHTABLE=m
CONFIG_TEST_LKM=m
CONFIG_TEST_USER_COPY=m
......@@ -537,7 +541,6 @@ CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_USER=m
......@@ -545,12 +548,9 @@ CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_MCRYPTD=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_CHACHA20POLY1305=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_KEYWRAP=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
......@@ -574,7 +574,6 @@ CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_842=m
CONFIG_CRYPTO_LZ4=m
......
arch/m68k/configs/bvme6000_defconfig
浏览文件 @ 65cbbd03
CONFIG_LOCALVERSION="-bvme6000"
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_FHANDLE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_LOG_BUF_SHIFT=16
......@@ -60,7 +59,6 @@ CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
......@@ -281,7 +279,9 @@ CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
CONFIG_NET_L3_MASTER_DEV=y
CONFIG_AF_KCM=m
# CONFIG_WIRELESS is not set
CONFIG_NET_DEVLINK=m
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
......@@ -340,6 +340,7 @@ CONFIG_MACVTAP=m
CONFIG_IPVLAN=m
CONFIG_VXLAN=m
CONFIG_GENEVE=m
CONFIG_MACSEC=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_VETH=m
......@@ -403,6 +404,7 @@ CONFIG_JFS_FS=m
CONFIG_XFS_FS=m
CONFIG_OCFS2_FS=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
CONFIG_FS_ENCRYPTION=m
CONFIG_FANOTIFY=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
......@@ -419,6 +421,7 @@ CONFIG_VFAT_FS=m
CONFIG_PROC_KCORE=y
CONFIG_PROC_CHILDREN=y
CONFIG_TMPFS=y
CONFIG_ORANGEFS_FS=m
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_ECRYPT_FS_MESSAGING=y
......@@ -500,6 +503,7 @@ CONFIG_TEST_HEXDUMP=m
CONFIG_TEST_STRING_HELPERS=m
CONFIG_TEST_KSTRTOX=m
CONFIG_TEST_PRINTF=m
CONFIG_TEST_BITMAP=m
CONFIG_TEST_RHASHTABLE=m
CONFIG_TEST_LKM=m
CONFIG_TEST_USER_COPY=m
......@@ -508,7 +512,6 @@ CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_USER=m
......@@ -516,12 +519,9 @@ CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_MCRYPTD=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_CHACHA20POLY1305=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_KEYWRAP=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
......@@ -545,7 +545,6 @@ CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_842=m
CONFIG_CRYPTO_LZ4=m
......
arch/m68k/configs/hp300_defconfig
浏览文件 @ 65cbbd03
CONFIG_LOCALVERSION="-hp300"
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_FHANDLE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_LOG_BUF_SHIFT=16
......@@ -62,7 +61,6 @@ CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
......@@ -283,7 +281,9 @@ CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
CONFIG_NET_L3_MASTER_DEV=y
CONFIG_AF_KCM=m
# CONFIG_WIRELESS is not set
CONFIG_NET_DEVLINK=m
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
......@@ -341,6 +341,7 @@ CONFIG_MACVTAP=m
CONFIG_IPVLAN=m
CONFIG_VXLAN=m
CONFIG_GENEVE=m
CONFIG_MACSEC=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_VETH=m
......@@ -413,6 +414,7 @@ CONFIG_JFS_FS=m
CONFIG_XFS_FS=m
CONFIG_OCFS2_FS=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
CONFIG_FS_ENCRYPTION=m
CONFIG_FANOTIFY=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
......@@ -429,6 +431,7 @@ CONFIG_VFAT_FS=m
CONFIG_PROC_KCORE=y
CONFIG_PROC_CHILDREN=y
CONFIG_TMPFS=y
CONFIG_ORANGEFS_FS=m
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_ECRYPT_FS_MESSAGING=y
......@@ -510,6 +513,7 @@ CONFIG_TEST_HEXDUMP=m
CONFIG_TEST_STRING_HELPERS=m
CONFIG_TEST_KSTRTOX=m
CONFIG_TEST_PRINTF=m
CONFIG_TEST_BITMAP=m
CONFIG_TEST_RHASHTABLE=m
CONFIG_TEST_LKM=m
CONFIG_TEST_USER_COPY=m
......@@ -518,7 +522,6 @@ CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_USER=m
......@@ -526,12 +529,9 @@ CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_MCRYPTD=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_CHACHA20POLY1305=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_KEYWRAP=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
......@@ -555,7 +555,6 @@ CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_842=m
CONFIG_CRYPTO_LZ4=m
......
arch/m68k/configs/mac_defconfig
浏览文件 @ 65cbbd03
CONFIG_LOCALVERSION="-mac"
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_FHANDLE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_LOG_BUF_SHIFT=16
......@@ -61,7 +60,6 @@ CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
......@@ -285,7 +283,9 @@ CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
CONFIG_NET_L3_MASTER_DEV=y
CONFIG_AF_KCM=m
# CONFIG_WIRELESS is not set
CONFIG_NET_DEVLINK=m
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
......@@ -357,6 +357,7 @@ CONFIG_MACVTAP=m
CONFIG_IPVLAN=m
CONFIG_VXLAN=m
CONFIG_GENEVE=m
CONFIG_MACSEC=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_VETH=m
......@@ -435,6 +436,7 @@ CONFIG_JFS_FS=m
CONFIG_XFS_FS=m
CONFIG_OCFS2_FS=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
CONFIG_FS_ENCRYPTION=m
CONFIG_FANOTIFY=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
......@@ -451,6 +453,7 @@ CONFIG_VFAT_FS=m
CONFIG_PROC_KCORE=y
CONFIG_PROC_CHILDREN=y
CONFIG_TMPFS=y
CONFIG_ORANGEFS_FS=m
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_ECRYPT_FS_MESSAGING=y
......@@ -532,6 +535,7 @@ CONFIG_TEST_HEXDUMP=m
CONFIG_TEST_STRING_HELPERS=m
CONFIG_TEST_KSTRTOX=m
CONFIG_TEST_PRINTF=m
CONFIG_TEST_BITMAP=m
CONFIG_TEST_RHASHTABLE=m
CONFIG_TEST_LKM=m
CONFIG_TEST_USER_COPY=m
......@@ -540,7 +544,6 @@ CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_USER=m
......@@ -548,12 +551,9 @@ CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_MCRYPTD=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_CHACHA20POLY1305=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_KEYWRAP=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
......@@ -577,7 +577,6 @@ CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_842=m
CONFIG_CRYPTO_LZ4=m
......
arch/m68k/configs/multi_defconfig
浏览文件 @ 65cbbd03
CONFIG_LOCALVERSION="-multi"
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_FHANDLE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_LOG_BUF_SHIFT=16
......@@ -71,7 +70,6 @@ CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
......@@ -295,7 +293,9 @@ CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
CONFIG_NET_L3_MASTER_DEV=y
CONFIG_AF_KCM=m
# CONFIG_WIRELESS is not set
CONFIG_NET_DEVLINK=m
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
......@@ -390,6 +390,7 @@ CONFIG_MACVTAP=m
CONFIG_IPVLAN=m
CONFIG_VXLAN=m
CONFIG_GENEVE=m
CONFIG_MACSEC=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_VETH=m
......@@ -515,6 +516,7 @@ CONFIG_JFS_FS=m
CONFIG_XFS_FS=m
CONFIG_OCFS2_FS=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
CONFIG_FS_ENCRYPTION=m
CONFIG_FANOTIFY=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
......@@ -531,6 +533,7 @@ CONFIG_VFAT_FS=m
CONFIG_PROC_KCORE=y
CONFIG_PROC_CHILDREN=y
CONFIG_TMPFS=y
CONFIG_ORANGEFS_FS=m
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_ECRYPT_FS_MESSAGING=y
......@@ -612,6 +615,7 @@ CONFIG_TEST_HEXDUMP=m
CONFIG_TEST_STRING_HELPERS=m
CONFIG_TEST_KSTRTOX=m
CONFIG_TEST_PRINTF=m
CONFIG_TEST_BITMAP=m
CONFIG_TEST_RHASHTABLE=m
CONFIG_TEST_LKM=m
CONFIG_TEST_USER_COPY=m
......@@ -620,7 +624,6 @@ CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_USER=m
......@@ -628,12 +631,9 @@ CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_MCRYPTD=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_CHACHA20POLY1305=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_KEYWRAP=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
......@@ -657,7 +657,6 @@ CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_842=m
CONFIG_CRYPTO_LZ4=m
......
arch/m68k/configs/mvme147_defconfig
浏览文件 @ 65cbbd03
CONFIG_LOCALVERSION="-mvme147"
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_FHANDLE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_LOG_BUF_SHIFT=16
......@@ -59,7 +58,6 @@ CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
......@@ -280,7 +278,9 @@ CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
CONFIG_NET_L3_MASTER_DEV=y
CONFIG_AF_KCM=m
# CONFIG_WIRELESS is not set
CONFIG_NET_DEVLINK=m
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
......@@ -339,6 +339,7 @@ CONFIG_MACVTAP=m
CONFIG_IPVLAN=m
CONFIG_VXLAN=m
CONFIG_GENEVE=m
CONFIG_MACSEC=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_VETH=m
......@@ -403,6 +404,7 @@ CONFIG_JFS_FS=m
CONFIG_XFS_FS=m
CONFIG_OCFS2_FS=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
CONFIG_FS_ENCRYPTION=m
CONFIG_FANOTIFY=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
......@@ -419,6 +421,7 @@ CONFIG_VFAT_FS=m
CONFIG_PROC_KCORE=y
CONFIG_PROC_CHILDREN=y
CONFIG_TMPFS=y
CONFIG_ORANGEFS_FS=m
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_ECRYPT_FS_MESSAGING=y
......@@ -500,6 +503,7 @@ CONFIG_TEST_HEXDUMP=m
CONFIG_TEST_STRING_HELPERS=m
CONFIG_TEST_KSTRTOX=m
CONFIG_TEST_PRINTF=m
CONFIG_TEST_BITMAP=m
CONFIG_TEST_RHASHTABLE=m
CONFIG_TEST_LKM=m
CONFIG_TEST_USER_COPY=m
......@@ -508,7 +512,6 @@ CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_USER=m
......@@ -516,12 +519,9 @@ CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_MCRYPTD=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_CHACHA20POLY1305=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_KEYWRAP=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
......@@ -545,7 +545,6 @@ CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_842=m
CONFIG_CRYPTO_LZ4=m
......
arch/m68k/configs/mvme16x_defconfig
浏览文件 @ 65cbbd03
CONFIG_LOCALVERSION="-mvme16x"
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_FHANDLE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_LOG_BUF_SHIFT=16
......@@ -60,7 +59,6 @@ CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
......@@ -281,7 +279,9 @@ CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
CONFIG_NET_L3_MASTER_DEV=y
CONFIG_AF_KCM=m
# CONFIG_WIRELESS is not set
CONFIG_NET_DEVLINK=m
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
......@@ -340,6 +340,7 @@ CONFIG_MACVTAP=m
CONFIG_IPVLAN=m
CONFIG_VXLAN=m
CONFIG_GENEVE=m
CONFIG_MACSEC=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_VETH=m
......@@ -403,6 +404,7 @@ CONFIG_JFS_FS=m
CONFIG_XFS_FS=m
CONFIG_OCFS2_FS=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
CONFIG_FS_ENCRYPTION=m
CONFIG_FANOTIFY=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
......@@ -419,6 +421,7 @@ CONFIG_VFAT_FS=m
CONFIG_PROC_KCORE=y
CONFIG_PROC_CHILDREN=y
CONFIG_TMPFS=y
CONFIG_ORANGEFS_FS=m
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_ECRYPT_FS_MESSAGING=y
......@@ -500,6 +503,7 @@ CONFIG_TEST_HEXDUMP=m
CONFIG_TEST_STRING_HELPERS=m
CONFIG_TEST_KSTRTOX=m
CONFIG_TEST_PRINTF=m
CONFIG_TEST_BITMAP=m
CONFIG_TEST_RHASHTABLE=m
CONFIG_TEST_LKM=m
CONFIG_TEST_USER_COPY=m
......@@ -508,7 +512,6 @@ CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_USER=m
......@@ -516,12 +519,9 @@ CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_MCRYPTD=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_CHACHA20POLY1305=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_KEYWRAP=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
......@@ -545,7 +545,6 @@ CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_842=m
CONFIG_CRYPTO_LZ4=m
......
arch/m68k/configs/q40_defconfig
浏览文件 @ 65cbbd03
CONFIG_LOCALVERSION="-q40"
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_FHANDLE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_LOG_BUF_SHIFT=16
......@@ -60,7 +59,6 @@ CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
......@@ -281,7 +279,9 @@ CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
CONFIG_NET_L3_MASTER_DEV=y
CONFIG_AF_KCM=m
# CONFIG_WIRELESS is not set
CONFIG_NET_DEVLINK=m
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
......@@ -346,6 +346,7 @@ CONFIG_MACVTAP=m
CONFIG_IPVLAN=m
CONFIG_VXLAN=m
CONFIG_GENEVE=m
CONFIG_MACSEC=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_VETH=m
......@@ -426,6 +427,7 @@ CONFIG_JFS_FS=m
CONFIG_XFS_FS=m
CONFIG_OCFS2_FS=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
CONFIG_FS_ENCRYPTION=m
CONFIG_FANOTIFY=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
......@@ -442,6 +444,7 @@ CONFIG_VFAT_FS=m
CONFIG_PROC_KCORE=y
CONFIG_PROC_CHILDREN=y
CONFIG_TMPFS=y
CONFIG_ORANGEFS_FS=m
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_ECRYPT_FS_MESSAGING=y
......@@ -523,6 +526,7 @@ CONFIG_TEST_HEXDUMP=m
CONFIG_TEST_STRING_HELPERS=m
CONFIG_TEST_KSTRTOX=m
CONFIG_TEST_PRINTF=m
CONFIG_TEST_BITMAP=m
CONFIG_TEST_RHASHTABLE=m
CONFIG_TEST_LKM=m
CONFIG_TEST_USER_COPY=m
......@@ -531,7 +535,6 @@ CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_USER=m
......@@ -539,12 +542,9 @@ CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_MCRYPTD=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_CHACHA20POLY1305=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_KEYWRAP=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
......@@ -568,7 +568,6 @@ CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_842=m
CONFIG_CRYPTO_LZ4=m
......
arch/m68k/configs/sun3_defconfig
浏览文件 @ 65cbbd03
CONFIG_LOCALVERSION="-sun3"
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_FHANDLE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_LOG_BUF_SHIFT=16
......@@ -57,7 +56,6 @@ CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
......@@ -278,7 +276,9 @@ CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
CONFIG_NET_L3_MASTER_DEV=y
CONFIG_AF_KCM=m
# CONFIG_WIRELESS is not set
CONFIG_NET_DEVLINK=m
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
......@@ -337,6 +337,7 @@ CONFIG_MACVTAP=m
CONFIG_IPVLAN=m
CONFIG_VXLAN=m
CONFIG_GENEVE=m
CONFIG_MACSEC=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_VETH=m
......@@ -405,6 +406,7 @@ CONFIG_JFS_FS=m
CONFIG_XFS_FS=m
CONFIG_OCFS2_FS=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
CONFIG_FS_ENCRYPTION=m
CONFIG_FANOTIFY=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
......@@ -421,6 +423,7 @@ CONFIG_VFAT_FS=m
CONFIG_PROC_KCORE=y
CONFIG_PROC_CHILDREN=y
CONFIG_TMPFS=y
CONFIG_ORANGEFS_FS=m
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_ECRYPT_FS_MESSAGING=y
......@@ -502,6 +505,7 @@ CONFIG_TEST_HEXDUMP=m
CONFIG_TEST_STRING_HELPERS=m
CONFIG_TEST_KSTRTOX=m
CONFIG_TEST_PRINTF=m
CONFIG_TEST_BITMAP=m
CONFIG_TEST_RHASHTABLE=m
CONFIG_TEST_LKM=m
CONFIG_TEST_USER_COPY=m
......@@ -509,7 +513,6 @@ CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_USER=m
......@@ -517,12 +520,9 @@ CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_MCRYPTD=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_CHACHA20POLY1305=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_KEYWRAP=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
......@@ -546,7 +546,6 @@ CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_842=m
CONFIG_CRYPTO_LZ4=m
......
arch/m68k/configs/sun3x_defconfig
浏览文件 @ 65cbbd03
CONFIG_LOCALVERSION="-sun3x"
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_FHANDLE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_LOG_BUF_SHIFT=16
......@@ -57,7 +56,6 @@ CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
......@@ -278,7 +276,9 @@ CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
CONFIG_NET_L3_MASTER_DEV=y
CONFIG_AF_KCM=m
# CONFIG_WIRELESS is not set
CONFIG_NET_DEVLINK=m
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
......@@ -337,6 +337,7 @@ CONFIG_MACVTAP=m
CONFIG_IPVLAN=m
CONFIG_VXLAN=m
CONFIG_GENEVE=m
CONFIG_MACSEC=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_VETH=m
......@@ -405,6 +406,7 @@ CONFIG_JFS_FS=m
CONFIG_XFS_FS=m
CONFIG_OCFS2_FS=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
CONFIG_FS_ENCRYPTION=m
CONFIG_FANOTIFY=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
......@@ -421,6 +423,7 @@ CONFIG_VFAT_FS=m
CONFIG_PROC_KCORE=y
CONFIG_PROC_CHILDREN=y
CONFIG_TMPFS=y
CONFIG_ORANGEFS_FS=m
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_ECRYPT_FS_MESSAGING=y
......@@ -502,6 +505,7 @@ CONFIG_TEST_HEXDUMP=m
CONFIG_TEST_STRING_HELPERS=m
CONFIG_TEST_KSTRTOX=m
CONFIG_TEST_PRINTF=m
CONFIG_TEST_BITMAP=m
CONFIG_TEST_RHASHTABLE=m
CONFIG_TEST_LKM=m
CONFIG_TEST_USER_COPY=m
......@@ -510,7 +514,6 @@ CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_USER=m
......@@ -518,12 +521,9 @@ CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_MCRYPTD=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_CHACHA20POLY1305=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_KEYWRAP=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
......@@ -547,7 +547,6 @@ CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_842=m
CONFIG_CRYPTO_LZ4=m
......
arch/m68k/include/asm/unistd.h
浏览文件 @ 65cbbd03
......@@ -4,7 +4,7 @@
#include <uapi/asm/unistd.h>
#define NR_syscalls 377
#define NR_syscalls 379
#define __ARCH_WANT_OLD_READDIR
#define __ARCH_WANT_OLD_STAT
......
arch/m68k/include/uapi/asm/unistd.h
浏览文件 @ 65cbbd03
......@@ -382,5 +382,7 @@
#define __NR_membarrier 374
#define __NR_mlock2 375
#define __NR_copy_file_range 376
#define __NR_preadv2 377
#define __NR_pwritev2 378
#endif /* _UAPI_ASM_M68K_UNISTD_H_ */
arch/m68k/kernel/syscalltable.S
浏览文件 @ 65cbbd03
......@@ -397,3 +397,5 @@ ENTRY(sys_call_table)
.long sys_membarrier
.long sys_mlock2 /* 375 */
.long sys_copy_file_range
.long sys_preadv2
.long sys_pwritev2
arch/parisc/Kconfig
浏览文件 @ 65cbbd03
......@@ -4,8 +4,8 @@ config PARISC
select ARCH_MIGHT_HAVE_PC_PARPORT
select HAVE_IDE
select HAVE_OPROFILE
select HAVE_FUNCTION_TRACER if 64BIT
select HAVE_FUNCTION_GRAPH_TRACER if 64BIT
select HAVE_FUNCTION_TRACER
select HAVE_FUNCTION_GRAPH_TRACER
select ARCH_WANT_FRAME_POINTERS
select RTC_CLASS
select RTC_DRV_GENERIC
......
arch/parisc/Kconfig.debug
浏览文件 @ 65cbbd03
......@@ -2,9 +2,13 @@ menu "Kernel hacking"
source "lib/Kconfig.debug"
config TRACE_IRQFLAGS_SUPPORT
def_bool y
config DEBUG_RODATA
bool "Write protect kernel read-only data structures"
depends on DEBUG_KERNEL
default y
help
Mark the kernel read-only data as write-protected in the pagetables,
in order to catch accidental (and incorrect) writes to such const
......
arch/parisc/Makefile
浏览文件 @ 65cbbd03
......@@ -62,9 +62,7 @@ cflags-y += -mdisable-fpregs
# Without this, "ld -r" results in .text sections that are too big
# (> 0x40000) for branches to reach stubs.
ifndef CONFIG_FUNCTION_TRACER
cflags-y += -ffunction-sections
endif
cflags-y += -ffunction-sections
# Use long jumps instead of long branches (needed if your linker fails to
# link a too big vmlinux executable). Not enabled for building modules.
......
arch/parisc/include/asm/ftrace.h
浏览文件 @ 65cbbd03
......@@ -4,23 +4,7 @@
#ifndef __ASSEMBLY__
extern void mcount(void);
/*
* Stack of return addresses for functions of a thread.
* Used in struct thread_info
*/
struct ftrace_ret_stack {
unsigned long ret;
unsigned long func;
unsigned long long calltime;
};
/*
* Primary handler of a function return.
* It relays on ftrace_return_to_handler.
* Defined in entry.S
*/
extern void return_to_handler(void);
#define MCOUNT_INSN_SIZE 4
extern unsigned long return_address(unsigned int);
......
arch/parisc/kernel/Makefile
浏览文件 @ 65cbbd03
......@@ -15,11 +15,7 @@ ifdef CONFIG_FUNCTION_TRACER
# Do not profile debug and lowlevel utilities
CFLAGS_REMOVE_ftrace.o = -pg
CFLAGS_REMOVE_cache.o = -pg
CFLAGS_REMOVE_irq.o = -pg
CFLAGS_REMOVE_pacache.o = -pg
CFLAGS_REMOVE_perf.o = -pg
CFLAGS_REMOVE_traps.o = -pg
CFLAGS_REMOVE_unaligned.o = -pg
CFLAGS_REMOVE_unwind.o = -pg
endif
......
arch/parisc/kernel/entry.S
浏览文件 @ 65cbbd03
......@@ -1970,43 +1970,98 @@ pt_regs_ok:
b intr_restore
copy %r25,%r16
.import schedule,code
syscall_do_resched:
BL schedule,%r2
load32 syscall_check_resched,%r2 /* if resched, we start over again */
load32 schedule,%r19
bv %r0(%r19) /* jumps to schedule() */
#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#else
nop
#endif
b syscall_check_resched /* if resched, we start over again */
nop
ENDPROC(syscall_exit)
#ifdef CONFIG_FUNCTION_TRACER
.import ftrace_function_trampoline,code
ENTRY(_mcount)
copy %r3, %arg2
.align L1_CACHE_BYTES
.globl mcount
.type mcount, @function
ENTRY(mcount)
_mcount:
.export _mcount,data
.proc
.callinfo caller,frame=0
.entry
/*
* The 64bit mcount() function pointer needs 4 dwords, of which the
* first two are free. We optimize it here and put 2 instructions for
* calling mcount(), and 2 instructions for ftrace_stub(). That way we
* have all on one L1 cacheline.
*/
b ftrace_function_trampoline
copy %r3, %arg2 /* caller original %sp */
ftrace_stub:
.globl ftrace_stub
.type ftrace_stub, @function
#ifdef CONFIG_64BIT
bve (%rp)
#else
bv %r0(%rp)
#endif
nop
ENDPROC(_mcount)
#ifdef CONFIG_64BIT
.dword mcount
.dword 0 /* code in head.S puts value of global gp here */
#endif
.exit
.procend
ENDPROC(mcount)
.align 8
.globl return_to_handler
.type return_to_handler, @function
ENTRY(return_to_handler)
load32 return_trampoline, %rp
copy %ret0, %arg0
copy %ret1, %arg1
b ftrace_return_to_handler
nop
return_trampoline:
copy %ret0, %rp
copy %r23, %ret0
copy %r24, %ret1
.proc
.callinfo caller,frame=FRAME_SIZE
.entry
.export parisc_return_to_handler,data
parisc_return_to_handler:
copy %r3,%r1
STREG %r0,-RP_OFFSET(%sp) /* store 0 as %rp */
copy %sp,%r3
STREGM %r1,FRAME_SIZE(%sp)
STREG %ret0,8(%r3)
STREG %ret1,16(%r3)
.globl ftrace_stub
ftrace_stub:
#ifdef CONFIG_64BIT
loadgp
#endif
/* call ftrace_return_to_handler(0) */
#ifdef CONFIG_64BIT
ldo -16(%sp),%ret1 /* Reference param save area */
#endif
BL ftrace_return_to_handler,%r2
ldi 0,%r26
copy %ret0,%rp
/* restore original return values */
LDREG 8(%r3),%ret0
LDREG 16(%r3),%ret1
/* return from function */
#ifdef CONFIG_64BIT
bve (%rp)
#else
bv %r0(%rp)
nop
#endif
LDREGM -FRAME_SIZE(%sp),%r3
.exit
.procend
ENDPROC(return_to_handler)
#endif /* CONFIG_FUNCTION_TRACER */
#ifdef CONFIG_IRQSTACKS
......
arch/parisc/kernel/ftrace.c
浏览文件 @ 65cbbd03
/*
* Code for tracing calls in Linux kernel.
* Copyright (C) 2009 Helge Deller <deller@gmx.de>
* Copyright (C) 2009-2016 Helge Deller <deller@gmx.de>
*
* based on code for x86 which is:
* Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com>
......@@ -13,104 +13,21 @@
#include <linux/init.h>
#include <linux/ftrace.h>
#include <asm/assembly.h>
#include <asm/sections.h>
#include <asm/ftrace.h>
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
/* Add a function return address to the trace stack on thread info.*/
static int push_return_trace(unsigned long ret, unsigned long long time,
unsigned long func, int *depth)
{
int index;
if (!current->ret_stack)
return -EBUSY;
/* The return trace stack is full */
if (current->curr_ret_stack == FTRACE_RETFUNC_DEPTH - 1) {
atomic_inc(&current->trace_overrun);
return -EBUSY;
}
index = ++current->curr_ret_stack;
barrier();
current->ret_stack[index].ret = ret;
current->ret_stack[index].func = func;
current->ret_stack[index].calltime = time;
*depth = index;
return 0;
}
/* Retrieve a function return address to the trace stack on thread info.*/
static void pop_return_trace(struct ftrace_graph_ret *trace, unsigned long *ret)
{
int index;
index = current->curr_ret_stack;
if (unlikely(index < 0)) {
ftrace_graph_stop();
WARN_ON(1);
/* Might as well panic, otherwise we have no where to go */
*ret = (unsigned long)
dereference_function_descriptor(&panic);
return;
}
*ret = current->ret_stack[index].ret;
trace->func = current->ret_stack[index].func;
trace->calltime = current->ret_stack[index].calltime;
trace->overrun = atomic_read(&current->trace_overrun);
trace->depth = index;
barrier();
current->curr_ret_stack--;
}
/*
* Send the trace to the ring-buffer.
* @return the original return address.
*/
unsigned long ftrace_return_to_handler(unsigned long retval0,
unsigned long retval1)
{
struct ftrace_graph_ret trace;
unsigned long ret;
pop_return_trace(&trace, &ret);
trace.rettime = local_clock();
ftrace_graph_return(&trace);
if (unlikely(!ret)) {
ftrace_graph_stop();
WARN_ON(1);
/* Might as well panic. What else to do? */
ret = (unsigned long)
dereference_function_descriptor(&panic);
}
/* HACK: we hand over the old functions' return values
in %r23 and %r24. Assembly in entry.S will take care
and move those to their final registers %ret0 and %ret1 */
asm( "copy %0, %%r23 \n\t"
"copy %1, %%r24 \n" : : "r" (retval0), "r" (retval1) );
return ret;
}
/*
* Hook the return address and push it in the stack of return addrs
* in current thread info.
*/
void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
static void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
{
unsigned long old;
unsigned long long calltime;
struct ftrace_graph_ent trace;
extern int parisc_return_to_handler;
if (unlikely(ftrace_graph_is_dead()))
return;
......@@ -119,64 +36,47 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
return;
old = *parent;
*parent = (unsigned long)
dereference_function_descriptor(&return_to_handler);
if (unlikely(!__kernel_text_address(old))) {
ftrace_graph_stop();
*parent = old;
WARN_ON(1);
return;
}
calltime = local_clock();
trace.func = self_addr;
trace.depth = current->curr_ret_stack + 1;
if (push_return_trace(old, calltime,
self_addr, &trace.depth) == -EBUSY) {
*parent = old;
/* Only trace if the calling function expects to */
if (!ftrace_graph_entry(&trace))
return;
}
trace.func = self_addr;
if (ftrace_push_return_trace(old, self_addr, &trace.depth,
0 ) == -EBUSY)
return;
/* Only trace if the calling function expects to */
if (!ftrace_graph_entry(&trace)) {
current->curr_ret_stack--;
*parent = old;
}
/* activate parisc_return_to_handler() as return point */
*parent = (unsigned long) &parisc_return_to_handler;
}
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
void ftrace_function_trampoline(unsigned long parent,
void notrace ftrace_function_trampoline(unsigned long parent,
unsigned long self_addr,
unsigned long org_sp_gr3)
{
extern ftrace_func_t ftrace_trace_function;
extern ftrace_func_t ftrace_trace_function; /* depends on CONFIG_DYNAMIC_FTRACE */
extern int ftrace_graph_entry_stub(struct ftrace_graph_ent *trace);
if (ftrace_trace_function != ftrace_stub) {
ftrace_trace_function(parent, self_addr);
/* struct ftrace_ops *op, struct pt_regs *regs); */
ftrace_trace_function(parent, self_addr, NULL, NULL);
return;
}
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
if (ftrace_graph_entry && ftrace_graph_return) {
unsigned long sp;
if (ftrace_graph_return != (trace_func_graph_ret_t) ftrace_stub ||
ftrace_graph_entry != ftrace_graph_entry_stub) {
unsigned long *parent_rp;
asm volatile ("copy %%r30, %0" : "=r"(sp));
/* sanity check: is stack pointer which we got from
assembler function in entry.S in a reasonable
range compared to current stack pointer? */
if ((sp - org_sp_gr3) > 0x400)
return;
/* calculate pointer to %rp in stack */
parent_rp = (unsigned long *) org_sp_gr3 - 0x10;
parent_rp = (unsigned long *) (org_sp_gr3 - RP_OFFSET);
/* sanity check: parent_rp should hold parent */
if (*parent_rp != parent)
return;
prepare_ftrace_return(parent_rp, self_addr);
return;
}
......
arch/parisc/kernel/head.S
浏览文件 @ 65cbbd03
......@@ -129,6 +129,15 @@ $pgt_fill_loop:
/* And the stack pointer too */
ldo THREAD_SZ_ALGN(%r6),%sp
#if defined(CONFIG_64BIT) && defined(CONFIG_FUNCTION_TRACER)
.import _mcount,data
/* initialize mcount FPTR */
/* Get the global data pointer */
loadgp
load32 PA(_mcount), %r10
std %dp,0x18(%r10)
#endif
#ifdef CONFIG_SMP
/* Set the smp rendezvous address into page zero.
** It would be safer to do this in init_smp_config() but
......
arch/sh/include/asm/smp.h
浏览文件 @ 65cbbd03
......@@ -34,11 +34,6 @@ enum {
DECLARE_PER_CPU(int, cpu_state);
void smp_message_recv(unsigned int msg);
void smp_timer_broadcast(const struct cpumask *mask);
void local_timer_interrupt(void);
void local_timer_setup(unsigned int cpu);
void local_timer_stop(unsigned int cpu);
void arch_send_call_function_single_ipi(int cpu);
void arch_send_call_function_ipi_mask(const struct cpumask *mask);
......
arch/sh/include/asm/topology.h
浏览文件 @ 65cbbd03
......@@ -17,7 +17,7 @@
#define mc_capable() (1)
const struct cpumask *cpu_coregroup_mask(unsigned int cpu);
const struct cpumask *cpu_coregroup_mask(int cpu);
extern cpumask_t cpu_core_map[NR_CPUS];
......
arch/sh/kernel/cpu/sh4a/smp-shx3.c
浏览文件 @ 65cbbd03
......@@ -73,8 +73,6 @@ static void shx3_prepare_cpus(unsigned int max_cpus)
{
int i;
local_timer_setup(0);
BUILD_BUG_ON(SMP_MSG_NR >= 8);
for (i = 0; i < SMP_MSG_NR; i++)
......
arch/sh/kernel/topology.c
浏览文件 @ 65cbbd03
......@@ -21,7 +21,7 @@ static DEFINE_PER_CPU(struct cpu, cpu_devices);
cpumask_t cpu_core_map[NR_CPUS];
EXPORT_SYMBOL(cpu_core_map);
static cpumask_t cpu_coregroup_map(unsigned int cpu)
static cpumask_t cpu_coregroup_map(int cpu)
{
/*
* Presently all SH-X3 SMP cores are multi-cores, so just keep it
......@@ -30,7 +30,7 @@ static cpumask_t cpu_coregroup_map(unsigned int cpu)
return *cpu_possible_mask;
}
const struct cpumask *cpu_coregroup_mask(unsigned int cpu)
const struct cpumask *cpu_coregroup_mask(int cpu)
{
return &cpu_core_map[cpu];
}
......
arch/x86/boot/compressed/Makefile
浏览文件 @ 65cbbd03
......@@ -26,7 +26,7 @@ targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma \
vmlinux.bin.xz vmlinux.bin.lzo vmlinux.bin.lz4
KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2
KBUILD_CFLAGS += -fno-strict-aliasing -fPIC
KBUILD_CFLAGS += -fno-strict-aliasing $(call cc-option, -fPIE, -fPIC)
KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
cflags-$(CONFIG_X86_32) := -march=i386
cflags-$(CONFIG_X86_64) := -mcmodel=small
......@@ -40,6 +40,18 @@ GCOV_PROFILE := n
UBSAN_SANITIZE :=n
LDFLAGS := -m elf_$(UTS_MACHINE)
ifeq ($(CONFIG_RELOCATABLE),y)
# If kernel is relocatable, build compressed kernel as PIE.
ifeq ($(CONFIG_X86_32),y)
LDFLAGS += $(call ld-option, -pie) $(call ld-option, --no-dynamic-linker)
else
# To build 64-bit compressed kernel as PIE, we disable relocation
# overflow check to avoid relocation overflow error with a new linker
# command-line option, -z noreloc-overflow.
LDFLAGS += $(shell $(LD) --help 2>&1 | grep -q "\-z noreloc-overflow" \
&& echo "-z noreloc-overflow -pie --no-dynamic-linker")
endif
endif
LDFLAGS_vmlinux := -T
hostprogs-y := mkpiggy
......
arch/x86/boot/compressed/head_32.S
浏览文件 @ 65cbbd03
......@@ -31,6 +31,34 @@
#include <asm/asm-offsets.h>
#include <asm/bootparam.h>
/*
* The 32-bit x86 assembler in binutils 2.26 will generate R_386_GOT32X
* relocation to get the symbol address in PIC. When the compressed x86
* kernel isn't built as PIC, the linker optimizes R_386_GOT32X
* relocations to their fixed symbol addresses. However, when the
* compressed x86 kernel is loaded at a different address, it leads
* to the following load failure:
*
* Failed to allocate space for phdrs
*
* during the decompression stage.
*
* If the compressed x86 kernel is relocatable at run-time, it should be
* compiled with -fPIE, instead of -fPIC, if possible and should be built as
* Position Independent Executable (PIE) so that linker won't optimize
* R_386_GOT32X relocation to its fixed symbol address. Older
* linkers generate R_386_32 relocations against locally defined symbols,
* _bss, _ebss, _got and _egot, in PIE. It isn't wrong, just less
* optimal than R_386_RELATIVE. But the x86 kernel fails to properly handle
* R_386_32 relocations when relocating the kernel. To generate
* R_386_RELATIVE relocations, we mark _bss, _ebss, _got and _egot as
* hidden:
*/
.hidden _bss
.hidden _ebss
.hidden _got
.hidden _egot
__HEAD
ENTRY(startup_32)
#ifdef CONFIG_EFI_STUB
......
arch/x86/boot/compressed/head_64.S
浏览文件 @ 65cbbd03
......@@ -33,6 +33,14 @@
#include <asm/asm-offsets.h>
#include <asm/bootparam.h>
/*
* Locally defined symbols should be marked hidden:
*/
.hidden _bss
.hidden _ebss
.hidden _got
.hidden _egot
__HEAD
.code32
ENTRY(startup_32)
......
arch/x86/events/intel/core.c
浏览文件 @ 65cbbd03
......@@ -3639,6 +3639,7 @@ __init int intel_pmu_init(void)
case 78: /* 14nm Skylake Mobile */
case 94: /* 14nm Skylake Desktop */
case 85: /* 14nm Skylake Server */
x86_pmu.late_ack = true;
memcpy(hw_cache_event_ids, skl_hw_cache_event_ids, sizeof(hw_cache_event_ids));
memcpy(hw_cache_extra_regs, skl_hw_cache_extra_regs, sizeof(hw_cache_extra_regs));
......
arch/x86/events/intel/rapl.c
浏览文件 @ 65cbbd03
......@@ -744,6 +744,7 @@ static const struct x86_cpu_id rapl_cpu_match[] __initconst = {
X86_RAPL_MODEL_MATCH(79, hsx_rapl_init), /* Broadwell-Server */
X86_RAPL_MODEL_MATCH(60, hsw_rapl_init), /* Haswell */
X86_RAPL_MODEL_MATCH(69, hsw_rapl_init), /* Haswell-Celeron */
X86_RAPL_MODEL_MATCH(70, hsw_rapl_init), /* Haswell GT3e */
X86_RAPL_MODEL_MATCH(61, hsw_rapl_init), /* Broadwell */
X86_RAPL_MODEL_MATCH(71, hsw_rapl_init), /* Broadwell-H */
X86_RAPL_MODEL_MATCH(45, snbep_rapl_init), /* Sandy Bridge-EP */
......
arch/x86/kernel/cpu/mcheck/mce-genpool.c
浏览文件 @ 65cbbd03
......@@ -29,7 +29,7 @@ static char gen_pool_buf[MCE_POOLSZ];
void mce_gen_pool_process(void)
{
struct llist_node *head;
struct mce_evt_llist *node;
struct mce_evt_llist *node, *tmp;
struct mce *mce;
head = llist_del_all(&mce_event_llist);
......@@ -37,7 +37,7 @@ void mce_gen_pool_process(void)
return;
head = llist_reverse_order(head);
llist_for_each_entry(node, head, llnode) {
llist_for_each_entry_safe(node, tmp, head, llnode) {
mce = &node->mce;
atomic_notifier_call_chain(&x86_mce_decoder_chain, 0, mce);
gen_pool_free(mce_evt_pool, (unsigned long)node, sizeof(*node));
......
arch/x86/kernel/setup.c
浏览文件 @ 65cbbd03
......@@ -146,6 +146,31 @@ int default_check_phys_apicid_present(int phys_apicid)
struct boot_params boot_params;
/*
* Machine setup..
*/
static struct resource data_resource = {
.name = "Kernel data",
.start = 0,
.end = 0,
.flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM
};
static struct resource code_resource = {
.name = "Kernel code",
.start = 0,
.end = 0,
.flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM
};
static struct resource bss_resource = {
.name = "Kernel bss",
.start = 0,
.end = 0,
.flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM
};
#ifdef CONFIG_X86_32
/* cpu data as detected by the assembly code in head.S */
struct cpuinfo_x86 new_cpu_data = {
......@@ -924,6 +949,13 @@ void __init setup_arch(char **cmdline_p)
mpx_mm_init(&init_mm);
code_resource.start = __pa_symbol(_text);
code_resource.end = __pa_symbol(_etext)-1;
data_resource.start = __pa_symbol(_etext);
data_resource.end = __pa_symbol(_edata)-1;
bss_resource.start = __pa_symbol(__bss_start);
bss_resource.end = __pa_symbol(__bss_stop)-1;
#ifdef CONFIG_CMDLINE_BOOL
#ifdef CONFIG_CMDLINE_OVERRIDE
strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
......@@ -987,6 +1019,11 @@ void __init setup_arch(char **cmdline_p)
x86_init.resources.probe_roms();
/* after parse_early_param, so could debug it */
insert_resource(&iomem_resource, &code_resource);
insert_resource(&iomem_resource, &data_resource);
insert_resource(&iomem_resource, &bss_resource);
e820_add_kernel_range();
trim_bios_range();
#ifdef CONFIG_X86_32
......
arch/x86/kvm/cpuid.c
浏览文件 @ 65cbbd03
......@@ -534,6 +534,7 @@ static inline int __do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
do_cpuid_1_ent(&entry[i], function, idx);
if (idx == 1) {
entry[i].eax &= kvm_cpuid_D_1_eax_x86_features;
cpuid_mask(&entry[i].eax, CPUID_D_1_EAX);
entry[i].ebx = 0;
if (entry[i].eax & (F(XSAVES)|F(XSAVEC)))
entry[i].ebx =
......
arch/x86/kvm/mmu.h
浏览文件 @ 65cbbd03
......@@ -173,10 +173,9 @@ static inline u8 permission_fault(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu,
int index = (pfec >> 1) +
(smap >> (X86_EFLAGS_AC_BIT - PFERR_RSVD_BIT + 1));
bool fault = (mmu->permissions[index] >> pte_access) & 1;
u32 errcode = PFERR_PRESENT_MASK;
WARN_ON(pfec & (PFERR_PK_MASK | PFERR_RSVD_MASK));
pfec |= PFERR_PRESENT_MASK;
if (unlikely(mmu->pkru_mask)) {
u32 pkru_bits, offset;
......@@ -189,15 +188,15 @@ static inline u8 permission_fault(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu,
pkru_bits = (kvm_read_pkru(vcpu) >> (pte_pkey * 2)) & 3;
/* clear present bit, replace PFEC.RSVD with ACC_USER_MASK. */
offset = pfec - 1 +
offset = (pfec & ~1) +
((pte_access & PT_USER_MASK) << (PFERR_RSVD_BIT - PT_USER_SHIFT));
pkru_bits &= mmu->pkru_mask >> offset;
pfec |= -pkru_bits & PFERR_PK_MASK;
errcode |= -pkru_bits & PFERR_PK_MASK;
fault |= (pkru_bits != 0);
}
return -(uint32_t)fault & pfec;
return -(u32)fault & errcode;
}
void kvm_mmu_invalidate_zap_all_pages(struct kvm *kvm);
......
arch/x86/kvm/paging_tmpl.h
浏览文件 @ 65cbbd03
......@@ -360,7 +360,7 @@ static int FNAME(walk_addr_generic)(struct guest_walker *walker,
goto error;
if (unlikely(is_rsvd_bits_set(mmu, pte, walker->level))) {
errcode |= PFERR_RSVD_MASK | PFERR_PRESENT_MASK;
errcode = PFERR_RSVD_MASK | PFERR_PRESENT_MASK;
goto error;
}
......
arch/x86/kvm/x86.c
浏览文件 @ 65cbbd03
......@@ -700,7 +700,6 @@ static int __kvm_set_xcr(struct kvm_vcpu *vcpu, u32 index, u64 xcr)
if ((xcr0 & XFEATURE_MASK_AVX512) != XFEATURE_MASK_AVX512)
return 1;
}
kvm_put_guest_xcr0(vcpu);
vcpu->arch.xcr0 = xcr0;
if ((xcr0 ^ old_xcr0) & XFEATURE_MASK_EXTEND)
......@@ -6590,8 +6589,6 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
kvm_x86_ops->prepare_guest_switch(vcpu);
if (vcpu->fpu_active)
kvm_load_guest_fpu(vcpu);
kvm_load_guest_xcr0(vcpu);
vcpu->mode = IN_GUEST_MODE;
srcu_read_unlock(&vcpu->kvm->srcu, vcpu->srcu_idx);
......@@ -6618,6 +6615,8 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
goto cancel_injection;
}
kvm_load_guest_xcr0(vcpu);
if (req_immediate_exit)
smp_send_reschedule(vcpu->cpu);
......@@ -6667,6 +6666,8 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
vcpu->mode = OUTSIDE_GUEST_MODE;
smp_wmb();
kvm_put_guest_xcr0(vcpu);
/* Interrupt is enabled by handle_external_intr() */
kvm_x86_ops->handle_external_intr(vcpu);
......@@ -7314,7 +7315,6 @@ void kvm_load_guest_fpu(struct kvm_vcpu *vcpu)
* and assume host would use all available bits.
* Guest xcr0 would be loaded later.
*/
kvm_put_guest_xcr0(vcpu);
vcpu->guest_fpu_loaded = 1;
__kernel_fpu_begin();
__copy_kernel_to_fpregs(&vcpu->arch.guest_fpu.state);
......@@ -7323,8 +7323,6 @@ void kvm_load_guest_fpu(struct kvm_vcpu *vcpu)
void kvm_put_guest_fpu(struct kvm_vcpu *vcpu)
{
kvm_put_guest_xcr0(vcpu);
if (!vcpu->guest_fpu_loaded) {
vcpu->fpu_counter = 0;
return;
......
block/partition-generic.c
浏览文件 @ 65cbbd03
......@@ -361,15 +361,20 @@ struct hd_struct *add_partition(struct gendisk *disk, int partno,
goto out_del;
}
err = hd_ref_init(p);
if (err) {
if (flags & ADDPART_FLAG_WHOLEDISK)
goto out_remove_file;
goto out_del;
}
/* everything is up and running, commence */
rcu_assign_pointer(ptbl->part[partno], p);
/* suppress uevent if the disk suppresses it */
if (!dev_get_uevent_suppress(ddev))
kobject_uevent(&pdev->kobj, KOBJ_ADD);
if (!hd_ref_init(p))
return p;
return p;
out_free_info:
free_part_info(p);
......@@ -378,6 +383,8 @@ struct hd_struct *add_partition(struct gendisk *disk, int partno,
out_free:
kfree(p);
return ERR_PTR(err);
out_remove_file:
device_remove_file(pdev, &dev_attr_whole_disk);
out_del:
kobject_put(p->holder_dir);
device_del(pdev);
......
drivers/block/loop.c
浏览文件 @ 65cbbd03
......@@ -488,6 +488,12 @@ static int lo_rw_aio(struct loop_device *lo, struct loop_cmd *cmd,
bvec = __bvec_iter_bvec(bio->bi_io_vec, bio->bi_iter);
iov_iter_bvec(&iter, ITER_BVEC | rw, bvec,
bio_segments(bio), blk_rq_bytes(cmd->rq));
/*
* This bio may be started from the middle of the 'bvec'
* because of bio splitting, so offset from the bvec must
* be passed to iov iterator
*/
iter.iov_offset = bio->bi_iter.bi_bvec_done;
cmd->iocb.ki_pos = pos;
cmd->iocb.ki_filp = file;
......
drivers/bus/mvebu-mbus.c
浏览文件 @ 65cbbd03
......@@ -972,7 +972,7 @@ int mvebu_mbus_get_dram_win_info(phys_addr_t phyaddr, u8 *target, u8 *attr)
}
}
pr_err("invalid dram address 0x%x\n", phyaddr);
pr_err("invalid dram address %pa\n", &phyaddr);
return -EINVAL;
}
EXPORT_SYMBOL_GPL(mvebu_mbus_get_dram_win_info);
......
drivers/bus/uniphier-system-bus.c
浏览文件 @ 65cbbd03
......@@ -108,7 +108,7 @@ static int uniphier_system_bus_check_overlap(
for (i = 0; i < ARRAY_SIZE(priv->bank); i++) {
for (j = i + 1; j < ARRAY_SIZE(priv->bank); j++) {
if (priv->bank[i].end > priv->bank[j].base ||
if (priv->bank[i].end > priv->bank[j].base &&
priv->bank[i].base < priv->bank[j].end) {
dev_err(priv->dev,
"region overlap between bank%d and bank%d\n",
......
drivers/char/hw_random/bcm63xx-rng.c
浏览文件 @ 65cbbd03
......@@ -12,6 +12,7 @@
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/hw_random.h>
#include <linux/of.h>
#define RNG_CTRL 0x00
#define RNG_EN (1 << 0)
......
drivers/dma/dw/core.c
浏览文件 @ 65cbbd03
......@@ -130,26 +130,14 @@ static void dwc_desc_put(struct dw_dma_chan *dwc, struct dw_desc *desc)
static void dwc_initialize(struct dw_dma_chan *dwc)
{
struct dw_dma *dw = to_dw_dma(dwc->chan.device);
struct dw_dma_slave *dws = dwc->chan.private;
u32 cfghi = DWC_CFGH_FIFO_MODE;
u32 cfglo = DWC_CFGL_CH_PRIOR(dwc->priority);
if (dwc->initialized == true)
return;
if (dws) {
/*
* We need controller-specific data to set up slave
* transfers.
*/
BUG_ON(!dws->dma_dev || dws->dma_dev != dw->dma.dev);
cfghi |= DWC_CFGH_DST_PER(dws->dst_id);
cfghi |= DWC_CFGH_SRC_PER(dws->src_id);
} else {
cfghi |= DWC_CFGH_DST_PER(dwc->dst_id);
cfghi |= DWC_CFGH_SRC_PER(dwc->src_id);
}
cfghi |= DWC_CFGH_DST_PER(dwc->dst_id);
cfghi |= DWC_CFGH_SRC_PER(dwc->src_id);
channel_writel(dwc, CFG_LO, cfglo);
channel_writel(dwc, CFG_HI, cfghi);
......@@ -941,7 +929,7 @@ bool dw_dma_filter(struct dma_chan *chan, void *param)
struct dw_dma_chan *dwc = to_dw_dma_chan(chan);
struct dw_dma_slave *dws = param;
if (!dws || dws->dma_dev != chan->device->dev)
if (dws->dma_dev != chan->device->dev)
return false;
/* We have to copy data since dws can be temporary storage */
......@@ -1165,6 +1153,14 @@ static int dwc_alloc_chan_resources(struct dma_chan *chan)
* doesn't mean what you think it means), and status writeback.
*/
/*
* We need controller-specific data to set up slave transfers.
*/
if (chan->private && !dw_dma_filter(chan, chan->private)) {
dev_warn(chan2dev(chan), "Wrong controller-specific data\n");
return -EINVAL;
}
/* Enable controller here if needed */
if (!dw->in_use)
dw_dma_on(dw);
......@@ -1226,6 +1222,14 @@ static void dwc_free_chan_resources(struct dma_chan *chan)
spin_lock_irqsave(&dwc->lock, flags);
list_splice_init(&dwc->free_list, &list);
dwc->descs_allocated = 0;
/* Clear custom channel configuration */
dwc->src_id = 0;
dwc->dst_id = 0;
dwc->src_master = 0;
dwc->dst_master = 0;
dwc->initialized = false;
/* Disable interrupts */
......
drivers/dma/edma.c
浏览文件 @ 65cbbd03
......@@ -1238,6 +1238,7 @@ static struct dma_async_tx_descriptor *edma_prep_dma_cyclic(
struct edma_desc *edesc;
dma_addr_t src_addr, dst_addr;
enum dma_slave_buswidth dev_width;
bool use_intermediate = false;
u32 burst;
int i, ret, nslots;
......@@ -1279,8 +1280,21 @@ static struct dma_async_tx_descriptor *edma_prep_dma_cyclic(
* but the synchronization is difficult to achieve with Cyclic and
* cannot be guaranteed, so we error out early.
*/
if (nslots > MAX_NR_SG)
return NULL;
if (nslots > MAX_NR_SG) {
/*
* If the burst and period sizes are the same, we can put
* the full buffer into a single period and activate
* intermediate interrupts. This will produce interrupts
* after each burst, which is also after each desired period.
*/
if (burst == period_len) {
period_len = buf_len;
nslots = 2;
use_intermediate = true;
} else {
return NULL;
}
}
edesc = kzalloc(sizeof(*edesc) + nslots * sizeof(edesc->pset[0]),
GFP_ATOMIC);
......@@ -1358,8 +1372,13 @@ static struct dma_async_tx_descriptor *edma_prep_dma_cyclic(
/*
* Enable period interrupt only if it is requested
*/
if (tx_flags & DMA_PREP_INTERRUPT)
if (tx_flags & DMA_PREP_INTERRUPT) {
edesc->pset[i].param.opt |= TCINTEN;
/* Also enable intermediate interrupts if necessary */
if (use_intermediate)
edesc->pset[i].param.opt |= ITCINTEN;
}
}
/* Place the cyclic channel to highest priority queue */
......@@ -1570,32 +1589,6 @@ static irqreturn_t dma_ccerr_handler(int irq, void *data)
return IRQ_HANDLED;
}
static void edma_tc_set_pm_state(struct edma_tc *tc, bool enable)
{
struct platform_device *tc_pdev;
int ret;
if (!IS_ENABLED(CONFIG_OF) || !tc)
return;
tc_pdev = of_find_device_by_node(tc->node);
if (!tc_pdev) {
pr_err("%s: TPTC device is not found\n", __func__);
return;
}
if (!pm_runtime_enabled(&tc_pdev->dev))
pm_runtime_enable(&tc_pdev->dev);
if (enable)
ret = pm_runtime_get_sync(&tc_pdev->dev);
else
ret = pm_runtime_put_sync(&tc_pdev->dev);
if (ret < 0)
pr_err("%s: pm_runtime_%s_sync() failed for %s\n", __func__,
enable ? "get" : "put", dev_name(&tc_pdev->dev));
}
/* Alloc channel resources */
static int edma_alloc_chan_resources(struct dma_chan *chan)
{
......@@ -1632,8 +1625,6 @@ static int edma_alloc_chan_resources(struct dma_chan *chan)
EDMA_CHAN_SLOT(echan->ch_num), chan->chan_id,
echan->hw_triggered ? "HW" : "SW");
edma_tc_set_pm_state(echan->tc, true);
return 0;
err_slot:
......@@ -1670,7 +1661,6 @@ static void edma_free_chan_resources(struct dma_chan *chan)
echan->alloced = false;
}
edma_tc_set_pm_state(echan->tc, false);
echan->tc = NULL;
echan->hw_triggered = false;
......@@ -2417,10 +2407,8 @@ static int edma_pm_suspend(struct device *dev)
int i;
for (i = 0; i < ecc->num_channels; i++) {
if (echan[i].alloced) {
if (echan[i].alloced)
edma_setup_interrupt(&echan[i], false);
edma_tc_set_pm_state(echan[i].tc, false);
}
}
return 0;
......@@ -2450,8 +2438,6 @@ static int edma_pm_resume(struct device *dev)
/* Set up channel -> slot mapping for the entry slot */
edma_set_chmap(&echan[i], echan[i].slot[0]);
edma_tc_set_pm_state(echan[i].tc, true);
}
}
......@@ -2475,7 +2461,8 @@ static struct platform_driver edma_driver = {
static int edma_tptc_probe(struct platform_device *pdev)
{
return 0;
pm_runtime_enable(&pdev->dev);
return pm_runtime_get_sync(&pdev->dev);
}
static struct platform_driver edma_tptc_driver = {
......
drivers/dma/hsu/hsu.c
浏览文件 @ 65cbbd03
......@@ -64,10 +64,10 @@ static void hsu_dma_chan_start(struct hsu_dma_chan *hsuc)
if (hsuc->direction == DMA_MEM_TO_DEV) {
bsr = config->dst_maxburst;
mtsr = config->dst_addr_width;
mtsr = config->src_addr_width;
} else if (hsuc->direction == DMA_DEV_TO_MEM) {
bsr = config->src_maxburst;
mtsr = config->src_addr_width;
mtsr = config->dst_addr_width;
}
hsu_chan_disable(hsuc);
......@@ -135,7 +135,7 @@ static u32 hsu_dma_chan_get_sr(struct hsu_dma_chan *hsuc)
sr = hsu_chan_readl(hsuc, HSU_CH_SR);
spin_unlock_irqrestore(&hsuc->vchan.lock, flags);
return sr;
return sr & ~(HSU_CH_SR_DESCE_ANY | HSU_CH_SR_CDESC_ANY);
}
irqreturn_t hsu_dma_irq(struct hsu_dma_chip *chip, unsigned short nr)
......@@ -254,10 +254,13 @@ static void hsu_dma_issue_pending(struct dma_chan *chan)
static size_t hsu_dma_active_desc_size(struct hsu_dma_chan *hsuc)
{
struct hsu_dma_desc *desc = hsuc->desc;
size_t bytes = desc->length;
size_t bytes = 0;
int i;
i = desc->active % HSU_DMA_CHAN_NR_DESC;
for (i = desc->active; i < desc->nents; i++)
bytes += desc->sg[i].len;
i = HSU_DMA_CHAN_NR_DESC - 1;
do {
bytes += hsu_chan_readl(hsuc, HSU_CH_DxTSR(i));
} while (--i >= 0);
......
drivers/dma/hsu/hsu.h
浏览文件 @ 65cbbd03
......@@ -41,6 +41,9 @@
#define HSU_CH_SR_DESCTO(x) BIT(8 + (x))
#define HSU_CH_SR_DESCTO_ANY (BIT(11) | BIT(10) | BIT(9) | BIT(8))
#define HSU_CH_SR_CHE BIT(15)
#define HSU_CH_SR_DESCE(x) BIT(16 + (x))
#define HSU_CH_SR_DESCE_ANY (BIT(19) | BIT(18) | BIT(17) | BIT(16))
#define HSU_CH_SR_CDESC_ANY (BIT(31) | BIT(30))
/* Bits in HSU_CH_CR */
#define HSU_CH_CR_CHA BIT(0)
......
drivers/dma/omap-dma.c
浏览文件 @ 65cbbd03
......@@ -48,6 +48,7 @@ struct omap_chan {
unsigned dma_sig;
bool cyclic;
bool paused;
bool running;
int dma_ch;
struct omap_desc *desc;
......@@ -294,6 +295,8 @@ static void omap_dma_start(struct omap_chan *c, struct omap_desc *d)
/* Enable channel */
omap_dma_chan_write(c, CCR, d->ccr | CCR_ENABLE);
c->running = true;
}
static void omap_dma_stop(struct omap_chan *c)
......@@ -355,6 +358,8 @@ static void omap_dma_stop(struct omap_chan *c)
omap_dma_chan_write(c, CLNK_CTRL, val);
}
c->running = false;
}
static void omap_dma_start_sg(struct omap_chan *c, struct omap_desc *d,
......@@ -673,15 +678,20 @@ static enum dma_status omap_dma_tx_status(struct dma_chan *chan,
struct omap_chan *c = to_omap_dma_chan(chan);
struct virt_dma_desc *vd;
enum dma_status ret;
uint32_t ccr;
unsigned long flags;
ccr = omap_dma_chan_read(c, CCR);
/* The channel is no longer active, handle the completion right away */
if (!(ccr & CCR_ENABLE))
omap_dma_callback(c->dma_ch, 0, c);
ret = dma_cookie_status(chan, cookie, txstate);
if (!c->paused && c->running) {
uint32_t ccr = omap_dma_chan_read(c, CCR);
/*
* The channel is no longer active, set the return value
* accordingly
*/
if (!(ccr & CCR_ENABLE))
ret = DMA_COMPLETE;
}
if (ret == DMA_COMPLETE || !txstate)
return ret;
......@@ -945,9 +955,7 @@ static struct dma_async_tx_descriptor *omap_dma_prep_dma_memcpy(
d->ccr = c->ccr;
d->ccr |= CCR_DST_AMODE_POSTINC | CCR_SRC_AMODE_POSTINC;
d->cicr = CICR_DROP_IE;
if (tx_flags & DMA_PREP_INTERRUPT)
d->cicr |= CICR_FRAME_IE;
d->cicr = CICR_DROP_IE | CICR_FRAME_IE;
d->csdp = data_type;
......
drivers/dma/xilinx/xilinx_vdma.c
浏览文件 @ 65cbbd03
......@@ -1236,7 +1236,7 @@ static struct dma_chan *of_dma_xilinx_xlate(struct of_phandle_args *dma_spec,
struct xilinx_vdma_device *xdev = ofdma->of_dma_data;
int chan_id = dma_spec->args[0];
if (chan_id >= XILINX_VDMA_MAX_CHANS_PER_DEVICE)
if (chan_id >= XILINX_VDMA_MAX_CHANS_PER_DEVICE || !xdev->chan[chan_id])
return NULL;
return dma_get_slave_channel(&xdev->chan[chan_id]->common);
......
drivers/extcon/extcon-palmas.c
浏览文件 @ 65cbbd03
......@@ -348,8 +348,7 @@ static int palmas_usb_probe(struct platform_device *pdev)
palmas_vbus_irq_handler,
IRQF_TRIGGER_FALLING |
IRQF_TRIGGER_RISING |
IRQF_ONESHOT |
IRQF_EARLY_RESUME,
IRQF_ONESHOT,
"palmas_usb_vbus",
palmas_usb);
if (status < 0) {
......
drivers/firmware/efi/arm-init.c
浏览文件 @ 65cbbd03
......@@ -203,7 +203,19 @@ void __init efi_init(void)
reserve_regions();
early_memunmap(memmap.map, params.mmap_size);
memblock_mark_nomap(params.mmap & PAGE_MASK,
PAGE_ALIGN(params.mmap_size +
(params.mmap & ~PAGE_MASK)));
if (IS_ENABLED(CONFIG_ARM)) {
/*
* ARM currently does not allow ioremap_cache() to be called on
* memory regions that are covered by struct page. So remove the
* UEFI memory map from the linear mapping.
*/
memblock_mark_nomap(params.mmap & PAGE_MASK,
PAGE_ALIGN(params.mmap_size +
(params.mmap & ~PAGE_MASK)));
} else {
memblock_reserve(params.mmap & PAGE_MASK,
PAGE_ALIGN(params.mmap_size +
(params.mmap & ~PAGE_MASK)));
}
}
drivers/gpu/drm/amd/amdgpu/amdgpu.h
浏览文件 @ 65cbbd03
......@@ -2034,6 +2034,7 @@ struct amdgpu_device {
/* tracking pinned memory */
u64 vram_pin_size;
u64 invisible_pin_size;
u64 gart_pin_size;
/* amdkfd interface */
......
drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
浏览文件 @ 65cbbd03
......@@ -384,7 +384,7 @@ static int amdgpu_info_ioctl(struct drm_device *dev, void *data, struct drm_file
vram_gtt.vram_size = adev->mc.real_vram_size;
vram_gtt.vram_size -= adev->vram_pin_size;
vram_gtt.vram_cpu_accessible_size = adev->mc.visible_vram_size;
vram_gtt.vram_cpu_accessible_size -= adev->vram_pin_size;
vram_gtt.vram_cpu_accessible_size -= (adev->vram_pin_size - adev->invisible_pin_size);
vram_gtt.gtt_size = adev->mc.gtt_size;
vram_gtt.gtt_size -= adev->gart_pin_size;
return copy_to_user(out, &vram_gtt,
......
drivers/gpu/drm/amd/amdgpu/amdgpu_object.c
浏览文件 @ 65cbbd03
......@@ -424,9 +424,11 @@ int amdgpu_bo_pin_restricted(struct amdgpu_bo *bo, u32 domain,
bo->pin_count = 1;
if (gpu_addr != NULL)
*gpu_addr = amdgpu_bo_gpu_offset(bo);
if (domain == AMDGPU_GEM_DOMAIN_VRAM)
if (domain == AMDGPU_GEM_DOMAIN_VRAM) {
bo->adev->vram_pin_size += amdgpu_bo_size(bo);
else
if (bo->flags & AMDGPU_GEM_CREATE_NO_CPU_ACCESS)
bo->adev->invisible_pin_size += amdgpu_bo_size(bo);
} else
bo->adev->gart_pin_size += amdgpu_bo_size(bo);
} else {
dev_err(bo->adev->dev, "%p pin failed\n", bo);
......@@ -456,9 +458,11 @@ int amdgpu_bo_unpin(struct amdgpu_bo *bo)
}
r = ttm_bo_validate(&bo->tbo, &bo->placement, false, false);
if (likely(r == 0)) {
if (bo->tbo.mem.mem_type == TTM_PL_VRAM)
if (bo->tbo.mem.mem_type == TTM_PL_VRAM) {
bo->adev->vram_pin_size -= amdgpu_bo_size(bo);
else
if (bo->flags & AMDGPU_GEM_CREATE_NO_CPU_ACCESS)
bo->adev->invisible_pin_size -= amdgpu_bo_size(bo);
} else
bo->adev->gart_pin_size -= amdgpu_bo_size(bo);
} else {
dev_err(bo->adev->dev, "%p validate failed for unpin\n", bo);
......
drivers/gpu/drm/amd/amdgpu/tonga_ih.c
浏览文件 @ 65cbbd03
......@@ -307,7 +307,7 @@ static int tonga_ih_sw_fini(void *handle)
amdgpu_irq_fini(adev);
amdgpu_ih_ring_fini(adev);
amdgpu_irq_add_domain(adev);
amdgpu_irq_remove_domain(adev);
return 0;
}
......
drivers/gpu/drm/drm_edid.c
浏览文件 @ 65cbbd03
......@@ -205,7 +205,7 @@ static const struct drm_display_mode drm_dmt_modes[] = {
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x0f - 1024x768@43Hz, interlace */
{ DRM_MODE("1024x768i", DRM_MODE_TYPE_DRIVER, 44900, 1024, 1032,
1208, 1264, 0, 768, 768, 772, 817, 0,
1208, 1264, 0, 768, 768, 776, 817, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC |
DRM_MODE_FLAG_INTERLACE) },
/* 0x10 - 1024x768@60Hz */
......@@ -522,12 +522,12 @@ static const struct drm_display_mode edid_est_modes[] = {
720, 840, 0, 480, 481, 484, 500, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@75Hz */
{ DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 31500, 640, 664,
704, 832, 0, 480, 489, 491, 520, 0,
704, 832, 0, 480, 489, 492, 520, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@72Hz */
{ DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 30240, 640, 704,
768, 864, 0, 480, 483, 486, 525, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@67Hz */
{ DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 25200, 640, 656,
{ DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 25175, 640, 656,
752, 800, 0, 480, 490, 492, 525, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@60Hz */
{ DRM_MODE("720x400", DRM_MODE_TYPE_DRIVER, 35500, 720, 738,
......@@ -539,7 +539,7 @@ static const struct drm_display_mode edid_est_modes[] = {
{ DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 135000, 1280, 1296,
1440, 1688, 0, 1024, 1025, 1028, 1066, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 1280x1024@75Hz */
{ DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 78800, 1024, 1040,
{ DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 78750, 1024, 1040,
1136, 1312, 0, 768, 769, 772, 800, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 1024x768@75Hz */
{ DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 75000, 1024, 1048,
......@@ -2241,7 +2241,7 @@ drm_est3_modes(struct drm_connector *connector, struct detailed_timing *timing)
{
int i, j, m, modes = 0;
struct drm_display_mode *mode;
u8 *est = ((u8 *)timing) + 5;
u8 *est = ((u8 *)timing) + 6;
for (i = 0; i < 6; i++) {
for (j = 7; j >= 0; j--) {
......
drivers/gpu/drm/exynos/Kconfig
浏览文件 @ 65cbbd03
......@@ -94,7 +94,7 @@ comment "Sub-drivers"
config DRM_EXYNOS_G2D
bool "G2D"
depends on !VIDEO_SAMSUNG_S5P_G2D
depends on VIDEO_SAMSUNG_S5P_G2D=n
select FRAME_VECTOR
help
Choose this option if you want to use Exynos G2D for DRM.
......
drivers/gpu/drm/exynos/Makefile
浏览文件 @ 65cbbd03
......@@ -2,10 +2,10 @@
# Makefile for the drm device driver. This driver provides support for the
# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
exynosdrm-y := exynos_drm_drv.o exynos_drm_crtc.o exynos_drm_fbdev.o \
exynos_drm_fb.o exynos_drm_gem.o exynos_drm_core.o \
exynos_drm_plane.o
exynosdrm-y := exynos_drm_drv.o exynos_drm_crtc.o exynos_drm_fb.o \
exynos_drm_gem.o exynos_drm_core.o exynos_drm_plane.o
exynosdrm-$(CONFIG_DRM_FBDEV_EMULATION) += exynos_drm_fbdev.o
exynosdrm-$(CONFIG_DRM_EXYNOS_IOMMU) += exynos_drm_iommu.o
exynosdrm-$(CONFIG_DRM_EXYNOS_FIMD) += exynos_drm_fimd.o
exynosdrm-$(CONFIG_DRM_EXYNOS5433_DECON) += exynos5433_drm_decon.o
......
drivers/gpu/drm/exynos/exynos_drm_core.c
浏览文件 @ 65cbbd03
......@@ -101,7 +101,7 @@ int exynos_drm_subdrv_open(struct drm_device *dev, struct drm_file *file)
return 0;
err:
list_for_each_entry_reverse(subdrv, &subdrv->list, list) {
list_for_each_entry_continue_reverse(subdrv, &exynos_drm_subdrv_list, list) {
if (subdrv->close)
subdrv->close(dev, subdrv->dev, file);
}
......
drivers/gpu/drm/exynos/exynos_drm_fb.c
浏览文件 @ 65cbbd03
......@@ -199,17 +199,6 @@ dma_addr_t exynos_drm_fb_dma_addr(struct drm_framebuffer *fb, int index)
return exynos_fb->dma_addr[index];
}
static void exynos_drm_output_poll_changed(struct drm_device *dev)
{
struct exynos_drm_private *private = dev->dev_private;
struct drm_fb_helper *fb_helper = private->fb_helper;
if (fb_helper)
drm_fb_helper_hotplug_event(fb_helper);
else
exynos_drm_fbdev_init(dev);
}
static const struct drm_mode_config_funcs exynos_drm_mode_config_funcs = {
.fb_create = exynos_user_fb_create,
.output_poll_changed = exynos_drm_output_poll_changed,
......
drivers/gpu/drm/exynos/exynos_drm_fbdev.c
浏览文件 @ 65cbbd03
......@@ -317,3 +317,14 @@ void exynos_drm_fbdev_restore_mode(struct drm_device *dev)
drm_fb_helper_restore_fbdev_mode_unlocked(private->fb_helper);
}
void exynos_drm_output_poll_changed(struct drm_device *dev)
{
struct exynos_drm_private *private = dev->dev_private;
struct drm_fb_helper *fb_helper = private->fb_helper;
if (fb_helper)
drm_fb_helper_hotplug_event(fb_helper);
else
exynos_drm_fbdev_init(dev);
}
drivers/gpu/drm/exynos/exynos_drm_fbdev.h
浏览文件 @ 65cbbd03
......@@ -15,9 +15,30 @@
#ifndef _EXYNOS_DRM_FBDEV_H_
#define _EXYNOS_DRM_FBDEV_H_
#ifdef CONFIG_DRM_FBDEV_EMULATION
int exynos_drm_fbdev_init(struct drm_device *dev);
int exynos_drm_fbdev_reinit(struct drm_device *dev);
void exynos_drm_fbdev_fini(struct drm_device *dev);
void exynos_drm_fbdev_restore_mode(struct drm_device *dev);
void exynos_drm_output_poll_changed(struct drm_device *dev);
#else
static inline int exynos_drm_fbdev_init(struct drm_device *dev)
{
return 0;
}
static inline void exynos_drm_fbdev_fini(struct drm_device *dev)
{
}
static inline void exynos_drm_fbdev_restore_mode(struct drm_device *dev)
{
}
#define exynos_drm_output_poll_changed (NULL)
#endif
#endif
drivers/gpu/drm/exynos/exynos_drm_fimd.c
浏览文件 @ 65cbbd03
......@@ -888,7 +888,7 @@ static void fimd_dp_clock_enable(struct exynos_drm_crtc *crtc, bool enable)
* clock. On these SoCs the bootloader may enable it but any
* power domain off/on will reset it to disable state.
*/
if (ctx->driver_data != &exynos5_fimd_driver_data ||
if (ctx->driver_data != &exynos5_fimd_driver_data &&
ctx->driver_data != &exynos5420_fimd_driver_data)
return;
......
drivers/gpu/drm/exynos/exynos_drm_mic.c
浏览文件 @ 65cbbd03
......@@ -129,7 +129,7 @@ static void mic_set_path(struct exynos_mic *mic, bool enable)
} else
val &= ~(MIC0_RGB_MUX | MIC0_I80_MUX | MIC0_ON_MUX);
regmap_write(mic->sysreg, DSD_CFG_MUX, val);
ret = regmap_write(mic->sysreg, DSD_CFG_MUX, val);
if (ret)
DRM_ERROR("mic: Failed to read system register\n");
}
......@@ -457,6 +457,7 @@ static int exynos_mic_probe(struct platform_device *pdev)
"samsung,disp-syscon");
if (IS_ERR(mic->sysreg)) {
DRM_ERROR("mic: Failed to get system register.\n");
ret = PTR_ERR(mic->sysreg);
goto err;
}
......
drivers/gpu/drm/exynos/exynos_drm_plane.c
浏览文件 @ 65cbbd03
......@@ -11,9 +11,10 @@
#include <drm/drmP.h>
#include <drm/exynos_drm.h>
#include <drm/drm_plane_helper.h>
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_plane_helper.h>
#include <drm/exynos_drm.h>
#include "exynos_drm_drv.h"
#include "exynos_drm_crtc.h"
#include "exynos_drm_fb.h"
......@@ -57,11 +58,12 @@ static int exynos_plane_get_size(int start, unsigned length, unsigned last)
}
static void exynos_plane_mode_set(struct exynos_drm_plane_state *exynos_state)
{
struct drm_plane_state *state = &exynos_state->base;
struct drm_crtc *crtc = exynos_state->base.crtc;
struct drm_display_mode *mode = &crtc->state->adjusted_mode;
struct drm_crtc *crtc = state->crtc;
struct drm_crtc_state *crtc_state =
drm_atomic_get_existing_crtc_state(state->state, crtc);
struct drm_display_mode *mode = &crtc_state->adjusted_mode;
int crtc_x, crtc_y;
unsigned int crtc_w, crtc_h;
unsigned int src_x, src_y;
......
drivers/gpu/drm/i915/i915_drv.c
浏览文件 @ 65cbbd03
......@@ -758,10 +758,10 @@ static int i915_drm_resume(struct drm_device *dev)
dev_priv->display.hpd_irq_setup(dev);
spin_unlock_irq(&dev_priv->irq_lock);
intel_display_resume(dev);
intel_dp_mst_resume(dev);
intel_display_resume(dev);
/*
* ... but also need to make sure that hotplug processing
* doesn't cause havoc. Like in the driver load code we don't
......
drivers/gpu/drm/i915/i915_irq.c
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/gpu/drm/i915/intel_dp_mst.c
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/gpu/drm/i915/intel_lvds.c
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/gpu/drm/qxl/qxl_display.c
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/gpu/drm/qxl/qxl_drv.h
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/gpu/drm/radeon/ni_reg.h
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/hid/hid-core.c
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/hid/hid-ids.h
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/hid/hid-lenovo.c
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/hid/hid-microsoft.c
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/hid/hid-multitouch.c
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/hid/hid-wiimote-modules.c
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/hid/usbhid/hid-core.c
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/hid/wacom_sys.c
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/hid/wacom_wac.c
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/hid/wacom_wac.h
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/lguest/lg.h
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/lguest/x86/core.c
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/mailbox/mailbox-test.c
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/mailbox/mailbox.c
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/md/dm-cache-metadata.c
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/md/dm.c
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/misc/lkdtm.c
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/mmc/card/block.c
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/mmc/host/sdhci-tegra.c
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/mtd/nand/nand_base.c
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/nvdimm/pmem.c
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/nvme/host/pci.c
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/pci/pci-sysfs.c
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/pwm/pwm-fsl-ftm.c
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/usb/class/cdc-acm.c
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/usb/core/hcd-pci.c
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/usb/host/xhci-mem.c
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/usb/host/xhci-pci.c
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/usb/host/xhci-plat.c
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/usb/host/xhci-plat.h
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/usb/host/xhci-ring.c
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/usb/host/xhci.c
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/usb/host/xhci.h
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/usb/storage/uas.c
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/usb/storage/unusual_uas.h
浏览文件 @ 65cbbd03
此差异已折叠。
drivers/usb/storage/usb.c
浏览文件 @ 65cbbd03
此差异已折叠。
fs/crypto/crypto.c
浏览文件 @ 65cbbd03
此差异已折叠。
fs/debugfs/inode.c
浏览文件 @ 65cbbd03
此差异已折叠。
fs/ext4/crypto.c
浏览文件 @ 65cbbd03
此差异已折叠。
fs/f2fs/data.c
浏览文件 @ 65cbbd03
此差异已折叠。
fs/f2fs/file.c
浏览文件 @ 65cbbd03
此差异已折叠。
fs/seq_file.c
浏览文件 @ 65cbbd03
此差异已折叠。
include/linux/fscrypto.h
浏览文件 @ 65cbbd03
此差异已折叠。
include/linux/mm.h
浏览文件 @ 65cbbd03
此差异已折叠。
include/linux/pmem.h
浏览文件 @ 65cbbd03
此差异已折叠。
include/linux/seq_file.h
浏览文件 @ 65cbbd03
此差异已折叠。
include/linux/usb_usual.h
浏览文件 @ 65cbbd03
此差异已折叠。
kernel/events/core.c
浏览文件 @ 65cbbd03
此差异已折叠。
kernel/locking/lockdep.c
浏览文件 @ 65cbbd03
此差异已折叠。
kernel/resource.c
浏览文件 @ 65cbbd03
此差异已折叠。
lib/assoc_array.c
浏览文件 @ 65cbbd03
此差异已折叠。
lib/lz4/lz4defs.h
浏览文件 @ 65cbbd03
此差异已折叠。
mm/backing-dev.c
浏览文件 @ 65cbbd03
此差异已折叠。
mm/gup.c
浏览文件 @ 65cbbd03
此差异已折叠。
mm/nommu.c
浏览文件 @ 65cbbd03
此差异已折叠。
net/sunrpc/auth_gss/gss_krb5_mech.c
浏览文件 @ 65cbbd03
此差异已折叠。
scripts/asn1_compiler.c
浏览文件 @ 65cbbd03
此差异已折叠。
sound/hda/hdac_i915.c
浏览文件 @ 65cbbd03
此差异已折叠。
sound/isa/sscape.c
浏览文件 @ 65cbbd03
此差异已折叠。
sound/pci/hda/patch_hdmi.c
浏览文件 @ 65cbbd03
此差异已折叠。
sound/pci/hda/patch_realtek.c
浏览文件 @ 65cbbd03
此差异已折叠。
sound/usb/mixer_maps.c
浏览文件 @ 65cbbd03
此差异已折叠。
sound/usb/quirks.c
浏览文件 @ 65cbbd03
此差异已折叠。
tools/perf/util/intel-pt.c
浏览文件 @ 65cbbd03
此差异已折叠。
virt/kvm/arm/arch_timer.c
浏览文件 @ 65cbbd03
此差异已折叠。
virt/kvm/arm/pmu.c
浏览文件 @ 65cbbd03
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或