提交 65af8dea 编写于 作者: W Wey-Yi Guy

iwlagn: code clean up to remove duplicate code

Multiple devices use almost the same .cfg with minor differences.
Use macro and remove the duplication. By doing this, reduce
the chance for mistake while modify .cfg parameters
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
上级 f21dd005
......@@ -276,60 +276,49 @@ static struct iwl_ht_params iwl1000_ht_params = {
.use_rts_for_aggregation = true, /* use rts/cts protection */
};
#define IWL_DEVICE_1000 \
.fw_name_pre = IWL1000_FW_PRE, \
.ucode_api_max = IWL1000_UCODE_API_MAX, \
.ucode_api_min = IWL1000_UCODE_API_MIN, \
.eeprom_ver = EEPROM_1000_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION, \
.ops = &iwl1000_ops, \
.mod_params = &iwlagn_mod_params, \
.base_params = &iwl1000_base_params, \
.led_mode = IWL_LED_BLINK
struct iwl_cfg iwl1000_bgn_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N 1000 BGN",
.fw_name_pre = IWL1000_FW_PRE,
.ucode_api_max = IWL1000_UCODE_API_MAX,
.ucode_api_min = IWL1000_UCODE_API_MIN,
.eeprom_ver = EEPROM_1000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,
.ops = &iwl1000_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl1000_base_params,
IWL_DEVICE_1000,
.ht_params = &iwl1000_ht_params,
.led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl1000_bg_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N 1000 BG",
.fw_name_pre = IWL1000_FW_PRE,
.ucode_api_max = IWL1000_UCODE_API_MAX,
.ucode_api_min = IWL1000_UCODE_API_MIN,
.eeprom_ver = EEPROM_1000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,
.ops = &iwl1000_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl1000_base_params,
.led_mode = IWL_LED_BLINK,
IWL_DEVICE_1000,
};
#define IWL_DEVICE_100 \
.fw_name_pre = IWL100_FW_PRE, \
.ucode_api_max = IWL100_UCODE_API_MAX, \
.ucode_api_min = IWL100_UCODE_API_MIN, \
.eeprom_ver = EEPROM_1000_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION, \
.ops = &iwl1000_ops, \
.mod_params = &iwlagn_mod_params, \
.base_params = &iwl1000_base_params, \
.led_mode = IWL_LED_RF_STATE, \
.rx_with_siso_diversity = true
struct iwl_cfg iwl100_bgn_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N 100 BGN",
.fw_name_pre = IWL100_FW_PRE,
.ucode_api_max = IWL100_UCODE_API_MAX,
.ucode_api_min = IWL100_UCODE_API_MIN,
.eeprom_ver = EEPROM_1000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,
.ops = &iwl1000_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl1000_base_params,
IWL_DEVICE_100,
.ht_params = &iwl1000_ht_params,
.led_mode = IWL_LED_RF_STATE,
.rx_with_siso_diversity = true,
};
struct iwl_cfg iwl100_bg_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N 100 BG",
.fw_name_pre = IWL100_FW_PRE,
.ucode_api_max = IWL100_UCODE_API_MAX,
.ucode_api_min = IWL100_UCODE_API_MIN,
.eeprom_ver = EEPROM_1000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,
.ops = &iwl1000_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl1000_base_params,
.led_mode = IWL_LED_RF_STATE,
.rx_with_siso_diversity = true,
IWL_DEVICE_100,
};
MODULE_FIRMWARE(IWL1000_MODULE_FIRMWARE(IWL1000_UCODE_API_MAX));
......
......@@ -520,65 +520,44 @@ static struct iwl_ht_params iwl5000_ht_params = {
.use_rts_for_aggregation = true, /* use rts/cts protection */
};
#define IWL_DEVICE_5000 \
.fw_name_pre = IWL5000_FW_PRE, \
.ucode_api_max = IWL5000_UCODE_API_MAX, \
.ucode_api_min = IWL5000_UCODE_API_MIN, \
.eeprom_ver = EEPROM_5000_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION, \
.ops = &iwl5000_ops, \
.mod_params = &iwlagn_mod_params, \
.base_params = &iwl5000_base_params, \
.led_mode = IWL_LED_BLINK
struct iwl_cfg iwl5300_agn_cfg = {
.name = "Intel(R) Ultimate N WiFi Link 5300 AGN",
.fw_name_pre = IWL5000_FW_PRE,
.ucode_api_max = IWL5000_UCODE_API_MAX,
.ucode_api_min = IWL5000_UCODE_API_MIN,
.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.ops = &iwl5000_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl5000_base_params,
IWL_DEVICE_5000,
.ht_params = &iwl5000_ht_params,
.led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl5100_bgn_cfg = {
.name = "Intel(R) WiFi Link 5100 BGN",
.fw_name_pre = IWL5000_FW_PRE,
.ucode_api_max = IWL5000_UCODE_API_MAX,
.ucode_api_min = IWL5000_UCODE_API_MIN,
IWL_DEVICE_5000,
.valid_tx_ant = ANT_B, /* .cfg overwrite */
.valid_rx_ant = ANT_AB, /* .cfg overwrite */
.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.ops = &iwl5000_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl5000_base_params,
.ht_params = &iwl5000_ht_params,
.led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl5100_abg_cfg = {
.name = "Intel(R) WiFi Link 5100 ABG",
.fw_name_pre = IWL5000_FW_PRE,
.ucode_api_max = IWL5000_UCODE_API_MAX,
.ucode_api_min = IWL5000_UCODE_API_MIN,
IWL_DEVICE_5000,
.valid_tx_ant = ANT_B, /* .cfg overwrite */
.valid_rx_ant = ANT_AB, /* .cfg overwrite */
.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.ops = &iwl5000_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl5000_base_params,
.led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl5100_agn_cfg = {
.name = "Intel(R) WiFi Link 5100 AGN",
.fw_name_pre = IWL5000_FW_PRE,
.ucode_api_max = IWL5000_UCODE_API_MAX,
.ucode_api_min = IWL5000_UCODE_API_MIN,
IWL_DEVICE_5000,
.valid_tx_ant = ANT_B, /* .cfg overwrite */
.valid_rx_ant = ANT_AB, /* .cfg overwrite */
.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.ops = &iwl5000_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl5000_base_params,
.ht_params = &iwl5000_ht_params,
.led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl5350_agn_cfg = {
......@@ -596,35 +575,29 @@ struct iwl_cfg iwl5350_agn_cfg = {
.internal_wimax_coex = true,
};
#define IWL_DEVICE_5150 \
.fw_name_pre = IWL5150_FW_PRE, \
.ucode_api_max = IWL5150_UCODE_API_MAX, \
.ucode_api_min = IWL5150_UCODE_API_MIN, \
.eeprom_ver = EEPROM_5050_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION, \
.ops = &iwl5150_ops, \
.mod_params = &iwlagn_mod_params, \
.base_params = &iwl5000_base_params, \
.need_dc_calib = true, \
.led_mode = IWL_LED_BLINK, \
.internal_wimax_coex = true
struct iwl_cfg iwl5150_agn_cfg = {
.name = "Intel(R) WiMAX/WiFi Link 5150 AGN",
.fw_name_pre = IWL5150_FW_PRE,
.ucode_api_max = IWL5150_UCODE_API_MAX,
.ucode_api_min = IWL5150_UCODE_API_MIN,
.eeprom_ver = EEPROM_5050_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION,
.ops = &iwl5150_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl5000_base_params,
IWL_DEVICE_5150,
.ht_params = &iwl5000_ht_params,
.need_dc_calib = true,
.led_mode = IWL_LED_BLINK,
.internal_wimax_coex = true,
};
struct iwl_cfg iwl5150_abg_cfg = {
.name = "Intel(R) WiMAX/WiFi Link 5150 ABG",
.fw_name_pre = IWL5150_FW_PRE,
.ucode_api_max = IWL5150_UCODE_API_MAX,
.ucode_api_min = IWL5150_UCODE_API_MIN,
.eeprom_ver = EEPROM_5050_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION,
.ops = &iwl5150_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl5000_base_params,
.need_dc_calib = true,
.led_mode = IWL_LED_BLINK,
.internal_wimax_coex = true,
IWL_DEVICE_5150,
};
MODULE_FIRMWARE(IWL5000_MODULE_FIRMWARE(IWL5000_UCODE_API_MAX));
......
......@@ -554,235 +554,156 @@ static struct iwl_bt_params iwl6000_bt_params = {
.bt_sco_disable = true,
};
#define IWL_DEVICE_6005 \
.fw_name_pre = IWL6000G2A_FW_PRE, \
.ucode_api_max = IWL6000G2_UCODE_API_MAX, \
.ucode_api_min = IWL6000G2_UCODE_API_MIN, \
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, \
.ops = &iwl6000_ops, \
.mod_params = &iwlagn_mod_params, \
.base_params = &iwl6000_g2_base_params, \
.need_dc_calib = true, \
.need_temp_offset_calib = true, \
.led_mode = IWL_LED_RF_STATE
struct iwl_cfg iwl6005_2agn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6205 AGN",
.fw_name_pre = IWL6000G2A_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.ops = &iwl6000_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6000_g2_base_params,
IWL_DEVICE_6005,
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
.need_temp_offset_calib = true,
.led_mode = IWL_LED_RF_STATE,
};
struct iwl_cfg iwl6005_2abg_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6205 ABG",
.fw_name_pre = IWL6000G2A_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.ops = &iwl6000_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6000_g2_base_params,
.need_dc_calib = true,
.need_temp_offset_calib = true,
.led_mode = IWL_LED_RF_STATE,
IWL_DEVICE_6005,
};
struct iwl_cfg iwl6005_2bg_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6205 BG",
.fw_name_pre = IWL6000G2A_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.ops = &iwl6000_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6000_g2_base_params,
.need_dc_calib = true,
.need_temp_offset_calib = true,
.led_mode = IWL_LED_RF_STATE,
};
IWL_DEVICE_6005,
};
#define IWL_DEVICE_6030 \
.fw_name_pre = IWL6000G2B_FW_PRE, \
.ucode_api_max = IWL6000G2_UCODE_API_MAX, \
.ucode_api_min = IWL6000G2_UCODE_API_MIN, \
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, \
.ops = &iwl6000g2b_ops, \
.mod_params = &iwlagn_mod_params, \
.base_params = &iwl6000_g2_base_params, \
.bt_params = &iwl6000_bt_params, \
.need_dc_calib = true, \
.need_temp_offset_calib = true, \
.led_mode = IWL_LED_RF_STATE, \
.adv_pm = true, \
/* \
*Due to bluetooth, we transmit 2.4 GHz probes \
* only on antenna A \
*/ \
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A
struct iwl_cfg iwl6030_2agn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6230 AGN",
.fw_name_pre = IWL6000G2B_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.ops = &iwl6000g2b_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6000_g2_base_params,
.bt_params = &iwl6000_bt_params,
IWL_DEVICE_6030,
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
.need_temp_offset_calib = true,
.led_mode = IWL_LED_RF_STATE,
.adv_pm = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
};
struct iwl_cfg iwl6030_2abg_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6230 ABG",
.fw_name_pre = IWL6000G2B_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.ops = &iwl6000g2b_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6000_g2_base_params,
.bt_params = &iwl6000_bt_params,
.need_dc_calib = true,
.need_temp_offset_calib = true,
.led_mode = IWL_LED_RF_STATE,
.adv_pm = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
IWL_DEVICE_6030,
};
struct iwl_cfg iwl6030_2bgn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6230 BGN",
.fw_name_pre = IWL6000G2B_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.ops = &iwl6000g2b_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6000_g2_base_params,
.bt_params = &iwl6000_bt_params,
IWL_DEVICE_6030,
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
.need_temp_offset_calib = true,
.led_mode = IWL_LED_RF_STATE,
.adv_pm = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
};
struct iwl_cfg iwl6030_2bg_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6230 BG",
.fw_name_pre = IWL6000G2B_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.ops = &iwl6000g2b_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6000_g2_base_params,
.bt_params = &iwl6000_bt_params,
.need_dc_calib = true,
.need_temp_offset_calib = true,
.led_mode = IWL_LED_RF_STATE,
.adv_pm = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
IWL_DEVICE_6030,
};
struct iwl_cfg iwl1030_bgn_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N 1030 BGN",
.fw_name_pre = IWL6000G2B_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.ops = &iwl6000g2b_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6000_g2_base_params,
.bt_params = &iwl6000_bt_params,
IWL_DEVICE_6030,
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
.need_temp_offset_calib = true,
.led_mode = IWL_LED_RF_STATE,
.adv_pm = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
};
struct iwl_cfg iwl1030_bg_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N 1030 BG",
.fw_name_pre = IWL6000G2B_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.ops = &iwl6000g2b_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6000_g2_base_params,
.bt_params = &iwl6000_bt_params,
.need_dc_calib = true,
.need_temp_offset_calib = true,
.led_mode = IWL_LED_RF_STATE,
.adv_pm = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
IWL_DEVICE_6030,
};
struct iwl_cfg iwl130_bgn_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N 130 BGN",
IWL_DEVICE_6030,
.ht_params = &iwl6000_ht_params,
.rx_with_siso_diversity = true,
};
struct iwl_cfg iwl130_bg_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N 130 BG",
IWL_DEVICE_6030,
.rx_with_siso_diversity = true,
};
/*
* "i": Internal configuration, use internal Power Amplifier
*/
#define IWL_DEVICE_6000i \
.fw_name_pre = IWL6000_FW_PRE, \
.ucode_api_max = IWL6000_UCODE_API_MAX, \
.ucode_api_min = IWL6000_UCODE_API_MIN, \
.valid_tx_ant = ANT_BC, /* .cfg overwrite */ \
.valid_rx_ant = ANT_BC, /* .cfg overwrite */ \
.eeprom_ver = EEPROM_6000_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION, \
.ops = &iwl6000_ops, \
.mod_params = &iwlagn_mod_params, \
.base_params = &iwl6000_base_params, \
.pa_type = IWL_PA_INTERNAL, \
.led_mode = IWL_LED_BLINK
struct iwl_cfg iwl6000i_2agn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6200 AGN",
.fw_name_pre = IWL6000_FW_PRE,
.ucode_api_max = IWL6000_UCODE_API_MAX,
.ucode_api_min = IWL6000_UCODE_API_MIN,
.valid_tx_ant = ANT_BC, /* .cfg overwrite */
.valid_rx_ant = ANT_BC, /* .cfg overwrite */
.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
.ops = &iwl6000_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6000_base_params,
IWL_DEVICE_6000i,
.ht_params = &iwl6000_ht_params,
.pa_type = IWL_PA_INTERNAL,
.led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl6000i_2abg_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6200 ABG",
.fw_name_pre = IWL6000_FW_PRE,
.ucode_api_max = IWL6000_UCODE_API_MAX,
.ucode_api_min = IWL6000_UCODE_API_MIN,
.valid_tx_ant = ANT_BC, /* .cfg overwrite */
.valid_rx_ant = ANT_BC, /* .cfg overwrite */
.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
.ops = &iwl6000_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6000_base_params,
.pa_type = IWL_PA_INTERNAL,
.led_mode = IWL_LED_BLINK,
IWL_DEVICE_6000i,
};
struct iwl_cfg iwl6000i_2bg_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6200 BG",
.fw_name_pre = IWL6000_FW_PRE,
.ucode_api_max = IWL6000_UCODE_API_MAX,
.ucode_api_min = IWL6000_UCODE_API_MIN,
.valid_tx_ant = ANT_BC, /* .cfg overwrite */
.valid_rx_ant = ANT_BC, /* .cfg overwrite */
.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
.ops = &iwl6000_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6000_base_params,
.pa_type = IWL_PA_INTERNAL,
.led_mode = IWL_LED_BLINK,
};
IWL_DEVICE_6000i,
};
#define IWL_DEVICE_6050 \
.fw_name_pre = IWL6050_FW_PRE, \
.ucode_api_max = IWL6050_UCODE_API_MAX, \
.ucode_api_min = IWL6050_UCODE_API_MIN, \
.ops = &iwl6050_ops, \
.eeprom_ver = EEPROM_6050_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION, \
.mod_params = &iwlagn_mod_params, \
.base_params = &iwl6050_base_params, \
.need_dc_calib = true, \
.led_mode = IWL_LED_BLINK, \
.internal_wimax_coex = true
struct iwl_cfg iwl6050_2agn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 AGN",
.fw_name_pre = IWL6050_FW_PRE,
.ucode_api_max = IWL6050_UCODE_API_MAX,
.ucode_api_min = IWL6050_UCODE_API_MIN,
.ops = &iwl6050_ops,
.eeprom_ver = EEPROM_6050_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6050_base_params,
IWL_DEVICE_6050,
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
.led_mode = IWL_LED_BLINK,
.internal_wimax_coex = true,
};
struct iwl_cfg iwl6050_2abg_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 ABG",
IWL_DEVICE_6050,
};
struct iwl_cfg iwl6150_bgn_cfg = {
......@@ -801,21 +722,6 @@ struct iwl_cfg iwl6150_bgn_cfg = {
.internal_wimax_coex = true,
};
struct iwl_cfg iwl6050_2abg_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 ABG",
.fw_name_pre = IWL6050_FW_PRE,
.ucode_api_max = IWL6050_UCODE_API_MAX,
.ucode_api_min = IWL6050_UCODE_API_MIN,
.eeprom_ver = EEPROM_6050_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION,
.ops = &iwl6050_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6050_base_params,
.need_dc_calib = true,
.led_mode = IWL_LED_BLINK,
.internal_wimax_coex = true,
};
struct iwl_cfg iwl6000_3agn_cfg = {
.name = "Intel(R) Centrino(R) Ultimate-N 6300 AGN",
.fw_name_pre = IWL6000_FW_PRE,
......@@ -831,45 +737,6 @@ struct iwl_cfg iwl6000_3agn_cfg = {
.led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl130_bgn_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N 130 BGN",
.fw_name_pre = IWL6000G2B_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.ops = &iwl6000g2b_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6000_g2_base_params,
.bt_params = &iwl6000_bt_params,
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
.led_mode = IWL_LED_RF_STATE,
.adv_pm = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
.rx_with_siso_diversity = true,
};
struct iwl_cfg iwl130_bg_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N 130 BG",
.fw_name_pre = IWL6000G2B_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.ops = &iwl6000g2b_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6000_g2_base_params,
.bt_params = &iwl6000_bt_params,
.need_dc_calib = true,
.led_mode = IWL_LED_RF_STATE,
.adv_pm = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
.rx_with_siso_diversity = true,
};
MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_MAX));
MODULE_FIRMWARE(IWL6000G2A_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX));
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册