staging: Remove the mt29f_spinand driver

A new SPI NAND subsystem has been added in drivers/mtd/nand/spi/ and
Micron's MT29F devices are now supported in
drivers/mtd/nand/spi/micron.c.

Remove the old driver.
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>

drivers/staging/Kconfig

@@ -78,8 +78,6 @@ source "drivers/staging/goldfish/Kconfig"
 
 source "drivers/staging/netlogic/Kconfig"
 
-source "drivers/staging/mt29f_spinand/Kconfig"
-
 source "drivers/staging/gs_fpgaboot/Kconfig"
 
 source "drivers/staging/unisys/Kconfig"

drivers/staging/Makefile

@@ -29,7 +29,6 @@ obj-$(CONFIG_STAGING_BOARD)	+= board/
 obj-$(CONFIG_LTE_GDM724X)	+= gdm724x/
 obj-$(CONFIG_FIREWIRE_SERIAL)	+= fwserial/
 obj-$(CONFIG_GOLDFISH)		+= goldfish/
-obj-$(CONFIG_MTD_SPINAND_MT29F)	+= mt29f_spinand/
 obj-$(CONFIG_GS_FPGABOOT)	+= gs_fpgaboot/
 obj-$(CONFIG_UNISYSSPAR)	+= unisys/
 obj-$(CONFIG_COMMON_CLK_XLNX_CLKWZRD)	+= clocking-wizard/

drivers/staging/mt29f_spinand/Kconfig

-config MTD_SPINAND_MT29F
-	tristate "SPINAND Device Support for Micron"
-	depends on MTD_NAND && SPI
-	help
-	  This enables support for accessing Micron SPI NAND flash
-	  devices.
-	  If you have Micron SPI NAND chip say yes.
-
-	  If unsure, say no here.
-
-config MTD_SPINAND_ONDIEECC
-	bool "Use SPINAND internal ECC"
-	depends on MTD_SPINAND_MT29F
-	help
-	  Internal ECC.
-	  Enables Hardware ECC support for Micron SPI NAND.

drivers/staging/mt29f_spinand/Makefile

-obj-$(CONFIG_MTD_SPINAND_MT29F) += mt29f_spinand.o

drivers/staging/mt29f_spinand/TODO

-TODO:
-	- Tested on XLP platform, needs to be tested on other platforms.
-	- Checkpatch.pl cleanups
-	- Sparce fixes.
-	- Clean up coding style to meet kernel standard.
-
-Please send patches
-To:
-Kamlakant Patel <kamlakant.patel@broadcom.com>
-Cc:
-Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-Mona Anonuevo <manonuevo@micron.com>
-linux-mtd@lists.infradead.org

drivers/staging/mt29f_spinand/mt29f_spinand.h

-/*-
- * Copyright 2013 Broadcom Corporation
- *
- * Copyright (c) 2009-2010 Micron Technology, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * Henry Pan <hspan@micron.com>
- *
- * based on nand.h
- */
-#ifndef __LINUX_MTD_SPI_NAND_H
-#define __LINUX_MTD_SPI_NAND_H
-
-#include <linux/wait.h>
-#include <linux/spinlock.h>
-#include <linux/mtd/mtd.h>
-
-/* cmd */
-#define CMD_READ			0x13
-#define CMD_READ_RDM			0x03
-#define CMD_PROG_PAGE_CLRCACHE		0x02
-#define CMD_PROG_PAGE			0x84
-#define CMD_PROG_PAGE_EXC		0x10
-#define CMD_ERASE_BLK			0xd8
-#define CMD_WR_ENABLE			0x06
-#define CMD_WR_DISABLE			0x04
-#define CMD_READ_ID			0x9f
-#define CMD_RESET			0xff
-#define CMD_READ_REG			0x0f
-#define CMD_WRITE_REG			0x1f
-
-/* feature/ status reg */
-#define REG_BLOCK_LOCK			0xa0
-#define REG_OTP				0xb0
-#define REG_STATUS			0xc0/* timing */
-
-/* status */
-#define STATUS_OIP_MASK			0x01
-#define STATUS_READY			0
-#define STATUS_BUSY			BIT(0)
-
-#define STATUS_E_FAIL_MASK		0x04
-#define STATUS_E_FAIL			BIT(2)
-
-#define STATUS_P_FAIL_MASK		0x08
-#define STATUS_P_FAIL			BIT(3)
-
-#define STATUS_ECC_MASK			0x30
-#define STATUS_ECC_1BIT_CORRECTED	BIT(4)
-#define STATUS_ECC_ERROR		BIT(5)
-#define STATUS_ECC_RESERVED		(BIT(5) | BIT(4))
-
-/*ECC enable defines*/
-#define OTP_ECC_MASK			0x10
-#define OTP_ECC_OFF			0
-#define OTP_ECC_ON			1
-
-#define ECC_DISABLED
-#define ECC_IN_NAND
-#define ECC_SOFT
-
-/* block lock */
-#define BL_ALL_LOCKED      0x38
-#define BL_1_2_LOCKED      0x30
-#define BL_1_4_LOCKED      0x28
-#define BL_1_8_LOCKED      0x20
-#define BL_1_16_LOCKED     0x18
-#define BL_1_32_LOCKED     0x10
-#define BL_1_64_LOCKED     0x08
-#define BL_ALL_UNLOCKED    0
-
-struct spinand_info {
-	struct spi_device *spi;
-	void *priv;
-};
-
-struct spinand_state {
-	u32	col;
-	u32	row;
-	int		buf_ptr;
-	u8		*buf;
-};
-
-struct spinand_cmd {
-	u8		cmd;
-	u32		n_addr;		/* Number of address */
-	u8		addr[3];	/* Reg Offset */
-	u32		n_dummy;	/* Dummy use */
-	u32		n_tx;		/* Number of tx bytes */
-	u8		*tx_buf;	/* Tx buf */
-	u32		n_rx;		/* Number of rx bytes */
-	u8		*rx_buf;	/* Rx buf */
-};
-
-int spinand_mtd(struct mtd_info *mtd);
-void spinand_mtd_release(struct mtd_info *mtd);
-
-#endif /* __LINUX_MTD_SPI_NAND_H */