提交 63f13483 编写于 作者: M Marc Zyngier

irqchip/gic-v3: Relax polling of GIC{R,D}_CTLR.RWP

Recent work on the KVM GIC emulation has revealed that the GICv3
driver is a bit RWP-happy, as it polls this bit for each and
every write MMIO access involving a single interrupt.

As it turns out, polling RWP is only required when:
- Disabling an SGI, PPI or SPI
- Disabling LPIs at the redistributor level
- Disabling groups
- Enabling ARE
- Dealing with DPG*

Simplify the driver by removing all the other instances of RWP
polling, and add the one that was missing when enabling the distributor
(as that's where we set ARE).
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220405183857.205960-4-maz@kernel.org
上级 a837ed36
......@@ -352,28 +352,27 @@ static int gic_peek_irq(struct irq_data *d, u32 offset)
static void gic_poke_irq(struct irq_data *d, u32 offset)
{
void (*rwp_wait)(void);
void __iomem *base;
u32 index, mask;
offset = convert_offset_index(d, offset, &index);
mask = 1 << (index % 32);
if (gic_irq_in_rdist(d)) {
if (gic_irq_in_rdist(d))
base = gic_data_rdist_sgi_base();
rwp_wait = gic_redist_wait_for_rwp;
} else {
else
base = gic_data.dist_base;
rwp_wait = gic_dist_wait_for_rwp;
}
writel_relaxed(mask, base + offset + (index / 32) * 4);
rwp_wait();
}
static void gic_mask_irq(struct irq_data *d)
{
gic_poke_irq(d, GICD_ICENABLER);
if (gic_irq_in_rdist(d))
gic_redist_wait_for_rwp();
else
gic_dist_wait_for_rwp();
}
static void gic_eoimode1_mask_irq(struct irq_data *d)
......@@ -420,7 +419,11 @@ static int gic_irq_set_irqchip_state(struct irq_data *d,
break;
case IRQCHIP_STATE_MASKED:
reg = val ? GICD_ICENABLER : GICD_ISENABLER;
if (val) {
gic_mask_irq(d);
return 0;
}
reg = GICD_ISENABLER;
break;
default:
......@@ -574,7 +577,6 @@ static int gic_set_type(struct irq_data *d, unsigned int type)
{
enum gic_intid_range range;
unsigned int irq = gic_irq(d);
void (*rwp_wait)(void);
void __iomem *base;
u32 offset, index;
int ret;
......@@ -590,17 +592,14 @@ static int gic_set_type(struct irq_data *d, unsigned int type)
type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING)
return -EINVAL;
if (gic_irq_in_rdist(d)) {
if (gic_irq_in_rdist(d))
base = gic_data_rdist_sgi_base();
rwp_wait = gic_redist_wait_for_rwp;
} else {
else
base = gic_data.dist_base;
rwp_wait = gic_dist_wait_for_rwp;
}
offset = convert_offset_index(d, GICD_ICFGR, &index);
ret = gic_configure_irq(index, type, base + offset, rwp_wait);
ret = gic_configure_irq(index, type, base + offset, NULL);
if (ret && (range == PPI_RANGE || range == EPPI_RANGE)) {
/* Misconfigured PPIs are usually not fatal */
pr_warn("GIC: PPI INTID%d is secure or misconfigured\n", irq);
......@@ -807,8 +806,8 @@ static void __init gic_dist_init(void)
for (i = 0; i < GIC_ESPI_NR; i += 4)
writel_relaxed(GICD_INT_DEF_PRI_X4, base + GICD_IPRIORITYRnE + i);
/* Now do the common stuff, and wait for the distributor to drain */
gic_dist_config(base, GIC_LINE_NR, gic_dist_wait_for_rwp);
/* Now do the common stuff */
gic_dist_config(base, GIC_LINE_NR, NULL);
val = GICD_CTLR_ARE_NS | GICD_CTLR_ENABLE_G1A | GICD_CTLR_ENABLE_G1;
if (gic_data.rdists.gicd_typer2 & GICD_TYPER2_nASSGIcap) {
......@@ -816,8 +815,9 @@ static void __init gic_dist_init(void)
val |= GICD_CTLR_nASSGIreq;
}
/* Enable distributor with ARE, Group1 */
/* Enable distributor with ARE, Group1, and wait for it to drain */
writel_relaxed(val, base + GICD_CTLR);
gic_dist_wait_for_rwp();
/*
* Set all global interrupts to the boot CPU only. ARE must be
......@@ -1298,8 +1298,6 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
*/
if (enabled)
gic_unmask_irq(d);
else
gic_dist_wait_for_rwp();
irq_data_update_effective_affinity(d, cpumask_of(cpu));
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册