qlcnic: Enhance channel configuration logs

o Add logs for various failure conditions during channel configuration.
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com>
Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/qlogic/qlcnic/qlcnic.h

@@ -1474,7 +1474,7 @@ void qlcnic_diag_free_res(struct net_device *netdev, int max_sds_rings);
 int qlcnic_diag_alloc_res(struct net_device *netdev, int test);
 netdev_tx_t qlcnic_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
 int qlcnic_set_max_rss(struct qlcnic_adapter *, u8, size_t);
-int qlcnic_validate_max_rss(u8, u8);
+int qlcnic_validate_max_rss(struct qlcnic_adapter *, __u32);
 void qlcnic_alloc_lb_filters_mem(struct qlcnic_adapter *adapter);
 int qlcnic_enable_msix(struct qlcnic_adapter *, u32);
 

drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c

@@ -635,7 +635,7 @@ static int qlcnic_set_channels(struct net_device *dev,
 	    channel->tx_count != channel->max_tx)
 		return -EINVAL;
 
-	err = qlcnic_validate_max_rss(channel->max_rx, channel->rx_count);
+	err = qlcnic_validate_max_rss(adapter, channel->rx_count);
 	if (err)
 		return err;
 

drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c

@@ -3273,20 +3273,40 @@ qlcnicvf_start_firmware(struct qlcnic_adapter *adapter)
 	return err;
 }
 
-int qlcnic_validate_max_rss(u8 max_hw, u8 val)
+int qlcnic_validate_max_rss(struct qlcnic_adapter *adapter,
+			    __u32 val)
 {
+	struct net_device *netdev = adapter->netdev;
+	u8 max_hw = adapter->ahw->max_rx_ques;
 	u32 max_allowed;
 
-	if (max_hw > QLC_MAX_SDS_RINGS) {
-		max_hw = QLC_MAX_SDS_RINGS;
-		pr_info("max rss reset to %d\n", QLC_MAX_SDS_RINGS);
+	if (val > QLC_MAX_SDS_RINGS) {
+		netdev_err(netdev, "RSS value should not be higher than %u\n",
+			   QLC_MAX_SDS_RINGS);
+		return -EINVAL;
 	}
 
 	max_allowed = rounddown_pow_of_two(min_t(int, max_hw,
 						 num_online_cpus()));
 	if ((val > max_allowed) || (val < 2) || !is_power_of_2(val)) {
-		pr_info("rss_ring valid range [2 - %x] in powers of 2\n",
-			max_allowed);
+		if (!is_power_of_2(val))
+			netdev_err(netdev, "RSS value should be a power of 2\n");
+
+		if (val < 2)
+			netdev_err(netdev, "RSS value should not be lower than 2\n");
+
+		if (val > max_hw)
+			netdev_err(netdev,
+				   "RSS value should not be higher than[%u], the max RSS rings supported by the adapter\n",
+				   max_hw);
+
+		if (val > num_online_cpus())
+			netdev_err(netdev,
+				   "RSS value should not be higher than[%u], number of online CPUs in the system\n",
+				   num_online_cpus());
+
+		netdev_err(netdev, "Unable to configure %u RSS rings\n", val);
+
 		return -EINVAL;
 	}
 	return 0;