Merge branch 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel

* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (23 commits)
  drm/i915: remove full registers dump debug
  drm/i915: Add DP dpll limit on ironlake and use existing DPLL search function
  drm/i915: Select the correct BPC for LVDS on Ironlake
  drm/i915: Make the BPC in FDI rx/transcoder be consistent with that in pipeconf on Ironlake
  drm/i915: Enable/disable the dithering for LVDS based on VBT setting
  drm/i915: Permit pinning whilst the device is 'suspended'
  drm/i915: Hold struct mutex whilst pinning power context bo.
  drm/i915: fix unused var
  drm/i915: Storage class should be before const qualifier
  drm/i915: remove render reclock support
  drm/i915: Fix RC6 suspend/resume
  drm/i915: execbuf2 support
  drm/i915: Reload hangcheck timer too for Ironlake
  drm/i915: only enable hotplug for detected outputs
  drm/i915: Track whether cursor needs physical address in intel_device_info
  drm/i915: Implement IS_* macros using static tables
  drm/i915: Move PCI IDs into i915 driver
  drm/i915: Update LVDS connector status when receiving ACPI LID event
  drm/i915: Add MALATA PC-81005 to ACPI LID quirk list
  drm/i915: implement new pm ops for i915
  ...

drivers/gpu/drm/i915/i915_debugfs.c

@@ -272,7 +272,7 @@ static void i915_dump_pages(struct seq_file *m, struct page **pages, int page_co
 		mem = kmap_atomic(pages[page], KM_USER0);
 		for (i = 0; i < PAGE_SIZE; i += 4)
 			seq_printf(m, "%08x :  %08x\n", i, mem[i / 4]);
-		kunmap_atomic(pages[page], KM_USER0);
+		kunmap_atomic(mem, KM_USER0);
 	}
 }
 
@@ -386,34 +386,6 @@ static int i915_error_state(struct seq_file *m, void *unused)
 	return 0;
 }
 
-static int i915_registers_info(struct seq_file *m, void *data) {
-	struct drm_info_node *node = (struct drm_info_node *) m->private;
-	struct drm_device *dev = node->minor->dev;
-	drm_i915_private_t *dev_priv = dev->dev_private;
-	uint32_t reg;
-
-#define DUMP_RANGE(start, end) \
-	for (reg=start; reg < end; reg += 4) \
-	seq_printf(m, "%08x\t%08x\n", reg, I915_READ(reg));
-
-	DUMP_RANGE(0x00000, 0x00fff);   /* VGA registers */
-	DUMP_RANGE(0x02000, 0x02fff);   /* instruction, memory, interrupt control registers */
-	DUMP_RANGE(0x03000, 0x031ff);   /* FENCE and PPGTT control registers */
-	DUMP_RANGE(0x03200, 0x03fff);   /* frame buffer compression registers */
-	DUMP_RANGE(0x05000, 0x05fff);   /* I/O control registers */
-	DUMP_RANGE(0x06000, 0x06fff);   /* clock control registers */
-	DUMP_RANGE(0x07000, 0x07fff);   /* 3D internal debug registers */
-	DUMP_RANGE(0x07400, 0x088ff);   /* GPE debug registers */
-	DUMP_RANGE(0x0a000, 0x0afff);   /* display palette registers */
-	DUMP_RANGE(0x10000, 0x13fff);   /* MMIO MCHBAR */
-	DUMP_RANGE(0x30000, 0x3ffff);   /* overlay registers */
-	DUMP_RANGE(0x60000, 0x6ffff);   /* display engine pipeline registers */
-	DUMP_RANGE(0x70000, 0x72fff);   /* display and cursor registers */
-	DUMP_RANGE(0x73000, 0x73fff);   /* performance counters */
-
-	return 0;
-}
-
 static int
 i915_wedged_open(struct inode *inode,
 		 struct file *filp)
@@ -519,7 +491,6 @@ static int i915_wedged_create(struct dentry *root, struct drm_minor *minor)
 }
 
 static struct drm_info_list i915_debugfs_list[] = {
-	{"i915_regs", i915_registers_info, 0},
 	{"i915_gem_active", i915_gem_object_list_info, 0, (void *) ACTIVE_LIST},
 	{"i915_gem_flushing", i915_gem_object_list_info, 0, (void *) FLUSHING_LIST},
 	{"i915_gem_inactive", i915_gem_object_list_info, 0, (void *) INACTIVE_LIST},

drivers/gpu/drm/i915/i915_dma.c

@@ -813,9 +813,13 @@ static int i915_getparam(struct drm_device *dev, void *data,
 	case I915_PARAM_HAS_PAGEFLIPPING:
 		value = 1;
 		break;
+	case I915_PARAM_HAS_EXECBUF2:
+		/* depends on GEM */
+		value = dev_priv->has_gem;
+		break;
 	default:
 		DRM_DEBUG_DRIVER("Unknown parameter %d\n",
-					param->param);
+				 param->param);
 		return -EINVAL;
 	}
 
@@ -1117,7 +1121,8 @@ static void i915_setup_compression(struct drm_device *dev, int size)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_mm_node *compressed_fb, *compressed_llb;
-	unsigned long cfb_base, ll_base;
+	unsigned long cfb_base;
+	unsigned long ll_base = 0;
 
 	/* Leave 1M for line length buffer & misc. */
 	compressed_fb = drm_mm_search_free(&dev_priv->vram, size, 4096, 0);
@@ -1200,14 +1205,6 @@ static int i915_load_modeset_init(struct drm_device *dev,
 	dev->mode_config.fb_base = drm_get_resource_start(dev, fb_bar) &
 		0xff000000;
 
-	if (IS_MOBILE(dev) || IS_I9XX(dev))
-		dev_priv->cursor_needs_physical = true;
-	else
-		dev_priv->cursor_needs_physical = false;
-
-	if (IS_I965G(dev) || IS_G33(dev))
-		dev_priv->cursor_needs_physical = false;
-
 	/* Basic memrange allocator for stolen space (aka vram) */
 	drm_mm_init(&dev_priv->vram, 0, prealloc_size);
 	DRM_INFO("set up %ldM of stolen space\n", prealloc_size / (1024*1024));
@@ -1257,6 +1254,8 @@ static int i915_load_modeset_init(struct drm_device *dev,
 	if (ret)
 		goto destroy_ringbuffer;
 
+	intel_modeset_init(dev);
+
 	ret = drm_irq_install(dev);
 	if (ret)
 		goto destroy_ringbuffer;
@@ -1271,8 +1270,6 @@ static int i915_load_modeset_init(struct drm_device *dev,
 
 	I915_WRITE(INSTPM, (1 << 5) | (1 << 21));
 
-	intel_modeset_init(dev);
-
 	drm_helper_initial_config(dev);
 
 	return 0;
@@ -1360,7 +1357,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	resource_size_t base, size;
-	int ret = 0, mmio_bar = IS_I9XX(dev) ? 0 : 1;
+	int ret = 0, mmio_bar;
 	uint32_t agp_size, prealloc_size, prealloc_start;
 
 	/* i915 has 4 more counters */
@@ -1376,8 +1373,10 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 
 	dev->dev_private = (void *)dev_priv;
 	dev_priv->dev = dev;
+	dev_priv->info = (struct intel_device_info *) flags;
 
 	/* Add register map (needed for suspend/resume) */
+	mmio_bar = IS_I9XX(dev) ? 0 : 1;
 	base = drm_get_resource_start(dev, mmio_bar);
 	size = drm_get_resource_len(dev, mmio_bar);
 
@@ -1652,6 +1651,7 @@ struct drm_ioctl_desc i915_ioctls[] = {
 	DRM_IOCTL_DEF(DRM_I915_HWS_ADDR, i915_set_status_page, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
 	DRM_IOCTL_DEF(DRM_I915_GEM_INIT, i915_gem_init_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
 	DRM_IOCTL_DEF(DRM_I915_GEM_EXECBUFFER, i915_gem_execbuffer, DRM_AUTH),
+	DRM_IOCTL_DEF(DRM_I915_GEM_EXECBUFFER2, i915_gem_execbuffer2, DRM_AUTH),
 	DRM_IOCTL_DEF(DRM_I915_GEM_PIN, i915_gem_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY),
 	DRM_IOCTL_DEF(DRM_I915_GEM_UNPIN, i915_gem_unpin_ioctl, DRM_AUTH|DRM_ROOT_ONLY),
 	DRM_IOCTL_DEF(DRM_I915_GEM_BUSY, i915_gem_busy_ioctl, DRM_AUTH),

drivers/gpu/drm/i915/i915_drv.c

@@ -33,7 +33,6 @@
 #include "i915_drm.h"
 #include "i915_drv.h"
 
-#include "drm_pciids.h"
 #include <linux/console.h>
 #include "drm_crtc_helper.h"
 
@@ -48,8 +47,124 @@ module_param_named(powersave, i915_powersave, int, 0400);
 
 static struct drm_driver driver;
 
-static struct pci_device_id pciidlist[] = {
-	i915_PCI_IDS
+#define INTEL_VGA_DEVICE(id, info) {		\
+	.class = PCI_CLASS_DISPLAY_VGA << 8,	\
+	.class_mask = 0xffff00,			\
+	.vendor = 0x8086,			\
+	.device = id,				\
+	.subvendor = PCI_ANY_ID,		\
+	.subdevice = PCI_ANY_ID,		\
+	.driver_data = (unsigned long) info }
+
+const static struct intel_device_info intel_i830_info = {
+	.is_i8xx = 1, .is_mobile = 1, .cursor_needs_physical = 1,
+};
+
+const static struct intel_device_info intel_845g_info = {
+	.is_i8xx = 1,
+};
+
+const static struct intel_device_info intel_i85x_info = {
+	.is_i8xx = 1, .is_mobile = 1, .cursor_needs_physical = 1,
+};
+
+const static struct intel_device_info intel_i865g_info = {
+	.is_i8xx = 1,
+};
+
+const static struct intel_device_info intel_i915g_info = {
+	.is_i915g = 1, .is_i9xx = 1, .cursor_needs_physical = 1,
+};
+const static struct intel_device_info intel_i915gm_info = {
+	.is_i9xx = 1,  .is_mobile = 1, .has_fbc = 1,
+	.cursor_needs_physical = 1,
+};
+const static struct intel_device_info intel_i945g_info = {
+	.is_i9xx = 1, .has_hotplug = 1, .cursor_needs_physical = 1,
+};
+const static struct intel_device_info intel_i945gm_info = {
+	.is_i945gm = 1, .is_i9xx = 1, .is_mobile = 1, .has_fbc = 1,
+	.has_hotplug = 1, .cursor_needs_physical = 1,
+};
+
+const static struct intel_device_info intel_i965g_info = {
+	.is_i965g = 1, .is_i9xx = 1, .has_hotplug = 1,
+};
+
+const static struct intel_device_info intel_i965gm_info = {
+	.is_i965g = 1, .is_mobile = 1, .is_i965gm = 1, .is_i9xx = 1,
+	.is_mobile = 1, .has_fbc = 1, .has_rc6 = 1,
+	.has_hotplug = 1,
+};
+
+const static struct intel_device_info intel_g33_info = {
+	.is_g33 = 1, .is_i9xx = 1, .need_gfx_hws = 1,
+	.has_hotplug = 1,
+};
+
+const static struct intel_device_info intel_g45_info = {
+	.is_i965g = 1, .is_g4x = 1, .is_i9xx = 1, .need_gfx_hws = 1,
+	.has_pipe_cxsr = 1,
+	.has_hotplug = 1,
+};
+
+const static struct intel_device_info intel_gm45_info = {
+	.is_i965g = 1, .is_mobile = 1, .is_g4x = 1, .is_i9xx = 1,
+	.is_mobile = 1, .need_gfx_hws = 1, .has_fbc = 1, .has_rc6 = 1,
+	.has_pipe_cxsr = 1,
+	.has_hotplug = 1,
+};
+
+const static struct intel_device_info intel_pineview_info = {
+	.is_g33 = 1, .is_pineview = 1, .is_mobile = 1, .is_i9xx = 1,
+	.has_pipe_cxsr = 1,
+	.has_hotplug = 1,
+};
+
+const static struct intel_device_info intel_ironlake_d_info = {
+	.is_ironlake = 1, .is_i965g = 1, .is_i9xx = 1, .need_gfx_hws = 1,
+	.has_pipe_cxsr = 1,
+	.has_hotplug = 1,
+};
+
+const static struct intel_device_info intel_ironlake_m_info = {
+	.is_ironlake = 1, .is_mobile = 1, .is_i965g = 1, .is_i9xx = 1,
+	.need_gfx_hws = 1, .has_rc6 = 1,
+	.has_hotplug = 1,
+};
+
+const static struct pci_device_id pciidlist[] = {
+	INTEL_VGA_DEVICE(0x3577, &intel_i830_info),
+	INTEL_VGA_DEVICE(0x2562, &intel_845g_info),
+	INTEL_VGA_DEVICE(0x3582, &intel_i85x_info),
+	INTEL_VGA_DEVICE(0x35e8, &intel_i85x_info),
+	INTEL_VGA_DEVICE(0x2572, &intel_i865g_info),
+	INTEL_VGA_DEVICE(0x2582, &intel_i915g_info),
+	INTEL_VGA_DEVICE(0x258a, &intel_i915g_info),
+	INTEL_VGA_DEVICE(0x2592, &intel_i915gm_info),
+	INTEL_VGA_DEVICE(0x2772, &intel_i945g_info),
+	INTEL_VGA_DEVICE(0x27a2, &intel_i945gm_info),
+	INTEL_VGA_DEVICE(0x27ae, &intel_i945gm_info),
+	INTEL_VGA_DEVICE(0x2972, &intel_i965g_info),
+	INTEL_VGA_DEVICE(0x2982, &intel_i965g_info),
+	INTEL_VGA_DEVICE(0x2992, &intel_i965g_info),
+	INTEL_VGA_DEVICE(0x29a2, &intel_i965g_info),
+	INTEL_VGA_DEVICE(0x29b2, &intel_g33_info),
+	INTEL_VGA_DEVICE(0x29c2, &intel_g33_info),
+	INTEL_VGA_DEVICE(0x29d2, &intel_g33_info),
+	INTEL_VGA_DEVICE(0x2a02, &intel_i965gm_info),
+	INTEL_VGA_DEVICE(0x2a12, &intel_i965gm_info),
+	INTEL_VGA_DEVICE(0x2a42, &intel_gm45_info),
+	INTEL_VGA_DEVICE(0x2e02, &intel_g45_info),
+	INTEL_VGA_DEVICE(0x2e12, &intel_g45_info),
+	INTEL_VGA_DEVICE(0x2e22, &intel_g45_info),
+	INTEL_VGA_DEVICE(0x2e32, &intel_g45_info),
+	INTEL_VGA_DEVICE(0x2e42, &intel_g45_info),
+	INTEL_VGA_DEVICE(0xa001, &intel_pineview_info),
+	INTEL_VGA_DEVICE(0xa011, &intel_pineview_info),
+	INTEL_VGA_DEVICE(0x0042, &intel_ironlake_d_info),
+	INTEL_VGA_DEVICE(0x0046, &intel_ironlake_m_info),
+	{0, 0, 0}
 };
 
 #if defined(CONFIG_DRM_I915_KMS)
@@ -284,6 +399,52 @@ i915_pci_resume(struct pci_dev *pdev)
 	return i915_resume(dev);
 }
 
+static int
+i915_pm_suspend(struct device *dev)
+{
+	return i915_pci_suspend(to_pci_dev(dev), PMSG_SUSPEND);
+}
+
+static int
+i915_pm_resume(struct device *dev)
+{
+	return i915_pci_resume(to_pci_dev(dev));
+}
+
+static int
+i915_pm_freeze(struct device *dev)
+{
+	return i915_pci_suspend(to_pci_dev(dev), PMSG_FREEZE);
+}
+
+static int
+i915_pm_thaw(struct device *dev)
+{
+	/* thaw during hibernate, do nothing! */
+	return 0;
+}
+
+static int
+i915_pm_poweroff(struct device *dev)
+{
+	return i915_pci_suspend(to_pci_dev(dev), PMSG_HIBERNATE);
+}
+
+static int
+i915_pm_restore(struct device *dev)
+{
+	return i915_pci_resume(to_pci_dev(dev));
+}
+
+const struct dev_pm_ops i915_pm_ops = {
+     .suspend = i915_pm_suspend,
+     .resume = i915_pm_resume,
+     .freeze = i915_pm_freeze,
+     .thaw = i915_pm_thaw,
+     .poweroff = i915_pm_poweroff,
+     .restore = i915_pm_restore,
+};
+
 static struct vm_operations_struct i915_gem_vm_ops = {
 	.fault = i915_gem_fault,
 	.open = drm_gem_vm_open,
@@ -303,8 +464,6 @@ static struct drm_driver driver = {
 	.lastclose = i915_driver_lastclose,
 	.preclose = i915_driver_preclose,
 	.postclose = i915_driver_postclose,
-	.suspend = i915_suspend,
-	.resume = i915_resume,
 	.device_is_agp = i915_driver_device_is_agp,
 	.enable_vblank = i915_enable_vblank,
 	.disable_vblank = i915_disable_vblank,
@@ -344,10 +503,7 @@ static struct drm_driver driver = {
 		 .id_table = pciidlist,
 		 .probe = i915_pci_probe,
 		 .remove = i915_pci_remove,
-#ifdef CONFIG_PM
-		 .resume = i915_pci_resume,
-		 .suspend = i915_pci_suspend,
-#endif
+		 .driver.pm = &i915_pm_ops,
 	},
 
 	.name = DRIVER_NAME,

drivers/gpu/drm/i915/i915_drv.h

@@ -172,9 +172,31 @@ struct drm_i915_display_funcs {
 
 struct intel_overlay;
 
+struct intel_device_info {
+	u8 is_mobile : 1;
+	u8 is_i8xx : 1;
+	u8 is_i915g : 1;
+	u8 is_i9xx : 1;
+	u8 is_i945gm : 1;
+	u8 is_i965g : 1;
+	u8 is_i965gm : 1;
+	u8 is_g33 : 1;
+	u8 need_gfx_hws : 1;
+	u8 is_g4x : 1;
+	u8 is_pineview : 1;
+	u8 is_ironlake : 1;
+	u8 has_fbc : 1;
+	u8 has_rc6 : 1;
+	u8 has_pipe_cxsr : 1;
+	u8 has_hotplug : 1;
+	u8 cursor_needs_physical : 1;
+};
+
 typedef struct drm_i915_private {
 	struct drm_device *dev;
 
+	const struct intel_device_info *info;
+
 	int has_gem;
 
 	void __iomem *regs;
@@ -232,8 +254,6 @@ typedef struct drm_i915_private {
 	int hangcheck_count;
 	uint32_t last_acthd;
 
-	bool cursor_needs_physical;
-
 	struct drm_mm vram;
 
 	unsigned long cfb_size;
@@ -287,8 +307,6 @@ typedef struct drm_i915_private {
 	u32 saveDSPACNTR;
 	u32 saveDSPBCNTR;
 	u32 saveDSPARB;
-	u32 saveRENDERSTANDBY;
-	u32 savePWRCTXA;
 	u32 saveHWS;
 	u32 savePIPEACONF;
 	u32 savePIPEBCONF;
@@ -561,6 +579,7 @@ typedef struct drm_i915_private {
 	u16 orig_clock;
 	int child_dev_num;
 	struct child_device_config *child_dev;
+	struct drm_connector *int_lvds_connector;
 } drm_i915_private_t;
 
 /** driver private structure attached to each drm_gem_object */
@@ -794,6 +813,8 @@ int i915_gem_sw_finish_ioctl(struct drm_device *dev, void *data,
 			     struct drm_file *file_priv);
 int i915_gem_execbuffer(struct drm_device *dev, void *data,
 			struct drm_file *file_priv);
+int i915_gem_execbuffer2(struct drm_device *dev, void *data,
+			 struct drm_file *file_priv);
 int i915_gem_pin_ioctl(struct drm_device *dev, void *data,
 		       struct drm_file *file_priv);
 int i915_gem_unpin_ioctl(struct drm_device *dev, void *data,
@@ -860,6 +881,9 @@ void i915_gem_shrinker_exit(void);
 void i915_gem_detect_bit_6_swizzle(struct drm_device *dev);
 void i915_gem_object_do_bit_17_swizzle(struct drm_gem_object *obj);
 void i915_gem_object_save_bit_17_swizzle(struct drm_gem_object *obj);
+bool i915_tiling_ok(struct drm_device *dev, int stride, int size,
+		    int tiling_mode);
+bool i915_obj_fenceable(struct drm_device *dev, struct drm_gem_object *obj);
 
 /* i915_gem_debug.c */
 void i915_gem_dump_object(struct drm_gem_object *obj, int len,
@@ -982,67 +1006,33 @@ extern void g4x_disable_fbc(struct drm_device *dev);
 extern int i915_wrap_ring(struct drm_device * dev);
 extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 
-#define IS_I830(dev) ((dev)->pci_device == 0x3577)
-#define IS_845G(dev) ((dev)->pci_device == 0x2562)
-#define IS_I85X(dev) ((dev)->pci_device == 0x3582)
-#define IS_I865G(dev) ((dev)->pci_device == 0x2572)
-#define IS_I8XX(dev) (IS_I830(dev) || IS_845G(dev) || IS_I85X(dev) || IS_I865G(dev))
-
-#define IS_I915G(dev) ((dev)->pci_device == 0x2582 || (dev)->pci_device == 0x258a)
-#define IS_I915GM(dev) ((dev)->pci_device == 0x2592)
-#define IS_I945G(dev) ((dev)->pci_device == 0x2772)
-#define IS_I945GM(dev) ((dev)->pci_device == 0x27A2 ||\
-		        (dev)->pci_device == 0x27AE)
-#define IS_I965G(dev) ((dev)->pci_device == 0x2972 || \
-		       (dev)->pci_device == 0x2982 || \
-		       (dev)->pci_device == 0x2992 || \
-		       (dev)->pci_device == 0x29A2 || \
-		       (dev)->pci_device == 0x2A02 || \
-		       (dev)->pci_device == 0x2A12 || \
-		       (dev)->pci_device == 0x2A42 || \
-		       (dev)->pci_device == 0x2E02 || \
-		       (dev)->pci_device == 0x2E12 || \
-		       (dev)->pci_device == 0x2E22 || \
-		       (dev)->pci_device == 0x2E32 || \
-		       (dev)->pci_device == 0x2E42 || \
-		       (dev)->pci_device == 0x0042 || \
-		       (dev)->pci_device == 0x0046)
-
-#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02 || \
-			(dev)->pci_device == 0x2A12)
-
-#define IS_GM45(dev) ((dev)->pci_device == 0x2A42)
-
-#define IS_G4X(dev) ((dev)->pci_device == 0x2E02 || \
-		     (dev)->pci_device == 0x2E12 || \
-		     (dev)->pci_device == 0x2E22 || \
-		     (dev)->pci_device == 0x2E32 || \
-		     (dev)->pci_device == 0x2E42 || \
-		     IS_GM45(dev))
-
-#define IS_PINEVIEW_G(dev) ((dev)->pci_device == 0xa001)
-#define IS_PINEVIEW_M(dev) ((dev)->pci_device == 0xa011)
-#define IS_PINEVIEW(dev) (IS_PINEVIEW_G(dev) || IS_PINEVIEW_M(dev))
-
-#define IS_G33(dev)    ((dev)->pci_device == 0x29C2 ||	\
-			(dev)->pci_device == 0x29B2 ||	\
-			(dev)->pci_device == 0x29D2 ||  \
-			(IS_PINEVIEW(dev)))
-
+#define INTEL_INFO(dev)	(((struct drm_i915_private *) (dev)->dev_private)->info)
+
+#define IS_I830(dev)		((dev)->pci_device == 0x3577)
+#define IS_845G(dev)		((dev)->pci_device == 0x2562)
+#define IS_I85X(dev)		((dev)->pci_device == 0x3582)
+#define IS_I865G(dev)		((dev)->pci_device == 0x2572)
+#define IS_I8XX(dev)		(INTEL_INFO(dev)->is_i8xx)
+#define IS_I915G(dev)		(INTEL_INFO(dev)->is_i915g)
+#define IS_I915GM(dev)		((dev)->pci_device == 0x2592)
+#define IS_I945G(dev)		((dev)->pci_device == 0x2772)
+#define IS_I945GM(dev)		(INTEL_INFO(dev)->is_i945gm)
+#define IS_I965G(dev)		(INTEL_INFO(dev)->is_i965g)
+#define IS_I965GM(dev)		(INTEL_INFO(dev)->is_i965gm)
+#define IS_GM45(dev)		((dev)->pci_device == 0x2A42)
+#define IS_G4X(dev)		(INTEL_INFO(dev)->is_g4x)
+#define IS_PINEVIEW_G(dev)	((dev)->pci_device == 0xa001)
+#define IS_PINEVIEW_M(dev)	((dev)->pci_device == 0xa011)
+#define IS_PINEVIEW(dev)	(INTEL_INFO(dev)->is_pineview)
+#define IS_G33(dev)		(INTEL_INFO(dev)->is_g33)
 #define IS_IRONLAKE_D(dev)	((dev)->pci_device == 0x0042)
 #define IS_IRONLAKE_M(dev)	((dev)->pci_device == 0x0046)
-#define IS_IRONLAKE(dev)	(IS_IRONLAKE_D(dev) || IS_IRONLAKE_M(dev))
-
-#define IS_I9XX(dev) (IS_I915G(dev) || IS_I915GM(dev) || IS_I945G(dev) || \
-		      IS_I945GM(dev) || IS_I965G(dev) || IS_G33(dev) || \
-		      IS_IRONLAKE(dev))
+#define IS_IRONLAKE(dev)	(INTEL_INFO(dev)->is_ironlake)
+#define IS_I9XX(dev)		(INTEL_INFO(dev)->is_i9xx)
+#define IS_MOBILE(dev)		(INTEL_INFO(dev)->is_mobile)
 
-#define IS_MOBILE(dev) (IS_I830(dev) || IS_I85X(dev) || IS_I915GM(dev) || \
-			IS_I945GM(dev) || IS_I965GM(dev) || IS_GM45(dev) || \
-			IS_PINEVIEW(dev) || IS_IRONLAKE_M(dev))
+#define I915_NEED_GFX_HWS(dev)	(INTEL_INFO(dev)->need_gfx_hws)
 
-#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_GM45(dev) || IS_G4X(dev) || \
-				IS_IRONLAKE(dev))
 /* With the 945 and later, Y tiling got adjusted so that it was 32 128-byte
  * rows, which changed the alignment requirements and fence programming.
  */
@@ -1054,17 +1044,14 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 #define SUPPORTS_EDP(dev)		(IS_IRONLAKE_M(dev))
 #define SUPPORTS_TV(dev)		(IS_I9XX(dev) && IS_MOBILE(dev) && \
 					!IS_IRONLAKE(dev) && !IS_PINEVIEW(dev))
-#define I915_HAS_HOTPLUG(dev) (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev) || IS_I965G(dev))
+#define I915_HAS_HOTPLUG(dev)		 (INTEL_INFO(dev)->has_hotplug)
 /* dsparb controlled by hw only */
 #define DSPARB_HWCONTROL(dev) (IS_G4X(dev) || IS_IRONLAKE(dev))
 
 #define HAS_FW_BLC(dev) (IS_I9XX(dev) || IS_G4X(dev) || IS_IRONLAKE(dev))
-#define HAS_PIPE_CXSR(dev) (IS_G4X(dev) || IS_IRONLAKE(dev))
-#define I915_HAS_FBC(dev) (IS_MOBILE(dev) && \
-			   (IS_I9XX(dev) || IS_GM45(dev)) && \
-			   !IS_PINEVIEW(dev) && \
-			   !IS_IRONLAKE(dev))
-#define I915_HAS_RC6(dev) (IS_I965GM(dev) || IS_GM45(dev) || IS_IRONLAKE_M(dev))
+#define HAS_PIPE_CXSR(dev) (INTEL_INFO(dev)->has_pipe_cxsr)
+#define I915_HAS_FBC(dev) (INTEL_INFO(dev)->has_fbc)
+#define I915_HAS_RC6(dev) (INTEL_INFO(dev)->has_rc6)
 
 #define PRIMARY_RINGBUFFER_SIZE         (128*1024)
 

drivers/gpu/drm/i915/i915_gem.c

@@ -2021,9 +2021,6 @@ i915_gem_object_unbind(struct drm_gem_object *obj)
 	/* blow away mappings if mapped through GTT */
 	i915_gem_release_mmap(obj);
 
-	if (obj_priv->fence_reg != I915_FENCE_REG_NONE)
-		i915_gem_clear_fence_reg(obj);
-
 	/* Move the object to the CPU domain to ensure that
 	 * any possible CPU writes while it's not in the GTT
 	 * are flushed when we go to remap it. This will
@@ -2039,6 +2036,10 @@ i915_gem_object_unbind(struct drm_gem_object *obj)
 
 	BUG_ON(obj_priv->active);
 
+	/* release the fence reg _after_ flushing */
+	if (obj_priv->fence_reg != I915_FENCE_REG_NONE)
+		i915_gem_clear_fence_reg(obj);
+
 	if (obj_priv->agp_mem != NULL) {
 		drm_unbind_agp(obj_priv->agp_mem);
 		drm_free_agp(obj_priv->agp_mem, obj->size / PAGE_SIZE);
@@ -2581,9 +2582,6 @@ i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment)
 	bool retry_alloc = false;
 	int ret;
 
-	if (dev_priv->mm.suspended)
-		return -EBUSY;
-
 	if (obj_priv->madv != I915_MADV_WILLNEED) {
 		DRM_ERROR("Attempting to bind a purgeable object\n");
 		return -EINVAL;
@@ -3198,7 +3196,7 @@ i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj,
 static int
 i915_gem_object_pin_and_relocate(struct drm_gem_object *obj,
 				 struct drm_file *file_priv,
-				 struct drm_i915_gem_exec_object *entry,
+				 struct drm_i915_gem_exec_object2 *entry,
 				 struct drm_i915_gem_relocation_entry *relocs)
 {
 	struct drm_device *dev = obj->dev;
@@ -3206,12 +3204,35 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj,
 	struct drm_i915_gem_object *obj_priv = obj->driver_private;
 	int i, ret;
 	void __iomem *reloc_page;
+	bool need_fence;
+
+	need_fence = entry->flags & EXEC_OBJECT_NEEDS_FENCE &&
+	             obj_priv->tiling_mode != I915_TILING_NONE;
+
+	/* Check fence reg constraints and rebind if necessary */
+	if (need_fence && !i915_obj_fenceable(dev, obj))
+		i915_gem_object_unbind(obj);
 
 	/* Choose the GTT offset for our buffer and put it there. */
 	ret = i915_gem_object_pin(obj, (uint32_t) entry->alignment);
 	if (ret)
 		return ret;
 
+	/*
+	 * Pre-965 chips need a fence register set up in order to
+	 * properly handle blits to/from tiled surfaces.
+	 */
+	if (need_fence) {
+		ret = i915_gem_object_get_fence_reg(obj);
+		if (ret != 0) {
+			if (ret != -EBUSY && ret != -ERESTARTSYS)
+				DRM_ERROR("Failure to install fence: %d\n",
+					  ret);
+			i915_gem_object_unpin(obj);
+			return ret;
+		}
+	}
+
 	entry->offset = obj_priv->gtt_offset;
 
 	/* Apply the relocations, using the GTT aperture to avoid cache
@@ -3373,7 +3394,7 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj,
  */
 static int
 i915_dispatch_gem_execbuffer(struct drm_device *dev,
-			      struct drm_i915_gem_execbuffer *exec,
+			      struct drm_i915_gem_execbuffer2 *exec,
 			      struct drm_clip_rect *cliprects,
 			      uint64_t exec_offset)
 {
@@ -3463,7 +3484,7 @@ i915_gem_ring_throttle(struct drm_device *dev, struct drm_file *file_priv)
 }
 
 static int
-i915_gem_get_relocs_from_user(struct drm_i915_gem_exec_object *exec_list,
+i915_gem_get_relocs_from_user(struct drm_i915_gem_exec_object2 *exec_list,
 			      uint32_t buffer_count,
 			      struct drm_i915_gem_relocation_entry **relocs)
 {
@@ -3478,8 +3499,10 @@ i915_gem_get_relocs_from_user(struct drm_i915_gem_exec_object *exec_list,
 	}
 
 	*relocs = drm_calloc_large(reloc_count, sizeof(**relocs));
-	if (*relocs == NULL)
+	if (*relocs == NULL) {
+		DRM_ERROR("failed to alloc relocs, count %d\n", reloc_count);
 		return -ENOMEM;
+	}
 
 	for (i = 0; i < buffer_count; i++) {
 		struct drm_i915_gem_relocation_entry __user *user_relocs;
@@ -3503,7 +3526,7 @@ i915_gem_get_relocs_from_user(struct drm_i915_gem_exec_object *exec_list,
 }
 
 static int
-i915_gem_put_relocs_to_user(struct drm_i915_gem_exec_object *exec_list,
+i915_gem_put_relocs_to_user(struct drm_i915_gem_exec_object2 *exec_list,
 			    uint32_t buffer_count,
 			    struct drm_i915_gem_relocation_entry *relocs)
 {
@@ -3536,7 +3559,7 @@ i915_gem_put_relocs_to_user(struct drm_i915_gem_exec_object *exec_list,
 }
 
 static int
-i915_gem_check_execbuffer (struct drm_i915_gem_execbuffer *exec,
+i915_gem_check_execbuffer (struct drm_i915_gem_execbuffer2 *exec,
 			   uint64_t exec_offset)
 {
 	uint32_t exec_start, exec_len;
@@ -3589,18 +3612,18 @@ i915_gem_wait_for_pending_flip(struct drm_device *dev,
 }
 
 int
-i915_gem_execbuffer(struct drm_device *dev, void *data,
-		    struct drm_file *file_priv)
+i915_gem_do_execbuffer(struct drm_device *dev, void *data,
+		       struct drm_file *file_priv,
+		       struct drm_i915_gem_execbuffer2 *args,
+		       struct drm_i915_gem_exec_object2 *exec_list)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
-	struct drm_i915_gem_execbuffer *args = data;
-	struct drm_i915_gem_exec_object *exec_list = NULL;
 	struct drm_gem_object **object_list = NULL;
 	struct drm_gem_object *batch_obj;
 	struct drm_i915_gem_object *obj_priv;
 	struct drm_clip_rect *cliprects = NULL;
 	struct drm_i915_gem_relocation_entry *relocs;
-	int ret, ret2, i, pinned = 0;
+	int ret = 0, ret2, i, pinned = 0;
 	uint64_t exec_offset;
 	uint32_t seqno, flush_domains, reloc_index;
 	int pin_tries, flips;
@@ -3614,25 +3637,13 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
 		DRM_ERROR("execbuf with %d buffers\n", args->buffer_count);
 		return -EINVAL;
 	}
-	/* Copy in the exec list from userland */
-	exec_list = drm_malloc_ab(sizeof(*exec_list), args->buffer_count);
 	object_list = drm_malloc_ab(sizeof(*object_list), args->buffer_count);
-	if (exec_list == NULL || object_list == NULL) {
-		DRM_ERROR("Failed to allocate exec or object list "
-			  "for %d buffers\n",
+	if (object_list == NULL) {
+		DRM_ERROR("Failed to allocate object list for %d buffers\n",
 			  args->buffer_count);
 		ret = -ENOMEM;
 		goto pre_mutex_err;
 	}
-	ret = copy_from_user(exec_list,
-			     (struct drm_i915_relocation_entry __user *)
-			     (uintptr_t) args->buffers_ptr,
-			     sizeof(*exec_list) * args->buffer_count);
-	if (ret != 0) {
-		DRM_ERROR("copy %d exec entries failed %d\n",
-			  args->buffer_count, ret);
-		goto pre_mutex_err;
-	}
 
 	if (args->num_cliprects != 0) {
 		cliprects = kcalloc(args->num_cliprects, sizeof(*cliprects),
@@ -3884,20 +3895,6 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
 
 	mutex_unlock(&dev->struct_mutex);
 
-	if (!ret) {
-		/* Copy the new buffer offsets back to the user's exec list. */
-		ret = copy_to_user((struct drm_i915_relocation_entry __user *)
-				   (uintptr_t) args->buffers_ptr,
-				   exec_list,
-				   sizeof(*exec_list) * args->buffer_count);
-		if (ret) {
-			ret = -EFAULT;
-			DRM_ERROR("failed to copy %d exec entries "
-				  "back to user (%d)\n",
-				  args->buffer_count, ret);
-		}
-	}
-
 	/* Copy the updated relocations out regardless of current error
 	 * state.  Failure to update the relocs would mean that the next
 	 * time userland calls execbuf, it would do so with presumed offset
@@ -3914,12 +3911,158 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
 
 pre_mutex_err:
 	drm_free_large(object_list);
-	drm_free_large(exec_list);
 	kfree(cliprects);
 
 	return ret;
 }
 
+/*
+ * Legacy execbuffer just creates an exec2 list from the original exec object
+ * list array and passes it to the real function.
+ */
+int
+i915_gem_execbuffer(struct drm_device *dev, void *data,
+		    struct drm_file *file_priv)
+{
+	struct drm_i915_gem_execbuffer *args = data;
+	struct drm_i915_gem_execbuffer2 exec2;
+	struct drm_i915_gem_exec_object *exec_list = NULL;
+	struct drm_i915_gem_exec_object2 *exec2_list = NULL;
+	int ret, i;
+
+#if WATCH_EXEC
+	DRM_INFO("buffers_ptr %d buffer_count %d len %08x\n",
+		  (int) args->buffers_ptr, args->buffer_count, args->batch_len);
+#endif
+
+	if (args->buffer_count < 1) {
+		DRM_ERROR("execbuf with %d buffers\n", args->buffer_count);
+		return -EINVAL;
+	}
+
+	/* Copy in the exec list from userland */
+	exec_list = drm_malloc_ab(sizeof(*exec_list), args->buffer_count);
+	exec2_list = drm_malloc_ab(sizeof(*exec2_list), args->buffer_count);
+	if (exec_list == NULL || exec2_list == NULL) {
+		DRM_ERROR("Failed to allocate exec list for %d buffers\n",
+			  args->buffer_count);
+		drm_free_large(exec_list);
+		drm_free_large(exec2_list);
+		return -ENOMEM;
+	}
+	ret = copy_from_user(exec_list,
+			     (struct drm_i915_relocation_entry __user *)
+			     (uintptr_t) args->buffers_ptr,
+			     sizeof(*exec_list) * args->buffer_count);
+	if (ret != 0) {
+		DRM_ERROR("copy %d exec entries failed %d\n",
+			  args->buffer_count, ret);
+		drm_free_large(exec_list);
+		drm_free_large(exec2_list);
+		return -EFAULT;
+	}
+
+	for (i = 0; i < args->buffer_count; i++) {
+		exec2_list[i].handle = exec_list[i].handle;
+		exec2_list[i].relocation_count = exec_list[i].relocation_count;
+		exec2_list[i].relocs_ptr = exec_list[i].relocs_ptr;
+		exec2_list[i].alignment = exec_list[i].alignment;
+		exec2_list[i].offset = exec_list[i].offset;
+		if (!IS_I965G(dev))
+			exec2_list[i].flags = EXEC_OBJECT_NEEDS_FENCE;
+		else
+			exec2_list[i].flags = 0;
+	}
+
+	exec2.buffers_ptr = args->buffers_ptr;
+	exec2.buffer_count = args->buffer_count;
+	exec2.batch_start_offset = args->batch_start_offset;
+	exec2.batch_len = args->batch_len;
+	exec2.DR1 = args->DR1;
+	exec2.DR4 = args->DR4;
+	exec2.num_cliprects = args->num_cliprects;
+	exec2.cliprects_ptr = args->cliprects_ptr;
+	exec2.flags = 0;
+
+	ret = i915_gem_do_execbuffer(dev, data, file_priv, &exec2, exec2_list);
+	if (!ret) {
+		/* Copy the new buffer offsets back to the user's exec list. */
+		for (i = 0; i < args->buffer_count; i++)
+			exec_list[i].offset = exec2_list[i].offset;
+		/* ... and back out to userspace */
+		ret = copy_to_user((struct drm_i915_relocation_entry __user *)
+				   (uintptr_t) args->buffers_ptr,
+				   exec_list,
+				   sizeof(*exec_list) * args->buffer_count);
+		if (ret) {
+			ret = -EFAULT;
+			DRM_ERROR("failed to copy %d exec entries "
+				  "back to user (%d)\n",
+				  args->buffer_count, ret);
+		}
+	} else {
+		DRM_ERROR("i915_gem_do_execbuffer returns %d\n", ret);
+	}
+
+	drm_free_large(exec_list);
+	drm_free_large(exec2_list);
+	return ret;
+}
+
+int
+i915_gem_execbuffer2(struct drm_device *dev, void *data,
+		     struct drm_file *file_priv)
+{
+	struct drm_i915_gem_execbuffer2 *args = data;
+	struct drm_i915_gem_exec_object2 *exec2_list = NULL;
+	int ret;
+
+#if WATCH_EXEC
+	DRM_INFO("buffers_ptr %d buffer_count %d len %08x\n",
+		  (int) args->buffers_ptr, args->buffer_count, args->batch_len);
+#endif
+
+	if (args->buffer_count < 1) {
+		DRM_ERROR("execbuf2 with %d buffers\n", args->buffer_count);
+		return -EINVAL;
+	}
+
+	exec2_list = drm_malloc_ab(sizeof(*exec2_list), args->buffer_count);
+	if (exec2_list == NULL) {
+		DRM_ERROR("Failed to allocate exec list for %d buffers\n",
+			  args->buffer_count);
+		return -ENOMEM;
+	}
+	ret = copy_from_user(exec2_list,
+			     (struct drm_i915_relocation_entry __user *)
+			     (uintptr_t) args->buffers_ptr,
+			     sizeof(*exec2_list) * args->buffer_count);
+	if (ret != 0) {
+		DRM_ERROR("copy %d exec entries failed %d\n",
+			  args->buffer_count, ret);
+		drm_free_large(exec2_list);
+		return -EFAULT;
+	}
+
+	ret = i915_gem_do_execbuffer(dev, data, file_priv, args, exec2_list);
+	if (!ret) {
+		/* Copy the new buffer offsets back to the user's exec list. */
+		ret = copy_to_user((struct drm_i915_relocation_entry __user *)
+				   (uintptr_t) args->buffers_ptr,
+				   exec2_list,
+				   sizeof(*exec2_list) * args->buffer_count);
+		if (ret) {
+			ret = -EFAULT;
+			DRM_ERROR("failed to copy %d exec entries "
+				  "back to user (%d)\n",
+				  args->buffer_count, ret);
+		}
+	}
+
+	drm_free_large(exec2_list);
+	return ret;
+}
+
 int
 i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment)
 {
@@ -3933,19 +4076,7 @@ i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment)
 		if (ret)
 			return ret;
 	}
-	/*
-	 * Pre-965 chips need a fence register set up in order to
-	 * properly handle tiled surfaces.
-	 */
-	if (!IS_I965G(dev) && obj_priv->tiling_mode != I915_TILING_NONE) {
-		ret = i915_gem_object_get_fence_reg(obj);
-		if (ret != 0) {
-			if (ret != -EBUSY && ret != -ERESTARTSYS)
-				DRM_ERROR("Failure to install fence: %d\n",
-					  ret);
-			return ret;
-		}
-	}
+
 	obj_priv->pin_count++;
 
 	/* If the object is not active and not pending a flush,

drivers/gpu/drm/i915/i915_gem_tiling.c

@@ -304,35 +304,39 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev)
 
 
 /**
- * Returns the size of the fence for a tiled object of the given size.
+ * Returns whether an object is currently fenceable.  If not, it may need
+ * to be unbound and have its pitch adjusted.
  */
-static int
-i915_get_fence_size(struct drm_device *dev, int size)
+bool
+i915_obj_fenceable(struct drm_device *dev, struct drm_gem_object *obj)
 {
-	int i;
-	int start;
+	struct drm_i915_gem_object *obj_priv = obj->driver_private;
 
 	if (IS_I965G(dev)) {
 		/* The 965 can have fences at any page boundary. */
-		return ALIGN(size, 4096);
+		if (obj->size & 4095)
+			return false;
+		return true;
+	} else if (IS_I9XX(dev)) {
+		if (obj_priv->gtt_offset & ~I915_FENCE_START_MASK)
+			return false;
 	} else {
-		/* Align the size to a power of two greater than the smallest
-		 * fence size.
-		 */
-		if (IS_I9XX(dev))
-			start = 1024 * 1024;
-		else
-			start = 512 * 1024;
+		if (obj_priv->gtt_offset & ~I830_FENCE_START_MASK)
+			return false;
+	}
 
-		for (i = start; i < size; i <<= 1)
-			;
+	/* Power of two sized... */
+	if (obj->size & (obj->size - 1))
+		return false;
 
-		return i;
-	}
+	/* Objects must be size aligned as well */
+	if (obj_priv->gtt_offset & (obj->size - 1))
+		return false;
+	return true;
 }
 
 /* Check pitch constriants for all chips & tiling formats */
-static bool
+bool
 i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode)
 {
 	int tile_width;
@@ -384,12 +388,6 @@ i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode)
 	if (stride & (stride - 1))
 		return false;
 
-	/* We don't 0handle the aperture area covered by the fence being bigger
-	 * than the object size.
-	 */
-	if (i915_get_fence_size(dev, size) != size)
-		return false;
-
 	return true;
 }
 

drivers/gpu/drm/i915/i915_irq.c

@@ -313,6 +313,8 @@ irqreturn_t ironlake_irq_handler(struct drm_device *dev)
 			dev_priv->mm.irq_gem_seqno = seqno;
 			trace_i915_gem_request_complete(dev, seqno);
 			DRM_WAKEUP(&dev_priv->irq_queue);
+			dev_priv->hangcheck_count = 0;
+			mod_timer(&dev_priv->hangcheck_timer, jiffies + DRM_I915_HANGCHECK_PERIOD);
 		}
 
 		if (de_iir & DE_GSE)
@@ -1084,6 +1086,10 @@ void i915_driver_irq_preinstall(struct drm_device * dev)
 	(void) I915_READ(IER);
 }
 
+/*
+ * Must be called after intel_modeset_init or hotplug interrupts won't be
+ * enabled correctly.
+ */
 int i915_driver_irq_postinstall(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
@@ -1106,19 +1112,23 @@ int i915_driver_irq_postinstall(struct drm_device *dev)
 	if (I915_HAS_HOTPLUG(dev)) {
 		u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
 
-		/* Leave other bits alone */
-		hotplug_en |= HOTPLUG_EN_MASK;
+		/* Note HDMI and DP share bits */
+		if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
+			hotplug_en |= HDMIB_HOTPLUG_INT_EN;
+		if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS)
+			hotplug_en |= HDMIC_HOTPLUG_INT_EN;
+		if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS)
+			hotplug_en |= HDMID_HOTPLUG_INT_EN;
+		if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS)
+			hotplug_en |= SDVOC_HOTPLUG_INT_EN;
+		if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS)
+			hotplug_en |= SDVOB_HOTPLUG_INT_EN;
+		if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS)
+			hotplug_en |= CRT_HOTPLUG_INT_EN;
+		/* Ignore TV since it's buggy */
+
 		I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
 
-		dev_priv->hotplug_supported_mask = CRT_HOTPLUG_INT_STATUS |
-			TV_HOTPLUG_INT_STATUS | SDVOC_HOTPLUG_INT_STATUS |
-			SDVOB_HOTPLUG_INT_STATUS;
-		if (IS_G4X(dev)) {
-			dev_priv->hotplug_supported_mask |=
-				HDMIB_HOTPLUG_INT_STATUS |
-				HDMIC_HOTPLUG_INT_STATUS |
-				HDMID_HOTPLUG_INT_STATUS;
-		}
 		/* Enable in IER... */
 		enable_mask |= I915_DISPLAY_PORT_INTERRUPT;
 		/* and unmask in IMR */

drivers/gpu/drm/i915/i915_reg.h

@@ -879,13 +879,6 @@
 #define CRT_HOTPLUG_DETECT_VOLTAGE_475MV	(1 << 2)
 #define CRT_HOTPLUG_MASK			(0x3fc) /* Bits 9-2 */
 #define CRT_FORCE_HOTPLUG_MASK			0xfffffe1f
-#define HOTPLUG_EN_MASK (HDMIB_HOTPLUG_INT_EN | \
-			 HDMIC_HOTPLUG_INT_EN |	  \
-			 HDMID_HOTPLUG_INT_EN |	  \
-			 SDVOB_HOTPLUG_INT_EN |	  \
-			 SDVOC_HOTPLUG_INT_EN |	  \
-			 CRT_HOTPLUG_INT_EN)
-
 
 #define PORT_HOTPLUG_STAT	0x61114
 #define   HDMIB_HOTPLUG_INT_STATUS		(1 << 29)
@@ -982,6 +975,8 @@
 #define   LVDS_PORT_EN			(1 << 31)
 /* Selects pipe B for LVDS data.  Must be set on pre-965. */
 #define   LVDS_PIPEB_SELECT		(1 << 30)
+/* LVDS dithering flag on 965/g4x platform */
+#define   LVDS_ENABLE_DITHER		(1 << 25)
 /* Enable border for unscaled (or aspect-scaled) display */
 #define   LVDS_BORDER_ENABLE		(1 << 15)
 /*
@@ -1751,6 +1746,8 @@
 
 /* Display & cursor control */
 
+/* dithering flag on Ironlake */
+#define PIPE_ENABLE_DITHER	(1 << 4)
 /* Pipe A */
 #define PIPEADSL		0x70000
 #define PIPEACONF		0x70008

drivers/gpu/drm/i915/i915_suspend.c

@@ -732,12 +732,6 @@ int i915_save_state(struct drm_device *dev)
 
 	pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB);
 
-	/* Render Standby */
-	if (I915_HAS_RC6(dev)) {
-		dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY);
-		dev_priv->savePWRCTXA = I915_READ(PWRCTXA);
-	}
-
 	/* Hardware status page */
 	dev_priv->saveHWS = I915_READ(HWS_PGA);
 
@@ -793,12 +787,6 @@ int i915_restore_state(struct drm_device *dev)
 
 	pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB);
 
-	/* Render Standby */
-	if (I915_HAS_RC6(dev)) {
-		I915_WRITE(MCHBAR_RENDER_STANDBY, dev_priv->saveRENDERSTANDBY);
-		I915_WRITE(PWRCTXA, dev_priv->savePWRCTXA);
-	}
-
 	/* Hardware status page */
 	I915_WRITE(HWS_PGA, dev_priv->saveHWS);
 

drivers/gpu/drm/i915/intel_crt.c

@@ -548,4 +548,6 @@ void intel_crt_init(struct drm_device *dev)
 	drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
 
 	drm_sysfs_connector_add(connector);
+
+	dev_priv->hotplug_supported_mask |= CRT_HOTPLUG_INT_STATUS;
 }

drivers/gpu/drm/i915/intel_display.c

@@ -262,6 +262,14 @@ struct intel_limit {
 #define IRONLAKE_P2_LVDS_FAST    7  /* double channel */
 #define IRONLAKE_P2_DOT_LIMIT    225000 /* 225Mhz */
 
+#define IRONLAKE_P_DISPLAY_PORT_MIN	10
+#define IRONLAKE_P_DISPLAY_PORT_MAX	20
+#define IRONLAKE_P2_DISPLAY_PORT_FAST	10
+#define IRONLAKE_P2_DISPLAY_PORT_SLOW	10
+#define IRONLAKE_P2_DISPLAY_PORT_LIMIT	0
+#define IRONLAKE_P1_DISPLAY_PORT_MIN	1
+#define IRONLAKE_P1_DISPLAY_PORT_MAX	2
+
 static bool
 intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 		    int target, int refclk, intel_clock_t *best_clock);
@@ -271,9 +279,6 @@ intel_find_best_reduced_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 static bool
 intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 			int target, int refclk, intel_clock_t *best_clock);
-static bool
-intel_ironlake_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
-			     int target, int refclk, intel_clock_t *best_clock);
 
 static bool
 intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc,
@@ -496,7 +501,7 @@ static const intel_limit_t intel_limits_ironlake_sdvo = {
 	.p2  = { .dot_limit = IRONLAKE_P2_DOT_LIMIT,
 		 .p2_slow = IRONLAKE_P2_SDVO_DAC_SLOW,
 		 .p2_fast = IRONLAKE_P2_SDVO_DAC_FAST },
-	.find_pll = intel_ironlake_find_best_PLL,
+	.find_pll = intel_g4x_find_best_PLL,
 };
 
 static const intel_limit_t intel_limits_ironlake_lvds = {
@@ -511,7 +516,30 @@ static const intel_limit_t intel_limits_ironlake_lvds = {
 	.p2  = { .dot_limit = IRONLAKE_P2_DOT_LIMIT,
 		 .p2_slow = IRONLAKE_P2_LVDS_SLOW,
 		 .p2_fast = IRONLAKE_P2_LVDS_FAST },
-	.find_pll = intel_ironlake_find_best_PLL,
+	.find_pll = intel_g4x_find_best_PLL,
+};
+
+static const intel_limit_t intel_limits_ironlake_display_port = {
+        .dot = { .min = IRONLAKE_DOT_MIN,
+                 .max = IRONLAKE_DOT_MAX },
+        .vco = { .min = IRONLAKE_VCO_MIN,
+                 .max = IRONLAKE_VCO_MAX},
+        .n   = { .min = IRONLAKE_N_MIN,
+                 .max = IRONLAKE_N_MAX },
+        .m   = { .min = IRONLAKE_M_MIN,
+                 .max = IRONLAKE_M_MAX },
+        .m1  = { .min = IRONLAKE_M1_MIN,
+                 .max = IRONLAKE_M1_MAX },
+        .m2  = { .min = IRONLAKE_M2_MIN,
+                 .max = IRONLAKE_M2_MAX },
+        .p   = { .min = IRONLAKE_P_DISPLAY_PORT_MIN,
+                 .max = IRONLAKE_P_DISPLAY_PORT_MAX },
+        .p1  = { .min = IRONLAKE_P1_DISPLAY_PORT_MIN,
+                 .max = IRONLAKE_P1_DISPLAY_PORT_MAX},
+        .p2  = { .dot_limit = IRONLAKE_P2_DISPLAY_PORT_LIMIT,
+                 .p2_slow = IRONLAKE_P2_DISPLAY_PORT_SLOW,
+                 .p2_fast = IRONLAKE_P2_DISPLAY_PORT_FAST },
+        .find_pll = intel_find_pll_ironlake_dp,
 };
 
 static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc)
@@ -519,6 +547,9 @@ static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc)
 	const intel_limit_t *limit;
 	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
 		limit = &intel_limits_ironlake_lvds;
+	else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
+			HAS_eDP)
+		limit = &intel_limits_ironlake_display_port;
 	else
 		limit = &intel_limits_ironlake_sdvo;
 
@@ -791,7 +822,13 @@ intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 	found = false;
 
 	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
-		if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
+		int lvds_reg;
+
+		if (IS_IRONLAKE(dev))
+			lvds_reg = PCH_LVDS;
+		else
+			lvds_reg = LVDS;
+		if ((I915_READ(lvds_reg) & LVDS_CLKB_POWER_MASK) ==
 		    LVDS_CLKB_POWER_UP)
 			clock.p2 = limit->p2.p2_fast;
 		else
@@ -839,6 +876,11 @@ intel_find_pll_ironlake_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
 {
 	struct drm_device *dev = crtc->dev;
 	intel_clock_t clock;
+
+	/* return directly when it is eDP */
+	if (HAS_eDP)
+		return true;
+
 	if (target < 200000) {
 		clock.n = 1;
 		clock.p1 = 2;
@@ -857,68 +899,6 @@ intel_find_pll_ironlake_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
 	return true;
 }
 
-static bool
-intel_ironlake_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
-			     int target, int refclk, intel_clock_t *best_clock)
-{
-	struct drm_device *dev = crtc->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	intel_clock_t clock;
-	int err_most = 47;
-	int err_min = 10000;
-
-	/* eDP has only 2 clock choice, no n/m/p setting */
-	if (HAS_eDP)
-		return true;
-
-	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
-		return intel_find_pll_ironlake_dp(limit, crtc, target,
-					       refclk, best_clock);
-
-	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
-		if ((I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) ==
-		    LVDS_CLKB_POWER_UP)
-			clock.p2 = limit->p2.p2_fast;
-		else
-			clock.p2 = limit->p2.p2_slow;
-	} else {
-		if (target < limit->p2.dot_limit)
-			clock.p2 = limit->p2.p2_slow;
-		else
-			clock.p2 = limit->p2.p2_fast;
-	}
-
-	memset(best_clock, 0, sizeof(*best_clock));
-	for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
-		/* based on hardware requriment prefer smaller n to precision */
-		for (clock.n = limit->n.min; clock.n <= limit->n.max; clock.n++) {
-			/* based on hardware requirment prefere larger m1,m2 */
-			for (clock.m1 = limit->m1.max;
-			     clock.m1 >= limit->m1.min; clock.m1--) {
-				for (clock.m2 = limit->m2.max;
-				     clock.m2 >= limit->m2.min; clock.m2--) {
-					int this_err;
-
-					intel_clock(dev, refclk, &clock);
-					if (!intel_PLL_is_valid(crtc, &clock))
-						continue;
-					this_err = abs((10000 - (target*10000/clock.dot)));
-					if (this_err < err_most) {
-						*best_clock = clock;
-						/* found on first matching */
-						goto out;
-					} else if (this_err < err_min) {
-						*best_clock = clock;
-						err_min = this_err;
-					}
-				}
-			}
-		}
-	}
-out:
-	return true;
-}
-
 /* DisplayPort has only two frequencies, 162MHz and 270MHz */
 static bool
 intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
@@ -1493,6 +1473,10 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
 	int trans_vsync_reg = (pipe == 0) ? TRANS_VSYNC_A : TRANS_VSYNC_B;
 	u32 temp;
 	int tries = 5, j, n;
+	u32 pipe_bpc;
+
+	temp = I915_READ(pipeconf_reg);
+	pipe_bpc = temp & PIPE_BPC_MASK;
 
 	/* XXX: When our outputs are all unaware of DPMS modes other than off
 	 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
@@ -1524,6 +1508,12 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
 
 			/* enable PCH FDI RX PLL, wait warmup plus DMI latency */
 			temp = I915_READ(fdi_rx_reg);
+			/*
+			 * make the BPC in FDI Rx be consistent with that in
+			 * pipeconf reg.
+			 */
+			temp &= ~(0x7 << 16);
+			temp |= (pipe_bpc << 11);
 			I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE |
 					FDI_SEL_PCDCLK |
 					FDI_DP_PORT_WIDTH_X4); /* default 4 lanes */
@@ -1666,6 +1656,12 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
 
 			/* enable PCH transcoder */
 			temp = I915_READ(transconf_reg);
+			/*
+			 * make the BPC in transcoder be consistent with
+			 * that in pipeconf reg.
+			 */
+			temp &= ~PIPE_BPC_MASK;
+			temp |= pipe_bpc;
 			I915_WRITE(transconf_reg, temp | TRANS_ENABLE);
 			I915_READ(transconf_reg);
 
@@ -1745,6 +1741,9 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
 		I915_READ(fdi_tx_reg);
 
 		temp = I915_READ(fdi_rx_reg);
+		/* BPC in FDI rx is consistent with that in pipeconf */
+		temp &= ~(0x07 << 16);
+		temp |= (pipe_bpc << 11);
 		I915_WRITE(fdi_rx_reg, temp & ~FDI_RX_ENABLE);
 		I915_READ(fdi_rx_reg);
 
@@ -1789,7 +1788,12 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
 				}
 			}
 		}
-
+		temp = I915_READ(transconf_reg);
+		/* BPC in transcoder is consistent with that in pipeconf */
+		temp &= ~PIPE_BPC_MASK;
+		temp |= pipe_bpc;
+		I915_WRITE(transconf_reg, temp);
+		I915_READ(transconf_reg);
 		udelay(100);
 
 		/* disable PCH DPLL */
@@ -2448,7 +2452,7 @@ static void pineview_enable_cxsr(struct drm_device *dev, unsigned long clock,
  * A value of 5us seems to be a good balance; safe for very low end
  * platforms but not overly aggressive on lower latency configs.
  */
-const static int latency_ns = 5000;
+static const int latency_ns = 5000;
 
 static int i9xx_get_fifo_size(struct drm_device *dev, int plane)
 {
@@ -2559,7 +2563,7 @@ static void g4x_update_wm(struct drm_device *dev,  int planea_clock,
 	/* Calc sr entries for one plane configs */
 	if (sr_hdisplay && (!planea_clock || !planeb_clock)) {
 		/* self-refresh has much higher latency */
-		const static int sr_latency_ns = 12000;
+		static const int sr_latency_ns = 12000;
 
 		sr_clock = planea_clock ? planea_clock : planeb_clock;
 		line_time_us = ((sr_hdisplay * 1000) / sr_clock);
@@ -2598,7 +2602,7 @@ static void i965_update_wm(struct drm_device *dev, int planea_clock,
 	/* Calc sr entries for one plane configs */
 	if (sr_hdisplay && (!planea_clock || !planeb_clock)) {
 		/* self-refresh has much higher latency */
-		const static int sr_latency_ns = 12000;
+		static const int sr_latency_ns = 12000;
 
 		sr_clock = planea_clock ? planea_clock : planeb_clock;
 		line_time_us = ((sr_hdisplay * 1000) / sr_clock);
@@ -2667,7 +2671,7 @@ static void i9xx_update_wm(struct drm_device *dev, int planea_clock,
 	if (HAS_FW_BLC(dev) && sr_hdisplay &&
 	    (!planea_clock || !planeb_clock)) {
 		/* self-refresh has much higher latency */
-		const static int sr_latency_ns = 6000;
+		static const int sr_latency_ns = 6000;
 
 		sr_clock = planea_clock ? planea_clock : planeb_clock;
 		line_time_us = ((sr_hdisplay * 1000) / sr_clock);
@@ -2969,6 +2973,18 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 
 		/* determine panel color depth */
 		temp = I915_READ(pipeconf_reg);
+		temp &= ~PIPE_BPC_MASK;
+		if (is_lvds) {
+			int lvds_reg = I915_READ(PCH_LVDS);
+			/* the BPC will be 6 if it is 18-bit LVDS panel */
+			if ((lvds_reg & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP)
+				temp |= PIPE_8BPC;
+			else
+				temp |= PIPE_6BPC;
+		} else
+			temp |= PIPE_8BPC;
+		I915_WRITE(pipeconf_reg, temp);
+		I915_READ(pipeconf_reg);
 
 		switch (temp & PIPE_BPC_MASK) {
 		case PIPE_8BPC:
@@ -3195,7 +3211,20 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 		 * appropriately here, but we need to look more thoroughly into how
 		 * panels behave in the two modes.
 		 */
-
+		/* set the dithering flag */
+		if (IS_I965G(dev)) {
+			if (dev_priv->lvds_dither) {
+				if (IS_IRONLAKE(dev))
+					pipeconf |= PIPE_ENABLE_DITHER;
+				else
+					lvds |= LVDS_ENABLE_DITHER;
+			} else {
+				if (IS_IRONLAKE(dev))
+					pipeconf &= ~PIPE_ENABLE_DITHER;
+				else
+					lvds &= ~LVDS_ENABLE_DITHER;
+			}
+		}
 		I915_WRITE(lvds_reg, lvds);
 		I915_READ(lvds_reg);
 	}
@@ -3385,7 +3414,7 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc,
 
 	/* we only need to pin inside GTT if cursor is non-phy */
 	mutex_lock(&dev->struct_mutex);
-	if (!dev_priv->cursor_needs_physical) {
+	if (!dev_priv->info->cursor_needs_physical) {
 		ret = i915_gem_object_pin(bo, PAGE_SIZE);
 		if (ret) {
 			DRM_ERROR("failed to pin cursor bo\n");
@@ -3420,7 +3449,7 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc,
 	I915_WRITE(base, addr);
 
 	if (intel_crtc->cursor_bo) {
-		if (dev_priv->cursor_needs_physical) {
+		if (dev_priv->info->cursor_needs_physical) {
 			if (intel_crtc->cursor_bo != bo)
 				i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo);
 		} else
@@ -3779,125 +3808,6 @@ static void intel_gpu_idle_timer(unsigned long arg)
 	queue_work(dev_priv->wq, &dev_priv->idle_work);
 }
 
-void intel_increase_renderclock(struct drm_device *dev, bool schedule)
-{
-	drm_i915_private_t *dev_priv = dev->dev_private;
-
-	if (IS_IRONLAKE(dev))
-		return;
-
-	if (!dev_priv->render_reclock_avail) {
-		DRM_DEBUG_DRIVER("not reclocking render clock\n");
-		return;
-	}
-
-	/* Restore render clock frequency to original value */
-	if (IS_G4X(dev) || IS_I9XX(dev))
-		pci_write_config_word(dev->pdev, GCFGC, dev_priv->orig_clock);
-	else if (IS_I85X(dev))
-		pci_write_config_word(dev->pdev, HPLLCC, dev_priv->orig_clock);
-	DRM_DEBUG_DRIVER("increasing render clock frequency\n");
-
-	/* Schedule downclock */
-	if (schedule)
-		mod_timer(&dev_priv->idle_timer, jiffies +
-			  msecs_to_jiffies(GPU_IDLE_TIMEOUT));
-}
-
-void intel_decrease_renderclock(struct drm_device *dev)
-{
-	drm_i915_private_t *dev_priv = dev->dev_private;
-
-	if (IS_IRONLAKE(dev))
-		return;
-
-	if (!dev_priv->render_reclock_avail) {
-		DRM_DEBUG_DRIVER("not reclocking render clock\n");
-		return;
-	}
-
-	if (IS_G4X(dev)) {
-		u16 gcfgc;
-
-		/* Adjust render clock... */
-		pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
-
-		/* Down to minimum... */
-		gcfgc &= ~GM45_GC_RENDER_CLOCK_MASK;
-		gcfgc |= GM45_GC_RENDER_CLOCK_266_MHZ;
-
-		pci_write_config_word(dev->pdev, GCFGC, gcfgc);
-	} else if (IS_I965G(dev)) {
-		u16 gcfgc;
-
-		/* Adjust render clock... */
-		pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
-
-		/* Down to minimum... */
-		gcfgc &= ~I965_GC_RENDER_CLOCK_MASK;
-		gcfgc |= I965_GC_RENDER_CLOCK_267_MHZ;
-
-		pci_write_config_word(dev->pdev, GCFGC, gcfgc);
-	} else if (IS_I945G(dev) || IS_I945GM(dev)) {
-		u16 gcfgc;
-
-		/* Adjust render clock... */
-		pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
-
-		/* Down to minimum... */
-		gcfgc &= ~I945_GC_RENDER_CLOCK_MASK;
-		gcfgc |= I945_GC_RENDER_CLOCK_166_MHZ;
-
-		pci_write_config_word(dev->pdev, GCFGC, gcfgc);
-	} else if (IS_I915G(dev)) {
-		u16 gcfgc;
-
-		/* Adjust render clock... */
-		pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
-
-		/* Down to minimum... */
-		gcfgc &= ~I915_GC_RENDER_CLOCK_MASK;
-		gcfgc |= I915_GC_RENDER_CLOCK_166_MHZ;
-
-		pci_write_config_word(dev->pdev, GCFGC, gcfgc);
-	} else if (IS_I85X(dev)) {
-		u16 hpllcc;
-
-		/* Adjust render clock... */
-		pci_read_config_word(dev->pdev, HPLLCC, &hpllcc);
-
-		/* Up to maximum... */
-		hpllcc &= ~GC_CLOCK_CONTROL_MASK;
-		hpllcc |= GC_CLOCK_133_200;
-
-		pci_write_config_word(dev->pdev, HPLLCC, hpllcc);
-	}
-	DRM_DEBUG_DRIVER("decreasing render clock frequency\n");
-}
-
-/* Note that no increase function is needed for this - increase_renderclock()
- *  will also rewrite these bits
- */
-void intel_decrease_displayclock(struct drm_device *dev)
-{
-	if (IS_IRONLAKE(dev))
-		return;
-
-	if (IS_I945G(dev) || IS_I945GM(dev) || IS_I915G(dev) ||
-	    IS_I915GM(dev)) {
-		u16 gcfgc;
-
-		/* Adjust render clock... */
-		pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
-
-		/* Down to minimum... */
-		gcfgc &= ~0xf0;
-		gcfgc |= 0x80;
-
-		pci_write_config_word(dev->pdev, GCFGC, gcfgc);
-	}
-}
-
 #define CRTC_IDLE_TIMEOUT 1000 /* ms */
 
 static void intel_crtc_idle_timer(unsigned long arg)
@@ -4011,12 +3921,6 @@ static void intel_idle_update(struct work_struct *work)
 
 	mutex_lock(&dev->struct_mutex);
 
-	/* GPU isn't processing, downclock it. */
-	if (!dev_priv->busy) {
-		intel_decrease_renderclock(dev);
-		intel_decrease_displayclock(dev);
-	}
-
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
 		/* Skip inactive CRTCs */
 		if (!crtc->fb)
@@ -4050,13 +3954,11 @@ void intel_mark_busy(struct drm_device *dev, struct drm_gem_object *obj)
 	if (!drm_core_check_feature(dev, DRIVER_MODESET))
 		return;
 
-	if (!dev_priv->busy) {
+	if (!dev_priv->busy)
 		dev_priv->busy = true;
-		intel_increase_renderclock(dev, true);
-	} else {
+	else
 		mod_timer(&dev_priv->idle_timer, jiffies +
 			  msecs_to_jiffies(GPU_IDLE_TIMEOUT));
-	}
 
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
 		if (!crtc->fb)
@@ -4400,29 +4302,43 @@ static void intel_setup_outputs(struct drm_device *dev)
 		bool found = false;
 
 		if (I915_READ(SDVOB) & SDVO_DETECTED) {
+			DRM_DEBUG_KMS("probing SDVOB\n");
 			found = intel_sdvo_init(dev, SDVOB);
-			if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
+			if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) {
+				DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
 				intel_hdmi_init(dev, SDVOB);
+			}
 
-			if (!found && SUPPORTS_INTEGRATED_DP(dev))
+			if (!found && SUPPORTS_INTEGRATED_DP(dev)) {
+				DRM_DEBUG_KMS("probing DP_B\n");
 				intel_dp_init(dev, DP_B);
+			}
 		}
 
 		/* Before G4X SDVOC doesn't have its own detect register */
 
-		if (I915_READ(SDVOB) & SDVO_DETECTED)
+		if (I915_READ(SDVOB) & SDVO_DETECTED) {
+			DRM_DEBUG_KMS("probing SDVOC\n");
 			found = intel_sdvo_init(dev, SDVOC);
+		}
 
 		if (!found && (I915_READ(SDVOC) & SDVO_DETECTED)) {
 
-			if (SUPPORTS_INTEGRATED_HDMI(dev))
+			if (SUPPORTS_INTEGRATED_HDMI(dev)) {
+				DRM_DEBUG_KMS("probing HDMI on SDVOC\n");
 				intel_hdmi_init(dev, SDVOC);
-			if (SUPPORTS_INTEGRATED_DP(dev))
+			}
+			if (SUPPORTS_INTEGRATED_DP(dev)) {
+				DRM_DEBUG_KMS("probing DP_C\n");
 				intel_dp_init(dev, DP_C);
+			}
 		}
 
-		if (SUPPORTS_INTEGRATED_DP(dev) && (I915_READ(DP_D) & DP_DETECTED))
+		if (SUPPORTS_INTEGRATED_DP(dev) &&
+		    (I915_READ(DP_D) & DP_DETECTED)) {
+			DRM_DEBUG_KMS("probing DP_D\n");
 			intel_dp_init(dev, DP_D);
+		}
 	} else if (IS_I8XX(dev))
 		intel_dvo_init(dev);
 
@@ -4527,6 +4443,42 @@ static const struct drm_mode_config_funcs intel_mode_funcs = {
 	.fb_changed = intelfb_probe,
 };
 
+static struct drm_gem_object *
+intel_alloc_power_context(struct drm_device *dev)
+{
+	struct drm_gem_object *pwrctx;
+	int ret;
+
+	pwrctx = drm_gem_object_alloc(dev, 4096);
+	if (!pwrctx) {
+		DRM_DEBUG("failed to alloc power context, RC6 disabled\n");
+		return NULL;
+	}
+
+	mutex_lock(&dev->struct_mutex);
+	ret = i915_gem_object_pin(pwrctx, 4096);
+	if (ret) {
+		DRM_ERROR("failed to pin power context: %d\n", ret);
+		goto err_unref;
+	}
+
+	ret = i915_gem_object_set_to_gtt_domain(pwrctx, 1);
+	if (ret) {
+		DRM_ERROR("failed to set-domain on power context: %d\n", ret);
+		goto err_unpin;
+	}
+	mutex_unlock(&dev->struct_mutex);
+
+	return pwrctx;
+
+err_unpin:
+	i915_gem_object_unpin(pwrctx);
+err_unref:
+	drm_gem_object_unreference(pwrctx);
+	mutex_unlock(&dev->struct_mutex);
+	return NULL;
+}
+
 void intel_init_clock_gating(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -4579,42 +4531,27 @@ void intel_init_clock_gating(struct drm_device *dev)
 	 * GPU can automatically power down the render unit if given a page
 	 * to save state.
 	 */
-	if (I915_HAS_RC6(dev)) {
-		struct drm_gem_object *pwrctx;
-		struct drm_i915_gem_object *obj_priv;
-		int ret;
+	if (I915_HAS_RC6(dev) && drm_core_check_feature(dev, DRIVER_MODESET)) {
+		struct drm_i915_gem_object *obj_priv = NULL;
 
 		if (dev_priv->pwrctx) {
 			obj_priv = dev_priv->pwrctx->driver_private;
 		} else {
-			pwrctx = drm_gem_object_alloc(dev, 4096);
-			if (!pwrctx) {
-				DRM_DEBUG("failed to alloc power context, "
-					  "RC6 disabled\n");
-				goto out;
-			}
+			struct drm_gem_object *pwrctx;
 
-			ret = i915_gem_object_pin(pwrctx, 4096);
-			if (ret) {
-				DRM_ERROR("failed to pin power context: %d\n",
-					  ret);
-				drm_gem_object_unreference(pwrctx);
-				goto out;
+			pwrctx = intel_alloc_power_context(dev);
+			if (pwrctx) {
+				dev_priv->pwrctx = pwrctx;
+				obj_priv = pwrctx->driver_private;
 			}
-
-			i915_gem_object_set_to_gtt_domain(pwrctx, 1);
-
-			dev_priv->pwrctx = pwrctx;
-			obj_priv = pwrctx->driver_private;
 		}
 
-		I915_WRITE(PWRCTXA, obj_priv->gtt_offset | PWRCTX_EN);
-		I915_WRITE(MCHBAR_RENDER_STANDBY,
-			   I915_READ(MCHBAR_RENDER_STANDBY) & ~RCX_SW_EXIT);
+		if (obj_priv) {
+			I915_WRITE(PWRCTXA, obj_priv->gtt_offset | PWRCTX_EN);
+			I915_WRITE(MCHBAR_RENDER_STANDBY,
+				   I915_READ(MCHBAR_RENDER_STANDBY) & ~RCX_SW_EXIT);
+		}
 	}
-
-out:
-	return;
 }
 
 /* Set up chip specific display functions */
@@ -4770,7 +4707,6 @@ void intel_modeset_cleanup(struct drm_device *dev)
 		del_timer_sync(&intel_crtc->idle_timer);
 	}
 
-	intel_increase_renderclock(dev, false);
 	del_timer_sync(&dev_priv->idle_timer);
 
 	if (dev_priv->display.disable_fbc)

drivers/gpu/drm/i915/intel_dp.c

@@ -1402,14 +1402,20 @@ intel_dp_init(struct drm_device *dev, int output_reg)
 			break;
 		case DP_B:
 		case PCH_DP_B:
+			dev_priv->hotplug_supported_mask |=
+				HDMIB_HOTPLUG_INT_STATUS;
 			name = "DPDDC-B";
 			break;
 		case DP_C:
 		case PCH_DP_C:
+			dev_priv->hotplug_supported_mask |=
+				HDMIC_HOTPLUG_INT_STATUS;
 			name = "DPDDC-C";
 			break;
 		case DP_D:
 		case PCH_DP_D:
+			dev_priv->hotplug_supported_mask |=
+				HDMID_HOTPLUG_INT_STATUS;
 			name = "DPDDC-D";
 			break;
 	}

drivers/gpu/drm/i915/intel_hdmi.c

@@ -303,21 +303,26 @@ void intel_hdmi_init(struct drm_device *dev, int sdvox_reg)
 	if (sdvox_reg == SDVOB) {
 		intel_output->clone_mask = (1 << INTEL_HDMIB_CLONE_BIT);
 		intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "HDMIB");
+		dev_priv->hotplug_supported_mask |= HDMIB_HOTPLUG_INT_STATUS;
 	} else if (sdvox_reg == SDVOC) {
 		intel_output->clone_mask = (1 << INTEL_HDMIC_CLONE_BIT);
 		intel_output->ddc_bus = intel_i2c_create(dev, GPIOD, "HDMIC");
+		dev_priv->hotplug_supported_mask |= HDMIC_HOTPLUG_INT_STATUS;
 	} else if (sdvox_reg == HDMIB) {
 		intel_output->clone_mask = (1 << INTEL_HDMID_CLONE_BIT);
 		intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOE,
 								"HDMIB");
+		dev_priv->hotplug_supported_mask |= HDMIB_HOTPLUG_INT_STATUS;
 	} else if (sdvox_reg == HDMIC) {
 		intel_output->clone_mask = (1 << INTEL_HDMIE_CLONE_BIT);
 		intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOD,
 								"HDMIC");
+		dev_priv->hotplug_supported_mask |= HDMIC_HOTPLUG_INT_STATUS;
 	} else if (sdvox_reg == HDMID) {
 		intel_output->clone_mask = (1 << INTEL_HDMIF_CLONE_BIT);
 		intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOF,
 								"HDMID");
+		dev_priv->hotplug_supported_mask |= HDMID_HOTPLUG_INT_STATUS;
 	}
 	if (!intel_output->ddc_bus)
 		goto err_connector;

drivers/gpu/drm/i915/intel_lvds.c

@@ -608,6 +608,13 @@ static const struct dmi_system_id bad_lid_status[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire one"),
 		},
 	},
+	{
+		.ident = "PC-81005",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MALATA"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "PC-81005"),
+		},
+	},
 	{ }
 };
 
@@ -679,7 +686,14 @@ static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
 	struct drm_i915_private *dev_priv =
 		container_of(nb, struct drm_i915_private, lid_notifier);
 	struct drm_device *dev = dev_priv->dev;
+	struct drm_connector *connector = dev_priv->int_lvds_connector;
 
+	/*
+	 * check and update the status of LVDS connector after receiving
+	 * the LID nofication event.
+	 */
+	if (connector)
+		connector->status = connector->funcs->detect(connector);
 	if (!acpi_lid_open()) {
 		dev_priv->modeset_on_lid = 1;
 		return NOTIFY_OK;
@@ -854,65 +868,6 @@ static const struct dmi_system_id intel_no_lvds[] = {
 	{ }	/* terminating entry */
 };
 
-#ifdef CONFIG_ACPI
-/*
- * check_lid_device -- check whether @handle is an ACPI LID device.
- * @handle: ACPI device handle
- * @level : depth in the ACPI namespace tree
- * @context: the number of LID device when we find the device
- * @rv: a return value to fill if desired (Not use)
- */
-static acpi_status
-check_lid_device(acpi_handle handle, u32 level, void *context,
-			void **return_value)
-{
-	struct acpi_device *acpi_dev;
-	int *lid_present = context;
-
-	acpi_dev = NULL;
-	/* Get the acpi device for device handle */
-	if (acpi_bus_get_device(handle, &acpi_dev) || !acpi_dev) {
-		/* If there is no ACPI device for handle, return */
-		return AE_OK;
-	}
-
-	if (!strncmp(acpi_device_hid(acpi_dev), "PNP0C0D", 7))
-		*lid_present = 1;
-
-	return AE_OK;
-}
-
-/**
- * check whether there exists the ACPI LID device by enumerating the ACPI
- * device tree.
- */
-static int intel_lid_present(void)
-{
-	int lid_present = 0;
-
-	if (acpi_disabled) {
-		/* If ACPI is disabled, there is no ACPI device tree to
-		 * check, so assume the LID device would have been present.
-		 */
-		return 1;
-	}
-
-	acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
-				ACPI_UINT32_MAX,
-				check_lid_device, NULL, &lid_present, NULL);
-
-	return lid_present;
-}
-#else
-static int intel_lid_present(void)
-{
-	/* In the absence of ACPI built in, assume that the LID device would
-	 * have been present.
-	 */
-	return 1;
-}
-#endif
-
 /**
  * intel_find_lvds_downclock - find the reduced downclock for LVDS in EDID
  * @dev: drm device
@@ -1031,12 +986,8 @@ void intel_lvds_init(struct drm_device *dev)
 	if (dmi_check_system(intel_no_lvds))
 		return;
 
-	/*
-	 * Assume LVDS is present if there's an ACPI lid device or if the
-	 * device is present in the VBT.
-	 */
-	if (!lvds_is_present_in_vbt(dev) && !intel_lid_present()) {
-		DRM_DEBUG_KMS("LVDS is not present in VBT and no lid detected\n");
+	if (!lvds_is_present_in_vbt(dev)) {
+		DRM_DEBUG_KMS("LVDS is not present in VBT\n");
 		return;
 	}
 
@@ -1180,6 +1131,8 @@ void intel_lvds_init(struct drm_device *dev)
 		DRM_DEBUG_KMS("lid notifier registration failed\n");
 		dev_priv->lid_notifier.notifier_call = NULL;
 	}
+	/* keep the LVDS connector */
+	dev_priv->int_lvds_connector = connector;
 	drm_sysfs_connector_add(connector);
 	return;
 

drivers/gpu/drm/i915/intel_sdvo.c

@@ -2662,6 +2662,7 @@ static void intel_sdvo_create_enhance_property(struct drm_connector *connector)
 
 bool intel_sdvo_init(struct drm_device *dev, int output_device)
 {
+	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_connector *connector;
 	struct intel_output *intel_output;
 	struct intel_sdvo_priv *sdvo_priv;
@@ -2708,10 +2709,12 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device)
 		intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOB DDC BUS");
 		sdvo_priv->analog_ddc_bus = intel_i2c_create(dev, GPIOA,
 						"SDVOB/VGA DDC BUS");
+		dev_priv->hotplug_supported_mask |= SDVOB_HOTPLUG_INT_STATUS;
 	} else {
 		intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOC DDC BUS");
 		sdvo_priv->analog_ddc_bus = intel_i2c_create(dev, GPIOA,
 						"SDVOC/VGA DDC BUS");
+		dev_priv->hotplug_supported_mask |= SDVOC_HOTPLUG_INT_STATUS;
 	}
 
 	if (intel_output->ddc_bus == NULL)

drivers/gpu/drm/i915/intel_tv.c

@@ -1840,6 +1840,8 @@ intel_tv_init(struct drm_device *dev)
 	drm_connector_attach_property(connector,
 				   dev->mode_config.tv_bottom_margin_property,
 				   tv_priv->margin[TV_MARGIN_BOTTOM]);
+
+	dev_priv->hotplug_supported_mask |= TV_HOTPLUG_INT_STATUS;
 out:
 	drm_sysfs_connector_add(connector);
 }

include/drm/i915_drm.h

@@ -188,6 +188,7 @@ typedef struct _drm_i915_sarea {
 #define DRM_I915_GEM_MADVISE	0x26
 #define DRM_I915_OVERLAY_PUT_IMAGE	0x27
 #define DRM_I915_OVERLAY_ATTRS	0x28
+#define DRM_I915_GEM_EXECBUFFER2	0x29
 
 #define DRM_IOCTL_I915_INIT		DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t)
 #define DRM_IOCTL_I915_FLUSH		DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH)
@@ -207,6 +208,7 @@ typedef struct _drm_i915_sarea {
 #define DRM_IOCTL_I915_VBLANK_SWAP	DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_VBLANK_SWAP, drm_i915_vblank_swap_t)
 #define DRM_IOCTL_I915_GEM_INIT		DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_INIT, struct drm_i915_gem_init)
 #define DRM_IOCTL_I915_GEM_EXECBUFFER	DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_EXECBUFFER, struct drm_i915_gem_execbuffer)
+#define DRM_IOCTL_I915_GEM_EXECBUFFER2	DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_EXECBUFFER2, struct drm_i915_gem_execbuffer2)
 #define DRM_IOCTL_I915_GEM_PIN		DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_PIN, struct drm_i915_gem_pin)
 #define DRM_IOCTL_I915_GEM_UNPIN	DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_UNPIN, struct drm_i915_gem_unpin)
 #define DRM_IOCTL_I915_GEM_BUSY		DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_BUSY, struct drm_i915_gem_busy)
@@ -272,6 +274,7 @@ typedef struct drm_i915_irq_wait {
 #define I915_PARAM_NUM_FENCES_AVAIL      6
 #define I915_PARAM_HAS_OVERLAY           7
 #define I915_PARAM_HAS_PAGEFLIPPING	 8
+#define I915_PARAM_HAS_EXECBUF2          9
 
 typedef struct drm_i915_getparam {
 	int param;
@@ -567,6 +570,57 @@ struct drm_i915_gem_execbuffer {
 	__u64 cliprects_ptr;
 };
 
+struct drm_i915_gem_exec_object2 {
+	/**
+	 * User's handle for a buffer to be bound into the GTT for this
+	 * operation.
+	 */
+	__u32 handle;
+
+	/** Number of relocations to be performed on this buffer */
+	__u32 relocation_count;
+	/**
+	 * Pointer to array of struct drm_i915_gem_relocation_entry containing
+	 * the relocations to be performed in this buffer.
+	 */
+	__u64 relocs_ptr;
+
+	/** Required alignment in graphics aperture */
+	__u64 alignment;
+
+	/**
+	 * Returned value of the updated offset of the object, for future
+	 * presumed_offset writes.
+	 */
+	__u64 offset;
+
+#define EXEC_OBJECT_NEEDS_FENCE (1<<0)
+	__u64 flags;
+	__u64 rsvd1;
+	__u64 rsvd2;
+};
+
+struct drm_i915_gem_execbuffer2 {
+	/**
+	 * List of gem_exec_object2 structs
+	 */
+	__u64 buffers_ptr;
+	__u32 buffer_count;
+
+	/** Offset in the batchbuffer to start execution from. */
+	__u32 batch_start_offset;
+	/** Bytes used in batchbuffer from batch_start_offset */
+	__u32 batch_len;
+	__u32 DR1;
+	__u32 DR4;
+	__u32 num_cliprects;
+	/** This is a struct drm_clip_rect *cliprects */
+	__u64 cliprects_ptr;
+	__u64 flags; /* currently unused */
+	__u64 rsvd1;
+	__u64 rsvd2;
+};
+
 struct drm_i915_gem_pin {
 	/** Handle of the buffer to be pinned. */
 	__u32 handle;