V4L/DVB (5218): Zl10353: register definitions update

Update the descriptions of "discovered" registers on the zl10353, using the
equivalaent mt352 register names.
Signed-off-by: NChris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/dvb/frontends/zl10353.c

@@ -258,9 +258,9 @@ static int zl10353_read_ber(struct dvb_frontend *fe, u32 *ber)
 {
 	struct zl10353_state *state = fe->demodulator_priv;
 
-	*ber = zl10353_read_register(state, 0x11) << 16 |
-	       zl10353_read_register(state, 0x12) << 8 |
-	       zl10353_read_register(state, 0x13);
+	*ber = zl10353_read_register(state, RS_ERR_CNT_2) << 16 |
+	       zl10353_read_register(state, RS_ERR_CNT_1) << 8 |
+	       zl10353_read_register(state, RS_ERR_CNT_0);
 
 	return 0;
 }
@@ -269,8 +269,8 @@ static int zl10353_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
 {
 	struct zl10353_state *state = fe->demodulator_priv;
 
-	u16 signal = zl10353_read_register(state, 0x0a) << 10 |
-		     zl10353_read_register(state, 0x0b) << 2 | 3;
+	u16 signal = zl10353_read_register(state, AGC_GAIN_1) << 10 |
+		     zl10353_read_register(state, AGC_GAIN_0) << 2 | 3;
 
 	*strength = ~signal;
 
@@ -295,8 +295,8 @@ static int zl10353_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
 {
 	struct zl10353_state *state = fe->demodulator_priv;
 
-	*ucblocks = zl10353_read_register(state, 0x14) << 8 |
-		    zl10353_read_register(state, 0x15);
+	*ucblocks = zl10353_read_register(state, RS_UBC_1) << 8 |
+		    zl10353_read_register(state, RS_UBC_0);
 
 	return 0;
 }

drivers/media/dvb/frontends/zl10353_priv.h

@@ -38,7 +38,14 @@ enum zl10353_reg_addr {
 	STATUS_7           = 0x07,
 	STATUS_8           = 0x08,
 	STATUS_9           = 0x09,
+	AGC_GAIN_1         = 0x0A,
+	AGC_GAIN_0         = 0x0B,
 	SNR                = 0x10,
+	RS_ERR_CNT_2       = 0x11,
+	RS_ERR_CNT_1       = 0x12,
+	RS_ERR_CNT_0       = 0x13,
+	RS_UBC_1           = 0x14,
+	RS_UBC_0           = 0x15,
 	TRL_NOMINAL_RATE_1 = 0x65,
 	TRL_NOMINAL_RATE_0 = 0x66,
 	CHIP_ID            = 0x7F,