提交 620a5568 编写于 作者: Z Zefir Kurtisi 提交者: John W. Linville

ath9k: fix/add bits for spectral scanning

Updates for spectral scanning register modification for AR93x:
 * fix bits for spectral_scan_count
 * add bits for new parameters
Signed-off-by: NZefir Kurtisi <zefir.kurtisi@neratec.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 27e49ca9
......@@ -820,18 +820,26 @@
#define AR_PHY_CHAN_INFO_MEMORY_CAPTURE_MASK 0x0001
#define AR_PHY_RX_DELAY_DELAY 0x00003FFF
#define AR_PHY_CCK_TX_CTRL_JAPAN 0x00000010
#define AR_PHY_SPECTRAL_SCAN_ENABLE 0x00000001
#define AR_PHY_SPECTRAL_SCAN_ENABLE_S 0
#define AR_PHY_SPECTRAL_SCAN_ACTIVE 0x00000002
#define AR_PHY_SPECTRAL_SCAN_ACTIVE_S 1
#define AR_PHY_SPECTRAL_SCAN_FFT_PERIOD 0x000000F0
#define AR_PHY_SPECTRAL_SCAN_FFT_PERIOD_S 4
#define AR_PHY_SPECTRAL_SCAN_PERIOD 0x0000FF00
#define AR_PHY_SPECTRAL_SCAN_PERIOD_S 8
#define AR_PHY_SPECTRAL_SCAN_COUNT 0x00FF0000
#define AR_PHY_SPECTRAL_SCAN_COUNT_S 16
#define AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT 0x01000000
#define AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT_S 24
#define AR_PHY_SPECTRAL_SCAN_ENABLE 0x00000001
#define AR_PHY_SPECTRAL_SCAN_ENABLE_S 0
#define AR_PHY_SPECTRAL_SCAN_ACTIVE 0x00000002
#define AR_PHY_SPECTRAL_SCAN_ACTIVE_S 1
#define AR_PHY_SPECTRAL_SCAN_FFT_PERIOD 0x000000F0
#define AR_PHY_SPECTRAL_SCAN_FFT_PERIOD_S 4
#define AR_PHY_SPECTRAL_SCAN_PERIOD 0x0000FF00
#define AR_PHY_SPECTRAL_SCAN_PERIOD_S 8
#define AR_PHY_SPECTRAL_SCAN_COUNT 0x0FFF0000
#define AR_PHY_SPECTRAL_SCAN_COUNT_S 16
#define AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT 0x10000000
#define AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT_S 28
#define AR_PHY_SPECTRAL_SCAN_PRIORITY 0x20000000
#define AR_PHY_SPECTRAL_SCAN_PRIORITY_S 29
#define AR_PHY_SPECTRAL_SCAN_USE_ERR5 0x40000000
#define AR_PHY_SPECTRAL_SCAN_USE_ERR5_S 30
#define AR_PHY_SPECTRAL_SCAN_COMPRESSED_RPT 0x80000000
#define AR_PHY_SPECTRAL_SCAN_COMPRESSED_RPT_S 31
#define AR_PHY_CHANNEL_STATUS_RX_CLEAR 0x00000004
#define AR_PHY_RTT_CTRL_ENA_RADIO_RETENTION 0x00000001
#define AR_PHY_RTT_CTRL_ENA_RADIO_RETENTION_S 0
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册