ath10k: indentation fixes

checkpatch found:

drivers/net/wireless/ath/ath10k/core.c:513: Alignment should match open parenthesis
drivers/net/wireless/ath/ath10k/core.c:1266: code indent should use tabs where possible
drivers/net/wireless/ath/ath10k/core.c:1267: code indent should use tabs where possible
drivers/net/wireless/ath/ath10k/core.c:1268: code indent should use tabs where possible
drivers/net/wireless/ath/ath10k/core.c:1269: code indent should use tabs where possible
drivers/net/wireless/ath/ath10k/mac.c:4659: Alignment should match open parenthesis
drivers/net/wireless/ath/ath10k/mac.c:6271: Alignment should match open parenthesis
drivers/net/wireless/ath/ath10k/pci.c:2260: Alignment should match open parenthesis
drivers/net/wireless/ath/ath10k/wmi.c:3510: Alignment should match open parenthesis
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

drivers/net/wireless/ath/ath10k/core.c

@@ -510,7 +510,7 @@ static int ath10k_download_fw(struct ath10k *ar, enum ath10k_firmware_mode mode)
 		data_len = ar->firmware_len;
 		mode_name = "normal";
 		ret = ath10k_swap_code_seg_configure(ar,
-				ATH10K_SWAP_CODE_SEG_BIN_TYPE_FW);
+						     ATH10K_SWAP_CODE_SEG_BIN_TYPE_FW);
 		if (ret) {
 			ath10k_err(ar, "failed to configure fw code swap: %d\n",
 				   ret);
@@ -1263,10 +1263,10 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode)
 		goto err;
 
 	/* Some of of qca988x solutions are having global reset issue
-         * during target initialization. Bypassing PLL setting before
-         * downloading firmware and letting the SoC run on REF_CLK is
-         * fixing the problem. Corresponding firmware change is also needed
-         * to set the clock source once the target is initialized.
+	 * during target initialization. Bypassing PLL setting before
+	 * downloading firmware and letting the SoC run on REF_CLK is
+	 * fixing the problem. Corresponding firmware change is also needed
+	 * to set the clock source once the target is initialized.
 	 */
 	if (test_bit(ATH10K_FW_FEATURE_SUPPORTS_SKIP_CLOCK_INIT,
 		     ar->fw_features)) {

drivers/net/wireless/ath/ath10k/mac.c

@@ -4656,7 +4656,7 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 						info->use_cts_prot ? 1 : 0);
 		if (ret)
 			ath10k_warn(ar, "failed to set protection mode %d on vdev %i: %d\n",
-					info->use_cts_prot, arvif->vdev_id, ret);
+				    info->use_cts_prot, arvif->vdev_id, ret);
 	}
 
 	if (changed & BSS_CHANGED_ERP_SLOT) {
@@ -6268,8 +6268,8 @@ ath10k_mac_update_rx_channel(struct ath10k *ar,
 	rcu_read_lock();
 	if (!ctx && ath10k_mac_num_chanctxs(ar) == 1) {
 		ieee80211_iter_chan_contexts_atomic(ar->hw,
-					ath10k_mac_get_any_chandef_iter,
-					&def);
+						    ath10k_mac_get_any_chandef_iter,
+						    &def);
 
 		if (vifs)
 			def = &vifs[0].new_ctx->def;

drivers/net/wireless/ath/ath10k/pci.c

@@ -2257,7 +2257,7 @@ static int ath10k_pci_qca6174_chip_reset(struct ath10k *ar)
 	ret = ath10k_pci_wait_for_target_init(ar);
 	if (ret) {
 		ath10k_warn(ar, "failed to wait for target after cold reset: %d\n",
-				ret);
+			    ret);
 		return ret;
 	}
 

drivers/net/wireless/ath/ath10k/wmi.c

@@ -3507,7 +3507,7 @@ void ath10k_wmi_event_spectral_scan(struct ath10k *ar,
 							  tsf);
 			if (res < 0) {
 				ath10k_dbg(ar, ATH10K_DBG_WMI, "failed to process fft report: %d\n",
-					    res);
+					   res);
 				return;
 			}
 			break;