rt2x00: Add link tuner safe RX toggle states

This adds 2 new states which both are used to toggle
the RX. These new states are required for usage
inside the link tuner thread, because the normal
RX toggling will stop the link tuner thread.
While it is possible that the link tuner thread itself
is the caller of the RX toggle (when using software
antenna diversity).
Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/rt2x00/rt2400pci.c

@@ -960,8 +960,12 @@ static int rt2400pci_set_device_state(struct rt2x00_dev *rt2x00dev,
 		rt2400pci_disable_radio(rt2x00dev);
 		break;
 	case STATE_RADIO_RX_ON:
+	case STATE_RADIO_RX_ON_LINK:
+		rt2400pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
+		break;
 	case STATE_RADIO_RX_OFF:
-		rt2400pci_toggle_rx(rt2x00dev, state);
+	case STATE_RADIO_RX_OFF_LINK:
+		rt2400pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
 		break;
 	case STATE_DEEP_SLEEP:
 	case STATE_SLEEP:

drivers/net/wireless/rt2x00/rt2500pci.c

@@ -1112,8 +1112,12 @@ static int rt2500pci_set_device_state(struct rt2x00_dev *rt2x00dev,
 		rt2500pci_disable_radio(rt2x00dev);
 		break;
 	case STATE_RADIO_RX_ON:
+	case STATE_RADIO_RX_ON_LINK:
+		rt2500pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
+		break;
 	case STATE_RADIO_RX_OFF:
-		rt2500pci_toggle_rx(rt2x00dev, state);
+	case STATE_RADIO_RX_OFF_LINK:
+		rt2500pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
 		break;
 	case STATE_DEEP_SLEEP:
 	case STATE_SLEEP:

drivers/net/wireless/rt2x00/rt2500usb.c

@@ -1001,8 +1001,12 @@ static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev,
 		rt2500usb_disable_radio(rt2x00dev);
 		break;
 	case STATE_RADIO_RX_ON:
+	case STATE_RADIO_RX_ON_LINK:
+		rt2500usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
+		break;
 	case STATE_RADIO_RX_OFF:
-		rt2500usb_toggle_rx(rt2x00dev, state);
+	case STATE_RADIO_RX_OFF_LINK:
+		rt2500usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
 		break;
 	case STATE_DEEP_SLEEP:
 	case STATE_SLEEP:

drivers/net/wireless/rt2x00/rt2x00config.c

@@ -102,7 +102,7 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
 	 * else the changes will be ignored by the device.
 	 */
 	if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
-		rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
+		rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF_LINK);
 
 	/*
 	 * Write new antenna setup to device and reset the link tuner.
@@ -116,7 +116,7 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
 	rt2x00dev->link.ant.active.tx = libconf.ant.tx;
 
 	if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
-		rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
+		rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON_LINK);
 }
 
 void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,

drivers/net/wireless/rt2x00/rt2x00reg.h

@@ -85,6 +85,8 @@ enum dev_state {
 	STATE_RADIO_OFF,
 	STATE_RADIO_RX_ON,
 	STATE_RADIO_RX_OFF,
+	STATE_RADIO_RX_ON_LINK,
+	STATE_RADIO_RX_OFF_LINK,
 	STATE_RADIO_IRQ_ON,
 	STATE_RADIO_IRQ_OFF,
 };

drivers/net/wireless/rt2x00/rt61pci.c

@@ -1482,8 +1482,12 @@ static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev,
 		rt61pci_disable_radio(rt2x00dev);
 		break;
 	case STATE_RADIO_RX_ON:
+	case STATE_RADIO_RX_ON_LINK:
+		rt61pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
+		break;
 	case STATE_RADIO_RX_OFF:
-		rt61pci_toggle_rx(rt2x00dev, state);
+	case STATE_RADIO_RX_OFF_LINK:
+		rt61pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
 		break;
 	case STATE_DEEP_SLEEP:
 	case STATE_SLEEP:

drivers/net/wireless/rt2x00/rt73usb.c

@@ -1208,8 +1208,12 @@ static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev,
 		rt73usb_disable_radio(rt2x00dev);
 		break;
 	case STATE_RADIO_RX_ON:
+	case STATE_RADIO_RX_ON_LINK:
+		rt73usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
+		break;
 	case STATE_RADIO_RX_OFF:
-		rt73usb_toggle_rx(rt2x00dev, state);
+	case STATE_RADIO_RX_OFF_LINK:
+		rt73usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
 		break;
 	case STATE_DEEP_SLEEP:
 	case STATE_SLEEP: