Merge tag 'for-linus' of git://github.com/openrisc/linux

Pull OpenRISC updates from Stafford Horne:
 "A few cleanups and compiler warning fixes for OpenRISC.

  Also, this includes dts and defconfig updates to enable Ethernet on
  OpenRISC/Litex FPGA SoC's now that the LiteEth driver has gone
  upstream"

* tag 'for-linus' of git://github.com/openrisc/linux:
  openrisc/litex: Update defconfig
  openrisc/litex: Add ethernet device
  openrisc/litex: Update uart address
  openrisc: Fix compiler warnings in setup
  openrisc: rename or32 code & comments to or1k
  openrisc: don't printk() unconditionally

arch/openrisc/boot/dts/or1klitex.dts

@@ -41,10 +41,10 @@
 		interrupt-controller;
 	};
 
-	serial0: serial@e0002000 {
+	serial0: serial@e0006800 {
 		device_type = "serial";
 		compatible = "litex,liteuart";
-		reg = <0xe0002000 0x100>;
+		reg = <0xe0006800 0x100>;
 	};
 
 	soc_ctrl0: soc_controller@e0000000 {
@@ -52,4 +52,13 @@
 			reg = <0xe0000000 0xc>;
 			status = "okay";
 	};
+
+	ethernet@e0001000 {
+		compatible = "litex,liteeth";
+		reg = <0xe0001000 0x7c>,
+		      <0xe0001800 0x0a>,
+		      <0x80000000 0x2000>;
+		reg-names = "mac", "mdio", "buffer";
+		interrupts = <2>;
+	};
 };

arch/openrisc/configs/or1klitex_defconfig

 CONFIG_BLK_DEV_INITRD=y
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
-CONFIG_BUG_ON_DATA_CORRUPTION=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_EMBEDDED=y
+CONFIG_OPENRISC_BUILTIN_DTB="or1klitex"
 CONFIG_HZ_100=y
-CONFIG_INITRAMFS_SOURCE="openrisc-rootfs.cpio.gz"
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_OF_OVERLAY=y
-CONFIG_OPENRISC_BUILTIN_DTB="or1klitex"
-CONFIG_PANIC_ON_OOPS=y
-CONFIG_PRINTK_TIME=y
-CONFIG_LITEX_SOC_CONTROLLER=y
+CONFIG_NETDEVICES=y
+CONFIG_LITEX_LITEETH=y
 CONFIG_SERIAL_LITEUART=y
 CONFIG_SERIAL_LITEUART_CONSOLE=y
-CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_TTY_PRINTK=y
+CONFIG_LITEX_SOC_CONTROLLER=y
+CONFIG_TMPFS=y
+CONFIG_PRINTK_TIME=y
+CONFIG_PANIC_ON_OOPS=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
+CONFIG_BUG_ON_DATA_CORRUPTION=y

arch/openrisc/include/asm/pgtable.h

@@ -12,7 +12,7 @@
  * et al.
  */
 
-/* or32 pgtable.h - macros and functions to manipulate page tables
+/* or1k pgtable.h - macros and functions to manipulate page tables
  *
  * Based on:
  * include/asm-cris/pgtable.h
@@ -29,14 +29,14 @@
 
 /*
  * The Linux memory management assumes a three-level page table setup. On
- * or32, we use that, but "fold" the mid level into the top-level page
+ * or1k, we use that, but "fold" the mid level into the top-level page
  * table. Since the MMU TLB is software loaded through an interrupt, it
  * supports any page table structure, so we could have used a three-level
  * setup, but for the amounts of memory we normally use, a two-level is
  * probably more efficient.
  *
  * This file contains the functions and defines necessary to modify and use
- * the or32 page table tree.
+ * the or1k page table tree.
  */
 
 extern void paging_init(void);

arch/openrisc/include/asm/setup.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2021 Stafford Horne
+ */
+#ifndef _ASM_OR1K_SETUP_H
+#define _ASM_OR1K_SETUP_H
+
+#include <linux/init.h>
+#include <asm-generic/setup.h>
+
+#ifndef __ASSEMBLY__
+void __init or1k_early_setup(void *fdt);
+#endif
+
+#endif /* _ASM_OR1K_SETUP_H */

arch/openrisc/include/asm/thread_info.h

@@ -25,7 +25,7 @@
 
 /* THREAD_SIZE is the size of the task_struct/kernel_stack combo.
  * normally, the stack is found by doing something like p + THREAD_SIZE
- * in or32, a page is 8192 bytes, which seems like a sane size
+ * in or1k, a page is 8192 bytes, which seems like a sane size
  */
 
 #define THREAD_SIZE_ORDER 0

arch/openrisc/kernel/entry.S

@@ -326,7 +326,7 @@ EXCEPTION_ENTRY(_data_page_fault_handler)
 1:	l.ori   r6,r0,0x0                  // !write access
 2:
 
-	/* call fault.c handler in or32/mm/fault.c */
+	/* call fault.c handler in openrisc/mm/fault.c */
 	l.jal   do_page_fault
 	 l.nop
 	l.j     _ret_from_exception
@@ -348,7 +348,7 @@ EXCEPTION_ENTRY(_insn_page_fault_handler)
 	/* r4 set be EXCEPTION_HANDLE */   // effective address of fault
 	l.ori	r6,r0,0x0		   // !write access
 
-	/* call fault.c handler in or32/mm/fault.c */
+	/* call fault.c handler in openrisc/mm/fault.c */
 	l.jal   do_page_fault
 	 l.nop
 	l.j     _ret_from_exception
@@ -547,6 +547,7 @@ EXCEPTION_ENTRY(_external_irq_handler)
 	l.bnf	1f			// ext irq enabled, all ok.
 	l.nop
 
+#ifdef CONFIG_PRINTK
 	l.addi  r1,r1,-0x8
 	l.movhi r3,hi(42f)
 	l.ori	r3,r3,lo(42f)
@@ -560,6 +561,7 @@ EXCEPTION_ENTRY(_external_irq_handler)
 		.string "\n\rESR interrupt bug: in _external_irq_handler (ESR %x)\n\r"
 		.align 4
 	.previous
+#endif
 
 	l.ori	r4,r4,SPR_SR_IEE	// fix the bug
 //	l.sw	PT_SR(r1),r4

arch/openrisc/kernel/head.S

@@ -599,7 +599,7 @@ flush_tlb:
 	l.jal	_flush_tlb
 	 l.nop
 
-/* The MMU needs to be enabled before or32_early_setup is called */
+/* The MMU needs to be enabled before or1k_early_setup is called */
 
 enable_mmu:
 	/*
@@ -641,9 +641,9 @@ enable_mmu:
 	/* magic number mismatch, set fdt pointer to null */
 	l.or	r25,r0,r0
 _fdt_found:
-	/* pass fdt pointer to or32_early_setup in r3 */
+	/* pass fdt pointer to or1k_early_setup in r3 */
 	l.or	r3,r0,r25
-	LOAD_SYMBOL_2_GPR(r24, or32_early_setup)
+	LOAD_SYMBOL_2_GPR(r24, or1k_early_setup)
 	l.jalr r24
 	 l.nop
 

arch/openrisc/kernel/setup.c

@@ -209,7 +209,8 @@ void __init setup_cpuinfo(void)
 }
 
 /**
- * or32_early_setup
+ * or1k_early_setup
+ * @fdt: pointer to the start of the device tree in memory or NULL
  *
  * Handles the pointer to the device tree that this kernel is to use
  * for establishing the available platform devices.
@@ -217,7 +218,7 @@ void __init setup_cpuinfo(void)
  * Falls back on built-in device tree in case null pointer is passed.
  */
 
-void __init or32_early_setup(void *fdt)
+void __init or1k_early_setup(void *fdt)
 {
 	if (fdt)
 		pr_info("FDT at %p\n", fdt);
@@ -243,21 +244,6 @@ static inline unsigned long extract_value(unsigned long reg, unsigned long mask)
 	return mask & reg;
 }
 
-void __init detect_unit_config(unsigned long upr, unsigned long mask,
-			       char *text, void (*func) (void))
-{
-	if (text != NULL)
-		printk("%s", text);
-
-	if (upr & mask) {
-		if (func != NULL)
-			func();
-		else
-			printk("present\n");
-	} else
-		printk("not present\n");
-}
-
 /*
  * calibrate_delay
  *

arch/openrisc/lib/Makefile

 # SPDX-License-Identifier: GPL-2.0-only
 #
-# Makefile for or32 specific library files..
+# Makefile for or1k specific library files..
 #
 
 obj-y	:= delay.o string.o memset.o memcpy.o

arch/openrisc/mm/fault.c

@@ -28,7 +28,7 @@ unsigned long pte_misses;	/* updated by do_page_fault() */
 unsigned long pte_errors;	/* updated by do_page_fault() */
 
 /* __PHX__ :: - check the vmalloc_fault in do_page_fault()
- *            - also look into include/asm-or32/mmu_context.h
+ *            - also look into include/asm/mmu_context.h
  */
 volatile pgd_t *current_pgd[NR_CPUS];