mtd: tests: mtd_nandbiterrs: replace msg macro with pr_{info,err}

Use pr_fmt instead of msg macro
Signed-off-by: NVikram Narayanan <vikram186@gmail.com>
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>

drivers/mtd/tests/mtd_nandbiterrs.c

@@ -39,6 +39,9 @@
  * this program; see the file COPYING. If not, write to the Free Software
  * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
@@ -47,8 +50,6 @@
 #include <linux/mtd/nand.h>
 #include <linux/slab.h>
 
-#define msg(FMT, VA...) pr_info("mtd_nandbiterrs: "FMT, ##VA)
-
 static int dev;
 module_param(dev, int, S_IRUGO);
 MODULE_PARM_DESC(dev, "MTD device number to use");
@@ -103,7 +104,7 @@ static int erase_block(void)
 	struct erase_info ei;
 	loff_t addr = eraseblock * mtd->erasesize;
 
-	msg("erase_block\n");
+	pr_info("erase_block\n");
 
 	memset(&ei, 0, sizeof(struct erase_info));
 	ei.mtd  = mtd;
@@ -112,7 +113,7 @@ static int erase_block(void)
 
 	err = mtd_erase(mtd, &ei);
 	if (err || ei.state == MTD_ERASE_FAILED) {
-		msg("error %d while erasing\n", err);
+		pr_err("error %d while erasing\n", err);
 		if (!err)
 			err = -EIO;
 		return err;
@@ -128,11 +129,11 @@ static int write_page(int log)
 	size_t written;
 
 	if (log)
-		msg("write_page\n");
+		pr_info("write_page\n");
 
 	err = mtd_write(mtd, offset, mtd->writesize, &written, wbuffer);
 	if (err || written != mtd->writesize) {
-		msg("error: write failed at %#llx\n", (long long)offset);
+		pr_err("error: write failed at %#llx\n", (long long)offset);
 		if (!err)
 			err = -EIO;
 	}
@@ -147,7 +148,7 @@ static int rewrite_page(int log)
 	struct mtd_oob_ops ops;
 
 	if (log)
-		msg("rewrite page\n");
+		pr_info("rewrite page\n");
 
 	ops.mode      = MTD_OPS_RAW; /* No ECC */
 	ops.len       = mtd->writesize;
@@ -160,7 +161,7 @@ static int rewrite_page(int log)
 
 	err = mtd_write_oob(mtd, offset, &ops);
 	if (err || ops.retlen != mtd->writesize) {
-		msg("error: write_oob failed (%d)\n", err);
+		pr_err("error: write_oob failed (%d)\n", err);
 		if (!err)
 			err = -EIO;
 	}
@@ -177,7 +178,7 @@ static int read_page(int log)
 	struct mtd_ecc_stats oldstats;
 
 	if (log)
-		msg("read_page\n");
+		pr_info("read_page\n");
 
 	/* Saving last mtd stats */
 	memcpy(&oldstats, &mtd->ecc_stats, sizeof(oldstats));
@@ -187,7 +188,7 @@ static int read_page(int log)
 		err = mtd->ecc_stats.corrected - oldstats.corrected;
 
 	if (err < 0 || read != mtd->writesize) {
-		msg("error: read failed at %#llx\n", (long long)offset);
+		pr_err("error: read failed at %#llx\n", (long long)offset);
 		if (err >= 0)
 			err = -EIO;
 	}
@@ -201,11 +202,11 @@ static int verify_page(int log)
 	unsigned i, errs = 0;
 
 	if (log)
-		msg("verify_page\n");
+		pr_info("verify_page\n");
 
 	for (i = 0; i < mtd->writesize; i++) {
 		if (rbuffer[i] != hash(i+seed)) {
-			msg("Error: page offset %u, expected %02x, got %02x\n",
+			pr_err("Error: page offset %u, expected %02x, got %02x\n",
 				i, hash(i+seed), rbuffer[i]);
 			errs++;
 		}
@@ -230,13 +231,13 @@ static int insert_biterror(unsigned byte)
 		for (bit = 7; bit >= 0; bit--) {
 			if (CBIT(wbuffer[byte], bit)) {
 				BCLR(wbuffer[byte], bit);
-				msg("Inserted biterror @ %u/%u\n", byte, bit);
+				pr_info("Inserted biterror @ %u/%u\n", byte, bit);
 				return 0;
 			}
 		}
 		byte++;
 	}
-	msg("biterror: Failed to find a '1' bit\n");
+	pr_err("biterror: Failed to find a '1' bit\n");
 	return -EIO;
 }
 
@@ -248,7 +249,7 @@ static int incremental_errors_test(void)
 	unsigned i;
 	unsigned errs_per_subpage = 0;
 
-	msg("incremental biterrors test\n");
+	pr_info("incremental biterrors test\n");
 
 	for (i = 0; i < mtd->writesize; i++)
 		wbuffer[i] = hash(i+seed);
@@ -265,9 +266,9 @@ static int incremental_errors_test(void)
 
 		err = read_page(1);
 		if (err > 0)
-			msg("Read reported %d corrected bit errors\n", err);
+			pr_info("Read reported %d corrected bit errors\n", err);
 		if (err < 0) {
-			msg("After %d biterrors per subpage, read reported error %d\n",
+			pr_err("After %d biterrors per subpage, read reported error %d\n",
 				errs_per_subpage, err);
 			err = 0;
 			goto exit;
@@ -275,11 +276,11 @@ static int incremental_errors_test(void)
 
 		err = verify_page(1);
 		if (err) {
-			msg("ECC failure, read data is incorrect despite read success\n");
+			pr_err("ECC failure, read data is incorrect despite read success\n");
 			goto exit;
 		}
 
-		msg("Successfully corrected %d bit errors per subpage\n",
+		pr_info("Successfully corrected %d bit errors per subpage\n",
 			errs_per_subpage);
 
 		for (i = 0; i < subcount; i++) {
@@ -311,7 +312,7 @@ static int overwrite_test(void)
 
 	memset(bitstats, 0, sizeof(bitstats));
 
-	msg("overwrite biterrors test\n");
+	pr_info("overwrite biterrors test\n");
 
 	for (i = 0; i < mtd->writesize; i++)
 		wbuffer[i] = hash(i+seed);
@@ -329,18 +330,18 @@ static int overwrite_test(void)
 		err = read_page(0);
 		if (err >= 0) {
 			if (err >= MAXBITS) {
-				msg("Implausible number of bit errors corrected\n");
+				pr_info("Implausible number of bit errors corrected\n");
 				err = -EIO;
 				break;
 			}
 			bitstats[err]++;
 			if (err > max_corrected) {
 				max_corrected = err;
-				msg("Read reported %d corrected bit errors\n",
+				pr_info("Read reported %d corrected bit errors\n",
 					err);
 			}
 		} else { /* err < 0 */
-			msg("Read reported error %d\n", err);
+			pr_info("Read reported error %d\n", err);
 			err = 0;
 			break;
 		}
@@ -348,7 +349,7 @@ static int overwrite_test(void)
 		err = verify_page(0);
 		if (err) {
 			bitstats[max_corrected] = opno;
-			msg("ECC failure, read data is incorrect despite read success\n");
+			pr_info("ECC failure, read data is incorrect despite read success\n");
 			break;
 		}
 
@@ -357,9 +358,9 @@ static int overwrite_test(void)
 
 	/* At this point bitstats[0] contains the number of ops with no bit
 	 * errors, bitstats[1] the number of ops with 1 bit error, etc. */
-	msg("Bit error histogram (%d operations total):\n", opno);
+	pr_info("Bit error histogram (%d operations total):\n", opno);
 	for (i = 0; i < max_corrected; i++)
-		msg("Page reads with %3d corrected bit errors: %d\n",
+		pr_info("Page reads with %3d corrected bit errors: %d\n",
 			i, bitstats[i]);
 
 exit:
@@ -370,36 +371,36 @@ static int __init mtd_nandbiterrs_init(void)
 {
 	int err = 0;
 
-	msg("\n");
-	msg("==================================================\n");
-	msg("MTD device: %d\n", dev);
+	printk("\n");
+	printk(KERN_INFO "==================================================\n");
+	pr_info("MTD device: %d\n", dev);
 
 	mtd = get_mtd_device(NULL, dev);
 	if (IS_ERR(mtd)) {
 		err = PTR_ERR(mtd);
-		msg("error: cannot get MTD device\n");
+		pr_err("error: cannot get MTD device\n");
 		goto exit_mtddev;
 	}
 
 	if (mtd->type != MTD_NANDFLASH) {
-		msg("this test requires NAND flash\n");
+		pr_info("this test requires NAND flash\n");
 		err = -ENODEV;
 		goto exit_nand;
 	}
 
-	msg("MTD device size %llu, eraseblock=%u, page=%u, oob=%u\n",
+	pr_info("MTD device size %llu, eraseblock=%u, page=%u, oob=%u\n",
 		(unsigned long long)mtd->size, mtd->erasesize,
 		mtd->writesize, mtd->oobsize);
 
 	subsize  = mtd->writesize >> mtd->subpage_sft;
 	subcount = mtd->writesize / subsize;
 
-	msg("Device uses %d subpages of %d bytes\n", subcount, subsize);
+	pr_info("Device uses %d subpages of %d bytes\n", subcount, subsize);
 
 	offset     = page_offset * mtd->writesize;
 	eraseblock = mtd_div_by_eb(offset, mtd);
 
-	msg("Using page=%u, offset=%llu, eraseblock=%u\n",
+	pr_info("Using page=%u, offset=%llu, eraseblock=%u\n",
 		page_offset, offset, eraseblock);
 
 	wbuffer = kmalloc(mtd->writesize, GFP_KERNEL);
@@ -432,8 +433,8 @@ static int __init mtd_nandbiterrs_init(void)
 		goto exit_error;
 
 	err = -EIO;
-	msg("finished successfully.\n");
-	msg("==================================================\n");
+	pr_info("finished successfully.\n");
+	printk(KERN_INFO "==================================================\n");
 
 exit_error:
 	kfree(rbuffer);